AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Class: AWS.CodePipeline

Inherits:
AWS.Service show all
Identifier:
codepipeline
API Version:
2015-07-09
Defined in:
(unknown)

Overview

Constructs a service interface object. Each API operation is exposed as a function on service.

Service Description

Overview

This is the AWS CodePipeline API Reference. This guide provides descriptions of the actions and data types for AWS CodePipeline. Some functionality for your pipeline can only be configured through the API. For more information, see the AWS CodePipeline User Guide.

You can use the AWS CodePipeline API to work with pipelines, stages, actions, and transitions.

Pipelines are models of automated release processes. Each pipeline is uniquely named, and consists of stages, actions, and transitions.

You can work with pipelines by calling:

  • CreatePipeline, which creates a uniquely named pipeline.

  • DeletePipeline, which deletes the specified pipeline.

  • GetPipeline, which returns information about the pipeline structure and pipeline metadata, including the pipeline Amazon Resource Name (ARN).

  • GetPipelineExecution, which returns information about a specific execution of a pipeline.

  • GetPipelineState, which returns information about the current state of the stages and actions of a pipeline.

  • ListActionExecutions, which returns action-level details for past executions. The details include full stage and action-level details, including individual action duration, status, any errors that occurred during the execution, and input and output artifact location details.

  • ListPipelines, which gets a summary of all of the pipelines associated with your account.

  • ListPipelineExecutions, which gets a summary of the most recent executions for a pipeline.

  • StartPipelineExecution, which runs the most recent revision of an artifact through the pipeline.

  • UpdatePipeline, which updates a pipeline with edits or changes to the structure of the pipeline.

Pipelines include stages. Each stage contains one or more actions that must complete before the next stage begins. A stage results in success or failure. If a stage fails, the pipeline stops at that stage and remains stopped until either a new version of an artifact appears in the source location, or a user takes action to rerun the most recent artifact through the pipeline. You can call GetPipelineState, which displays the status of a pipeline, including the status of stages in the pipeline, or GetPipeline, which returns the entire structure of the pipeline, including the stages of that pipeline. For more information about the structure of stages and actions, see AWS CodePipeline Pipeline Structure Reference.

Pipeline stages include actions that are categorized into categories such as source or build actions performed in a stage of a pipeline. For example, you can use a source action to import artifacts into a pipeline from a source such as Amazon S3. Like stages, you do not work with actions directly in most cases, but you do define and interact with actions when working with pipeline operations such as CreatePipeline and GetPipelineState. Valid action categories are:

  • Source

  • Build

  • Test

  • Deploy

  • Approval

  • Invoke

Pipelines also include transitions, which allow the transition of artifacts from one stage to the next in a pipeline after the actions in one stage complete.

You can work with transitions by calling:

Using the API to integrate with AWS CodePipeline

For third-party integrators or developers who want to create their own integrations with AWS CodePipeline, the expected sequence varies from the standard API user. To integrate with AWS CodePipeline, developers need to work with the following items:

Jobs, which are instances of an action. For example, a job for a source action might import a revision of an artifact from a source.

You can work with jobs by calling:

Third party jobs, which are instances of an action created by a partner action and integrated into AWS CodePipeline. Partner actions are created by members of the AWS Partner Network.

You can work with third party jobs by calling:

Sending a Request Using CodePipeline

var codepipeline = new AWS.CodePipeline();
codepipeline.acknowledgeJob(params, function (err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Locking the API Version

In order to ensure that the CodePipeline object uses this specific API, you can construct the object by passing the apiVersion option to the constructor:

var codepipeline = new AWS.CodePipeline({apiVersion: '2015-07-09'});

You can also set the API version globally in AWS.config.apiVersions using the codepipeline service identifier:

AWS.config.apiVersions = {
  codepipeline: '2015-07-09',
  // other service API versions
};

var codepipeline = new AWS.CodePipeline();

Version:

  • 2015-07-09

Constructor Summary collapse

Property Summary collapse

Properties inherited from AWS.Service

apiVersions

Method Summary collapse

Methods inherited from AWS.Service

makeRequest, makeUnauthenticatedRequest, waitFor, setupRequestListeners, defineService

Constructor Details

new AWS.CodePipeline(options = {}) ⇒ Object

Constructs a service object. This object has one method for each API operation.

Examples:

Constructing a CodePipeline object

var codepipeline = new AWS.CodePipeline({apiVersion: '2015-07-09'});

Options Hash (options):

  • params (map)

    An optional map of parameters to bind to every request sent by this service object. For more information on bound parameters, see "Working with Services" in the Getting Started Guide.

  • endpoint (String)

    The endpoint URI to send requests to. The default endpoint is built from the configured region. The endpoint should be a string like 'https://{service}.{region}.amazonaws.com'.

  • accessKeyId (String)

    your AWS access key ID.

  • secretAccessKey (String)

    your AWS secret access key.

  • sessionToken (AWS.Credentials)

    the optional AWS session token to sign requests with.

  • credentials (AWS.Credentials)

    the AWS credentials to sign requests with. You can either specify this object, or specify the accessKeyId and secretAccessKey options directly.

  • credentialProvider (AWS.CredentialProviderChain)

    the provider chain used to resolve credentials if no static credentials property is set.

  • region (String)

    the region to send service requests to. See AWS.CodePipeline.region for more information.

  • maxRetries (Integer)

    the maximum amount of retries to attempt with a request. See AWS.CodePipeline.maxRetries for more information.

  • maxRedirects (Integer)

    the maximum amount of redirects to follow with a request. See AWS.CodePipeline.maxRedirects for more information.

  • sslEnabled (Boolean)

    whether to enable SSL for requests.

  • paramValidation (Boolean|map)

    whether input parameters should be validated against the operation description before sending the request. Defaults to true. Pass a map to enable any of the following specific validation features:

    • min [Boolean] — Validates that a value meets the min constraint. This is enabled by default when paramValidation is set to true.
    • max [Boolean] — Validates that a value meets the max constraint.
    • pattern [Boolean] — Validates that a string value matches a regular expression.
    • enum [Boolean] — Validates that a string value matches one of the allowable enum values.
  • computeChecksums (Boolean)

    whether to compute checksums for payload bodies when the service accepts it (currently supported in S3 only)

  • convertResponseTypes (Boolean)

    whether types are converted when parsing response data. Currently only supported for JSON based services. Turning this off may improve performance on large response payloads. Defaults to true.

  • correctClockSkew (Boolean)

    whether to apply a clock skew correction and retry requests that fail because of an skewed client clock. Defaults to false.

  • s3ForcePathStyle (Boolean)

    whether to force path style URLs for S3 objects.

  • s3BucketEndpoint (Boolean)

    whether the provided endpoint addresses an individual bucket (false if it addresses the root API endpoint). Note that setting this configuration option requires an endpoint to be provided explicitly to the service constructor.

  • s3DisableBodySigning (Boolean)

    whether S3 body signing should be disabled when using signature version v4. Body signing can only be disabled when using https. Defaults to true.

  • retryDelayOptions (map)

    A set of options to configure the retry delay on retryable errors. Currently supported options are:

    • base [Integer] — The base number of milliseconds to use in the exponential backoff for operation retries. Defaults to 100 ms for all services except DynamoDB, where it defaults to 50ms.
    • customBackoff [function] — A custom function that accepts a retry count and error and returns the amount of time to delay in milliseconds. If the result is a non-zero negative value, no further retry attempts will be made. The base option will be ignored if this option is supplied.
  • httpOptions (map)

    A set of options to pass to the low-level HTTP request. Currently supported options are:

    • proxy [String] — the URL to proxy requests through
    • agent [http.Agent, https.Agent] — the Agent object to perform HTTP requests with. Used for connection pooling. Defaults to the global agent (http.globalAgent) for non-SSL connections. Note that for SSL connections, a special Agent object is used in order to enable peer certificate verification. This feature is only available in the Node.js environment.
    • connectTimeout [Integer] — Sets the socket to timeout after failing to establish a connection with the server after connectTimeout milliseconds. This timeout has no effect once a socket connection has been established.
    • timeout [Integer] — Sets the socket to timeout after timeout milliseconds of inactivity on the socket. Defaults to two minutes (120000).
    • xhrAsync [Boolean] — Whether the SDK will send asynchronous HTTP requests. Used in the browser environment only. Set to false to send requests synchronously. Defaults to true (async on).
    • xhrWithCredentials [Boolean] — Sets the "withCredentials" property of an XMLHttpRequest object. Used in the browser environment only. Defaults to false.
  • apiVersion (String, Date)

    a String in YYYY-MM-DD format (or a date) that represents the latest possible API version that can be used in all services (unless overridden by apiVersions). Specify 'latest' to use the latest possible version.

  • apiVersions (map<String, String|Date>)

    a map of service identifiers (the lowercase service class name) with the API version to use when instantiating a service. Specify 'latest' for each individual that can use the latest available version.

  • logger (#write, #log)

    an object that responds to .write() (like a stream) or .log() (like the console object) in order to log information about requests

  • systemClockOffset (Number)

    an offset value in milliseconds to apply to all signing times. Use this to compensate for clock skew when your system may be out of sync with the service time. Note that this configuration option can only be applied to the global AWS.config object and cannot be overridden in service-specific configuration. Defaults to 0 milliseconds.

  • signatureVersion (String)

    the signature version to sign requests with (overriding the API configuration). Possible values are: 'v2', 'v3', 'v4'.

  • signatureCache (Boolean)

    whether the signature to sign requests with (overriding the API configuration) is cached. Only applies to the signature version 'v4'. Defaults to true.

  • dynamoDbCrc32 (Boolean)

    whether to validate the CRC32 checksum of HTTP response bodies returned by DynamoDB. Default: true.

  • useAccelerateEndpoint (Boolean)

    Whether to use the S3 Transfer Acceleration endpoint with the S3 service. Default: false.

  • clientSideMonitoring (Boolean)

    whether to collect and publish this client's performance metrics of all its API requests.

  • endpointDiscoveryEnabled (Boolean)

    whether to enable endpoint discovery for operations that allow optionally using an endpoint returned by the service. Defaults to 'false'

  • endpointCacheSize (Number)

    the size of the global cache storing endpoints from endpoint discovery operations. Once endpoint cache is created, updating this setting cannot change existing cache size. Defaults to 1000

  • hostPrefixEnabled (Boolean)

    whether to marshal request parameters to the prefix of hostname. Defaults to true.

  • stsRegionalEndpoints ('legacy'|'regional')

    whether to send sts request to global endpoints or regional endpoints. Defaults to 'legacy'.

Property Details

endpointAWS.Endpoint (readwrite)

Returns an Endpoint object representing the endpoint URL for service requests.

Returns:

  • (AWS.Endpoint)

    an Endpoint object representing the endpoint URL for service requests.

Method Details

acknowledgeJob(params = {}, callback) ⇒ AWS.Request

Returns information about a specified job and whether that job has been received by the job worker. Used for custom actions only.

Service Reference:

Examples:

Calling the acknowledgeJob operation

var params = {
  jobId: 'STRING_VALUE', /* required */
  nonce: 'STRING_VALUE' /* required */
};
codepipeline.acknowledgeJob(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The unique system-generated ID of the job for which you want to confirm receipt.

    • nonce — (String)

      A system-generated random number that AWS CodePipeline uses to ensure that the job is being worked on by only one job worker. Get this number from the response of the PollForJobs request that returned this job.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • status — (String)

        Whether the job worker has received the specified job.

        Possible values include:
        • "Created"
        • "Queued"
        • "Dispatched"
        • "InProgress"
        • "TimedOut"
        • "Succeeded"
        • "Failed"

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

acknowledgeThirdPartyJob(params = {}, callback) ⇒ AWS.Request

Confirms a job worker has received the specified job. Used for partner actions only.

Service Reference:

Examples:

Calling the acknowledgeThirdPartyJob operation

var params = {
  clientToken: 'STRING_VALUE', /* required */
  jobId: 'STRING_VALUE', /* required */
  nonce: 'STRING_VALUE' /* required */
};
codepipeline.acknowledgeThirdPartyJob(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The unique system-generated ID of the job.

    • nonce — (String)

      A system-generated random number that AWS CodePipeline uses to ensure that the job is being worked on by only one job worker. Get this number from the response to a GetThirdPartyJobDetails request.

    • clientToken — (String)

      The clientToken portion of the clientId and clientToken pair used to verify that the calling entity is allowed access to the job and its details.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • status — (String)

        The status information for the third party job, if any.

        Possible values include:
        • "Created"
        • "Queued"
        • "Dispatched"
        • "InProgress"
        • "TimedOut"
        • "Succeeded"
        • "Failed"

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

createCustomActionType(params = {}, callback) ⇒ AWS.Request

Creates a new custom action that can be used in all pipelines associated with the AWS account. Only used for custom actions.

Service Reference:

Examples:

Calling the createCustomActionType operation

var params = {
  category: Source | Build | Deploy | Test | Invoke | Approval, /* required */
  inputArtifactDetails: { /* required */
    maximumCount: 'NUMBER_VALUE', /* required */
    minimumCount: 'NUMBER_VALUE' /* required */
  },
  outputArtifactDetails: { /* required */
    maximumCount: 'NUMBER_VALUE', /* required */
    minimumCount: 'NUMBER_VALUE' /* required */
  },
  provider: 'STRING_VALUE', /* required */
  version: 'STRING_VALUE', /* required */
  configurationProperties: [
    {
      key: true || false, /* required */
      name: 'STRING_VALUE', /* required */
      required: true || false, /* required */
      secret: true || false, /* required */
      description: 'STRING_VALUE',
      queryable: true || false,
      type: String | Number | Boolean
    },
    /* more items */
  ],
  settings: {
    entityUrlTemplate: 'STRING_VALUE',
    executionUrlTemplate: 'STRING_VALUE',
    revisionUrlTemplate: 'STRING_VALUE',
    thirdPartyConfigurationUrl: 'STRING_VALUE'
  },
  tags: [
    {
      key: 'STRING_VALUE', /* required */
      value: 'STRING_VALUE' /* required */
    },
    /* more items */
  ]
};
codepipeline.createCustomActionType(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • category — (String)

      The category of the custom action, such as a build action or a test action.

      Note: Although Source and Approval are listed as valid values, they are not currently functional. These values are reserved for future use.
      Possible values include:
      • "Source"
      • "Build"
      • "Deploy"
      • "Test"
      • "Invoke"
      • "Approval"
    • provider — (String)

      The provider of the service used in the custom action, such as AWS CodeDeploy.

    • version — (String)

      The version identifier of the custom action.

    • settings — (map)

      URLs that provide users information about this custom action.

      • thirdPartyConfigurationUrl — (String)

        The URL of a sign-up page where users can sign up for an external service and perform initial configuration of the action provided by that service.

      • entityUrlTemplate — (String)

        The URL returned to the AWS CodePipeline console that provides a deep link to the resources of the external system, such as the configuration page for an AWS CodeDeploy deployment group. This link is provided as part of the action display in the pipeline.

      • executionUrlTemplate — (String)

        The URL returned to the AWS CodePipeline console that contains a link to the top-level landing page for the external system, such as the console page for AWS CodeDeploy. This link is shown on the pipeline view page in the AWS CodePipeline console and provides a link to the execution entity of the external action.

      • revisionUrlTemplate — (String)

        The URL returned to the AWS CodePipeline console that contains a link to the page where customers can update or change the configuration of the external action.

    • configurationProperties — (Array<map>)

      The configuration properties for the custom action.

      Note: You can refer to a name in the configuration properties of the custom action within the URL templates by following the format of {Config:name}, as long as the configuration property is both required and not secret. For more information, see Create a Custom Action for a Pipeline.
      • namerequired — (String)

        The name of the action configuration property.

      • requiredrequired — (Boolean)

        Whether the configuration property is a required value.

      • keyrequired — (Boolean)

        Whether the configuration property is a key.

      • secretrequired — (Boolean)

        Whether the configuration property is secret. Secrets are hidden from all calls except for GetJobDetails, GetThirdPartyJobDetails, PollForJobs, and PollForThirdPartyJobs.

        When updating a pipeline, passing * * * * * without changing any other values of the action preserves the previous value of the secret.

      • queryable — (Boolean)

        Indicates that the property is used with PollForJobs. When creating a custom action, an action can have up to one queryable property. If it has one, that property must be both required and not secret.

        If you create a pipeline with a custom action type, and that custom action contains a queryable property, the value for that configuration property is subject to other restrictions. The value must be less than or equal to twenty (20) characters. The value can contain only alphanumeric characters, underscores, and hyphens.

      • description — (String)

        The description of the action configuration property that is displayed to users.

      • type — (String)

        The type of the configuration property.

        Possible values include:
        • "String"
        • "Number"
        • "Boolean"
    • inputArtifactDetails — (map)

      The details of the input artifact for the action, such as its commit ID.

      • minimumCountrequired — (Integer)

        The minimum number of artifacts allowed for the action type.

      • maximumCountrequired — (Integer)

        The maximum number of artifacts allowed for the action type.

    • outputArtifactDetails — (map)

      The details of the output artifact of the action, such as its commit ID.

      • minimumCountrequired — (Integer)

        The minimum number of artifacts allowed for the action type.

      • maximumCountrequired — (Integer)

        The maximum number of artifacts allowed for the action type.

    • tags — (Array<map>)

      The tags for the custom action.

      • keyrequired — (String)

        The tag's key.

      • valuerequired — (String)

        The tag's value.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • actionType — (map)

        Returns information about the details of an action type.

        • idrequired — (map)

          Represents information about an action type.

          • categoryrequired — (String)

            A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

            Possible values include:
            • "Source"
            • "Build"
            • "Deploy"
            • "Test"
            • "Invoke"
            • "Approval"
          • ownerrequired — (String)

            The creator of the action being called.

            Possible values include:
            • "AWS"
            • "ThirdParty"
            • "Custom"
          • providerrequired — (String)

            The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

          • versionrequired — (String)

            A string that describes the action version.

        • settings — (map)

          The settings for the action type.

          • thirdPartyConfigurationUrl — (String)

            The URL of a sign-up page where users can sign up for an external service and perform initial configuration of the action provided by that service.

          • entityUrlTemplate — (String)

            The URL returned to the AWS CodePipeline console that provides a deep link to the resources of the external system, such as the configuration page for an AWS CodeDeploy deployment group. This link is provided as part of the action display in the pipeline.

          • executionUrlTemplate — (String)

            The URL returned to the AWS CodePipeline console that contains a link to the top-level landing page for the external system, such as the console page for AWS CodeDeploy. This link is shown on the pipeline view page in the AWS CodePipeline console and provides a link to the execution entity of the external action.

          • revisionUrlTemplate — (String)

            The URL returned to the AWS CodePipeline console that contains a link to the page where customers can update or change the configuration of the external action.

        • actionConfigurationProperties — (Array<map>)

          The configuration properties for the action type.

          • namerequired — (String)

            The name of the action configuration property.

          • requiredrequired — (Boolean)

            Whether the configuration property is a required value.

          • keyrequired — (Boolean)

            Whether the configuration property is a key.

          • secretrequired — (Boolean)

            Whether the configuration property is secret. Secrets are hidden from all calls except for GetJobDetails, GetThirdPartyJobDetails, PollForJobs, and PollForThirdPartyJobs.

            When updating a pipeline, passing * * * * * without changing any other values of the action preserves the previous value of the secret.

          • queryable — (Boolean)

            Indicates that the property is used with PollForJobs. When creating a custom action, an action can have up to one queryable property. If it has one, that property must be both required and not secret.

            If you create a pipeline with a custom action type, and that custom action contains a queryable property, the value for that configuration property is subject to other restrictions. The value must be less than or equal to twenty (20) characters. The value can contain only alphanumeric characters, underscores, and hyphens.

          • description — (String)

            The description of the action configuration property that is displayed to users.

          • type — (String)

            The type of the configuration property.

            Possible values include:
            • "String"
            • "Number"
            • "Boolean"
        • inputArtifactDetailsrequired — (map)

          The details of the input artifact for the action, such as its commit ID.

          • minimumCountrequired — (Integer)

            The minimum number of artifacts allowed for the action type.

          • maximumCountrequired — (Integer)

            The maximum number of artifacts allowed for the action type.

        • outputArtifactDetailsrequired — (map)

          The details of the output artifact of the action, such as its commit ID.

          • minimumCountrequired — (Integer)

            The minimum number of artifacts allowed for the action type.

          • maximumCountrequired — (Integer)

            The maximum number of artifacts allowed for the action type.

      • tags — (Array<map>)

        Specifies the tags applied to the custom action.

        • keyrequired — (String)

          The tag's key.

        • valuerequired — (String)

          The tag's value.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

createPipeline(params = {}, callback) ⇒ AWS.Request

Creates a pipeline.

Note: In the pipeline structure, you must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.

Service Reference:

Examples:

Calling the createPipeline operation

var params = {
  pipeline: { /* required */
    name: 'STRING_VALUE', /* required */
    roleArn: 'STRING_VALUE', /* required */
    stages: [ /* required */
      {
        actions: [ /* required */
          {
            actionTypeId: { /* required */
              category: Source | Build | Deploy | Test | Invoke | Approval, /* required */
              owner: AWS | ThirdParty | Custom, /* required */
              provider: 'STRING_VALUE', /* required */
              version: 'STRING_VALUE' /* required */
            },
            name: 'STRING_VALUE', /* required */
            configuration: {
              '<ActionConfigurationKey>': 'STRING_VALUE',
              /* '<ActionConfigurationKey>': ... */
            },
            inputArtifacts: [
              {
                name: 'STRING_VALUE' /* required */
              },
              /* more items */
            ],
            namespace: 'STRING_VALUE',
            outputArtifacts: [
              {
                name: 'STRING_VALUE' /* required */
              },
              /* more items */
            ],
            region: 'STRING_VALUE',
            roleArn: 'STRING_VALUE',
            runOrder: 'NUMBER_VALUE'
          },
          /* more items */
        ],
        name: 'STRING_VALUE', /* required */
        blockers: [
          {
            name: 'STRING_VALUE', /* required */
            type: Schedule /* required */
          },
          /* more items */
        ]
      },
      /* more items */
    ],
    artifactStore: {
      location: 'STRING_VALUE', /* required */
      type: S3, /* required */
      encryptionKey: {
        id: 'STRING_VALUE', /* required */
        type: KMS /* required */
      }
    },
    artifactStores: {
      '<AWSRegionName>': {
        location: 'STRING_VALUE', /* required */
        type: S3, /* required */
        encryptionKey: {
          id: 'STRING_VALUE', /* required */
          type: KMS /* required */
        }
      },
      /* '<AWSRegionName>': ... */
    },
    version: 'NUMBER_VALUE'
  },
  tags: [
    {
      key: 'STRING_VALUE', /* required */
      value: 'STRING_VALUE' /* required */
    },
    /* more items */
  ]
};
codepipeline.createPipeline(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipeline — (map)

      Represents the structure of actions and stages to be performed in the pipeline.

      • namerequired — (String)

        The name of the action to be performed.

      • roleArnrequired — (String)

        The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.

      • artifactStore — (map)

        Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.

        Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
        • typerequired — (String)

          The type of the artifact store, such as S3.

          Possible values include:
          • "S3"
        • locationrequired — (String)

          The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

        • encryptionKey — (map)

          The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

          • idrequired — (String)

            The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

            Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
          • typerequired — (String)

            The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

            Possible values include:
            • "KMS"
      • artifactStores — (map<map>)

        A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline.

        Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
        • typerequired — (String)

          The type of the artifact store, such as S3.

          Possible values include:
          • "S3"
        • locationrequired — (String)

          The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

        • encryptionKey — (map)

          The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

          • idrequired — (String)

            The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

            Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
          • typerequired — (String)

            The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

            Possible values include:
            • "KMS"
      • stagesrequired — (Array<map>)

        The stage in which to perform the action.

        • namerequired — (String)

          The name of the stage.

        • blockers — (Array<map>)

          Reserved for future use.

          • namerequired — (String)

            Reserved for future use.

          • typerequired — (String)

            Reserved for future use.

            Possible values include:
            • "Schedule"
        • actionsrequired — (Array<map>)

          The actions included in a stage.

          • namerequired — (String)

            The action declaration's name.

          • actionTypeIdrequired — (map)

            Specifies the action type and the provider of the action.

            • categoryrequired — (String)

              A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

              Possible values include:
              • "Source"
              • "Build"
              • "Deploy"
              • "Test"
              • "Invoke"
              • "Approval"
            • ownerrequired — (String)

              The creator of the action being called.

              Possible values include:
              • "AWS"
              • "ThirdParty"
              • "Custom"
            • providerrequired — (String)

              The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

            • versionrequired — (String)

              A string that describes the action version.

          • runOrder — (Integer)

            The order in which actions are run.

          • configuration — (map<String>)

            The action's configuration. These are key-value pairs that specify input values for an action. For more information, see Action Structure Requirements in CodePipeline. For the list of configuration properties for the AWS CloudFormation action type in CodePipeline, see Configuration Properties Reference in the AWS CloudFormation User Guide. For template snippets with examples, see Using Parameter Override Functions with CodePipeline Pipelines in the AWS CloudFormation User Guide.

            The values can be represented in either JSON or YAML format. For example, the JSON configuration item format is as follows:

            JSON:

            "Configuration" : { Key : Value },

          • outputArtifacts — (Array<map>)

            The name or ID of the result of the action declaration, such as a test or build artifact.

            • namerequired — (String)

              The name of the output of an artifact, such as "My App".

              The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

              Output artifact names must be unique within a pipeline.

          • inputArtifacts — (Array<map>)

            The name or ID of the artifact consumed by the action, such as a test or build artifact.

            • namerequired — (String)

              The name of the artifact to be worked on (for example, "My App").

              The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

          • roleArn — (String)

            The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline.

          • region — (String)

            The action declaration's AWS Region, such as us-east-1.

          • namespace — (String)

            The variable namespace associated with the action. All variables produced as output by this action fall under this namespace.

      • version — (Integer)

        The version number of the pipeline. A new pipeline always has a version number of 1. This number is incremented when a pipeline is updated.

    • tags — (Array<map>)

      The tags for the pipeline.

      • keyrequired — (String)

        The tag's key.

      • valuerequired — (String)

        The tag's value.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipeline — (map)

        Represents the structure of actions and stages to be performed in the pipeline.

        • namerequired — (String)

          The name of the action to be performed.

        • roleArnrequired — (String)

          The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.

        • artifactStore — (map)

          Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.

          Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
          • typerequired — (String)

            The type of the artifact store, such as S3.

            Possible values include:
            • "S3"
          • locationrequired — (String)

            The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

          • encryptionKey — (map)

            The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • artifactStores — (map<map>)

          A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline.

          Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
          • typerequired — (String)

            The type of the artifact store, such as S3.

            Possible values include:
            • "S3"
          • locationrequired — (String)

            The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

          • encryptionKey — (map)

            The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • stagesrequired — (Array<map>)

          The stage in which to perform the action.

          • namerequired — (String)

            The name of the stage.

          • blockers — (Array<map>)

            Reserved for future use.

            • namerequired — (String)

              Reserved for future use.

            • typerequired — (String)

              Reserved for future use.

              Possible values include:
              • "Schedule"
          • actionsrequired — (Array<map>)

            The actions included in a stage.

            • namerequired — (String)

              The action declaration's name.

            • actionTypeIdrequired — (map)

              Specifies the action type and the provider of the action.

              • categoryrequired — (String)

                A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

                Possible values include:
                • "Source"
                • "Build"
                • "Deploy"
                • "Test"
                • "Invoke"
                • "Approval"
              • ownerrequired — (String)

                The creator of the action being called.

                Possible values include:
                • "AWS"
                • "ThirdParty"
                • "Custom"
              • providerrequired — (String)

                The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

              • versionrequired — (String)

                A string that describes the action version.

            • runOrder — (Integer)

              The order in which actions are run.

            • configuration — (map<String>)

              The action's configuration. These are key-value pairs that specify input values for an action. For more information, see Action Structure Requirements in CodePipeline. For the list of configuration properties for the AWS CloudFormation action type in CodePipeline, see Configuration Properties Reference in the AWS CloudFormation User Guide. For template snippets with examples, see Using Parameter Override Functions with CodePipeline Pipelines in the AWS CloudFormation User Guide.

              The values can be represented in either JSON or YAML format. For example, the JSON configuration item format is as follows:

              JSON:

              "Configuration" : { Key : Value },

            • outputArtifacts — (Array<map>)

              The name or ID of the result of the action declaration, such as a test or build artifact.

              • namerequired — (String)

                The name of the output of an artifact, such as "My App".

                The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

                Output artifact names must be unique within a pipeline.

            • inputArtifacts — (Array<map>)

              The name or ID of the artifact consumed by the action, such as a test or build artifact.

              • namerequired — (String)

                The name of the artifact to be worked on (for example, "My App").

                The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

            • roleArn — (String)

              The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline.

            • region — (String)

              The action declaration's AWS Region, such as us-east-1.

            • namespace — (String)

              The variable namespace associated with the action. All variables produced as output by this action fall under this namespace.

        • version — (Integer)

          The version number of the pipeline. A new pipeline always has a version number of 1. This number is incremented when a pipeline is updated.

      • tags — (Array<map>)

        Specifies the tags applied to the pipeline.

        • keyrequired — (String)

          The tag's key.

        • valuerequired — (String)

          The tag's value.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

deleteCustomActionType(params = {}, callback) ⇒ AWS.Request

Marks a custom action as deleted. PollForJobs for the custom action fails after the action is marked for deletion. Used for custom actions only.

To re-create a custom action after it has been deleted you must use a string in the version field that has never been used before. This string can be an incremented version number, for example. To restore a deleted custom action, use a JSON file that is identical to the deleted action, including the original string in the version field.

Service Reference:

Examples:

Calling the deleteCustomActionType operation

var params = {
  category: Source | Build | Deploy | Test | Invoke | Approval, /* required */
  provider: 'STRING_VALUE', /* required */
  version: 'STRING_VALUE' /* required */
};
codepipeline.deleteCustomActionType(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • category — (String)

      The category of the custom action that you want to delete, such as source or deploy.

      Possible values include:
      • "Source"
      • "Build"
      • "Deploy"
      • "Test"
      • "Invoke"
      • "Approval"
    • provider — (String)

      The provider of the service used in the custom action, such as AWS CodeDeploy.

    • version — (String)

      The version of the custom action to delete.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

deletePipeline(params = {}, callback) ⇒ AWS.Request

Deletes the specified pipeline.

Service Reference:

Examples:

Calling the deletePipeline operation

var params = {
  name: 'STRING_VALUE' /* required */
};
codepipeline.deletePipeline(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • name — (String)

      The name of the pipeline to be deleted.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

deleteWebhook(params = {}, callback) ⇒ AWS.Request

Deletes a previously created webhook by name. Deleting the webhook stops AWS CodePipeline from starting a pipeline every time an external event occurs. The API returns successfully when trying to delete a webhook that is already deleted. If a deleted webhook is re-created by calling PutWebhook with the same name, it will have a different URL.

Service Reference:

Examples:

Calling the deleteWebhook operation

var params = {
  name: 'STRING_VALUE' /* required */
};
codepipeline.deleteWebhook(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • name — (String)

      The name of the webhook you want to delete.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

deregisterWebhookWithThirdParty(params = {}, callback) ⇒ AWS.Request

Removes the connection between the webhook that was created by CodePipeline and the external tool with events to be detected. Currently supported only for webhooks that target an action type of GitHub.

Service Reference:

Examples:

Calling the deregisterWebhookWithThirdParty operation

var params = {
  webhookName: 'STRING_VALUE'
};
codepipeline.deregisterWebhookWithThirdParty(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • webhookName — (String)

      The name of the webhook you want to deregister.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

disableStageTransition(params = {}, callback) ⇒ AWS.Request

Prevents artifacts in a pipeline from transitioning to the next stage in the pipeline.

Service Reference:

Examples:

Calling the disableStageTransition operation

var params = {
  pipelineName: 'STRING_VALUE', /* required */
  reason: 'STRING_VALUE', /* required */
  stageName: 'STRING_VALUE', /* required */
  transitionType: Inbound | Outbound /* required */
};
codepipeline.disableStageTransition(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline in which you want to disable the flow of artifacts from one stage to another.

    • stageName — (String)

      The name of the stage where you want to disable the inbound or outbound transition of artifacts.

    • transitionType — (String)

      Specifies whether artifacts are prevented from transitioning into the stage and being processed by the actions in that stage (inbound), or prevented from transitioning from the stage after they have been processed by the actions in that stage (outbound).

      Possible values include:
      • "Inbound"
      • "Outbound"
    • reason — (String)

      The reason given to the user that a stage is disabled, such as waiting for manual approval or manual tests. This message is displayed in the pipeline console UI.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

enableStageTransition(params = {}, callback) ⇒ AWS.Request

Enables artifacts in a pipeline to transition to a stage in a pipeline.

Service Reference:

Examples:

Calling the enableStageTransition operation

var params = {
  pipelineName: 'STRING_VALUE', /* required */
  stageName: 'STRING_VALUE', /* required */
  transitionType: Inbound | Outbound /* required */
};
codepipeline.enableStageTransition(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline in which you want to enable the flow of artifacts from one stage to another.

    • stageName — (String)

      The name of the stage where you want to enable the transition of artifacts, either into the stage (inbound) or from that stage to the next stage (outbound).

    • transitionType — (String)

      Specifies whether artifacts are allowed to enter the stage and be processed by the actions in that stage (inbound) or whether already processed artifacts are allowed to transition to the next stage (outbound).

      Possible values include:
      • "Inbound"
      • "Outbound"

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

getJobDetails(params = {}, callback) ⇒ AWS.Request

Returns information about a job. Used for custom actions only.

When this API is called, AWS CodePipeline returns temporary credentials for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts. This API also returns any secret values defined for the action.

Service Reference:

Examples:

Calling the getJobDetails operation

var params = {
  jobId: 'STRING_VALUE' /* required */
};
codepipeline.getJobDetails(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The unique system-generated ID for the job.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • jobDetails — (map)

        The details of the job.

        Note: If AWSSessionCredentials is used, a long-running job can call GetJobDetails again to obtain new credentials.
        • id — (String)

          The unique system-generated ID of the job.

        • data — (map)

          Represents other information about a job required for a job worker to complete the job.

          • actionTypeId — (map)

            Represents information about an action type.

            • categoryrequired — (String)

              A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

              Possible values include:
              • "Source"
              • "Build"
              • "Deploy"
              • "Test"
              • "Invoke"
              • "Approval"
            • ownerrequired — (String)

              The creator of the action being called.

              Possible values include:
              • "AWS"
              • "ThirdParty"
              • "Custom"
            • providerrequired — (String)

              The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

            • versionrequired — (String)

              A string that describes the action version.

          • actionConfiguration — (map)

            Represents information about an action configuration.

            • configuration — (map<String>)

              The configuration data for the action.

          • pipelineContext — (map)

            Represents information about a pipeline to a job worker.

            Note: Includes pipelineArn and pipelineExecutionId for custom jobs.
            • pipelineName — (String)

              The name of the pipeline. This is a user-specified value. Pipeline names must be unique across all pipeline names under an Amazon Web Services account.

            • stage — (map)

              The stage of the pipeline.

              • name — (String)

                The name of the stage.

            • action — (map)

              The context of an action to a job worker in the stage of a pipeline.

              • name — (String)

                The name of the action in the context of a job.

              • actionExecutionId — (String)

                The system-generated unique ID that corresponds to an action's execution.

            • pipelineArn — (String)

              The Amazon Resource Name (ARN) of the pipeline.

            • pipelineExecutionId — (String)

              The execution ID of the pipeline.

          • inputArtifacts — (Array<map>)

            The artifact supplied to the job.

            • name — (String)

              The artifact's name.

            • revision — (String)

              The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

            • location — (map)

              The location of an artifact.

              • type — (String)

                The type of artifact in the location.

                Possible values include:
                • "S3"
              • s3Location — (map)

                The Amazon S3 bucket that contains the artifact.

                • bucketNamerequired — (String)

                  The name of the Amazon S3 bucket.

                • objectKeyrequired — (String)

                  The key of the object in the Amazon S3 bucket, which uniquely identifies the object in the bucket.

          • outputArtifacts — (Array<map>)

            The output of the job.

            • name — (String)

              The artifact's name.

            • revision — (String)

              The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

            • location — (map)

              The location of an artifact.

              • type — (String)

                The type of artifact in the location.

                Possible values include:
                • "S3"
              • s3Location — (map)

                The Amazon S3 bucket that contains the artifact.

                • bucketNamerequired — (String)

                  The name of the Amazon S3 bucket.

                • objectKeyrequired — (String)

                  The key of the object in the Amazon S3 bucket, which uniquely identifies the object in the bucket.

          • artifactCredentials — (map)

            Represents an AWS session credentials object. These credentials are temporary credentials that are issued by AWS Secure Token Service (STS). They can be used to access input and output artifacts in the Amazon S3 bucket used to store artifacts for the pipeline in AWS CodePipeline.

            • accessKeyIdrequired — (String)

              The access key for the session.

            • secretAccessKeyrequired — (String)

              The secret access key for the session.

            • sessionTokenrequired — (String)

              The token for the session.

          • continuationToken — (String)

            A system-generated token, such as a AWS CodeDeploy deployment ID, required by a job to continue the job asynchronously.

          • encryptionKey — (map)

            Represents information about the key used to encrypt data in the artifact store, such as an AWS Key Management Service (AWS KMS) key.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • accountId — (String)

          The AWS account ID associated with the job.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

getPipeline(params = {}, callback) ⇒ AWS.Request

Returns the metadata, structure, stages, and actions of a pipeline. Can be used to return the entire structure of a pipeline in JSON format, which can then be modified and used to update the pipeline structure with UpdatePipeline.

Service Reference:

Examples:

Calling the getPipeline operation

var params = {
  name: 'STRING_VALUE', /* required */
  version: 'NUMBER_VALUE'
};
codepipeline.getPipeline(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • name — (String)

      The name of the pipeline for which you want to get information. Pipeline names must be unique under an AWS user account.

    • version — (Integer)

      The version number of the pipeline. If you do not specify a version, defaults to the current version.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipeline — (map)

        Represents the structure of actions and stages to be performed in the pipeline.

        • namerequired — (String)

          The name of the action to be performed.

        • roleArnrequired — (String)

          The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.

        • artifactStore — (map)

          Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.

          Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
          • typerequired — (String)

            The type of the artifact store, such as S3.

            Possible values include:
            • "S3"
          • locationrequired — (String)

            The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

          • encryptionKey — (map)

            The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • artifactStores — (map<map>)

          A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline.

          Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
          • typerequired — (String)

            The type of the artifact store, such as S3.

            Possible values include:
            • "S3"
          • locationrequired — (String)

            The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

          • encryptionKey — (map)

            The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • stagesrequired — (Array<map>)

          The stage in which to perform the action.

          • namerequired — (String)

            The name of the stage.

          • blockers — (Array<map>)

            Reserved for future use.

            • namerequired — (String)

              Reserved for future use.

            • typerequired — (String)

              Reserved for future use.

              Possible values include:
              • "Schedule"
          • actionsrequired — (Array<map>)

            The actions included in a stage.

            • namerequired — (String)

              The action declaration's name.

            • actionTypeIdrequired — (map)

              Specifies the action type and the provider of the action.

              • categoryrequired — (String)

                A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

                Possible values include:
                • "Source"
                • "Build"
                • "Deploy"
                • "Test"
                • "Invoke"
                • "Approval"
              • ownerrequired — (String)

                The creator of the action being called.

                Possible values include:
                • "AWS"
                • "ThirdParty"
                • "Custom"
              • providerrequired — (String)

                The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

              • versionrequired — (String)

                A string that describes the action version.

            • runOrder — (Integer)

              The order in which actions are run.

            • configuration — (map<String>)

              The action's configuration. These are key-value pairs that specify input values for an action. For more information, see Action Structure Requirements in CodePipeline. For the list of configuration properties for the AWS CloudFormation action type in CodePipeline, see Configuration Properties Reference in the AWS CloudFormation User Guide. For template snippets with examples, see Using Parameter Override Functions with CodePipeline Pipelines in the AWS CloudFormation User Guide.

              The values can be represented in either JSON or YAML format. For example, the JSON configuration item format is as follows:

              JSON:

              "Configuration" : { Key : Value },

            • outputArtifacts — (Array<map>)

              The name or ID of the result of the action declaration, such as a test or build artifact.

              • namerequired — (String)

                The name of the output of an artifact, such as "My App".

                The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

                Output artifact names must be unique within a pipeline.

            • inputArtifacts — (Array<map>)

              The name or ID of the artifact consumed by the action, such as a test or build artifact.

              • namerequired — (String)

                The name of the artifact to be worked on (for example, "My App").

                The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

            • roleArn — (String)

              The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline.

            • region — (String)

              The action declaration's AWS Region, such as us-east-1.

            • namespace — (String)

              The variable namespace associated with the action. All variables produced as output by this action fall under this namespace.

        • version — (Integer)

          The version number of the pipeline. A new pipeline always has a version number of 1. This number is incremented when a pipeline is updated.

      • metadata — (map)

        Represents the pipeline metadata information returned as part of the output of a GetPipeline action.

        • pipelineArn — (String)

          The Amazon Resource Name (ARN) of the pipeline.

        • created — (Date)

          The date and time the pipeline was created, in timestamp format.

        • updated — (Date)

          The date and time the pipeline was last updated, in timestamp format.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

getPipelineExecution(params = {}, callback) ⇒ AWS.Request

Returns information about an execution of a pipeline, including details about artifacts, the pipeline execution ID, and the name, version, and status of the pipeline.

Service Reference:

Examples:

Calling the getPipelineExecution operation

var params = {
  pipelineExecutionId: 'STRING_VALUE', /* required */
  pipelineName: 'STRING_VALUE' /* required */
};
codepipeline.getPipelineExecution(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline about which you want to get execution details.

    • pipelineExecutionId — (String)

      The ID of the pipeline execution about which you want to get execution details.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipelineExecution — (map)

        Represents information about the execution of a pipeline.

        • pipelineName — (String)

          The name of the pipeline that was executed.

        • pipelineVersion — (Integer)

          The version number of the pipeline that was executed.

        • pipelineExecutionId — (String)

          The ID of the pipeline execution.

        • status — (String)

          The status of the pipeline execution.

          • InProgress: The pipeline execution is currently running.

          • Succeeded: The pipeline execution was completed successfully.

          • Superseded: While this pipeline execution was waiting for the next stage to be completed, a newer pipeline execution advanced and continued through the pipeline instead.

          • Failed: The pipeline execution was not completed successfully.

          Possible values include:
          • "InProgress"
          • "Succeeded"
          • "Superseded"
          • "Failed"
        • artifactRevisions — (Array<map>)

          A list of ArtifactRevision objects included in a pipeline execution.

          • name — (String)

            The name of an artifact. This name might be system-generated, such as "MyApp", or defined by the user when an action is created.

          • revisionId — (String)

            The revision ID of the artifact.

          • revisionChangeIdentifier — (String)

            An additional identifier for a revision, such as a commit date or, for artifacts stored in Amazon S3 buckets, the ETag value.

          • revisionSummary — (String)

            Summary information about the most recent revision of the artifact. For GitHub and AWS CodeCommit repositories, the commit message. For Amazon S3 buckets or actions, the user-provided content of a codepipeline-artifact-revision-summary key specified in the object metadata.

          • created — (Date)

            The date and time when the most recent revision of the artifact was created, in timestamp format.

          • revisionUrl — (String)

            The commit ID for the artifact revision. For artifacts stored in GitHub or AWS CodeCommit repositories, the commit ID is linked to a commit details page.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

getPipelineState(params = {}, callback) ⇒ AWS.Request

Returns information about the state of a pipeline, including the stages and actions.

Note: Values returned in the revisionId and revisionUrl fields indicate the source revision information, such as the commit ID, for the current state.

Service Reference:

Examples:

Calling the getPipelineState operation

var params = {
  name: 'STRING_VALUE' /* required */
};
codepipeline.getPipelineState(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • name — (String)

      The name of the pipeline about which you want to get information.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipelineName — (String)

        The name of the pipeline for which you want to get the state.

      • pipelineVersion — (Integer)

        The version number of the pipeline.

        Note: A newly created pipeline is always assigned a version number of 1.
      • stageStates — (Array<map>)

        A list of the pipeline stage output information, including stage name, state, most recent run details, whether the stage is disabled, and other data.

        • stageName — (String)

          The name of the stage.

        • inboundTransitionState — (map)

          The state of the inbound transition, which is either enabled or disabled.

          • enabled — (Boolean)

            Whether the transition between stages is enabled (true) or disabled (false).

          • lastChangedBy — (String)

            The ID of the user who last changed the transition state.

          • lastChangedAt — (Date)

            The timestamp when the transition state was last changed.

          • disabledReason — (String)

            The user-specified reason why the transition between two stages of a pipeline was disabled.

        • actionStates — (Array<map>)

          The state of the stage.

          • actionName — (String)

            The name of the action.

          • currentRevision — (map)

            Represents information about the version (or revision) of an action.

            • revisionIdrequired — (String)

              The system-generated unique ID that identifies the revision number of the action.

            • revisionChangeIdrequired — (String)

              The unique identifier of the change that set the state to this revision (for example, a deployment ID or timestamp).

            • createdrequired — (Date)

              The date and time when the most recent version of the action was created, in timestamp format.

          • latestExecution — (map)

            Represents information about the run of an action.

            • status — (String)

              The status of the action, or for a completed action, the last status of the action.

              Possible values include:
              • "InProgress"
              • "Succeeded"
              • "Failed"
            • summary — (String)

              A summary of the run of the action.

            • lastStatusChange — (Date)

              The last status change of the action.

            • token — (String)

              The system-generated token used to identify a unique approval request. The token for each open approval request can be obtained using the GetPipelineState command. It is used to validate that the approval request corresponding to this token is still valid.

            • lastUpdatedBy — (String)

              The ARN of the user who last changed the pipeline.

            • externalExecutionId — (String)

              The external ID of the run of the action.

            • externalExecutionUrl — (String)

              The URL of a resource external to AWS that is used when running the action (for example, an external repository URL).

            • percentComplete — (Integer)

              A percentage of completeness of the action as it runs.

            • errorDetails — (map)

              The details of an error returned by a URL external to AWS.

              • code — (String)

                The system ID or number code of the error.

              • message — (String)

                The text of the error message.

          • entityUrl — (String)

            A URL link for more information about the state of the action, such as a deployment group details page.

          • revisionUrl — (String)

            A URL link for more information about the revision, such as a commit details page.

        • latestExecution — (map)

          Information about the latest execution in the stage, including its ID and status.

          • pipelineExecutionIdrequired — (String)

            The ID of the pipeline execution associated with the stage.

          • statusrequired — (String)

            The status of the stage, or for a completed stage, the last status of the stage.

            Possible values include:
            • "InProgress"
            • "Failed"
            • "Succeeded"
      • created — (Date)

        The date and time the pipeline was created, in timestamp format.

      • updated — (Date)

        The date and time the pipeline was last updated, in timestamp format.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

getThirdPartyJobDetails(params = {}, callback) ⇒ AWS.Request

Requests the details of a job for a third party action. Used for partner actions only.

When this API is called, AWS CodePipeline returns temporary credentials for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts. This API also returns any secret values defined for the action.

Service Reference:

Examples:

Calling the getThirdPartyJobDetails operation

var params = {
  clientToken: 'STRING_VALUE', /* required */
  jobId: 'STRING_VALUE' /* required */
};
codepipeline.getThirdPartyJobDetails(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The unique system-generated ID used for identifying the job.

    • clientToken — (String)

      The clientToken portion of the clientId and clientToken pair used to verify that the calling entity is allowed access to the job and its details.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • jobDetails — (map)

        The details of the job, including any protected values defined for the job.

        • id — (String)

          The identifier used to identify the job details in AWS CodePipeline.

        • data — (map)

          The data to be returned by the third party job worker.

          • actionTypeId — (map)

            Represents information about an action type.

            • categoryrequired — (String)

              A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

              Possible values include:
              • "Source"
              • "Build"
              • "Deploy"
              • "Test"
              • "Invoke"
              • "Approval"
            • ownerrequired — (String)

              The creator of the action being called.

              Possible values include:
              • "AWS"
              • "ThirdParty"
              • "Custom"
            • providerrequired — (String)

              The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

            • versionrequired — (String)

              A string that describes the action version.

          • actionConfiguration — (map)

            Represents information about an action configuration.

            • configuration — (map<String>)

              The configuration data for the action.

          • pipelineContext — (map)

            Represents information about a pipeline to a job worker.

            Note: Does not include pipelineArn and pipelineExecutionId for ThirdParty jobs.
            • pipelineName — (String)

              The name of the pipeline. This is a user-specified value. Pipeline names must be unique across all pipeline names under an Amazon Web Services account.

            • stage — (map)

              The stage of the pipeline.

              • name — (String)

                The name of the stage.

            • action — (map)

              The context of an action to a job worker in the stage of a pipeline.

              • name — (String)

                The name of the action in the context of a job.

              • actionExecutionId — (String)

                The system-generated unique ID that corresponds to an action's execution.

            • pipelineArn — (String)

              The Amazon Resource Name (ARN) of the pipeline.

            • pipelineExecutionId — (String)

              The execution ID of the pipeline.

          • inputArtifacts — (Array<map>)

            The name of the artifact that is worked on by the action, if any. This name might be system-generated, such as "MyApp", or it might be defined by the user when the action is created. The input artifact name must match the name of an output artifact generated by an action in an earlier action or stage of the pipeline.

            • name — (String)

              The artifact's name.

            • revision — (String)

              The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

            • location — (map)

              The location of an artifact.

              • type — (String)

                The type of artifact in the location.

                Possible values include:
                • "S3"
              • s3Location — (map)

                The Amazon S3 bucket that contains the artifact.

                • bucketNamerequired — (String)

                  The name of the Amazon S3 bucket.

                • objectKeyrequired — (String)

                  The key of the object in the Amazon S3 bucket, which uniquely identifies the object in the bucket.

          • outputArtifacts — (Array<map>)

            The name of the artifact that is the result of the action, if any. This name might be system-generated, such as "MyBuiltApp", or it might be defined by the user when the action is created.

            • name — (String)

              The artifact's name.

            • revision — (String)

              The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

            • location — (map)

              The location of an artifact.

              • type — (String)

                The type of artifact in the location.

                Possible values include:
                • "S3"
              • s3Location — (map)

                The Amazon S3 bucket that contains the artifact.

                • bucketNamerequired — (String)

                  The name of the Amazon S3 bucket.

                • objectKeyrequired — (String)

                  The key of the object in the Amazon S3 bucket, which uniquely identifies the object in the bucket.

          • artifactCredentials — (map)

            Represents an AWS session credentials object. These credentials are temporary credentials that are issued by AWS Secure Token Service (STS). They can be used to access input and output artifacts in the Amazon S3 bucket used to store artifact for the pipeline in AWS CodePipeline.

            • accessKeyIdrequired — (String)

              The access key for the session.

            • secretAccessKeyrequired — (String)

              The secret access key for the session.

            • sessionTokenrequired — (String)

              The token for the session.

          • continuationToken — (String)

            A system-generated token, such as a AWS CodeDeploy deployment ID, that a job requires to continue the job asynchronously.

          • encryptionKey — (map)

            The encryption key used to encrypt and decrypt data in the artifact store for the pipeline, such as an AWS Key Management Service (AWS KMS) key. This is optional and might not be present.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • nonce — (String)

          A system-generated random number that AWS CodePipeline uses to ensure that the job is being worked on by only one job worker. Use this number in an AcknowledgeThirdPartyJob request.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

listActionExecutions(params = {}, callback) ⇒ AWS.Request

Lists the action executions that have occurred in a pipeline.

Service Reference:

Examples:

Calling the listActionExecutions operation

var params = {
  pipelineName: 'STRING_VALUE', /* required */
  filter: {
    pipelineExecutionId: 'STRING_VALUE'
  },
  maxResults: 'NUMBER_VALUE',
  nextToken: 'STRING_VALUE'
};
codepipeline.listActionExecutions(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline for which you want to list action execution history.

    • filter — (map)

      Input information used to filter action execution history.

      • pipelineExecutionId — (String)

        The pipeline execution ID used to filter action execution history.

    • maxResults — (Integer)

      The maximum number of results to return in a single call. To retrieve the remaining results, make another call with the returned nextToken value. Action execution history is retained for up to 12 months, based on action execution start times. Default value is 100.

      Note: Detailed execution history is available for executions run on or after February 21, 2019.
    • nextToken — (String)

      The token that was returned from the previous ListActionExecutions call, which can be used to return the next set of action executions in the list.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • actionExecutionDetails — (Array<map>)

        The details for a list of recent executions, such as action execution ID.

        • pipelineExecutionId — (String)

          The pipeline execution ID for the action execution.

        • actionExecutionId — (String)

          The action execution ID.

        • pipelineVersion — (Integer)

          The version of the pipeline where the action was run.

        • stageName — (String)

          The name of the stage that contains the action.

        • actionName — (String)

          The name of the action.

        • startTime — (Date)

          The start time of the action execution.

        • lastUpdateTime — (Date)

          The last update time of the action execution.

        • status — (String)

          The status of the action execution. Status categories are InProgress, Succeeded, and Failed.

          Possible values include:
          • "InProgress"
          • "Succeeded"
          • "Failed"
        • input — (map)

          Input details for the action execution, such as role ARN, Region, and input artifacts.

          • actionTypeId — (map)

            Represents information about an action type.

            • categoryrequired — (String)

              A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

              Possible values include:
              • "Source"
              • "Build"
              • "Deploy"
              • "Test"
              • "Invoke"
              • "Approval"
            • ownerrequired — (String)

              The creator of the action being called.

              Possible values include:
              • "AWS"
              • "ThirdParty"
              • "Custom"
            • providerrequired — (String)

              The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

            • versionrequired — (String)

              A string that describes the action version.

          • configuration — (map<String>)

            Configuration data for an action execution.

          • resolvedConfiguration — (map<String>)

            Configuration data for an action execution with all variable references replaced with their real values for the execution.

          • roleArn — (String)

            The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline.

          • region — (String)

            The AWS Region for the action, such as us-east-1.

          • inputArtifacts — (Array<map>)

            Details of input artifacts of the action that correspond to the action execution.

            • name — (String)

              The artifact object name for the action execution.

            • s3location — (map)

              The Amazon S3 artifact location for the action execution.

              • bucket — (String)

                The Amazon S3 artifact bucket for an action's artifacts.

              • key — (String)

                The artifact name.

          • namespace — (String)

            The variable namespace associated with the action. All variables produced as output by this action fall under this namespace.

        • output — (map)

          Output details for the action execution, such as the action execution result.

          • outputArtifacts — (Array<map>)

            Details of output artifacts of the action that correspond to the action execution.

            • name — (String)

              The artifact object name for the action execution.

            • s3location — (map)

              The Amazon S3 artifact location for the action execution.

              • bucket — (String)

                The Amazon S3 artifact bucket for an action's artifacts.

              • key — (String)

                The artifact name.

          • executionResult — (map)

            Execution result information listed in the output details for an action execution.

            • externalExecutionId — (String)

              The action provider's external ID for the action execution.

            • externalExecutionSummary — (String)

              The action provider's summary for the action execution.

            • externalExecutionUrl — (String)

              The deepest external link to the external resource (for example, a repository URL or deployment endpoint) that is used when running the action.

          • outputVariables — (map<String>)

            The outputVariables field shows the key-value pairs that were output as part of that execution.

      • nextToken — (String)

        If the amount of returned information is significantly large, an identifier is also returned and can be used in a subsequent ListActionExecutions call to return the next set of action executions in the list.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

listActionTypes(params = {}, callback) ⇒ AWS.Request

Gets a summary of all AWS CodePipeline action types associated with your account.

Service Reference:

Examples:

Calling the listActionTypes operation

var params = {
  actionOwnerFilter: AWS | ThirdParty | Custom,
  nextToken: 'STRING_VALUE'
};
codepipeline.listActionTypes(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • actionOwnerFilter — (String)

      Filters the list of action types to those created by a specified entity.

      Possible values include:
      • "AWS"
      • "ThirdParty"
      • "Custom"
    • nextToken — (String)

      An identifier that was returned from the previous list action types call, which can be used to return the next set of action types in the list.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • actionTypes — (Array<map>)

        Provides details of the action types.

        • idrequired — (map)

          Represents information about an action type.

          • categoryrequired — (String)

            A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

            Possible values include:
            • "Source"
            • "Build"
            • "Deploy"
            • "Test"
            • "Invoke"
            • "Approval"
          • ownerrequired — (String)

            The creator of the action being called.

            Possible values include:
            • "AWS"
            • "ThirdParty"
            • "Custom"
          • providerrequired — (String)

            The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

          • versionrequired — (String)

            A string that describes the action version.

        • settings — (map)

          The settings for the action type.

          • thirdPartyConfigurationUrl — (String)

            The URL of a sign-up page where users can sign up for an external service and perform initial configuration of the action provided by that service.

          • entityUrlTemplate — (String)

            The URL returned to the AWS CodePipeline console that provides a deep link to the resources of the external system, such as the configuration page for an AWS CodeDeploy deployment group. This link is provided as part of the action display in the pipeline.

          • executionUrlTemplate — (String)

            The URL returned to the AWS CodePipeline console that contains a link to the top-level landing page for the external system, such as the console page for AWS CodeDeploy. This link is shown on the pipeline view page in the AWS CodePipeline console and provides a link to the execution entity of the external action.

          • revisionUrlTemplate — (String)

            The URL returned to the AWS CodePipeline console that contains a link to the page where customers can update or change the configuration of the external action.

        • actionConfigurationProperties — (Array<map>)

          The configuration properties for the action type.

          • namerequired — (String)

            The name of the action configuration property.

          • requiredrequired — (Boolean)

            Whether the configuration property is a required value.

          • keyrequired — (Boolean)

            Whether the configuration property is a key.

          • secretrequired — (Boolean)

            Whether the configuration property is secret. Secrets are hidden from all calls except for GetJobDetails, GetThirdPartyJobDetails, PollForJobs, and PollForThirdPartyJobs.

            When updating a pipeline, passing * * * * * without changing any other values of the action preserves the previous value of the secret.

          • queryable — (Boolean)

            Indicates that the property is used with PollForJobs. When creating a custom action, an action can have up to one queryable property. If it has one, that property must be both required and not secret.

            If you create a pipeline with a custom action type, and that custom action contains a queryable property, the value for that configuration property is subject to other restrictions. The value must be less than or equal to twenty (20) characters. The value can contain only alphanumeric characters, underscores, and hyphens.

          • description — (String)

            The description of the action configuration property that is displayed to users.

          • type — (String)

            The type of the configuration property.

            Possible values include:
            • "String"
            • "Number"
            • "Boolean"
        • inputArtifactDetailsrequired — (map)

          The details of the input artifact for the action, such as its commit ID.

          • minimumCountrequired — (Integer)

            The minimum number of artifacts allowed for the action type.

          • maximumCountrequired — (Integer)

            The maximum number of artifacts allowed for the action type.

        • outputArtifactDetailsrequired — (map)

          The details of the output artifact of the action, such as its commit ID.

          • minimumCountrequired — (Integer)

            The minimum number of artifacts allowed for the action type.

          • maximumCountrequired — (Integer)

            The maximum number of artifacts allowed for the action type.

      • nextToken — (String)

        If the amount of returned information is significantly large, an identifier is also returned. It can be used in a subsequent list action types call to return the next set of action types in the list.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

listPipelineExecutions(params = {}, callback) ⇒ AWS.Request

Gets a summary of the most recent executions for a pipeline.

Service Reference:

Examples:

Calling the listPipelineExecutions operation

var params = {
  pipelineName: 'STRING_VALUE', /* required */
  maxResults: 'NUMBER_VALUE',
  nextToken: 'STRING_VALUE'
};
codepipeline.listPipelineExecutions(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline for which you want to get execution summary information.

    • maxResults — (Integer)

      The maximum number of results to return in a single call. To retrieve the remaining results, make another call with the returned nextToken value. Pipeline history is limited to the most recent 12 months, based on pipeline execution start times. Default value is 100.

    • nextToken — (String)

      The token that was returned from the previous ListPipelineExecutions call, which can be used to return the next set of pipeline executions in the list.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipelineExecutionSummaries — (Array<map>)

        A list of executions in the history of a pipeline.

        • pipelineExecutionId — (String)

          The ID of the pipeline execution.

        • status — (String)

          The status of the pipeline execution.

          • InProgress: The pipeline execution is currently running.

          • Succeeded: The pipeline execution was completed successfully.

          • Superseded: While this pipeline execution was waiting for the next stage to be completed, a newer pipeline execution advanced and continued through the pipeline instead.

          • Failed: The pipeline execution was not completed successfully.

          Possible values include:
          • "InProgress"
          • "Succeeded"
          • "Superseded"
          • "Failed"
        • startTime — (Date)

          The date and time when the pipeline execution began, in timestamp format.

        • lastUpdateTime — (Date)

          The date and time of the last change to the pipeline execution, in timestamp format.

        • sourceRevisions — (Array<map>)

          A list of the source artifact revisions that initiated a pipeline execution.

          • actionNamerequired — (String)

            The name of the action that processed the revision to the source artifact.

          • revisionId — (String)

            The system-generated unique ID that identifies the revision number of the artifact.

          • revisionSummary — (String)

            Summary information about the most recent revision of the artifact. For GitHub and AWS CodeCommit repositories, the commit message. For Amazon S3 buckets or actions, the user-provided content of a codepipeline-artifact-revision-summary key specified in the object metadata.

          • revisionUrl — (String)

            The commit ID for the artifact revision. For artifacts stored in GitHub or AWS CodeCommit repositories, the commit ID is linked to a commit details page.

        • trigger — (map)

          The interaction or event that started a pipeline execution, such as automated change detection or a StartPipelineExecution API call.

          • triggerType — (String)

            The type of change-detection method, command, or user interaction that started a pipeline execution.

            Possible values include:
            • "CreatePipeline"
            • "StartPipelineExecution"
            • "PollForSourceChanges"
            • "Webhook"
            • "CloudWatchEvent"
            • "PutActionRevision"
          • triggerDetail — (String)

            Detail related to the event that started a pipeline execution, such as the webhook ARN of the webhook that triggered the pipeline execution or the user ARN for a user-initiated start-pipeline-execution CLI command.

      • nextToken — (String)

        A token that can be used in the next ListPipelineExecutions call. To view all items in the list, continue to call this operation with each subsequent token until no more nextToken values are returned.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

listPipelines(params = {}, callback) ⇒ AWS.Request

Gets a summary of all of the pipelines associated with your account.

Service Reference:

Examples:

Calling the listPipelines operation

var params = {
  nextToken: 'STRING_VALUE'
};
codepipeline.listPipelines(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • nextToken — (String)

      An identifier that was returned from the previous list pipelines call. It can be used to return the next set of pipelines in the list.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipelines — (Array<map>)

        The list of pipelines.

        • name — (String)

          The name of the pipeline.

        • version — (Integer)

          The version number of the pipeline.

        • created — (Date)

          The date and time the pipeline was created, in timestamp format.

        • updated — (Date)

          The date and time of the last update to the pipeline, in timestamp format.

      • nextToken — (String)

        If the amount of returned information is significantly large, an identifier is also returned. It can be used in a subsequent list pipelines call to return the next set of pipelines in the list.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

listTagsForResource(params = {}, callback) ⇒ AWS.Request

Gets the set of key-value pairs (metadata) that are used to manage the resource.

Service Reference:

Examples:

Calling the listTagsForResource operation

var params = {
  resourceArn: 'STRING_VALUE', /* required */
  maxResults: 'NUMBER_VALUE',
  nextToken: 'STRING_VALUE'
};
codepipeline.listTagsForResource(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • resourceArn — (String)

      The Amazon Resource Name (ARN) of the resource to get tags for.

    • nextToken — (String)

      The token that was returned from the previous API call, which would be used to return the next page of the list. The ListTagsforResource call lists all available tags in one call and does not use pagination.

    • maxResults — (Integer)

      The maximum number of results to return in a single call.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • tags — (Array<map>)

        The tags for the resource.

        • keyrequired — (String)

          The tag's key.

        • valuerequired — (String)

          The tag's value.

      • nextToken — (String)

        If the amount of returned information is significantly large, an identifier is also returned and can be used in a subsequent API call to return the next page of the list. The ListTagsforResource call lists all available tags in one call and does not use pagination.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

listWebhooks(params = {}, callback) ⇒ AWS.Request

Gets a listing of all the webhooks in this AWS Region for this account. The output lists all webhooks and includes the webhook URL and ARN and the configuration for each webhook.

Service Reference:

Examples:

Calling the listWebhooks operation

var params = {
  MaxResults: 'NUMBER_VALUE',
  NextToken: 'STRING_VALUE'
};
codepipeline.listWebhooks(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • NextToken — (String)

      The token that was returned from the previous ListWebhooks call, which can be used to return the next set of webhooks in the list.

    • MaxResults — (Integer)

      The maximum number of results to return in a single call. To retrieve the remaining results, make another call with the returned nextToken value.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • webhooks — (Array<map>)

        The JSON detail returned for each webhook in the list output for the ListWebhooks call.

        • definitionrequired — (map)

          The detail returned for each webhook, such as the webhook authentication type and filter rules.

          • namerequired — (String)

            The name of the webhook.

          • targetPipelinerequired — (String)

            The name of the pipeline you want to connect to the webhook.

          • targetActionrequired — (String)

            The name of the action in a pipeline you want to connect to the webhook. The action must be from the source (first) stage of the pipeline.

          • filtersrequired — (Array<map>)

            A list of rules applied to the body/payload sent in the POST request to a webhook URL. All defined rules must pass for the request to be accepted and the pipeline started.

            • jsonPathrequired — (String)

              A JsonPath expression that is applied to the body/payload of the webhook. The value selected by the JsonPath expression must match the value specified in the MatchEquals field. Otherwise, the request is ignored. For more information, see Java JsonPath implementation in GitHub.

            • matchEquals — (String)

              The value selected by the JsonPath expression must match what is supplied in the MatchEquals field. Otherwise, the request is ignored. Properties from the target action configuration can be included as placeholders in this value by surrounding the action configuration key with curly brackets. For example, if the value supplied here is "refs/heads/{Branch}" and the target action has an action configuration property called "Branch" with a value of "master", the MatchEquals value is evaluated as "refs/heads/master". For a list of action configuration properties for built-in action types, see Pipeline Structure Reference Action Requirements.

          • authenticationrequired — (String)

            Supported options are GITHUB_HMAC, IP, and UNAUTHENTICATED.

            • For information about the authentication scheme implemented by GITHUB_HMAC, see Securing your webhooks on the GitHub Developer website.

            • IP rejects webhooks trigger requests unless they originate from an IP address in the IP range whitelisted in the authentication configuration.

            • UNAUTHENTICATED accepts all webhook trigger requests regardless of origin.

            Possible values include:
            • "GITHUB_HMAC"
            • "IP"
            • "UNAUTHENTICATED"
          • authenticationConfigurationrequired — (map)

            Properties that configure the authentication applied to incoming webhook trigger requests. The required properties depend on the authentication type. For GITHUB_HMAC, only the SecretToken property must be set. For IP, only the AllowedIPRange property must be set to a valid CIDR range. For UNAUTHENTICATED, no properties can be set.

            • AllowedIPRange — (String)

              The property used to configure acceptance of webhooks in an IP address range. For IP, only the AllowedIPRange property must be set. This property must be set to a valid CIDR range.

            • SecretToken — (String)

              The property used to configure GitHub authentication. For GITHUB_HMAC, only the SecretToken property must be set.

        • urlrequired — (String)

          A unique URL generated by CodePipeline. When a POST request is made to this URL, the defined pipeline is started as long as the body of the post request satisfies the defined authentication and filtering conditions. Deleting and re-creating a webhook makes the old URL invalid and generates a new one.

        • errorMessage — (String)

          The text of the error message about the webhook.

        • errorCode — (String)

          The number code of the error.

        • lastTriggered — (Date)

          The date and time a webhook was last successfully triggered, in timestamp format.

        • arn — (String)

          The Amazon Resource Name (ARN) of the webhook.

        • tags — (Array<map>)

          Specifies the tags applied to the webhook.

          • keyrequired — (String)

            The tag's key.

          • valuerequired — (String)

            The tag's value.

      • NextToken — (String)

        If the amount of returned information is significantly large, an identifier is also returned and can be used in a subsequent ListWebhooks call to return the next set of webhooks in the list.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

pollForJobs(params = {}, callback) ⇒ AWS.Request

Returns information about any jobs for AWS CodePipeline to act on. PollForJobs is valid only for action types with "Custom" in the owner field. If the action type contains "AWS" or "ThirdParty" in the owner field, the PollForJobs action returns an error.

When this API is called, AWS CodePipeline returns temporary credentials for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts. This API also returns any secret values defined for the action.

Service Reference:

Examples:

Calling the pollForJobs operation

var params = {
  actionTypeId: { /* required */
    category: Source | Build | Deploy | Test | Invoke | Approval, /* required */
    owner: AWS | ThirdParty | Custom, /* required */
    provider: 'STRING_VALUE', /* required */
    version: 'STRING_VALUE' /* required */
  },
  maxBatchSize: 'NUMBER_VALUE',
  queryParam: {
    '<ActionConfigurationKey>': 'STRING_VALUE',
    /* '<ActionConfigurationKey>': ... */
  }
};
codepipeline.pollForJobs(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • actionTypeId — (map)

      Represents information about an action type.

      • categoryrequired — (String)

        A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

        Possible values include:
        • "Source"
        • "Build"
        • "Deploy"
        • "Test"
        • "Invoke"
        • "Approval"
      • ownerrequired — (String)

        The creator of the action being called.

        Possible values include:
        • "AWS"
        • "ThirdParty"
        • "Custom"
      • providerrequired — (String)

        The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

      • versionrequired — (String)

        A string that describes the action version.

    • maxBatchSize — (Integer)

      The maximum number of jobs to return in a poll for jobs call.

    • queryParam — (map<String>)

      A map of property names and values. For an action type with no queryable properties, this value must be null or an empty map. For an action type with a queryable property, you must supply that property as a key in the map. Only jobs whose action configuration matches the mapped value are returned.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • jobs — (Array<map>)

        Information about the jobs to take action on.

        • id — (String)

          The unique system-generated ID of the job.

        • data — (map)

          Other data about a job.

          • actionTypeId — (map)

            Represents information about an action type.

            • categoryrequired — (String)

              A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

              Possible values include:
              • "Source"
              • "Build"
              • "Deploy"
              • "Test"
              • "Invoke"
              • "Approval"
            • ownerrequired — (String)

              The creator of the action being called.

              Possible values include:
              • "AWS"
              • "ThirdParty"
              • "Custom"
            • providerrequired — (String)

              The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

            • versionrequired — (String)

              A string that describes the action version.

          • actionConfiguration — (map)

            Represents information about an action configuration.

            • configuration — (map<String>)

              The configuration data for the action.

          • pipelineContext — (map)

            Represents information about a pipeline to a job worker.

            Note: Includes pipelineArn and pipelineExecutionId for custom jobs.
            • pipelineName — (String)

              The name of the pipeline. This is a user-specified value. Pipeline names must be unique across all pipeline names under an Amazon Web Services account.

            • stage — (map)

              The stage of the pipeline.

              • name — (String)

                The name of the stage.

            • action — (map)

              The context of an action to a job worker in the stage of a pipeline.

              • name — (String)

                The name of the action in the context of a job.

              • actionExecutionId — (String)

                The system-generated unique ID that corresponds to an action's execution.

            • pipelineArn — (String)

              The Amazon Resource Name (ARN) of the pipeline.

            • pipelineExecutionId — (String)

              The execution ID of the pipeline.

          • inputArtifacts — (Array<map>)

            The artifact supplied to the job.

            • name — (String)

              The artifact's name.

            • revision — (String)

              The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

            • location — (map)

              The location of an artifact.

              • type — (String)

                The type of artifact in the location.

                Possible values include:
                • "S3"
              • s3Location — (map)

                The Amazon S3 bucket that contains the artifact.

                • bucketNamerequired — (String)

                  The name of the Amazon S3 bucket.

                • objectKeyrequired — (String)

                  The key of the object in the Amazon S3 bucket, which uniquely identifies the object in the bucket.

          • outputArtifacts — (Array<map>)

            The output of the job.

            • name — (String)

              The artifact's name.

            • revision — (String)

              The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

            • location — (map)

              The location of an artifact.

              • type — (String)

                The type of artifact in the location.

                Possible values include:
                • "S3"
              • s3Location — (map)

                The Amazon S3 bucket that contains the artifact.

                • bucketNamerequired — (String)

                  The name of the Amazon S3 bucket.

                • objectKeyrequired — (String)

                  The key of the object in the Amazon S3 bucket, which uniquely identifies the object in the bucket.

          • artifactCredentials — (map)

            Represents an AWS session credentials object. These credentials are temporary credentials that are issued by AWS Secure Token Service (STS). They can be used to access input and output artifacts in the Amazon S3 bucket used to store artifacts for the pipeline in AWS CodePipeline.

            • accessKeyIdrequired — (String)

              The access key for the session.

            • secretAccessKeyrequired — (String)

              The secret access key for the session.

            • sessionTokenrequired — (String)

              The token for the session.

          • continuationToken — (String)

            A system-generated token, such as a AWS CodeDeploy deployment ID, required by a job to continue the job asynchronously.

          • encryptionKey — (map)

            Represents information about the key used to encrypt data in the artifact store, such as an AWS Key Management Service (AWS KMS) key.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • nonce — (String)

          A system-generated random number that AWS CodePipeline uses to ensure that the job is being worked on by only one job worker. Use this number in an AcknowledgeJob request.

        • accountId — (String)

          The ID of the AWS account to use when performing the job.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

pollForThirdPartyJobs(params = {}, callback) ⇒ AWS.Request

Determines whether there are any third party jobs for a job worker to act on. Used for partner actions only.

When this API is called, AWS CodePipeline returns temporary credentials for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts.

Service Reference:

Examples:

Calling the pollForThirdPartyJobs operation

var params = {
  actionTypeId: { /* required */
    category: Source | Build | Deploy | Test | Invoke | Approval, /* required */
    owner: AWS | ThirdParty | Custom, /* required */
    provider: 'STRING_VALUE', /* required */
    version: 'STRING_VALUE' /* required */
  },
  maxBatchSize: 'NUMBER_VALUE'
};
codepipeline.pollForThirdPartyJobs(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • actionTypeId — (map)

      Represents information about an action type.

      • categoryrequired — (String)

        A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

        Possible values include:
        • "Source"
        • "Build"
        • "Deploy"
        • "Test"
        • "Invoke"
        • "Approval"
      • ownerrequired — (String)

        The creator of the action being called.

        Possible values include:
        • "AWS"
        • "ThirdParty"
        • "Custom"
      • providerrequired — (String)

        The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

      • versionrequired — (String)

        A string that describes the action version.

    • maxBatchSize — (Integer)

      The maximum number of jobs to return in a poll for jobs call.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • jobs — (Array<map>)

        Information about the jobs to take action on.

        • clientId — (String)

          The clientToken portion of the clientId and clientToken pair used to verify that the calling entity is allowed access to the job and its details.

        • jobId — (String)

          The identifier used to identify the job in AWS CodePipeline.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putActionRevision(params = {}, callback) ⇒ AWS.Request

Provides information to AWS CodePipeline about new revisions to a source.

Service Reference:

Examples:

Calling the putActionRevision operation

var params = {
  actionName: 'STRING_VALUE', /* required */
  actionRevision: { /* required */
    created: new Date || 'Wed Dec 31 1969 16:00:00 GMT-0800 (PST)' || 123456789, /* required */
    revisionChangeId: 'STRING_VALUE', /* required */
    revisionId: 'STRING_VALUE' /* required */
  },
  pipelineName: 'STRING_VALUE', /* required */
  stageName: 'STRING_VALUE' /* required */
};
codepipeline.putActionRevision(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline that starts processing the revision to the source.

    • stageName — (String)

      The name of the stage that contains the action that acts on the revision.

    • actionName — (String)

      The name of the action that processes the revision.

    • actionRevision — (map)

      Represents information about the version (or revision) of an action.

      • revisionIdrequired — (String)

        The system-generated unique ID that identifies the revision number of the action.

      • revisionChangeIdrequired — (String)

        The unique identifier of the change that set the state to this revision (for example, a deployment ID or timestamp).

      • createdrequired — (Date)

        The date and time when the most recent version of the action was created, in timestamp format.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • newRevision — (Boolean)

        Indicates whether the artifact revision was previously used in an execution of the specified pipeline.

      • pipelineExecutionId — (String)

        The ID of the current workflow state of the pipeline.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putApprovalResult(params = {}, callback) ⇒ AWS.Request

Provides the response to a manual approval request to AWS CodePipeline. Valid responses include Approved and Rejected.

Service Reference:

Examples:

Calling the putApprovalResult operation

var params = {
  actionName: 'STRING_VALUE', /* required */
  pipelineName: 'STRING_VALUE', /* required */
  result: { /* required */
    status: Approved | Rejected, /* required */
    summary: 'STRING_VALUE' /* required */
  },
  stageName: 'STRING_VALUE', /* required */
  token: 'STRING_VALUE' /* required */
};
codepipeline.putApprovalResult(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline that contains the action.

    • stageName — (String)

      The name of the stage that contains the action.

    • actionName — (String)

      The name of the action for which approval is requested.

    • result — (map)

      Represents information about the result of the approval request.

      • summaryrequired — (String)

        The summary of the current status of the approval request.

      • statusrequired — (String)

        The response submitted by a reviewer assigned to an approval action request.

        Possible values include:
        • "Approved"
        • "Rejected"
    • token — (String)

      The system-generated token used to identify a unique approval request. The token for each open approval request can be obtained using the GetPipelineState action. It is used to validate that the approval request corresponding to this token is still valid.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • approvedAt — (Date)

        The timestamp showing when the approval or rejection was submitted.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putJobFailureResult(params = {}, callback) ⇒ AWS.Request

Represents the failure of a job as returned to the pipeline by a job worker. Used for custom actions only.

Service Reference:

Examples:

Calling the putJobFailureResult operation

var params = {
  failureDetails: { /* required */
    message: 'STRING_VALUE', /* required */
    type: JobFailed | ConfigurationError | PermissionError | RevisionOutOfSync | RevisionUnavailable | SystemUnavailable, /* required */
    externalExecutionId: 'STRING_VALUE'
  },
  jobId: 'STRING_VALUE' /* required */
};
codepipeline.putJobFailureResult(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The unique system-generated ID of the job that failed. This is the same ID returned from PollForJobs.

    • failureDetails — (map)

      The details about the failure of a job.

      • typerequired — (String)

        The type of the failure.

        Possible values include:
        • "JobFailed"
        • "ConfigurationError"
        • "PermissionError"
        • "RevisionOutOfSync"
        • "RevisionUnavailable"
        • "SystemUnavailable"
      • messagerequired — (String)

        The message about the failure.

      • externalExecutionId — (String)

        The external ID of the run of the action that failed.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putJobSuccessResult(params = {}, callback) ⇒ AWS.Request

Represents the success of a job as returned to the pipeline by a job worker. Used for custom actions only.

Service Reference:

Examples:

Calling the putJobSuccessResult operation

var params = {
  jobId: 'STRING_VALUE', /* required */
  continuationToken: 'STRING_VALUE',
  currentRevision: {
    changeIdentifier: 'STRING_VALUE', /* required */
    revision: 'STRING_VALUE', /* required */
    created: new Date || 'Wed Dec 31 1969 16:00:00 GMT-0800 (PST)' || 123456789,
    revisionSummary: 'STRING_VALUE'
  },
  executionDetails: {
    externalExecutionId: 'STRING_VALUE',
    percentComplete: 'NUMBER_VALUE',
    summary: 'STRING_VALUE'
  },
  outputVariables: {
    '<OutputVariablesKey>': 'STRING_VALUE',
    /* '<OutputVariablesKey>': ... */
  }
};
codepipeline.putJobSuccessResult(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The unique system-generated ID of the job that succeeded. This is the same ID returned from PollForJobs.

    • currentRevision — (map)

      The ID of the current revision of the artifact successfully worked on by the job.

      • revisionrequired — (String)

        The revision ID of the current version of an artifact.

      • changeIdentifierrequired — (String)

        The change identifier for the current revision.

      • created — (Date)

        The date and time when the most recent revision of the artifact was created, in timestamp format.

      • revisionSummary — (String)

        The summary of the most recent revision of the artifact.

    • continuationToken — (String)

      A token generated by a job worker, such as an AWS CodeDeploy deployment ID, that a successful job provides to identify a custom action in progress. Future jobs use this token to identify the running instance of the action. It can be reused to return more information about the progress of the custom action. When the action is complete, no continuation token should be supplied.

    • executionDetails — (map)

      The execution details of the successful job, such as the actions taken by the job worker.

      • summary — (String)

        The summary of the current status of the actions.

      • externalExecutionId — (String)

        The system-generated unique ID of this action used to identify this job worker in any external systems, such as AWS CodeDeploy.

      • percentComplete — (Integer)

        The percentage of work completed on the action, represented on a scale of 0 to 100 percent.

    • outputVariables — (map<String>)

      Key-value pairs produced as output by a job worker that can be made available to a downstream action configuration. outputVariables can be included only when there is no continuation token on the request.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putThirdPartyJobFailureResult(params = {}, callback) ⇒ AWS.Request

Represents the failure of a third party job as returned to the pipeline by a job worker. Used for partner actions only.

Service Reference:

Examples:

Calling the putThirdPartyJobFailureResult operation

var params = {
  clientToken: 'STRING_VALUE', /* required */
  failureDetails: { /* required */
    message: 'STRING_VALUE', /* required */
    type: JobFailed | ConfigurationError | PermissionError | RevisionOutOfSync | RevisionUnavailable | SystemUnavailable, /* required */
    externalExecutionId: 'STRING_VALUE'
  },
  jobId: 'STRING_VALUE' /* required */
};
codepipeline.putThirdPartyJobFailureResult(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The ID of the job that failed. This is the same ID returned from PollForThirdPartyJobs.

    • clientToken — (String)

      The clientToken portion of the clientId and clientToken pair used to verify that the calling entity is allowed access to the job and its details.

    • failureDetails — (map)

      Represents information about failure details.

      • typerequired — (String)

        The type of the failure.

        Possible values include:
        • "JobFailed"
        • "ConfigurationError"
        • "PermissionError"
        • "RevisionOutOfSync"
        • "RevisionUnavailable"
        • "SystemUnavailable"
      • messagerequired — (String)

        The message about the failure.

      • externalExecutionId — (String)

        The external ID of the run of the action that failed.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putThirdPartyJobSuccessResult(params = {}, callback) ⇒ AWS.Request

Represents the success of a third party job as returned to the pipeline by a job worker. Used for partner actions only.

Service Reference:

Examples:

Calling the putThirdPartyJobSuccessResult operation

var params = {
  clientToken: 'STRING_VALUE', /* required */
  jobId: 'STRING_VALUE', /* required */
  continuationToken: 'STRING_VALUE',
  currentRevision: {
    changeIdentifier: 'STRING_VALUE', /* required */
    revision: 'STRING_VALUE', /* required */
    created: new Date || 'Wed Dec 31 1969 16:00:00 GMT-0800 (PST)' || 123456789,
    revisionSummary: 'STRING_VALUE'
  },
  executionDetails: {
    externalExecutionId: 'STRING_VALUE',
    percentComplete: 'NUMBER_VALUE',
    summary: 'STRING_VALUE'
  }
};
codepipeline.putThirdPartyJobSuccessResult(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • jobId — (String)

      The ID of the job that successfully completed. This is the same ID returned from PollForThirdPartyJobs.

    • clientToken — (String)

      The clientToken portion of the clientId and clientToken pair used to verify that the calling entity is allowed access to the job and its details.

    • currentRevision — (map)

      Represents information about a current revision.

      • revisionrequired — (String)

        The revision ID of the current version of an artifact.

      • changeIdentifierrequired — (String)

        The change identifier for the current revision.

      • created — (Date)

        The date and time when the most recent revision of the artifact was created, in timestamp format.

      • revisionSummary — (String)

        The summary of the most recent revision of the artifact.

    • continuationToken — (String)

      A token generated by a job worker, such as an AWS CodeDeploy deployment ID, that a successful job provides to identify a partner action in progress. Future jobs use this token to identify the running instance of the action. It can be reused to return more information about the progress of the partner action. When the action is complete, no continuation token should be supplied.

    • executionDetails — (map)

      The details of the actions taken and results produced on an artifact as it passes through stages in the pipeline.

      • summary — (String)

        The summary of the current status of the actions.

      • externalExecutionId — (String)

        The system-generated unique ID of this action used to identify this job worker in any external systems, such as AWS CodeDeploy.

      • percentComplete — (Integer)

        The percentage of work completed on the action, represented on a scale of 0 to 100 percent.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

putWebhook(params = {}, callback) ⇒ AWS.Request

Defines a webhook and returns a unique webhook URL generated by CodePipeline. This URL can be supplied to third party source hosting providers to call every time there's a code change. When CodePipeline receives a POST request on this URL, the pipeline defined in the webhook is started as long as the POST request satisfied the authentication and filtering requirements supplied when defining the webhook. RegisterWebhookWithThirdParty and DeregisterWebhookWithThirdParty APIs can be used to automatically configure supported third parties to call the generated webhook URL.

Service Reference:

Examples:

Calling the putWebhook operation

var params = {
  webhook: { /* required */
    authentication: GITHUB_HMAC | IP | UNAUTHENTICATED, /* required */
    authenticationConfiguration: { /* required */
      AllowedIPRange: 'STRING_VALUE',
      SecretToken: 'STRING_VALUE'
    },
    filters: [ /* required */
      {
        jsonPath: 'STRING_VALUE', /* required */
        matchEquals: 'STRING_VALUE'
      },
      /* more items */
    ],
    name: 'STRING_VALUE', /* required */
    targetAction: 'STRING_VALUE', /* required */
    targetPipeline: 'STRING_VALUE' /* required */
  },
  tags: [
    {
      key: 'STRING_VALUE', /* required */
      value: 'STRING_VALUE' /* required */
    },
    /* more items */
  ]
};
codepipeline.putWebhook(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • webhook — (map)

      The detail provided in an input file to create the webhook, such as the webhook name, the pipeline name, and the action name. Give the webhook a unique name that helps you identify it. You might name the webhook after the pipeline and action it targets so that you can easily recognize what it's used for later.

      • namerequired — (String)

        The name of the webhook.

      • targetPipelinerequired — (String)

        The name of the pipeline you want to connect to the webhook.

      • targetActionrequired — (String)

        The name of the action in a pipeline you want to connect to the webhook. The action must be from the source (first) stage of the pipeline.

      • filtersrequired — (Array<map>)

        A list of rules applied to the body/payload sent in the POST request to a webhook URL. All defined rules must pass for the request to be accepted and the pipeline started.

        • jsonPathrequired — (String)

          A JsonPath expression that is applied to the body/payload of the webhook. The value selected by the JsonPath expression must match the value specified in the MatchEquals field. Otherwise, the request is ignored. For more information, see Java JsonPath implementation in GitHub.

        • matchEquals — (String)

          The value selected by the JsonPath expression must match what is supplied in the MatchEquals field. Otherwise, the request is ignored. Properties from the target action configuration can be included as placeholders in this value by surrounding the action configuration key with curly brackets. For example, if the value supplied here is "refs/heads/{Branch}" and the target action has an action configuration property called "Branch" with a value of "master", the MatchEquals value is evaluated as "refs/heads/master". For a list of action configuration properties for built-in action types, see Pipeline Structure Reference Action Requirements.

      • authenticationrequired — (String)

        Supported options are GITHUB_HMAC, IP, and UNAUTHENTICATED.

        • For information about the authentication scheme implemented by GITHUB_HMAC, see Securing your webhooks on the GitHub Developer website.

        • IP rejects webhooks trigger requests unless they originate from an IP address in the IP range whitelisted in the authentication configuration.

        • UNAUTHENTICATED accepts all webhook trigger requests regardless of origin.

        Possible values include:
        • "GITHUB_HMAC"
        • "IP"
        • "UNAUTHENTICATED"
      • authenticationConfigurationrequired — (map)

        Properties that configure the authentication applied to incoming webhook trigger requests. The required properties depend on the authentication type. For GITHUB_HMAC, only the SecretToken property must be set. For IP, only the AllowedIPRange property must be set to a valid CIDR range. For UNAUTHENTICATED, no properties can be set.

        • AllowedIPRange — (String)

          The property used to configure acceptance of webhooks in an IP address range. For IP, only the AllowedIPRange property must be set. This property must be set to a valid CIDR range.

        • SecretToken — (String)

          The property used to configure GitHub authentication. For GITHUB_HMAC, only the SecretToken property must be set.

    • tags — (Array<map>)

      The tags for the webhook.

      • keyrequired — (String)

        The tag's key.

      • valuerequired — (String)

        The tag's value.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • webhook — (map)

        The detail returned from creating the webhook, such as the webhook name, webhook URL, and webhook ARN.

        • definitionrequired — (map)

          The detail returned for each webhook, such as the webhook authentication type and filter rules.

          • namerequired — (String)

            The name of the webhook.

          • targetPipelinerequired — (String)

            The name of the pipeline you want to connect to the webhook.

          • targetActionrequired — (String)

            The name of the action in a pipeline you want to connect to the webhook. The action must be from the source (first) stage of the pipeline.

          • filtersrequired — (Array<map>)

            A list of rules applied to the body/payload sent in the POST request to a webhook URL. All defined rules must pass for the request to be accepted and the pipeline started.

            • jsonPathrequired — (String)

              A JsonPath expression that is applied to the body/payload of the webhook. The value selected by the JsonPath expression must match the value specified in the MatchEquals field. Otherwise, the request is ignored. For more information, see Java JsonPath implementation in GitHub.

            • matchEquals — (String)

              The value selected by the JsonPath expression must match what is supplied in the MatchEquals field. Otherwise, the request is ignored. Properties from the target action configuration can be included as placeholders in this value by surrounding the action configuration key with curly brackets. For example, if the value supplied here is "refs/heads/{Branch}" and the target action has an action configuration property called "Branch" with a value of "master", the MatchEquals value is evaluated as "refs/heads/master". For a list of action configuration properties for built-in action types, see Pipeline Structure Reference Action Requirements.

          • authenticationrequired — (String)

            Supported options are GITHUB_HMAC, IP, and UNAUTHENTICATED.

            • For information about the authentication scheme implemented by GITHUB_HMAC, see Securing your webhooks on the GitHub Developer website.

            • IP rejects webhooks trigger requests unless they originate from an IP address in the IP range whitelisted in the authentication configuration.

            • UNAUTHENTICATED accepts all webhook trigger requests regardless of origin.

            Possible values include:
            • "GITHUB_HMAC"
            • "IP"
            • "UNAUTHENTICATED"
          • authenticationConfigurationrequired — (map)

            Properties that configure the authentication applied to incoming webhook trigger requests. The required properties depend on the authentication type. For GITHUB_HMAC, only the SecretToken property must be set. For IP, only the AllowedIPRange property must be set to a valid CIDR range. For UNAUTHENTICATED, no properties can be set.

            • AllowedIPRange — (String)

              The property used to configure acceptance of webhooks in an IP address range. For IP, only the AllowedIPRange property must be set. This property must be set to a valid CIDR range.

            • SecretToken — (String)

              The property used to configure GitHub authentication. For GITHUB_HMAC, only the SecretToken property must be set.

        • urlrequired — (String)

          A unique URL generated by CodePipeline. When a POST request is made to this URL, the defined pipeline is started as long as the body of the post request satisfies the defined authentication and filtering conditions. Deleting and re-creating a webhook makes the old URL invalid and generates a new one.

        • errorMessage — (String)

          The text of the error message about the webhook.

        • errorCode — (String)

          The number code of the error.

        • lastTriggered — (Date)

          The date and time a webhook was last successfully triggered, in timestamp format.

        • arn — (String)

          The Amazon Resource Name (ARN) of the webhook.

        • tags — (Array<map>)

          Specifies the tags applied to the webhook.

          • keyrequired — (String)

            The tag's key.

          • valuerequired — (String)

            The tag's value.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

registerWebhookWithThirdParty(params = {}, callback) ⇒ AWS.Request

Configures a connection between the webhook that was created and the external tool with events to be detected.

Service Reference:

Examples:

Calling the registerWebhookWithThirdParty operation

var params = {
  webhookName: 'STRING_VALUE'
};
codepipeline.registerWebhookWithThirdParty(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • webhookName — (String)

      The name of an existing webhook created with PutWebhook to register with a supported third party.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

retryStageExecution(params = {}, callback) ⇒ AWS.Request

Resumes the pipeline execution by retrying the last failed actions in a stage. You can retry a stage immediately if any of the actions in the stage fail. When you retry, all actions that are still in progress continue working, and failed actions are triggered again.

Service Reference:

Examples:

Calling the retryStageExecution operation

var params = {
  pipelineExecutionId: 'STRING_VALUE', /* required */
  pipelineName: 'STRING_VALUE', /* required */
  retryMode: FAILED_ACTIONS, /* required */
  stageName: 'STRING_VALUE' /* required */
};
codepipeline.retryStageExecution(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipelineName — (String)

      The name of the pipeline that contains the failed stage.

    • stageName — (String)

      The name of the failed stage to be retried.

    • pipelineExecutionId — (String)

      The ID of the pipeline execution in the failed stage to be retried. Use the GetPipelineState action to retrieve the current pipelineExecutionId of the failed stage

    • retryMode — (String)

      The scope of the retry attempt. Currently, the only supported value is FAILED_ACTIONS.

      Possible values include:
      • "FAILED_ACTIONS"

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipelineExecutionId — (String)

        The ID of the current workflow execution in the failed stage.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

startPipelineExecution(params = {}, callback) ⇒ AWS.Request

Starts the specified pipeline. Specifically, it begins processing the latest commit to the source location specified as part of the pipeline.

Service Reference:

Examples:

Calling the startPipelineExecution operation

var params = {
  name: 'STRING_VALUE', /* required */
  clientRequestToken: 'STRING_VALUE'
};
codepipeline.startPipelineExecution(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • name — (String)

      The name of the pipeline to start.

    • clientRequestToken — (String)

      The system-generated unique ID used to identify a unique execution request.

      If a token is not provided, the SDK will use a version 4 UUID.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipelineExecutionId — (String)

        The unique system-generated ID of the pipeline execution that was started.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

tagResource(params = {}, callback) ⇒ AWS.Request

Adds to or modifies the tags of the given resource. Tags are metadata that can be used to manage a resource.

Service Reference:

Examples:

Calling the tagResource operation

var params = {
  resourceArn: 'STRING_VALUE', /* required */
  tags: [ /* required */
    {
      key: 'STRING_VALUE', /* required */
      value: 'STRING_VALUE' /* required */
    },
    /* more items */
  ]
};
codepipeline.tagResource(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • resourceArn — (String)

      The Amazon Resource Name (ARN) of the resource you want to add tags to.

    • tags — (Array<map>)

      The tags you want to modify or add to the resource.

      • keyrequired — (String)

        The tag's key.

      • valuerequired — (String)

        The tag's value.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

untagResource(params = {}, callback) ⇒ AWS.Request

Removes tags from an AWS resource.

Service Reference:

Examples:

Calling the untagResource operation

var params = {
  resourceArn: 'STRING_VALUE', /* required */
  tagKeys: [ /* required */
    'STRING_VALUE',
    /* more items */
  ]
};
codepipeline.untagResource(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • resourceArn — (String)

      The Amazon Resource Name (ARN) of the resource to remove tags from.

    • tagKeys — (Array<String>)

      The list of keys for the tags to be removed from the resource.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.

updatePipeline(params = {}, callback) ⇒ AWS.Request

Updates a specified pipeline with edits or changes to its structure. Use a JSON file with the pipeline structure and UpdatePipeline to provide the full structure of the pipeline. Updating the pipeline increases the version number of the pipeline by 1.

Service Reference:

Examples:

Calling the updatePipeline operation

var params = {
  pipeline: { /* required */
    name: 'STRING_VALUE', /* required */
    roleArn: 'STRING_VALUE', /* required */
    stages: [ /* required */
      {
        actions: [ /* required */
          {
            actionTypeId: { /* required */
              category: Source | Build | Deploy | Test | Invoke | Approval, /* required */
              owner: AWS | ThirdParty | Custom, /* required */
              provider: 'STRING_VALUE', /* required */
              version: 'STRING_VALUE' /* required */
            },
            name: 'STRING_VALUE', /* required */
            configuration: {
              '<ActionConfigurationKey>': 'STRING_VALUE',
              /* '<ActionConfigurationKey>': ... */
            },
            inputArtifacts: [
              {
                name: 'STRING_VALUE' /* required */
              },
              /* more items */
            ],
            namespace: 'STRING_VALUE',
            outputArtifacts: [
              {
                name: 'STRING_VALUE' /* required */
              },
              /* more items */
            ],
            region: 'STRING_VALUE',
            roleArn: 'STRING_VALUE',
            runOrder: 'NUMBER_VALUE'
          },
          /* more items */
        ],
        name: 'STRING_VALUE', /* required */
        blockers: [
          {
            name: 'STRING_VALUE', /* required */
            type: Schedule /* required */
          },
          /* more items */
        ]
      },
      /* more items */
    ],
    artifactStore: {
      location: 'STRING_VALUE', /* required */
      type: S3, /* required */
      encryptionKey: {
        id: 'STRING_VALUE', /* required */
        type: KMS /* required */
      }
    },
    artifactStores: {
      '<AWSRegionName>': {
        location: 'STRING_VALUE', /* required */
        type: S3, /* required */
        encryptionKey: {
          id: 'STRING_VALUE', /* required */
          type: KMS /* required */
        }
      },
      /* '<AWSRegionName>': ... */
    },
    version: 'NUMBER_VALUE'
  }
};
codepipeline.updatePipeline(params, function(err, data) {
  if (err) console.log(err, err.stack); // an error occurred
  else     console.log(data);           // successful response
});

Parameters:

  • params (Object) (defaults to: {})
    • pipeline — (map)

      The name of the pipeline to be updated.

      • namerequired — (String)

        The name of the action to be performed.

      • roleArnrequired — (String)

        The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.

      • artifactStore — (map)

        Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.

        Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
        • typerequired — (String)

          The type of the artifact store, such as S3.

          Possible values include:
          • "S3"
        • locationrequired — (String)

          The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

        • encryptionKey — (map)

          The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

          • idrequired — (String)

            The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

            Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
          • typerequired — (String)

            The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

            Possible values include:
            • "KMS"
      • artifactStores — (map<map>)

        A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline.

        Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
        • typerequired — (String)

          The type of the artifact store, such as S3.

          Possible values include:
          • "S3"
        • locationrequired — (String)

          The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

        • encryptionKey — (map)

          The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

          • idrequired — (String)

            The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

            Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
          • typerequired — (String)

            The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

            Possible values include:
            • "KMS"
      • stagesrequired — (Array<map>)

        The stage in which to perform the action.

        • namerequired — (String)

          The name of the stage.

        • blockers — (Array<map>)

          Reserved for future use.

          • namerequired — (String)

            Reserved for future use.

          • typerequired — (String)

            Reserved for future use.

            Possible values include:
            • "Schedule"
        • actionsrequired — (Array<map>)

          The actions included in a stage.

          • namerequired — (String)

            The action declaration's name.

          • actionTypeIdrequired — (map)

            Specifies the action type and the provider of the action.

            • categoryrequired — (String)

              A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

              Possible values include:
              • "Source"
              • "Build"
              • "Deploy"
              • "Test"
              • "Invoke"
              • "Approval"
            • ownerrequired — (String)

              The creator of the action being called.

              Possible values include:
              • "AWS"
              • "ThirdParty"
              • "Custom"
            • providerrequired — (String)

              The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

            • versionrequired — (String)

              A string that describes the action version.

          • runOrder — (Integer)

            The order in which actions are run.

          • configuration — (map<String>)

            The action's configuration. These are key-value pairs that specify input values for an action. For more information, see Action Structure Requirements in CodePipeline. For the list of configuration properties for the AWS CloudFormation action type in CodePipeline, see Configuration Properties Reference in the AWS CloudFormation User Guide. For template snippets with examples, see Using Parameter Override Functions with CodePipeline Pipelines in the AWS CloudFormation User Guide.

            The values can be represented in either JSON or YAML format. For example, the JSON configuration item format is as follows:

            JSON:

            "Configuration" : { Key : Value },

          • outputArtifacts — (Array<map>)

            The name or ID of the result of the action declaration, such as a test or build artifact.

            • namerequired — (String)

              The name of the output of an artifact, such as "My App".

              The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

              Output artifact names must be unique within a pipeline.

          • inputArtifacts — (Array<map>)

            The name or ID of the artifact consumed by the action, such as a test or build artifact.

            • namerequired — (String)

              The name of the artifact to be worked on (for example, "My App").

              The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

          • roleArn — (String)

            The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline.

          • region — (String)

            The action declaration's AWS Region, such as us-east-1.

          • namespace — (String)

            The variable namespace associated with the action. All variables produced as output by this action fall under this namespace.

      • version — (Integer)

        The version number of the pipeline. A new pipeline always has a version number of 1. This number is incremented when a pipeline is updated.

Callback (callback):

  • function(err, data) { ... }

    Called when a response from the service is returned. If a callback is not supplied, you must call AWS.Request.send() on the returned request object to initiate the request.

    Context (this):

    • (AWS.Response)

      the response object containing error, data properties, and the original request object.

    Parameters:

    • err (Error)

      the error object returned from the request. Set to null if the request is successful.

    • data (Object)

      the de-serialized data returned from the request. Set to null if a request error occurs. The data object has the following properties:

      • pipeline — (map)

        The structure of the updated pipeline.

        • namerequired — (String)

          The name of the action to be performed.

        • roleArnrequired — (String)

          The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.

        • artifactStore — (map)

          Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.

          Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
          • typerequired — (String)

            The type of the artifact store, such as S3.

            Possible values include:
            • "S3"
          • locationrequired — (String)

            The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

          • encryptionKey — (map)

            The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • artifactStores — (map<map>)

          A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline.

          Note: You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores.
          • typerequired — (String)

            The type of the artifact store, such as S3.

            Possible values include:
            • "S3"
          • locationrequired — (String)

            The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.

          • encryptionKey — (map)

            The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.

            • idrequired — (String)

              The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN.

              Note: Aliases are recognized only in the account that created the customer master key (CMK). For cross-account actions, you can only use the key ID or key ARN to identify the key.
            • typerequired — (String)

              The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.

              Possible values include:
              • "KMS"
        • stagesrequired — (Array<map>)

          The stage in which to perform the action.

          • namerequired — (String)

            The name of the stage.

          • blockers — (Array<map>)

            Reserved for future use.

            • namerequired — (String)

              Reserved for future use.

            • typerequired — (String)

              Reserved for future use.

              Possible values include:
              • "Schedule"
          • actionsrequired — (Array<map>)

            The actions included in a stage.

            • namerequired — (String)

              The action declaration's name.

            • actionTypeIdrequired — (map)

              Specifies the action type and the provider of the action.

              • categoryrequired — (String)

                A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

                Possible values include:
                • "Source"
                • "Build"
                • "Deploy"
                • "Test"
                • "Invoke"
                • "Approval"
              • ownerrequired — (String)

                The creator of the action being called.

                Possible values include:
                • "AWS"
                • "ThirdParty"
                • "Custom"
              • providerrequired — (String)

                The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline.

              • versionrequired — (String)

                A string that describes the action version.

            • runOrder — (Integer)

              The order in which actions are run.

            • configuration — (map<String>)

              The action's configuration. These are key-value pairs that specify input values for an action. For more information, see Action Structure Requirements in CodePipeline. For the list of configuration properties for the AWS CloudFormation action type in CodePipeline, see Configuration Properties Reference in the AWS CloudFormation User Guide. For template snippets with examples, see Using Parameter Override Functions with CodePipeline Pipelines in the AWS CloudFormation User Guide.

              The values can be represented in either JSON or YAML format. For example, the JSON configuration item format is as follows:

              JSON:

              "Configuration" : { Key : Value },

            • outputArtifacts — (Array<map>)

              The name or ID of the result of the action declaration, such as a test or build artifact.

              • namerequired — (String)

                The name of the output of an artifact, such as "My App".

                The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

                Output artifact names must be unique within a pipeline.

            • inputArtifacts — (Array<map>)

              The name or ID of the artifact consumed by the action, such as a test or build artifact.

              • namerequired — (String)

                The name of the artifact to be worked on (for example, "My App").

                The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.

            • roleArn — (String)

              The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline.

            • region — (String)

              The action declaration's AWS Region, such as us-east-1.

            • namespace — (String)

              The variable namespace associated with the action. All variables produced as output by this action fall under this namespace.

        • version — (Integer)

          The version number of the pipeline. A new pipeline always has a version number of 1. This number is incremented when a pipeline is updated.

Returns:

  • (AWS.Request)

    a handle to the operation request for subsequent event callback registration.