Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Ensuring idempotency

When you perform a mutating operation, you might see an exception because of timeouts or server issues occurring after the resources are mutated. This can make it difficult to determine whether the mutation occurred, and could lead to multiple retries. However, if the original operation and the subsequent retries actually performed the mutations you might have applied stacking changes or created more resources than you intended to. Idempotency ensures that an operation mutates resources no more than one time. With an idempotent request, if the original request mutated successfully, any subsequent retries complete successfully without performing any further mutation.

Idempotency in Amazon ECS

The following API actions optionally support idempotency using a client token. The corresponding Amazon CLI commands also support idempotency using a client token. A client token is a unique, case-sensitive string. To make an idempotent API request using one of these actions, specify a client token in the request. You should not reuse the same client token for other API requests. If you retry a request that completed successfully using the same client token and the same parameters, the retry succeeds without performing any further actions.

Idempotency for RunTask

The RunTask API supports idempotency using a client token. A client token is a unique string that you specify when you make an API request. If you retry an API request with the same client token and the same request parameters after it has completed successfully, the result of the original request is returned. If you retry a successful request using the same client token, but one or more of the parameters are different, other than the Region or Availability Zone, the retry fails with a ConflictException. If you do not specify your own client token, the Amazon SDK and Amazon Command Line Interface automatically generate a client token for the request to ensure that it is idempotent. A client token can be any string that includes up to 64 ASCII characters in the range of 33-126 (inclusive).

The time to live (TTL) for the RunTask client token is 24 hours. You should not reuse the same client token for different requests. The client token maximum TTL is valid for whichever of the following two values is lower:

RunTask retry rules and responses

When you retry a request because you received a 5xx exception, the retried successful response normally includes all of the information that the original request would have returned. Tasks that have been stopped for under an hour only include the task ARN, last status, and desired status.

The following is an example snippet of the response from a retry when there is one running task, one stopped task, and one task that failed to launch.

{
  "failures": [
    {
      "arn": "arn:aws:ecs:us-east-1:123456789012:container/4df26bb4-f057-467b-a079-961675296e64",
      "reason": "RESOURCE:MEMORY"
    }
  ],
  "tasks": [
    {
      "desiredStatus": "RUNNING",
      "taskArn": "arn:aws:ecs:us-east-1:123456789012:task/default/fdf2c302-468c-4e55-b884-5331d816e7fb",
      ...
    },
    {
      "taskArn": "arn:aws:ecs:us-east-1:123456789012:task/default/fdf2c302-468c-4e55-b884-5331d819999",
      "lastStatus": "STOPPED",
      ...
     }
  ]
}

Failures that are over an hour old only include the number of failed tasks.

Examples

Amazon CLI command examples

To make an Amazon CLI command idempotent, add the --client-token option.

Example: create-service

The following create-service command uses idempotency as it includes a client token.

aws ecs create-service \
    --cluster MyCluster \
    --service MyService \
    --task-definition MyTaskDefinition:2 \
    --desired-count 2 \
    --launch-type FARGATE \
    --platform-version LATEST \
    --network-configuration "awsvpcConfiguration={subnets=["subnet-12344321"],securityGroups=["sg-12344321"],assignPublicIp="ENABLED"}" \
    --client-token 550e8400-e29b-41d4-a716-44665544

Example: create-task-set

The following create-task-set command uses idempotency as it includes a client token.

aws ecs create-task-set \
    --cluster MyCluster \
    --service MyService \
    --task-definition MyTaskDefinition:2 \
    --network-configuration "awsvpcConfiguration={subnets=["subnet-12344321"],securityGroups=["sg-12344321"]}" \
    --client-token 550e8400-e29b-41d4-a716-44665544

Example: run-task

The following run-task command uses idempotency as it includes a client token.

aws ecs run-task \
    --cluster MyCluster \
    --task-definition MyTaskDefinition:2 \
    --client-token 550e8400-e29b-41d4-a716-446655440000

API request examples

To make an API request idempotent, add the clientToken parameter.

Example: CreateService

The following CreateService API request uses idempotency as it includes a client token.

POST / HTTP/1.1
Host: ecs.us-east-1.amazonaws.com.cn
Accept-Encoding: identity
Content-Length: 87
X-Amz-Target: AmazonEC2ContainerServiceV20141113.CreateService
X-Amz-Date: 20150429T170125Z
Content-Type: application/x-amz-json-1.1
Authorization: AUTHPARAMS

{
  "serviceName": "MyService",
  "taskDefinition": "MyTaskDefinition:2",
  "desiredCount": 10,
   "capacityProviderStrategy": [ 
      { 
         "base": "number",
         "capacityProvider": "FARGATE",
         "weight": 1
      }
   ],
   "capacityProviderStrategy": [ 
      { 
         "base": "number",
         "capacityProvider": "FARGATE_SPOT",
         "weight": 1
      }
   ],
   "clientToken": "550e8400-e29b-41d4-a716-44665544"
}

Example: CreateTaskSet

The following CreateTaskSet API request uses idempotency as it includes a client token.

POST / HTTP/1.1
Host: ecs.us-east-1.amazonaws.com
Accept-Encoding: identity
Content-Length: 87
X-Amz-Target: AmazonEC2ContainerServiceV20141113.CreateTaskSet
X-Amz-Date: 20150429T170125Z
Content-Type: application/x-amz-json-1.1
Authorization: AUTHPARAMS

{
  "serviceName": "MyService",
  "taskDefinition": "mytask:1",
  "desiredCount": 1,
   "capacityProviderStrategy": [ 
      { 
         "base": "number",
         "capacityProvider": "FARGATE",
         "weight": 1
      }
   ],
   "capacityProviderStrategy": [ 
      { 
         "base": "number",
         "capacityProvider": "FARGATE_SPOT",
         "weight": 1
      }
   ],
    "clientToken": "550e8400-e29b-41d4-a716-44665544" 
}

Example: RunTask

The following RunTask API request uses idempotency as it includes a client token.

POST / HTTP/1.1
Host: ecs.us-east-1.amazonaws.com
Accept-Encoding: identity
Content-Length: 45
X-Amz-Target: AmazonEC2ContainerServiceV20141113.RunTask
X-Amz-Date: 20161121T215740Z
User-Agent: aws-cli/1.11.13 Python/2.7.12 Darwin/16.1.0 botocore/1.4.66
Content-Type: application/x-amz-json-1.1
Authorization: AUTHPARAMS

{
  "count": 1,
  "taskDefinition": "mytask:1",
  "clientToken": "550e8400-e29b-41d4-a716-446655440000" 
}

Retry recommendations for idempotent requests

The following table shows some common responses that you might get for idempotent API requests, and provides retry recommendations.