Request Amazon EBS volume modifications - Amazon EBS
Modify an EBS volume using Elastic VolumesModify an EBS volume if Elastic Volumes is not supportedInitialize Elastic Volumes support (if needed)
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Request Amazon EBS volume modifications

With Elastic Volumes, you can dynamically increase the size, increase or decrease the performance, and change the volume type of your Amazon EBS volumes without detaching them.

Process overview

  1. (Optional) Before modifying a volume that contains valuable data, it is a best practice to create a snapshot of the volume in case you need to roll back your changes. For more information, see Create Amazon EBS snapshots.

  2. Request the volume modification.

  3. Monitor the progress of the volume modification. For more information, see Monitor the progress of Amazon EBS volume modifications.

  4. If the size of the volume was modified, extend the volume's file system to take advantage of the increased storage capacity. For more information, see Extend the file system after resizing an Amazon EBS volume.

Modify an EBS volume using Elastic Volumes

Before you begin, see the following:

Console
To modify an EBS volume

  1. Open the Amazon EC2 console at https://console.amazonaws.cn/ec2/.

  2. In the navigation pane, choose Volumes.

  3. Select the volume to modify and choose Actions, Modify volume.

  4. The Modify volume screen displays the volume ID and the volume's current configuration, including type, size, IOPS, and throughput. Set new configuration values as follows:

    • To modify the type, choose a value for Volume type.

    • To modify the size, enter a new value for Size.

    • (gp3, io1, and io2 only) To modify the IOPS, enter a new value for IOPS.

    • (gp3 only) To modify the throughput, enter a new value for Throughput.

  5. After you have finished changing the volume settings, choose Modify. When prompted for confirmation, choose Modify.

  6. If you've increased the size of your volume, then you must also extend the volume's partition to make use of the additional storage capacity. For more information, see Extend the file system after resizing an Amazon EBS volume.

  7. (Windows instances only) If you increase the size of an NVMe volume on an instance that does not have the Amazon NVMe drivers, you must reboot the instance to enable Windows to see the new volume size. For more information about installing the Amazon NVMe drivers, see Amazon NVMe drivers.

Amazon CLI
To modify an EBS volume

Use the modify-volume command. For example, if you have a volume of type gp2 with a size of 100 GiB, the following example changes its configuration to a volume of type io1 with 10,000 IOPS and a size of 200 GiB.

aws ec2 modify-volume \
    --volume-id vol-01234567890abcdef \
    --volume-type io1 \
    --iops 10000 \
    --size 200

The following is example output.

{
    "VolumeModification": {
        "TargetSize": 200,
        "TargetVolumeType": "io1",
        "ModificationState": "modifying",
        "VolumeId": "vol-01234567890abcdef",
        "TargetIops": 10000,
        "StartTime": "2022-01-19T22:21:02.959Z",
        "Progress": 0,
        "OriginalVolumeType": "gp2",
        "OriginalIops": 300,
        "OriginalSize": 100
    }
}

If you've increased the size of your volume, then you must also extend the volume's partition to make use of the additional storage capacity. For more information, see Extend the file system after resizing an Amazon EBS volume.

PowerShell
To modify an EBS volume

Use the Edit-EC2Volume cmdlet. For example, if you have a volume of type gp2 with a size of 100 GiB, the following example changes its configuration to a volume of type io1 with 10,000 IOPS and a size of 200 GiB.

Edit-EC2Volume `
    -VolumeId vol-01234567890abcdef `
    -VolumeType io1 `
    -Iops 10000 `
    -Size 200

If you've increased the size of your volume, then you must also extend the volume's partition to make use of the additional storage capacity. For more information, see Extend the file system after resizing an Amazon EBS volume.

Modify an EBS volume if Elastic Volumes is not supported

If you are using a supported instance type, you can use Elastic Volumes to dynamically modify the size, performance, and volume type of your Amazon EBS volumes without detaching them.

If you cannot use Elastic Volumes but you need to modify the root (boot) volume, you must stop the instance, modify the volume, and then restart the instance.

After the instance has started, you can check the file system size to see if your instance recognizes the larger volume space. On Linux, use the df -h command to check the file system size.

[ec2-user ~]$ df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/xvda1            7.9G  943M  6.9G  12% /
tmpfs                 1.9G     0  1.9G   0% /dev/shm

If the size does not reflect your newly expanded volume, you must extend the file system of your device so that your instance can use the new space. For more information, see Extend the file system after resizing an Amazon EBS volume.

With Windows instances, you might have to bring the volume online in order to use it. For more information, see Make an Amazon EBS volume available for use. You do not need to reformat the volume.

Initialize Elastic Volumes support (if needed)

Before you can modify a volume that was attached to an instance before November 3, 2016 23:40 UTC, you must initialize volume modification support using one of the following actions:

  • Detach and attach the volume

  • Stop and start the instance

Console
To determine whether your instances are ready

  1. Open the Amazon EC2 console at https://console.amazonaws.cn/ec2/.

  2. On the navigation pane, choose Instances.

  3. Choose the Show/Hide Columns icon (the gear). Select the Launch time attribute column and then choose Confirm.

  4. Sort the list of instances by the Launch Time column. For each instance that was started before the cutoff date, choose the Storage tab and check the Attachment time column to see when its volumes were attached.

Amazon CLI
To determine whether your instances are ready

Use the following describe-instances command to determine whether the volume was attached before November 3, 2016 23:40 UTC.

aws ec2 describe-instances \
    --query "Reservations[*].Instances[*].[InstanceId,LaunchTime<='2016-11-01',BlockDeviceMappings[*][Ebs.AttachTime<='2016-11-01']]" \
    --output text

The first line of the output for each instance shows its ID and whether it was started before the cutoff date (True or False). The first line is followed by one or more lines that show whether each EBS volume was attached before the cutoff date (True or False). In the following example output, you must initialize volume modification for the first instance because it was started before the cutoff date and its root volume was attached before the cutoff date. The other instances are ready because they were started after the cutoff date.

i-e905622e              True
True
i-719f99a8              False
True
i-006b02c1b78381e57     False
False
False
i-e3d172ed              False
True
PowerShell
To determine whether an instance is ready

Use the Get-EC2Instance cmdlet to determine whether a volume was attached before November 3, 2016 23:40 UTC.

(Get-EC2Instance `
    -InstanceId i-1234567890abcdef0).Instances.BlockDeviceMappings | `
     Format-Table @{Name="VolumeId";Expression={$_.Ebs.VolumeId}}, `
                  @{Name="AttachTime";Expression={$_.Ebs.AttachTime}}

The following is example output.

VolumeId              AttachTime
--------              ----------
vol-0b243c8d927752d2b 3/23/2020 12:21:14 AM
vol-043eadbeb4a8387c3 9/5/2020 7:39:22 PM
vol-0c3f0c4e55c082753 4/23/2019 4:07:40 PM