Creating and connecting to an ActiveMQ broker

1. Sign in to the Amazon MQ console.

2. On the Select broker engine page, choose Apache ActiveMQ.

3. On the Select deployment and storage page, in the Deployment mode and storage type section, do the following:

   1. Choose the Deployment mode (for example, Active/standby broker). For more information, see Broker Architecture.

      • A Single-instance broker is comprised of one broker in one Availability Zone. The broker communicates with your application and with an Amazon EBS or Amazon EFS storage volume. For more information, see Amazon MQ single-instance broker.

      • An Active/standby broker for high availability is comprised of two brokers in two different Availability Zones, configured in a redundant pair. These brokers communicate synchronously with your application, and with Amazon EFS. For more information, see Amazon MQ active/standby broker for high availability.

      • For more information on the sample blueprints for a network of brokers, see Sample blueprints.

   2. Choose the Storage type (for example, EBS). For more information, see Storage.

      Note

      Amazon EBS replicates data within a single Availability Zone and doesn't support the ActiveMQ active/standby deployment mode.

   3. Choose Next.

4. On the Configure settings page, in the Details section, do the following:

   1. Enter the Broker name.

      Important

      Do not add personally identifiable information (PII) or other confidential or sensitive information in broker names. Broker names are accessible to other Amazon services, including CloudWatch Logs. Broker names are not intended to be used for private or sensitive data.

   2. Choose the Broker instance type (for example, mq.m5.large). For more information, see Broker instance types.

5. In the ActiveMQ Web Console access section, provide a Username and Password. The following restrictions apply to broker usernames and passwords:

   • Your username can contain only alphanumeric characters, dashes, periods, underscores, and tildas (- . _ ~).

   • Your password must be at least 12 characters long, contain at least 4 unique characters and must not contain commas, colons, or equal signs (,:=).

   Important

   Do not add personally identifiable information (PII) or other confidential or sensitive information in broker usernames. Broker usernames are accessible to other Amazon services, including CloudWatch Logs. Broker usernames are not intended to be used for private or sensitive data.

6. Choose Deploy.

   While Amazon MQ creates your broker, it displays the Creation in progress status.

   Creating the broker takes about 15 minutes.

   When your broker is created successfully, Amazon MQ displays the Running status.

   

7. Choose MyBroker.

   On the MyBroker page, in the Connect section, note your broker's ActiveMQ web console URL, for example:

   https://b-1234a5b6-78cd-901e-2fgh-3i45j6k178l9-1.mq.us-east-2.amazonaws.com:8162

   Also, note your broker's wire-level protocol Endpoints. The following is an example of an OpenWire endpoint:

   ssl://b-1234a5b6-78cd-901e-2fgh-3i45j6k178l9-1.mq.us-east-2.amazonaws.com:61617

1. Sign in to the Amazon MQ console.

2. From the broker list, choose the name of your broker (for example, MyBroker).

3. On the MyBroker page, in the Connections section, note the addresses and ports of the broker's web console URL and wire-level protocols.

4. In the Details section, under Security and network, choose the name of your security group or .

   The Security Groups page of the EC2 Dashboard is displayed.

5. From the security group list, choose your security group.

6. At the bottom of the page, choose Inbound, and then choose Edit.

7. In the Edit inbound rules dialog box, add a rule for every URL or endpoint that you want to be publicly accessible (the following example shows how to do this for a broker web console).

   1. Choose Add Rule.

   2. For Type, select Custom TCP.

   3. For Port Range, type the web console port (8162).

   4. For Source, leave Custom selected and then type the IP address of the system that you want to be able to access the web console (for example, 192.0.2.1).

   5. Choose Save.

      Your broker can now accept inbound connections.

1. Create a JMS pooled connection factory for the message producer using your broker's endpoint and then call the createConnection method against the factory.

   Note

   For an active/standby broker, Amazon MQ provides two ActiveMQ Web Console URLs, but only one URL is active at a time. Likewise, Amazon MQ provides two endpoints for each wire-level protocol, but only one endpoint is active in each pair at a time. The -1 and -2 suffixes denote a redundant pair. For more information, see Broker Architecture).

   For wire-level protocol endpoints, you can allow your application to connect to either endpoint by using the Failover Transport.

   // Create a connection factory.
   final ActiveMQConnectionFactory connectionFactory = new ActiveMQConnectionFactory(wireLevelEndpoint);
   
   // Pass the sign-in credentials.
   connectionFactory.setUserName(activeMqUsername);
   connectionFactory.setPassword(activeMqPassword);
   
   // Create a pooled connection factory.
   final PooledConnectionFactory pooledConnectionFactory = new PooledConnectionFactory();
   pooledConnectionFactory.setConnectionFactory(connectionFactory);
   pooledConnectionFactory.setMaxConnections(10);
   
   // Establish a connection for the producer.
   final Connection producerConnection = pooledConnectionFactory.createConnection();
   producerConnection.start(); 
   
   // Close all connections in the pool.
   pooledConnectionFactory.clear();

   Note

   Message producers should always use the PooledConnectionFactory class. For more information, see Always Use Connection Pooling.

2. Create a session, a queue named MyQueue, and a message producer.

   // Create a session.
   final Session producerSession = producerConnection.createSession(false, Session.AUTO_ACKNOWLEDGE);
   
   // Create a queue named "MyQueue".
   final Destination producerDestination = producerSession.createQueue("MyQueue");
   
   // Create a producer from the session to the queue.
   final MessageProducer producer = producerSession.createProducer(producerDestination);
   producer.setDeliveryMode(DeliveryMode.NON_PERSISTENT);

3. Create the message string "Hello from Amazon MQ!" and then send the message.

   // Create a message.
   final String text = "Hello from Amazon MQ!";
   TextMessage producerMessage = producerSession.createTextMessage(text);
   
   // Send the message.
   producer.send(producerMessage);
   System.out.println("Message sent.");

4. Clean up the producer.

   producer.close();
   producerSession.close();
   producerConnection.close();

1. Create a JMS connection factory for the message producer using your broker's endpoint and then call the createConnection method against the factory.

   // Create a connection factory.
   final ActiveMQConnectionFactory connectionFactory = new ActiveMQConnectionFactory(wireLevelEndpoint);
   
   // Pass the sign-in credentials.
   connectionFactory.setUserName(activeMqUsername);
   connectionFactory.setPassword(activeMqPassword);
   
   // Establish a connection for the consumer.
   final Connection consumerConnection = connectionFactory.createConnection();
   consumerConnection.start();

   Note

   Message consumers should never use the PooledConnectionFactory class. For more information, see Always Use Connection Pooling.

2. Create a session, a queue named MyQueue, and a message consumer.

   // Create a session.
   final Session consumerSession = consumerConnection.createSession(false, Session.AUTO_ACKNOWLEDGE);
   
   // Create a queue named "MyQueue".
   final Destination consumerDestination = consumerSession.createQueue("MyQueue");
   
   // Create a message consumer from the session to the queue.
   final MessageConsumer consumer = consumerSession.createConsumer(consumerDestination);

3. Begin to wait for messages and receive the message when it arrives.

   // Begin to wait for messages.
   final Message consumerMessage = consumer.receive(1000);
   
   // Receive the message when it arrives.
   final TextMessage consumerTextMessage = (TextMessage) consumerMessage;
   System.out.println("Message received: " + consumerTextMessage.getText());

   Note

   Unlike Amazon messaging services (such as Amazon SQS), the consumer is constantly connected to the broker.

4. Close the consumer, session, and connection.

   consumer.close();
   consumerSession.close();
   consumerConnection.close();
   

To connect your broker to a Lambda function

1. Add the following IAM role permissions to your Lambda function execution role.

   • mq:DescribeBroker

   • ec2:CreateNetworkInterface

   • ec2:DeleteNetworkInterface

   • ec2:DescribeNetworkInterfaces

   • ec2:DescribeSecurityGroups

   • ec2:DescribeSubnets

   • ec2:DescribeVpcs

   • logs:CreateLogGroup

   • logs:CreateLogStream

   • logs:PutLogEvents

   • secretsmanager:GetSecretValue

   Note

   Without the necessary IAM permissions, your function will not be able to successfully read records from Amazon MQ resources.

2. (Optional) If you have created a broker without public accessibility, you must do one of the following to allow Lambda to connect to your broker:

   • Configure one NAT gateway per public subnet. For more information, see Internet and service access for VPC-connected functions in the Amazon Lambda Developer Guide.

   • Create a connection between your Amazon Virtual Private Cloud (Amazon VPC) and Lambda using a VPC endpoint. Your Amazon VPC must also connect to Amazon Security Token Service (Amazon STS) and Secrets Manager endpoints. For more information, see Configuring interface VPC endpoints for Lambda in the Amazon Lambda Developer Guide.

3. Configure your broker as an event source for a Lambda function using the Amazon Web Services Management Console. You can also use the create-event-source-mapping Amazon Command Line Interface command.

4. Write some code for your Lambda function to process the messages consumed from your broker. The Lambda payload that retrieved by your event source mapping depends on the engine type of the broker. The following is an example of a Lambda payload for an Amazon MQ for ActiveMQ queue.

   Note

   In the example, testQueue is the name of the queue.

   {
     "eventSource": "aws:amq",
     "eventSourceArn": "arn:aws:mq:us-west-2:112556298976:broker:test:b-9bcfa592-423a-4942-879d-eb284b418fc8",
     "messages": {
       [
         {
           "messageID": "ID:b-9bcfa592-423a-4942-879d-eb284b418fc8-1.mq.us-west-2.amazonaws.com-37557-1234520418293-4:1:1:1:1",
           "messageType": "jms/text-message",
           "data": "QUJDOkFBQUE=",
           "connectionId": "myJMSCoID",
           "redelivered": false,
           "destination": {
             "physicalname": "testQueue" 
           }, 
           "timestamp": 1598827811958,
           "brokerInTime": 1598827811958,
           "brokerOutTime": 1598827811959
         },
         {
           "messageID": "ID:b-9bcfa592-423a-4942-879d-eb284b418fc8-1.mq.us-west-2.amazonaws.com-37557-1234520418293-4:1:1:1:1",
           "messageType":"jms/bytes-message",
           "data": "3DTOOW7crj51prgVLQaGQ82S48k=",
           "connectionId": "myJMSCoID1",
           "persistent": false,
           "destination": {
             "physicalname": "testQueue" 
           }, 
           "timestamp": 1598827811958,
           "brokerInTime": 1598827811958,
           "brokerOutTime": 1598827811959
         }
       ]
     }
   }

1. Sign in to the Amazon MQ console.

2. From the broker list, select your broker (for example, MyBroker) and then choose Delete.

3. In the Delete MyBroker? dialog box, type delete and then choose Delete.

   Deleting a broker takes about 5 minutes.