Amazon Direct Connect quotas - Amazon Direct Connect
BGP quotasLoad balance considerations
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Amazon Direct Connect quotas

The following table lists the quotas related to Amazon Direct Connect.

Component Quota Comments

Private or public virtual interfaces per Amazon Direct Connect dedicated connection

50

This limit cannot be increased.
Transit virtual interfaces per Amazon Direct Connect dedicated connection

4

 This limit cannot be increased.
Private or public virtual interfaces per Amazon Direct Connect dedicated connection and transit virtual interfaces per Amazon Direct Connect dedicated connection 51 When Amazon Direct Connect support for Amazon VPC Transit Gateways was launched, a quota of one (1) transit virtual interface was added to the quota of 50 private or public virtual interfaces per dedicated connection. The number of transit virtual interfaces allowed is now four (4) and is counted against the maximum of 51 virtual interfaces per dedicated connection. This limit cannot be increased.
Private, public, or transit virtual interfaces per Amazon Direct Connect hosted connection 1 This limit cannot be increased.

Active Amazon Direct Connect connections per Direct Connect location per Region per account

 10 Contact your Solutions Architect (SA) or Technical Account Manager (TAM) for further assistance.
Number of virtual interfaces per Link Aggregation Group (LAG) 51 When Amazon Direct Connect support for Amazon VPC Transit Gateways was launched, a quota of one (1) transit virtual interface was added to the quota of 50 private or public virtual interfaces per LAG. The number of transit virtual interfaces allowed is now four (4) and is counted against the maximum of 51 virtual interfaces per LAG. This limit cannot be increased.

Routes per Border Gateway Protocol (BGP) session on a private virtual interface or transit virtual interface from on-premises to Amazon.

If you advertise more than 100 routes each for IPv4 and IPv6 over the BGP session, the BGP session will go into an idle state with the BGP session DOWN.

100 each for IPv4 and IPv6

This limit cannot be increased.

Routes per Border Gateway Protocol (BGP) session on a public virtual interface

1,000

This limit cannot be increased.

Dedicated connections per link aggregation group (LAG)

 4 when the port speed is less than 100G

2 when the port speed is 100G

Link aggregation groups (LAGs) per Region

10

 Contact your Solutions Architect (SA) or Technical Account Manager (TAM) for further assistance.

Amazon Direct Connect gateways per account

200

 Contact your Solutions Architect (SA) or Technical Account Manager (TAM) for further assistance.

Virtual private gateways per Amazon Direct Connect gateway

20

This limit cannot be increased.
Transit gateways per Amazon Direct Connect gateway 6 This limit cannot be increased.

Virtual interfaces (private or transit) per Amazon Direct Connect gateway

30

 This limit cannot be increased.
Number of prefixes per Amazon Transit Gateway from Amazon to on-premise on a transit virtual interface 200 combined total for IPv4 and IPv6 This limit cannot be increased.
Number of virtual interfaces per virtual private gateway There is no limit.
Number of Direct Connect gateways associated to a transit gateway 20 This limit cannot be increased.
SiteLink prefix limit 100 Contact your Solutions Architect (SA) or Technical Account Manager (TAM) for further assistance.

Amazon Direct Connect supports these port speeds over single-mode fiber: 1 Gbps: 1000BASE-LX (1310 nm), 10 Gbps: 10GBASE-LR (1310 nm) and 100Gbps: 100GBASE-LR4.

BGP quotas

The following are BGP quotas. The BGP timers negotiate down to the lowest value between the routers. The BFD intervals are defined by the slowest device.

  • Default hold timer: 90 seconds

  • Minimum hold timer: 3 seconds

    A hold value of 0 is not supported.

  • Default keepalive timer: 30 seconds

  • Minimum keepalive timer: 1 second

  • Graceful restart timer: 120 seconds

    We recommend that you do not configure graceful restart and BFD at the same time.

  • BFD liveness detection minimum interval: 300 ms

  • BFD minimum multiplier: 3

Load balance considerations

If you want to use load balancing with multiple public VIFs, all the VIFs must be in the same Region.