AWS::Transfer::Server

Instantiates an auto-scaling virtual server based on the selected file transfer protocol in Amazon. When you make updates to your file transfer protocol-enabled server or when you work with users, use the service-generated ServerId property that is assigned to the newly created server.

Syntax

To declare this entity in your Amazon CloudFormation template, use the following syntax:

JSON


{
  "Type" : "AWS::Transfer::Server",
  "Properties" : {
      "Certificate" : String,
      "Domain" : String,
      "EndpointDetails" : EndpointDetails,
      "EndpointType" : String,
      "IdentityProviderDetails" : IdentityProviderDetails,
      "IdentityProviderType" : String,
      "IpAddressType" : String,
      "LoggingRole" : String,
      "PostAuthenticationLoginBanner" : String,
      "PreAuthenticationLoginBanner" : String,
      "ProtocolDetails" : ProtocolDetails,
      "Protocols" : [ String, ... ],
      "S3StorageOptions" : S3StorageOptions,
      "SecurityPolicyName" : String,
      "StructuredLogDestinations" : [ String, ... ],
      "Tags" : [ Tag, ... ],
      "WorkflowDetails" : WorkflowDetails
    }
}

YAML


Type: AWS::Transfer::Server
Properties:
  Certificate: String
  Domain: String
  EndpointDetails: 
    EndpointDetails
  EndpointType: String
  IdentityProviderDetails: 
    IdentityProviderDetails
  IdentityProviderType: String
  IpAddressType: String
  LoggingRole: String
  PostAuthenticationLoginBanner: String
  PreAuthenticationLoginBanner: String
  ProtocolDetails: 
    ProtocolDetails
  Protocols: 
    - String
  S3StorageOptions: 
    S3StorageOptions
  SecurityPolicyName: String
  StructuredLogDestinations: 
    - String
  Tags: 
    - Tag
  WorkflowDetails: 
    WorkflowDetails

Properties

Certificate

The Amazon Resource Name (ARN) of the Amazon Certificate Manager (ACM) certificate. Required when Protocols is set to FTPS.

To request a new public certificate, see Request a public certificate in the Amazon Certificate Manager User Guide.

To import an existing certificate into ACM, see Importing certificates into ACM in the Amazon Certificate Manager User Guide.

To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the Amazon Certificate Manager User Guide.

Certificates with the following cryptographic algorithms and key sizes are supported:

2048-bit RSA (RSA_2048)
4096-bit RSA (RSA_4096)
Elliptic Prime Curve 256 bit (EC_prime256v1)
Elliptic Prime Curve 384 bit (EC_secp384r1)
Elliptic Prime Curve 521 bit (EC_secp521r1)

Note

The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.

Required: No

Type: String

Minimum: 0

Maximum: 1600

Update requires: No interruption

Domain

Specifies the domain of the storage system that is used for file transfers. There are two domains available: Amazon Simple Storage Service (Amazon S3) and Amazon Elastic File System (Amazon EFS). The default value is S3.

Required: No

Type: String

Allowed values: S3 | EFS

Update requires: Replacement

EndpointDetails

The virtual private cloud (VPC) endpoint settings that are configured for your server. When you host your endpoint within your VPC, you can make your endpoint accessible only to resources within your VPC, or you can attach Elastic IP addresses and make your endpoint accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.

Required: No

Type: EndpointDetails

Update requires: Some interruptions

EndpointType

The type of endpoint that you want your server to use. You can choose to make your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC. With an endpoint that is hosted in a VPC, you can restrict access to your server and resources only within your VPC or choose to make it internet facing by attaching Elastic IP addresses directly to it.

Note

After May 19, 2021, you won't be able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web Services account if your account hasn't already done so before May 19, 2021. If you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon Web Services account on or before May 19, 2021, you will not be affected. After this date, use EndpointType = VPC .

For more information, see Discontinuing the use of VPC_ENDPOINT .

It is recommended that you use VPC as the EndpointType . With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT .

Required: No

Type: String

Allowed values: PUBLIC | VPC | VPC_ENDPOINT

Update requires: No interruption

IdentityProviderDetails

Required when IdentityProviderType is set to AWS_DIRECTORY_SERVICE, Amazon_LAMBDA or API_GATEWAY. Accepts an array containing all of the information required to use a directory in AWS_DIRECTORY_SERVICE or invoke a customer-supplied authentication API, including the API Gateway URL. Cannot be specified when IdentityProviderType is set to SERVICE_MANAGED.

Required: No

Type: IdentityProviderDetails

Update requires: No interruption

IdentityProviderType

The mode of authentication for a server. The default value is SERVICE_MANAGED, which allows you to store and access user credentials within the Amazon Transfer Family service.

Use AWS_DIRECTORY_SERVICE to provide access to Active Directory groups in Amazon Directory Service for Microsoft Active Directory or Microsoft Active Directory in your on-premises environment or in Amazon using AD Connector. This option also requires you to provide a Directory ID by using the IdentityProviderDetails parameter.

Use the API_GATEWAY value to integrate with an identity provider of your choosing. The API_GATEWAY setting requires you to provide an Amazon API Gateway endpoint URL to call for authentication by using the IdentityProviderDetails parameter.

Use the AWS_LAMBDA value to directly use an Amazon Lambda function as your identity provider. If you choose this value, you must specify the ARN for the Lambda function in the Function parameter for the IdentityProviderDetails data type.

Required: No

Type: String

Allowed values: SERVICE_MANAGED | API_GATEWAY | AWS_DIRECTORY_SERVICE | AWS_LAMBDA

Update requires: No interruption

IpAddressType

Specifies whether to use IPv4 only, or to use dual-stack (IPv4 and IPv6) for your Amazon Transfer Family endpoint. The default value is IPV4.

Important

The IpAddressType parameter has the following limitations:

It cannot be changed while the server is online. You must stop the server before modifying this parameter.
It cannot be updated to DUALSTACK if the server has AddressAllocationIds specified.

Note

When using DUALSTACK as the IpAddressType, you cannot set the AddressAllocationIds parameter for the EndpointDetails for the server.

Required: No

Type: String

Allowed values: IPV4 | DUALSTACK

Update requires: Some interruptions

LoggingRole

The Amazon Resource Name (ARN) of the Amazon Identity and Access Management (IAM) role that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or Amazon EFS events. When set, you can view user activity in your CloudWatch logs.

Required: No

Type: String

Pattern: ^(|arn:.*role/\S+)$

Minimum: 0

Maximum: 2048

Update requires: No interruption

PostAuthenticationLoginBanner

Specifies a string to display when users connect to a server. This string is displayed after the user authenticates.

Note

The SFTP protocol does not support post-authentication display banners.

Required: No

Type: String

Pattern: ^[\x09-\x0D\x20-\x7E]*$

Minimum: 0

Maximum: 4096

Update requires: No interruption

PreAuthenticationLoginBanner

Specifies a string to display when users connect to a server. This string is displayed before the user authenticates. For example, the following banner displays details about using the system:

This system is for the use of authorized users only. Individuals using this computer system without authority, or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by system personnel.

Required: No

Type: String

Pattern: ^[\x09-\x0D\x20-\x7E]*$

Minimum: 0

Maximum: 4096

Update requires: No interruption

ProtocolDetails

The protocol settings that are configured for your server.

To indicate passive mode (for FTP and FTPS protocols), use the PassiveIp parameter. Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.
To ignore the error that is generated when the client attempts to use the SETSTAT command on a file that you are uploading to an Amazon S3 bucket, use the SetStatOption parameter. To have the Amazon Transfer Family server ignore the SETSTAT command and upload files without needing to make any changes to your SFTP client, set the value to ENABLE_NO_OP . If you set the SetStatOption parameter to ENABLE_NO_OP , Transfer Family generates a log entry to Amazon CloudWatch Logs, so that you can determine when the client is making a SETSTAT call.
To determine whether your Amazon Transfer Family server resumes recent, negotiated sessions through a unique session ID, use the TlsSessionResumptionMode parameter.
As2Transports indicates the transport method for the AS2 messages. Currently, only HTTP is supported.

The Protocols parameter is an array of strings.

Allowed values : One or more of SFTP , FTPS , FTP , AS2

Required: No

Type: ProtocolDetails

Update requires: No interruption

Protocols

Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:

SFTP (Secure Shell (SSH) File Transfer Protocol): File transfer over SSH
FTPS (File Transfer Protocol Secure): File transfer with TLS encryption
FTP (File Transfer Protocol): Unencrypted file transfer
AS2 (Applicability Statement 2): used for transporting structured business-to-business data

Note

If you select FTPS , you must choose a certificate stored in Amazon Certificate Manager (ACM) which is used to identify your server when clients connect to it over FTPS.
If Protocol includes either FTP or FTPS , then the EndpointType must be VPC and the IdentityProviderType must be either AWS_DIRECTORY_SERVICE , AWS_LAMBDA , or API_GATEWAY .
If Protocol includes FTP , then AddressAllocationIds cannot be associated.
If Protocol is set only to SFTP , the EndpointType can be set to PUBLIC and the IdentityProviderType can be set any of the supported identity types: SERVICE_MANAGED , AWS_DIRECTORY_SERVICE , AWS_LAMBDA , or API_GATEWAY .
If Protocol includes AS2 , then the EndpointType must be VPC , and domain must be Amazon S3.

The Protocols parameter is an array of strings.

Allowed values : One or more of SFTP , FTPS , FTP , AS2

Required: No

Type: Array of String

Minimum: 1

Maximum: 4

Update requires: No interruption

S3StorageOptions

Specifies whether or not performance for your Amazon S3 directories is optimized.

If using the console, this is enabled by default.
If using the API or CLI, this is disabled by default.

By default, home directory mappings have a TYPE of DIRECTORY. If you enable this option, you would then need to explicitly set the HomeDirectoryMapEntryType to FILE if you want a mapping to have a file target.

Required: No

Type: S3StorageOptions

Update requires: No interruption

SecurityPolicyName

Specifies the name of the security policy for the server.

Required: No

Type: String

Pattern: ^TransferSecurityPolicy-.+$

Minimum: 0

Maximum: 100

Update requires: No interruption

StructuredLogDestinations

Specifies the log groups to which your server logs are sent.

To specify a log group, you must provide the ARN for an existing log group. In this case, the format of the log group is as follows:

arn:aws:logs:region-name:amazon-account-id:log-group:log-group-name:*

For example, arn:aws:logs:us-east-1:111122223333:log-group:mytestgroup:*

If you have previously specified a log group for a server, you can clear it, and in effect turn off structured logging, by providing an empty value for this parameter in an update-server call. For example:

update-server --server-id s-1234567890abcdef0 --structured-log-destinations

Required: No

Type: Array of String

Minimum: 20 | 0

Maximum: 1600 | 1

Update requires: No interruption

Tags

Key-value pairs that can be used to group and search for servers.

Required: No

Type: Array of Tag

Minimum: 1

Maximum: 50

Update requires: No interruption

WorkflowDetails

Specifies the workflow ID for the workflow to assign and the execution role that's used for executing the workflow.

In addition to a workflow to execute when a file is uploaded completely, WorkflowDetails can also contain a workflow ID (and execution role) for a workflow to execute on partial upload. A partial upload occurs when a file is open when the session disconnects.

Required: No

Type: WorkflowDetails

Update requires: No interruption

Return values

Ref

When you pass the logical ID of this resource to the intrinsic Ref function, Ref returns the server ARN, such as arn:aws:transfer:us-east-1:123456789012:server/s-01234567890abcdef .

For more information about using the Ref function, see Ref.

Fn::GetAtt

The Fn::GetAtt intrinsic function returns a value for a specified attribute of this type. The following are the available attributes and sample return values.

For more information about using the Fn::GetAtt intrinsic function, see Fn::GetAtt.

Arn

Specifies the unique Amazon Resource Name (ARN) of the server.

As2ServiceManagedEgressIpAddresses

The list of egress IP addresses of this server. These IP addresses are only relevant for servers that use the AS2 protocol. They are used for sending asynchronous MDNs.

These IP addresses are assigned automatically when you create an AS2 server. Additionally, if you update an existing server and add the AS2 protocol, static IP addresses are assigned as well.

ServerId

Specifies the unique system-assigned identifier for a server that you instantiate.

State

The condition of the server that was described. A value of ONLINE indicates that the server can accept jobs and transfer files. A State value of OFFLINE means that the server cannot perform file transfer operations.

The states of STARTING and STOPPING indicate that the server is in an intermediate state, either not fully able to respond, or not fully offline. The values of START_FAILED or STOP_FAILED can indicate an error condition.

Javascript is disabled or is unavailable in your browser.

To use the Amazon Web Services Documentation, Javascript must be enabled. Please refer to your browser's Help pages for instructions.

Tag

EndpointDetails