Adding nodes to an ElastiCache cluster - Amazon ElastiCache
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Adding nodes to an ElastiCache cluster

Adding nodes to a Memcached cluster increases the number of your cluster's partitions. When you change the number of partitions in a cluster some of your key spaces need to be remapped so that they are mapped to the right node. Remapping key spaces temporarily increases the number of cache misses on the cluster. For more information, see Configuring your ElastiCache client for efficient load balancing (Memcached).

To reconfigure your Valkey or Redis OSS (cluster mode enabled) cluster, see Scaling clusters in Valkey or Redis OSS (Cluster Mode Enabled)

You can use the ElastiCache Management Console, the Amazon CLI or ElastiCache API to add nodes to your cluster.

If you want to add a node to a single-node Valkey or Redis OSS (cluster mode disabled) cluster (one without replication enabled), it's a two-step process: first add replication, and then add a replica node.

The following procedure adds replication to a single-node Valkey or Redis OSS that does not have replication enabled. When you add replication, the existing node becomes the primary node in the replication-enabled cluster. After replication is added, you can add up to 5 replica nodes to the cluster.

To add replication to a Valkey or Redis OSS cluster with no shards
  1. Sign in to the Amazon Web Services Management Console and open the ElastiCache console at https://console.amazonaws.cn/elasticache/.

  2. From the navigation pane, choose Valkey clusters or Redis OSS clusters.

    A list of clusters running that engine is displayed.

  3. Choose the name of a cluster, not the box to the left of the cluster's name, that you want to add nodes to.

    The following is true of a Redis OSS cluster that does not have replication enabled:

  4. Choose Add replication.

  5. In Add Replication, enter a description for this replication-enabled cluster.

  6. Choose Add.

    As soon as the cluster's status returns to available you can continue at the next procedure and add replicas to the cluster.

To add nodes to an ElastiCache cluster (console)

The following procedure can be used to add nodes to a cluster.

  1. Sign in to the Amazon Web Services Management Console and open the ElastiCache console at https://console.amazonaws.cn/elasticache/.

  2. In the navigation pane, choose the engine running on the cluster that you want to add nodes to.

    A list of clusters running the chosen engine appears.

  3. From the list of clusters, for the cluster that you want to add a node to, choose its name.

    If your cluster is a Valkey or Redis OSS (cluster mode enabled) cluster, see Scaling clusters in Valkey or Redis OSS (Cluster Mode Enabled).

    If your cluster is a Valkey or Redis OSS (cluster mode disabled) cluster with zero shards, first complete the steps at To add replication to a Valkey or Redis OSS cluster with no shards.

  4. Choose Add node.

  5. Complete the information requested in the Add Node dialog box.

  6. Choose the Apply Immediately - Yes button to add this node immediately, or choose No to add this node during the cluster's next maintenance window.

    Impact of New Add and Remove Requests on Pending Requests
    Scenarios Pending Operation New Request Results

    Scenario 1

    Delete

    Delete

    The new delete request, pending or immediate, replaces the pending delete request.

    For example, if nodes 0001, 0003, and 0007 are pending deletion and a new request to delete nodes 0002 and 0004 is issued, only nodes 0002 and 0004 will be deleted. Nodes 0001, 0003, and 0007 will not be deleted.

    Scenario 2

    Delete

    Create

    The new create request, pending or immediate, replaces the pending delete request.

    For example, if nodes 0001, 0003, and 0007 are pending deletion and a new request to create a node is issued, a new node will be created and nodes 0001, 0003, and 0007 will not be deleted.

    Scenario 3

    Create

    Delete

    The new delete request, pending or immediate, replaces the pending create request.

    For example, if there is a pending request to create two nodes and a new request is issued to delete node 0003, no new nodes will be created and node 0003 will be deleted.

    Scenario 4

    Create

    Create

    The new create request is added to the pending create request.

    For example, if there is a pending request to create two nodes and a new request is issued to create three nodes, the new requests is added to the pending request and five nodes will be created.

    Important

    If the new create request is set to Apply Immediately - Yes, all create requests are performed immediately. If the new create request is set to Apply Immediately - No, all create requests are pending.

    To determine what operations are pending, choose the Description tab and check to see how many pending creations or deletions are shown. You cannot have both pending creations and pending deletions.

  7. Choose the Add button.

    After a few moments, the new nodes should appear in the nodes list with a status of creating. If they don't appear, refresh your browser page. When the node's status changes to available the new node is able to be used.

To add nodes to a cluster using the Amazon CLI, use the Amazon CLI operation modify-cache-cluster with the following parameters:

  • --cache-cluster-id The ID of the cache cluster that you want to add nodes to.

  • --num-cache-nodes The --num-cache-nodes parameter specifies the number of nodes that you want in this cluster after the modification is applied. To add nodes to this cluster, --num-cache-nodes must be greater than the current number of nodes in this cluster. If this value is less than the current number of nodes, ElastiCache expects the parameter cache-node-ids-to-remove and a list of nodes to remove from the cluster. For more information, see Using the Amazon CLI with ElastiCache.

  • --apply-immediately or --no-apply-immediately which specifies whether to add these nodes immediately or at the next maintenance window.

For Linux, OS X, or Unix:

aws elasticache modify-cache-cluster \ --cache-cluster-id my-cluster \ --num-cache-nodes 5 \ --apply-immediately

For Windows:

aws elasticache modify-cache-cluster ^ --cache-cluster-id my-cluster ^ --num-cache-nodes 5 ^ --apply-immediately

This operation produces output similar to the following (JSON format):

{ "CacheCluster": { "Engine": "memcached", "CacheParameterGroup": { "CacheNodeIdsToReboot": [], "CacheParameterGroupName": "default.memcached1.4", "ParameterApplyStatus": "in-sync" }, "CacheClusterId": "my-cluster", "PreferredAvailabilityZone": "us-west-2b", "ConfigurationEndpoint": { "Port": 11211, "Address": "rlh-mem000.7alc7bf-example.cfg.usw2.cache.amazonaws.com" }, "CacheSecurityGroups": [], "CacheClusterCreateTime": "2016-09-21T16:28:28.973Z", "AutoMinorVersionUpgrade": true, "CacheClusterStatus": "modifying", "NumCacheNodes": 2, "ClientDownloadLandingPage": "https://console.aws.amazon.com/elasticache/home#client-download:", "SecurityGroups": [ { "Status": "active", "SecurityGroupId": "sg-dbe93fa2" } ], "CacheSubnetGroupName": "default", "EngineVersion": "1.4.24", "PendingModifiedValues": { "NumCacheNodes": 5 }, "PreferredMaintenanceWindow": "sat:09:00-sat:10:00", "CacheNodeType": "cache.m3.medium", "DataTiering": "disabled", } }

For more information, see the Amazon CLI topic modify-cache-cluster.

If you want to add nodes to an existing Valkey or Redis OSS (cluster mode disabled) cluster that does not have replication enabled, you must first create the replication group specifying the existing cluster as the primary. For more information, see Creating a replication group using an available Valkey or Redis OSS cache cluster (Amazon CLI). After the replication group is available, you can continue with the following process.

To add nodes to a cluster using the Amazon CLI, use the Amazon CLI operation increase-replica-count with the following parameters:

  • --replication-group-id The ID of the replicationn group that you want to add nodes to.

  • --new-replica-count specifies the number of nodes that you want in this replication group after the modification is applied. To add nodes to this cluster, --new-replica-count must be greater than the current number of nodes in this cluster.

  • --apply-immediately or --no-apply-immediately which specifies whether to add these nodes immediately or at the next maintenance window.

For Linux, OS X, or Unix:

aws elasticache increase-replica-count \ --replication-group-id my-replication-group \ --new-replica-count 4 \ --apply-immediately

For Windows:

aws elasticache increase-replica-count ^ --replication-group-id my-replication-group ^ --new-replica-count 4 ^ --apply-immediately

This operation produces output similar to the following (JSON format):

{ "ReplicationGroup": { "ReplicationGroupId": "node-test", "Description": "node-test", "Status": "modifying", "PendingModifiedValues": {}, "MemberClusters": [ "node-test-001", "node-test-002", "node-test-003", "node-test-004", "node-test-005" ], "NodeGroups": [ { "NodeGroupId": "0001", "Status": "modifying", "PrimaryEndpoint": { "Address": "node-test.zzzzzz.ng.0001.usw2.cache.amazonaws.com", "Port": 6379 }, "ReaderEndpoint": { "Address": "node-test.zzzzzz.ng.0001.usw2.cache.amazonaws.com", "Port": 6379 }, "NodeGroupMembers": [ { "CacheClusterId": "node-test-001", "CacheNodeId": "0001", "ReadEndpoint": { "Address": "node-test-001.zzzzzz.0001.usw2.cache.amazonaws.com", "Port": 6379 }, "PreferredAvailabilityZone": "us-west-2a", "CurrentRole": "primary" }, { "CacheClusterId": "node-test-002", "CacheNodeId": "0001", "ReadEndpoint": { "Address": "node-test-002.zzzzzz.0001.usw2.cache.amazonaws.com", "Port": 6379 }, "PreferredAvailabilityZone": "us-west-2c", "CurrentRole": "replica" }, { "CacheClusterId": "node-test-003", "CacheNodeId": "0001", "ReadEndpoint": { "Address": "node-test-003.zzzzzz.0001.usw2.cache.amazonaws.com", "Port": 6379 }, "PreferredAvailabilityZone": "us-west-2b", "CurrentRole": "replica" } ] } ], "SnapshottingClusterId": "node-test-002", "AutomaticFailover": "enabled", "MultiAZ": "enabled", "SnapshotRetentionLimit": 1, "SnapshotWindow": "07:30-08:30", "ClusterEnabled": false, "CacheNodeType": "cache.r5.large", "DataTiering": "disabled", "TransitEncryptionEnabled": false, "AtRestEncryptionEnabled": false, "ARN": "arn:aws:elasticache:us-west-2:123456789012:replicationgroup:node-test" } }

For more information, see the Amazon CLI topic increase-replica-count.

If you want to add nodes to an existing Valkey or Redis OSS (cluster mode disabled) cluster that does not have replication enabled, you must first create the replication group specifying the existing cluster as the Primary. For more information, see Adding replicas to a standalone Valkey or Redis OSS (Cluster Mode Disabled) cluster (ElastiCache API). After the replication group is available, you can continue with the following process.

To add nodes to a cluster (ElastiCache API)
  • Call the IncreaseReplicaCount API operation with the following parameters:

    • ReplicationGroupId The ID of the cluster that you want to add nodes to.

    • NewReplicaCount The NewReplicaCount parameter specifies the number of nodes that you want in this cluster after the modification is applied. To add nodes to this cluster, NewReplicaCount must be greater than the current number of nodes in this cluster. If this value is less than the current number of nodes, use the DecreaseReplicaCount API with the number of nodes to remove from the cluster.

    • ApplyImmediately Specifies whether to add these nodes immediately or at the next maintenance window.

    • Region Specifies the Amazon Region of the cluster that you want to add nodes to.

    The following example shows a call to add nodes to a cluster.

    https://elasticache.us-west-2.amazonaws.com/ ?Action=IncreaseReplicaCount &ApplyImmediately=true &NumCacheNodes=4 &ReplicationGroupId=my-replication-group &Region=us-east-2 &Version=2014-12-01 &SignatureVersion=4 &SignatureMethod=HmacSHA256 &Timestamp=20141201T220302Z &X-Amz-Algorithm=&AWS;4-HMAC-SHA256 &X-Amz-Date=20141201T220302Z &X-Amz-SignedHeaders=Host &X-Amz-Expires=20141201T220302Z &X-Amz-Credential=<credential> &X-Amz-Signature=<signature>

For more information, see ElastiCache API topic IncreaseReplicaCount.

To add nodes to a cluster (ElastiCache API)
  • Call the ModifyCacheCluster API operation with the following parameters:

    • CacheClusterId The ID of the cluster that you want to add nodes to.

    • NumCacheNodes The NumCachNodes parameter specifies the number of nodes that you want in this cluster after the modification is applied. To add nodes to this cluster, NumCacheNodes must be greater than the current number of nodes in this cluster. If this value is less than the current number of nodes, ElastiCache expects the parameter CacheNodeIdsToRemove with a list of nodes to remove from the cluster (see Using the ElastiCache API with Memcached).

    • ApplyImmediately Specifies whether to add these nodes immediately or at the next maintenance window.

    • Region Specifies the Amazon Region of the cluster that you want to add nodes to.

    The following example shows a call to add nodes to a cluster.

    https://elasticache.us-west-2.amazonaws.com/ ?Action=ModifyCacheCluster &ApplyImmediately=true &NumCacheNodes=5 &CacheClusterId=my-cluster &Region=us-east-2 &Version=2014-12-01 &SignatureVersion=4 &SignatureMethod=HmacSHA256 &Timestamp=20141201T220302Z &X-Amz-Algorithm=&AWS;4-HMAC-SHA256 &X-Amz-Date=20141201T220302Z &X-Amz-SignedHeaders=Host &X-Amz-Expires=20141201T220302Z &X-Amz-Credential=<credential> &X-Amz-Signature=<signature>

For more information, see ElastiCache API topic ModifyCacheCluster.