Installing, updating, and uninstalling the Amazon CLI version 1 on Linux - Amazon Command Line Interface
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

This documentation is for Version 1 of the Amazon CLI only. For documentation related to Version 2 of the Amazon CLI, see the Version 2 User Guide.

Installing, updating, and uninstalling the Amazon CLI version 1 on Linux

You can install the Amazon Command Line Interface (Amazon CLI) version 1 and its dependencies on most Linux distributions by using the pip package manager or the bundled installer.

Although the awscli package is available in repositories for other package managers such as apt and yum, these are not produced, managed, or supported by Amazon. We recommend that you install the Amazon CLI from only the official Amazon distribution points, as documented in this guide.

Prerequisites

You must have Python 3.8 or later installed. For installation instructions, see the Downloading Python page in Python's Beginner Guide.

Python version support matrix

Amazon CLI version Supported Python version
1.32.0 – current Python 3.8+
1.27.0 – 1.31.x Python 3.7+
1.20.0 – 1.26.x Python 3.6+
1.19.0 – 1.19.x Python 2.7+, Python 3.6+
1.17 – 1.18.x Python 2.7+, Python 3.4+
1.0 – 1.16.x Python 2.6 and older, Python 3.3 and older

Install and uninstall the Amazon CLI version 1 on Linux using the bundled installer

On Linux or macOS, you can use the bundled installer to install version 1 of the Amazon CLI. The bundled installer includes all dependencies and can be used offline.

Note

The bundled installer doesn't support installing to paths that contain spaces.

Install the Amazon CLI version 1 using the bundled installer with sudo

The following steps enable you to install the Amazon CLI version 1 from the command line on any build of Linux or macOS.

The following is a summary of the installation commands explained below that you can cut and paste to run as a single set of commands.

For the latest version of the Amazon CLI, use the following command block:

$ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle.zip" -o "awscli-bundle.zip" unzip awscli-bundle.zip sudo ./awscli-bundle/install -i /usr/local/aws -b /usr/local/bin/aws

For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 1.16.312 would be awscli-bundle-1.16.312.zip resulting in the following command:

$ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle-1.16.312.zip" -o "awscli-bundle.zip" unzip awscli-bundle.zip sudo ./awscli-bundle/install -i /usr/local/aws -b /usr/local/bin/aws

Follow these steps from the command line to install the Amazon CLI version 1 using the bundled installer.

To install the Amazon CLI version 1 using the bundled installer
  1. Download the Amazon CLI version 1 bundled installer using one of the the following methods.

    • Download using the curl command.

      For the latest version of the Amazon CLI, use the following command block:

      $ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle.zip" -o "awscli-bundle.zip"

      For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 1.16.312 would be awscli-bundle-1.16.312.zip resulting in the following command:

      $ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle-1.16.312.zip" -o "awscli-bundle.zip"
    • Download using the direct link.

      For the latest version of the Amazon CLI: https://s3.amazonaws.com/aws-cli/awscli-bundle.zip

      For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 1.16.312 would be awscli-bundle-1.16.312.zip resulting in the following url https://s3.amazonaws.com/aws-cli/awscli-bundle-1.16.312.zip

  2. Extract the files from the package. If you don't have unzip to extract the files, use your Linux distribution's built-in package manager to install it.

    $ unzip awscli-bundle.zip
  3. Run the install program. The installer installs the Amazon CLI at /usr/local/aws and creates the symlink aws at the /usr/local/bin directory. Using the -b option to create a symlink eliminates the need to specify the install directory in the user's $PATH variable. This should enable all users to call the Amazon CLI by entering aws from any directory.

    $ sudo ./awscli-bundle/install -i /usr/local/aws -b /usr/local/bin/aws

    By default, the install script runs under the system default version of Python. If you have installed an alternative version of Python and want to use that version to install the Amazon CLI, run the install script with that version by absolute path to the Python executable, as follows.

    $ sudo /usr/local/bin/python3.7 awscli-bundle/install -i /usr/local/aws -b /usr/local/bin/aws
  4. Verify that the Amazon CLI installed correctly.

    $ aws --version aws-cli/1.35.20 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/1.18.6

    If you get an error, see Troubleshooting errors for the Amazon CLI.

Install the Amazon CLI version 1 using the bundled installer without sudo

If you don't have sudo permissions or want to install the Amazon CLI only for the current user, you can use a modified version of the previous commands. The first two commands are the same.

For the latest version of the Amazon CLI, use the following command block:

$ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle.zip" -o "awscli-bundle.zip" unzip awscli-bundle.zip ./awscli-bundle/install -b ~/bin/aws

For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 1.16.312 would be awscli-bundle-1.16.312.zip resulting in the following command:

$ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle-1.16.312.zip" -o "awscli-bundle.zip" unzip awscli-bundle.zip ./awscli-bundle/install -b ~/bin/aws
To install the Amazon CLI version 1 for current user
  1. Download the Amazon CLI version 1 bundled installer in one of the following ways.

    • Download using the curl command.

      For the latest version of the Amazon CLI, use the following command block:

      $ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle.zip" -o "awscli-bundle.zip"

      For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 1.16.312 would be awscli-bundle-1.16.312.zip resulting in the following command:

      $ curl "https://s3.amazonaws.com/aws-cli/awscli-bundle-1.16.312.zip" -o "awscli-bundle.zip"
    • Download using the direct link.

      For the latest version of the Amazon CLI: https://s3.amazonaws.com/aws-cli/awscli-bundle.zip

      For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 1.16.312 would be awscli-bundle-1.16.312.zip resulting in the following url https://s3.amazonaws.com/aws-cli/awscli-bundle-1.16.312.zip

  2. Extract the files from the package by using unzip. If you don't have unzip, use your Linux distribution's built-in package manager to install it.

    $ unzip awscli-bundle.zip
  3. Run the install program. The installer installs the Amazon CLI at /usr/local/aws and creates the symlink aws at the /usr/local/bin directory. The command uses the -b parameter to specify the directory where the installer places the aws symlink file. You must have write permissions to the specified folder.

    $ ./awscli-bundle/install -b ~/bin/aws

    This installs the Amazon CLI to the default location (~/.local/lib/aws) and creates a symbolic link (symlink) at ~/bin/aws. Make sure that ~/bin is in your PATH environment variable for the symlink to work.

    $ echo $PATH | grep ~/bin // See if $PATH contains ~/bin (output will be empty if it doesn't) $ export PATH=~/bin:$PATH // Add ~/bin to $PATH if necessary
  4. Ensure the directory that the Amazon CLI version 1 is part of your PATH variable.

    1. Find your shell's profile script in your user folder. If you're not sure which shell you have, run echo $SHELL.

      $ ls -a ~ . .. .bash_logout .bash_profile .bashrc Desktop Documents Downloads
      • Bash.bash_profile, .profile, or .bash_login

      • Zsh.zshrc

      • Tcsh.tcshrc, .cshrc or .login

    2. Add an export command at the end of your profile script that's similar to the following example.

      export PATH=~/.local/bin:$PATH

      This command inserts the path, ~/.local/bin in this example, at the front of the existing PATH variable.

    3. Reload the profile into your current session to put those changes into effect.

      $ source ~/.bash_profile
  5. Verify that the Amazon CLI installed correctly.

    $ aws --version aws-cli/1.35.20 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/1.18.6

    If you get an error, see Troubleshooting errors for the Amazon CLI.

Uninstall the Amazon CLI version 1 bundled installer

  1. If you installed the Amazon CLI using the bundled installer, follow these instructions. The bundled installer doesn't put anything outside of the installation directory except the optional symlink, so uninstalling is as simple as deleting those two items.

    $ sudo rm -rf /usr/local/aws $ sudo rm -rf /usr/local/bin/aws
  2. (Optional) Remove the shared Amazon SDK and Amazon CLI settings information in the .aws folder.

    Warning

    These configuration and credentials settings are shared across all Amazon SDKs and the Amazon CLI. If you remove this folder, they cannot be accessed by any Amazon SDKs that are still on your system.

    The default location of the .aws folder differs between platforms, by default the folder is located in ~/.aws/. If your user has write permission to this directory, you don't need to use sudo.

    $ sudo rm -r ~/.aws/

Install and uninstall the Amazon CLI version 1 using pip

Install pip

If you don't already have pip installed, you can install it by using the script that the Python Packaging Authority provides. Run pip --version to see if your version of Linux already includes Python and pip. We recommend that if you have Python version 3 or later installed, you use the pip3 command.

  1. Use the curl command to download the installation script. The following command uses the -O (uppercase "O")parameter to specify that the downloaded file is to be stored in the current directory using the same name it has on the remote host.

    $ curl -O https://bootstrap.pypa.io/get-pip.py
  2. Run the script with the python or python3 command to download and install the latest version of pip and other required support packages. When you include the --user switch, the script installs pip to the path ~/.local/bin.

    $ python3 get-pip.py --user
  3. Ensure the directory that contains pip is part of your PATH variable.

    1. Find your shell's profile script in your user folder. If you're not sure which shell you have, run echo $SHELL.

      $ ls -a ~ . .. .bash_logout .bash_profile .bashrc Desktop Documents Downloads
      • Bash.bash_profile, .profile, or .bash_login

      • Zsh.zshrc

      • Tcsh.tcshrc, .cshrc or .login

    2. Add an export command at the end of your profile script that's similar to the following example.

      export PATH=~/.local/bin:$PATH

      This command inserts the path, ~/.local/bin in this example, at the front of the existing PATH variable.

    3. Reload the profile into your current session to put those changes into effect.

      $ source ~/.bash_profile
  4. To verify that pip or pip3 is installed correctly, run the following command.

    $ pip3 --version pip 24.0 from ~/.local/lib/python3.7/site-packages (python 3.7)

Install and update the Amazon CLI version 1 using pip

  1. Use the pip or pip3 command to install or update the Amazon CLI. We recommend that if you use Python version 3 or later that you use the pip3 command. The --user switch, pip installs the Amazon CLI to ~/.local/bin.

    For the latest version of the Amazon CLI, use the following command block:

    $ pip3 install awscli --upgrade --user

    For a specific version of the Amazon CLI, append two equals signs = and the version number to the filename. For this example the filename for version 1.16.312 would be ==1.16.312 resulting in the following command:

    $ pip3 install awscli==1.16.312 --upgrade --user
    Note

    Use appropriate quoting rules for your terminal. In order to use the = character, you might need to use single or double quotes to escape properly. The following example escapes using single quotes:

    $ pip3 install 'awscli==1.16.312' --upgrade --user
  2. Verify that the Amazon CLI installed correctly.

    $ aws --version aws-cli/1.35.20 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/1.18.6

    If you get an error, see Troubleshooting errors for the Amazon CLI.

Uninstall the Amazon CLI using pip

  1. If you installed the Amazon CLI version 1 using pip, you must also uninstall using pip.

    $ pip uninstall awscli

    If you are using version Python 2 or 3, you might need to use the pip2 or pip3 command. Use the aws --version command to determine the Python version associated with your installed Amazon CLI version 1.

    $ pip3 uninstall awscli

    You might need to restart your command prompt window or your computer to remove all files.

  2. (Optional) Remove the shared Amazon SDK and Amazon CLI settings information in the .aws folder.

    Warning

    These configuration and credentials settings are shared across all Amazon SDKs and the Amazon CLI. If you remove this folder, they cannot be accessed by any Amazon SDKs that are still on your system.

    The default location of the .aws folder differs between platforms, by default the folder is located in ~/.aws/. If your user has write permission to this directory, you don't need to use sudo.

    $ sudo rm -r ~/.aws/

Install and uninstall the Amazon CLI version 1 using Snapcraft

Install snap

If you don't already have snap installed, you can install it by using the instructions Canonical Snapcraft provides. Run snap version to see if your version of Linux already includes snap.

  1. Install Snapcraft on your platform. For information on installing Snapcraft, see Installing the daemon in the Snap documentation.

  2. Restart your system so that your PATH variables are updated correctly. If you are having installation issues, follow steps in Fix common issues in the Snap documentation.

  3. To verify that snap is installed correctly, run the following command.

    $ snap version

Install and update the Amazon CLI version 1 using snap

  1. Run the following snap install command for the Amazon CLI version 1.

    $ snap install aws-cli --channel=v1/stable --classic

    Depending on your permissions, you may need to add sudo to your command.

    $ sudo snap install aws-cli --channel=v1/stable --classic
  2. Verify that the Amazon CLI installed correctly.

    $ aws --version aws-cli/1.35.20 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/1.18.6

    If you get an error, see Troubleshooting errors for the Amazon CLI.

Uninstall the Amazon CLI using snap

  1. If you installed the Amazon CLI version 1 using snap, you must also uninstall using snap.

    $ snap remove aws-cli

    You might need to restart your command prompt window or your computer to remove all files.

  2. (Optional) Remove the shared Amazon SDK and Amazon CLI settings information in the .aws folder.

    Warning

    These configuration and credentials settings are shared across all Amazon SDKs and the Amazon CLI. If you remove this folder, they cannot be accessed by any Amazon SDKs that are still on your system.

    The default location of the .aws folder differs between platforms, by default the folder is located in ~/.aws/. If you have write permissions to this directory, you don't need to use sudo.

    $ sudo rm -r ~/.aws/

Add the Amazon CLI version 1 executable to your command line path

After installing with pip or snap, you might need to add the aws executable to your operating system' PATH environment variable.

You can verify which folder pip installed the Amazon CLI in by running the following command.

$ which aws /home/username/.local/bin/aws

You can reference this as ~/.local/bin/ because /home/username corresponds to ~ in Linux.

If you omitted the --user switch and so didn't install in user mode, the executable might be in the bin folder of your Python installation. If you don't know where Python is installed, run this command.

$ which python /usr/local/bin/python

The output might be the path to a symlink, not to the actual executable. Run ls -al to see where it points.

$ ls -al /usr/local/bin/python /usr/local/bin/python -> ~/.local/Python/3.6/bin/python3.6

pip installs programs in the same folder that contains the Python application. Add this folder to your PATH variable.

To modify your PATH variable
  1. Find your shell's profile script in your user directory. If you're not sure which shell you have, run echo $SHELL.

    $ ls -a ~ . .. .bash_logout .bash_profile .bashrc Desktop Documents Downloads
    • Bash.bash_profile, .profile, or .bash_login

    • Zsh.zshrc

    • Tcsh.tcshrc, .cshrc, or .login

  2. Add an export command to your profile script.

    export PATH=~/.local/bin:$PATH

    This command adds a path, ~/.local/bin in this example, to the current PATH variable.

  3. Load the updated profile into your current session.

    $ source ~/.bash_profile

Troubleshooting Amazon CLI install and uninstall errors

If you come across issues after installing or uninstalling the Amazon CLI, see Troubleshooting errors for the Amazon CLI for troubleshooting steps. For the most relevant troubleshooting steps, see Command not found errors, The "aws --version" command returns a different version than you installed, and The "aws --version" command returns a version after uninstalling the Amazon CLI.