AWS::MediaLive::Channel M2tsSettings - Amazon CloudFormation
SyntaxProperties
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

AWS::MediaLive::Channel M2tsSettings

The configuration of the M2TS in the output.

The parents of this entity are ArchiveContainerSettings and UdpContainerSettings.

Syntax

To declare this entity in your Amazon CloudFormation template, use the following syntax:

JSON

{
  "AbsentInputAudioBehavior" : String,
  "Arib" : String,
  "AribCaptionsPid" : String,
  "AribCaptionsPidControl" : String,
  "AudioBufferModel" : String,
  "AudioFramesPerPes" : Integer,
  "AudioPids" : String,
  "AudioStreamType" : String,
  "Bitrate" : Integer,
  "BufferModel" : String,
  "CcDescriptor" : String,
  "DvbNitSettings" : DvbNitSettings,
  "DvbSdtSettings" : DvbSdtSettings,
  "DvbSubPids" : String,
  "DvbTdtSettings" : DvbTdtSettings,
  "DvbTeletextPid" : String,
  "Ebif" : String,
  "EbpAudioInterval" : String,
  "EbpLookaheadMs" : Integer,
  "EbpPlacement" : String,
  "EcmPid" : String,
  "EsRateInPes" : String,
  "EtvPlatformPid" : String,
  "EtvSignalPid" : String,
  "FragmentTime" : Number,
  "Klv" : String,
  "KlvDataPids" : String,
  "NielsenId3Behavior" : String,
  "NullPacketBitrate" : Number,
  "PatInterval" : Integer,
  "PcrControl" : String,
  "PcrPeriod" : Integer,
  "PcrPid" : String,
  "PmtInterval" : Integer,
  "PmtPid" : String,
  "ProgramNum" : Integer,
  "RateMode" : String,
  "Scte27Pids" : String,
  "Scte35Control" : String,
  "Scte35Pid" : String,
  "Scte35PrerollPullupMilliseconds" : Number,
  "SegmentationMarkers" : String,
  "SegmentationStyle" : String,
  "SegmentationTime" : Number,
  "TimedMetadataBehavior" : String,
  "TimedMetadataPid" : String,
  "TransportStreamId" : Integer,
  "VideoPid" : String
}

Properties

AbsentInputAudioBehavior

When set to drop, the output audio streams are removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on the input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.

Required: No

Type: String

Update requires: No interruption

Arib

When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.

Required: No

Type: String

Update requires: No interruption

AribCaptionsPid

The PID for ARIB Captions in the transport stream. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

AribCaptionsPidControl

If set to auto, The PID number used for ARIB Captions will be auto-selected from unused PIDs. If set to useConfigured, ARIB captions will be on the configured PID number.

Required: No

Type: String

Update requires: No interruption

AudioBufferModel

When set to dvb, uses the DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.

Required: No

Type: String

Update requires: No interruption

AudioFramesPerPes

The number of audio frames to insert for each PES packet.

Required: No

Type: Integer

Update requires: No interruption

AudioPids

The PID of the elementary audio streams in the transport stream. Multiple values are accepted, and can be entered in ranges or by comma separation. You can enter the value as a decimal or hexadecimal value. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

AudioStreamType

When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.

Required: No

Type: String

Update requires: No interruption

Bitrate

The output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate.

Required: No

Type: Integer

Update requires: No interruption

BufferModel

If set to multiplex, uses the multiplex buffer model for accurate interleaving. Setting to bufferModel to none can lead to lower latency, but low-memory devices might not be able to play back the stream without interruptions.

Required: No

Type: String

Update requires: No interruption

CcDescriptor

When set to enabled, generates captionServiceDescriptor in PMT.

Required: No

Type: String

Update requires: No interruption

DvbNitSettings

Inserts a DVB Network Information Table (NIT) at the specified table repetition interval.

Required: No

Type: DvbNitSettings

Update requires: No interruption

DvbSdtSettings

Inserts a DVB Service Description Table (SDT) at the specified table repetition interval.

Required: No

Type: DvbSdtSettings

Update requires: No interruption

DvbSubPids

The PID for the input source DVB Subtitle data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. You can enter the value as a decimal or hexadecimal value. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

DvbTdtSettings

Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.

Required: No

Type: DvbTdtSettings

Update requires: No interruption

DvbTeletextPid

The PID for the input source DVB Teletext data to this output. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

Ebif

If set to passthrough, passes any EBIF data from the input source to this output.

Required: No

Type: String

Update requires: No interruption

EbpAudioInterval

When videoAndFixedIntervals is selected, audio EBP markers are added to partitions 3 and 4. The interval between these additional markers is fixed, and is slightly shorter than the video EBP marker interval. This is only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 always follow the video interval.

Required: No

Type: String

Update requires: No interruption

EbpLookaheadMs

When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The channel must be configured elsewhere to create sufficient latency to make the lookahead accurate.

Required: No

Type: Integer

Update requires: No interruption

EbpPlacement

Controls placement of EBP on audio PIDs. If set to videoAndAudioPids, EBP markers are placed on the video PID and all audio PIDs. If set to videoPid, EBP markers are placed on only the video PID.

Required: No

Type: String

Update requires: No interruption

EcmPid

This field is unused and deprecated.

Required: No

Type: String

Update requires: No interruption

EsRateInPes

Includes or excludes the ES Rate field in the PES header.

Required: No

Type: String

Update requires: No interruption

EtvPlatformPid

The PID for the input source ETV Platform data to this output. You can enter it as a decimal or hexadecimal value. Valid values are 32 (or 0x20) to 8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

EtvSignalPid

The PID for input source ETV Signal data to this output. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

FragmentTime

The length in seconds of each fragment. This is used only with EBP markers.

Required: No

Type: Number

Update requires: No interruption

Klv

If set to passthrough, passes any KLV data from the input source to this output.

Required: No

Type: String

Update requires: No interruption

KlvDataPids

The PID for the input source KLV data to this output. Multiple values are accepted, and can be entered in ranges or by comma separation. You can enter the value as a decimal or hexadecimal value. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

NielsenId3Behavior

If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

Required: No

Type: String

Update requires: No interruption

NullPacketBitrate

The value, in bits per second, of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.

Required: No

Type: Number

Update requires: No interruption

PatInterval

The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

Required: No

Type: Integer

Update requires: No interruption

PcrControl

When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

Required: No

Type: String

Update requires: No interruption

PcrPeriod

The maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.

Required: No

Type: Integer

Update requires: No interruption

PcrPid

The PID of the Program Clock Reference (PCR) in the transport stream. When no value is given, MediaLive assigns the same value as the video PID. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

PmtInterval

The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

Required: No

Type: Integer

Update requires: No interruption

PmtPid

The PID for the Program Map Table (PMT) in the transport stream. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

ProgramNum

The value of the program number field in the Program Map Table (PMT).

Required: No

Type: Integer

Update requires: No interruption

RateMode

When VBR, does not insert null packets into the transport stream to fill the specified bitrate. The bitrate setting acts as the maximum bitrate when VBR is set.

Required: No

Type: String

Update requires: No interruption

Scte27Pids

The PID for the input source SCTE-27 data to this output. Multiple values are accepted, and can be entered in ranges or by comma separation. You can enter the value as a decimal or hexadecimal value. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

Scte35Control

Optionally passes SCTE-35 signals from the input source to this output.

Required: No

Type: String

Update requires: No interruption

Scte35Pid

The PID of the SCTE-35 stream in the transport stream. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

Scte35PrerollPullupMilliseconds

Property description not available.

Required: No

Type: Number

Update requires: No interruption

SegmentationMarkers

Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.

Required: No

Type: String

Update requires: No interruption

SegmentationStyle

The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments might be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of resetCadence is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of maintainCadence is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.

Required: No

Type: String

Update requires: No interruption

SegmentationTime

The length, in seconds, of each segment. This is required unless markers is set to None_.

Required: No

Type: Number

Update requires: No interruption

TimedMetadataBehavior

When set to passthrough, timed metadata is passed through from input to output.

Required: No

Type: String

Update requires: No interruption

TimedMetadataPid

The PID of the timed metadata stream in the transport stream. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption

TransportStreamId

The value of the transport stream ID field in the Program Map Table (PMT).

Required: No

Type: Integer

Update requires: No interruption

VideoPid

The PID of the elementary video stream in the transport stream. You can enter the value as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Required: No

Type: String

Update requires: No interruption