AWS::EC2::SecurityGroupIngress - Amazon CloudFormation
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

AWS::EC2::SecurityGroupIngress

Adds an inbound (ingress) rule to a security group.

An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP addresses that are specified by a prefix list, or the instances that are associated with a source security group. For more information, see Security group rules.

You must specify exactly one of the following sources: an IPv4 address range, an IPv6 address range, a prefix list, or a security group.

You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.

Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.

Syntax

To declare this entity in your Amazon CloudFormation template, use the following syntax:

JSON

{ "Type" : "AWS::EC2::SecurityGroupIngress", "Properties" : { "CidrIp" : String, "CidrIpv6" : String, "Description" : String, "FromPort" : Integer, "GroupId" : String, "GroupName" : String, "IpProtocol" : String, "SourcePrefixListId" : String, "SourceSecurityGroupId" : String, "SourceSecurityGroupName" : String, "SourceSecurityGroupOwnerId" : String, "ToPort" : Integer } }

YAML

Type: AWS::EC2::SecurityGroupIngress Properties: CidrIp: String CidrIpv6: String Description: String FromPort: Integer GroupId: String GroupName: String IpProtocol: String SourcePrefixListId: String SourceSecurityGroupId: String SourceSecurityGroupName: String SourceSecurityGroupOwnerId: String ToPort: Integer

Properties

CidrIp

The IPv4 address range, in CIDR format.

You must specify exactly one of the following: CidrIp, CidrIpv6, SourcePrefixListId, or SourceSecurityGroupId.

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide.

Required: No

Type: String

Update requires: Replacement

CidrIpv6

The IPv6 address range, in CIDR format.

You must specify exactly one of the following: CidrIp, CidrIpv6, SourcePrefixListId, or SourceSecurityGroupId.

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide.

Required: No

Type: String

Update requires: Replacement

Description

Updates the description of an ingress (inbound) security group rule. You can replace an existing description, or add a description to a rule that did not have one previously.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

Required: No

Type: String

Update requires: No interruption

FromPort

The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.

Use this for ICMP and any protocol that uses ports.

Required: No

Type: Integer

Update requires: Replacement

GroupId

The ID of the security group.

Required: No

Type: String

Update requires: Replacement

GroupName

The name of the security group.

Constraints: Up to 255 characters in length. Cannot start with sg-.

Valid characters: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*

Required: No

Type: String

Update requires: Replacement

IpProtocol

The IP protocol name (tcp, udp, icmp, icmpv6) or number (see Protocol Numbers).

Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp, udp, icmp, or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp, udp, and icmp, you must specify a port range. For icmpv6, the port range is optional; if you omit the port range, traffic for all types and codes is allowed.

Required: Yes

Type: String

Update requires: Replacement

SourcePrefixListId

The ID of a prefix list.

Required: No

Type: String

Update requires: Replacement

SourceSecurityGroupId

The ID of the security group. You must specify either the security group ID or the security group name. For security groups in a nondefault VPC, you must specify the security group ID.

Required: No

Type: String

Update requires: Replacement

SourceSecurityGroupName

[Default VPC] The name of the source security group. You must specify either the security group ID or the security group name. You can't specify the group name in combination with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.

For security groups in a nondefault VPC, you must specify the group ID.

Required: No

Type: String

Update requires: Replacement

SourceSecurityGroupOwnerId

[nondefault VPC] The Amazon account ID for the source security group, if the source security group is in a different account. You can't specify this property with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.

If you specify SourceSecurityGroupName or SourceSecurityGroupId and that security group is owned by a different account than the account creating the stack, you must specify SourceSecurityGroupOwnerId; otherwise, this property is optional.

Required: Conditional

Type: String

Update requires: Replacement

ToPort

The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. A value of -1 indicates all ICMP/ICMPv6 codes for the specified ICMP type. If you specify all ICMP/ICMPv6 types, you must specify all codes.

Use this for ICMP and any protocol that uses ports.

Required: No

Type: Integer

Update requires: Replacement

Examples

VPC security groups with egress and ingress rules

In some cases, you might have an originating (source) security group to which you want to add an outbound rule that allows traffic to a destination (target) security group. The target security group also needs an inbound rule that allows traffic from the source security group. Note that you cannot use the Ref function to specify the outbound and inbound rules for each security group. Doing so creates a circular dependency; you cannot have two resources that depend on each other. Instead, use the egress and ingress resources to declare these outbound and inbound rules, as shown in the following template example.

JSON

{ "Resources": { "SourceSG": { "Type": "AWS::EC2::SecurityGroup", "Properties": { "VpcId" : "vpc-1a2b3c4d", "GroupDescription": "Sample source security group" } }, "TargetSG": { "Type": "AWS::EC2::SecurityGroup", "Properties": { "VpcId" : "vpc-1a2b3c4d", "GroupDescription": "Sample target security group" } }, "OutboundRule": { "Type": "AWS::EC2::SecurityGroupEgress", "Properties":{ "IpProtocol": "tcp", "FromPort": 0, "ToPort": 65535, "DestinationSecurityGroupId": { "Fn::GetAtt": [ "TargetSG", "GroupId" ] }, "GroupId": { "Fn::GetAtt": [ "SourceSG", "GroupId" ] } } }, "InboundRule": { "Type": "AWS::EC2::SecurityGroupIngress", "Properties":{ "IpProtocol": "tcp", "FromPort": 0, "ToPort": 65535, "SourceSecurityGroupId": { "Fn::GetAtt": [ "SourceSG", "GroupId" ] }, "GroupId": { "Fn::GetAtt": [ "TargetSG", "GroupId" ] } } } } }

YAML

Resources: SourceSG: Type: AWS::EC2::SecurityGroup Properties: VpcId: vpc-1a2b3c4d GroupDescription: Sample source security group TargetSG: Type: AWS::EC2::SecurityGroup Properties: VpcId: vpc-1a2b3c4d GroupDescription: Sample target security group OutboundRule: Type: AWS::EC2::SecurityGroupEgress Properties: IpProtocol: tcp FromPort: 0 ToPort: 65535 DestinationSecurityGroupId: Fn::GetAtt: - TargetSG - GroupId GroupId: Fn::GetAtt: - SourceSG - GroupId InboundRule: Type: AWS::EC2::SecurityGroupIngress Properties: IpProtocol: tcp FromPort: 0 ToPort: 65535 SourceSecurityGroupId: Fn::GetAtt: - SourceSG - GroupId GroupId: Fn::GetAtt: - TargetSG - GroupId

Allow traffic from a security group in a peered VPC

The following example allows one-way traffic from an originating (source) security group to a destination (target) security group. However, in this example the security groups are in peered VPCs across Amazon accounts. You might want to allow cross-account traffic if, for example, you create a security scanning resource in one Amazon account that you'll use to run diagnostics in another account. This example adds an ingress rule to a target VPC security group that allows incoming traffic from a source security group in a different Amazon account. Note that the source security group also needs an egress rule that allows outgoing traffic to the target security group. Because the source security group is in a different account, the following example doesn't use the Ref function to reference the source security group ID but instead directly specifies the security group ID sg-12345678.

JSON

{ "AWSTemplateFormatVersion": "2010-09-09", "Resources": { "TargetSG": { "Type": "AWS::EC2::SecurityGroup", "Properties": { "VpcId": "vpc-1a2b3c4d", "GroupDescription": "Security group allowing ingress for security scanners" } }, "InboundRule": { "Type": "AWS::EC2::SecurityGroupIngress", "Properties": { "GroupId": { "Fn::GetAtt": [ "TargetSG", "GroupId" ] }, "IpProtocol": "tcp", "FromPort": 80, "ToPort": 80, "SourceSecurityGroupId": "sg-12345678", "SourceSecurityGroupOwnerId": "123456789012" } } } }

YAML

AWSTemplateFormatVersion: 2010-09-09 Resources: TargetSG: Type: 'AWS::EC2::SecurityGroup' Properties: VpcId: vpc-1a2b3c4d GroupDescription: Security group allowing ingress for security scanners InboundRule: Type: 'AWS::EC2::SecurityGroupIngress' Properties: GroupId: !GetAtt TargetSG.GroupId IpProtocol: tcp FromPort: 80 ToPort: 80 SourceSecurityGroupId: sg-12345678 SourceSecurityGroupOwnerId: '123456789012'