Legacy cluster support for Windows nodes - Amazon EKS
Removing legacy Windows supportEnable legacy Windows support
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Help improve this page

Want to contribute to this user guide? Scroll to the bottom of this page and select Edit this page on GitHub. Your contributions will help make our user guide better for everyone.

Legacy cluster support for Windows nodes

Before deploying Windows nodes, be aware of the following considerations.

Considerations

  • You can use host networking on Windows nodes using HostProcess Pods. For more information, see Create a Windows HostProcessPod in the Kubernetes documentation.

  • Amazon EKS clusters must contain one or more Linux or Fargate nodes to run core system Pods that only run on Linux, such as CoreDNS.

  • The kubelet and kube-proxy event logs are redirected to the EKS Windows Event Log and are set to a 200 MB limit.

  • You can't use Security groups for Pods with Pods running on Windows nodes.

  • You can't use custom networking with Windows nodes.

  • You can't use IPv6 with Windows nodes.

  • Windows nodes support one elastic network interface per node. By default, the number of Pods that you can run per Windows node is equal to the number of IP addresses available per elastic network interface for the node's instance type, minus one. For more information, see IP addresses per network interface per instance type in the Amazon EC2 User Guide.

  • In an Amazon EKS cluster, a single service with a load balancer can support up to 1024 back-end Pods. Each Pod has its own unique IP address. The previous limit of 64 Pods is no longer the case, after a Windows Server update starting with OS Build 17763.2746.

  • Windows containers aren't supported for Amazon EKS Pods on Fargate.

  • You can't retrieve logs from the vpc-resource-controller Pod. You previously could when you deployed the controller to the data plane.

  • There is a cool down period before an IPv4 address is assigned to a new Pod. This prevents traffic from flowing to an older Pod with the same IPv4 address due to stale kube-proxy rules.

  • The source for the controller is managed on GitHub. To contribute to, or file issues against the controller, visit the project on GitHub.

  • When specifying a custom AMI ID for Windows managed node groups, add eks:kube-proxy-windows to your Amazon IAM Authenticator configuration map. For more information, see Limits and conditions when specifying an AMI ID.

  • If preserving your available IPv4 addresses is crucial for your subnet, refer to EKS Best Practices Guide - Windows Networking IP Address Management for guidance.

Prerequisites

  • An existing cluster. The cluster must be running one of the Kubernetes versions and platform versions listed in the following table. Any Kubernetes and platform versions later than those listed are also supported. If your cluster or platform version is earlier than one of the following versions, you need to enable legacy Windows support on your cluster's data plane. Once your cluster is at one of the following Kubernetes and platform versions, or later, you can remove legacy Windows support and enable Windows support on your control plane.

    Kubernetes version Platform version
    1.30 eks.2
    1.29 eks.1
    1.28 eks.1
    1.27 eks.1
    1.26 eks.1
    1.25 eks.1
    1.24 eks.2

  • Your cluster must have at least one (we recommend at least two) Linux node or Fargate Pod to run CoreDNS. If you enable legacy Windows support, you must use a Linux node (you can't use a Fargate Pod) to run CoreDNS.

  • An existing Amazon EKS cluster IAM role.

Remove legacy Windows support from your data plane

If you enabled Windows support on a cluster that is earlier than a Kubernetes or platform version listed in the Prerequisites, then you must first remove the vpc-resource-controller and vpc-admission-webhook from your data plane. They're deprecated and no longer needed because the functionality that they provided is now enabled on the control plane.

  1. Uninstall the vpc-resource-controller with the following command. Use this command regardless of which tool you originally installed it with. Replace region-code (only the instance of that text after /manifests/) with the Amazon Web Services Region that your cluster is in.

    kubectl delete -f https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-resource-controller/latest/vpc-resource-controller.yaml

  2. Uninstall the vpc-admission-webhook using the instructions for the tool that you installed it with.

    eksctl

    Run the following commands.

    kubectl delete deployment -n kube-system vpc-admission-webhook
kubectl delete service -n kube-system vpc-admission-webhook
kubectl delete mutatingwebhookconfigurations.admissionregistration.k8s.io vpc-admission-webhook-cfg
    kubectl on macOS or Windows

    Run the following command. Replace region-code (only the instance of that text after /manifests/) with the Amazon Web Services Region that your cluster is in.

    kubectl delete -f https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/vpc-admission-webhook-deployment.yaml

  3. Enable Windows support for your cluster on the control plane.

Enable legacy Windows support

If your cluster is at, or later, than one of the Kubernetes and platform versions listed in the Prerequisites, then we recommend that you enable Windows support on your control plane instead. For more information, see Enable Windows support.

The following steps help you to enable legacy Windows support for your Amazon EKS cluster's data plane if your cluster or platform version are earlier than the versions listed in the Prerequisites. Once your cluster and platform version are at, or later than a version listed in the Prerequisites, we recommend that you remove legacy Windows support and enable it for your control plane.

You can use eksctl, a Windows client, or a macOS or Linux client to enable legacy Windows support for your cluster.

eksctl
To enable legacy Windows support for your cluster with eksctl
Prerequisite

This procedure requires eksctl version 0.187.0 or later. You can check your version with the following command.

eksctl version

For more information about installing or upgrading eksctl, see Installation in the eksctl documentation.

  1. Enable Windows support for your Amazon EKS cluster with the following eksctl command. Replace my-cluster with the name of your cluster. This command deploys the VPC resource controller and VPC admission controller webhook that are required on Amazon EKS clusters to run Windows workloads.

    eksctl utils install-vpc-controllers --cluster my-cluster --approve
    Important

    The VPC admission controller webhook is signed with a certificate that expires one year after the date of issue. To avoid down time, make sure to renew the certificate before it expires. For more information, see Renewing the VPC admission webhook certificate.

  2. After you have enabled Windows support, you can launch a Windows node group into your cluster. For more information, see Launching self-managed Windows nodes.

Windows
To enable legacy Windows support for your cluster with a Windows client

In the following steps, replace region-code with the Amazon Web Services Region that your cluster resides in.

  1. Deploy the VPC resource controller to your cluster.

    kubectl apply -f https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-resource-controller/latest/vpc-resource-controller.yaml

  2. Deploy the VPC admission controller webhook to your cluster.

    1. Download the required scripts and deployment files.

      curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/vpc-admission-webhook-deployment.yaml;
curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/Setup-VPCAdmissionWebhook.ps1;
curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/webhook-create-signed-cert.ps1;
curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/webhook-patch-ca-bundle.ps1;

    2. Install OpenSSL and jq.

    3. Set up and deploy the VPC admission webhook.

      ./Setup-VPCAdmissionWebhook.ps1 -DeploymentTemplate ".\vpc-admission-webhook-deployment.yaml"
      Important

      The VPC admission controller webhook is signed with a certificate that expires one year after the date of issue. To avoid down time, make sure to renew the certificate before it expires. For more information, see Renewing the VPC admission webhook certificate.

  3. Determine if your cluster has the required cluster role binding.

    kubectl get clusterrolebinding eks:kube-proxy-windows

    If output similar to the following example output is returned, then the cluster has the necessary role binding.

    NAME                      AGE
eks:kube-proxy-windows    10d

    If the output includes Error from server (NotFound), then the cluster does not have the necessary cluster role binding. Add the binding by creating a file named eks-kube-proxy-windows-crb.yaml with the following content.

    kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: eks:kube-proxy-windows
  labels:
    k8s-app: kube-proxy
    eks.amazonaws.com/component: kube-proxy
subjects:
  - kind: Group
    name: "eks:kube-proxy-windows"
roleRef:
  kind: ClusterRole
  name: system:node-proxier
  apiGroup: rbac.authorization.k8s.io

    Apply the configuration to the cluster.

    kubectl apply -f eks-kube-proxy-windows-crb.yaml

  4. After you have enabled Windows support, you can launch a Windows node group into your cluster. For more information, see Launching self-managed Windows nodes.

macOS and Linux
To enable legacy Windows support for your cluster with a macOS or Linux client

This procedure requires that the openssl library and jq JSON processor are installed on your client system.

In the following steps, replace region-code with the Amazon Web Services Region that your cluster resides in.

  1. Deploy the VPC resource controller to your cluster.

    kubectl apply -f https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-resource-controller/latest/vpc-resource-controller.yaml

  2. Create the VPC admission controller webhook manifest for your cluster.

    1. Download the required scripts and deployment files.

      curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/webhook-create-signed-cert.sh
curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/webhook-patch-ca-bundle.sh
curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/vpc-admission-webhook-deployment.yaml

    2. Add permissions to the shell scripts so that they can be run.

      chmod +x webhook-create-signed-cert.sh webhook-patch-ca-bundle.sh

    3. Create a secret for secure communication.

      ./webhook-create-signed-cert.sh

    4. Verify the secret.

      kubectl get secret -n kube-system vpc-admission-webhook-certs

    5. Configure the webhook and create a deployment file.

      cat ./vpc-admission-webhook-deployment.yaml | ./webhook-patch-ca-bundle.sh > vpc-admission-webhook.yaml

  3. Deploy the VPC admission webhook.

    kubectl apply -f vpc-admission-webhook.yaml
    Important

    The VPC admission controller webhook is signed with a certificate that expires one year after the date of issue. To avoid down time, make sure to renew the certificate before it expires. For more information, see Renewing the VPC admission webhook certificate.

  4. Determine if your cluster has the required cluster role binding.

    kubectl get clusterrolebinding eks:kube-proxy-windows

    If output similar to the following example output is returned, then the cluster has the necessary role binding.

    NAME                     ROLE                              AGE
eks:kube-proxy-windows   ClusterRole/system:node-proxier   19h

    If the output includes Error from server (NotFound), then the cluster does not have the necessary cluster role binding. Add the binding by creating a file named eks-kube-proxy-windows-crb.yaml with the following content.

    kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: eks:kube-proxy-windows
  labels:
    k8s-app: kube-proxy
    eks.amazonaws.com/component: kube-proxy
subjects:
  - kind: Group
    name: "eks:kube-proxy-windows"
roleRef:
  kind: ClusterRole
  name: system:node-proxier
  apiGroup: rbac.authorization.k8s.io

    Apply the configuration to the cluster.

    kubectl apply -f eks-kube-proxy-windows-crb.yaml

  5. After you have enabled Windows support, you can launch a Windows node group into your cluster. For more information, see Launching self-managed Windows nodes.

Renewing the VPC admission webhook certificate

The certificate used by the VPC admission webhook expires one year after issue. To avoid down time, it's important that you renew the certificate before it expires. You can check the expiration date of your current certificate with the following command.

kubectl get secret \
    -n kube-system \
    vpc-admission-webhook-certs -o json | \
    jq -r '.data."cert.pem"' | \
    base64 -decode | \
    openssl x509 \
    -noout \
    -enddate | \
    cut -d= -f2

An example output is as follows.

May 28 14:23:00 2022 GMT

You can renew the certificate using eksctl or a Windows or Linux/macOS computer. Follow the instructions for the tool you originally used to install the VPC admission webhook. For example, if you originally installed the VPC admission webhook using eksctl, then you should renew the certificate using the instructions on the eksctl tab.

eksctl

  1. Reinstall the certificate. Replace my-cluster with the name of your cluster.

    eksctl utils install-vpc-controllers -cluster my-cluster -approve

  2. Verify that you receive the following output.

    2021/05/28 05:24:59 [INFO] generate received request
2021/05/28 05:24:59 [INFO] received CSR
2021/05/28 05:24:59 [INFO] generating key: rsa-2048
2021/05/28 05:24:59 [INFO] encoded CSR

  3. Restart the webhook deployment.

    kubectl rollout restart deployment -n kube-system vpc-admission-webhook

  4. If the certificate that you renewed was expired, and you have Windows Pods stuck in the Container creating state, then you must delete and redeploy those Pods.

Windows

  1. Get the script to generate new certificate.

    curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/webhook-create-signed-cert.ps1;

  2. Prepare parameter for the script.

    ./webhook-create-signed-cert.ps1 -ServiceName vpc-admission-webhook-svc -SecretName vpc-admission-webhook-certs -Namespace kube-system

  3. Restart the webhook deployment.

    kubectl rollout restart deployment -n kube-system vpc-admission-webhook-deployment

  4. If the certificate that you renewed was expired, and you have Windows Pods stuck in the Container creating state, then you must delete and redeploy those Pods.

Linux and macOS
Prerequisite

You must have OpenSSL and jq installed on your computer.

  1. Get the script to generate new certificate.

    curl -O https://s3.cn-north-1.amazonaws.com.cn/amazon-eks/manifests/region-code/vpc-admission-webhook/latest/webhook-create-signed-cert.sh

  2. Change the permissions.

    chmod +x webhook-create-signed-cert.sh

  3. Run the script.

    ./webhook-create-signed-cert.sh

  4. Restart the webhook.

    kubectl rollout restart deployment -n kube-system vpc-admission-webhook-deployment

  5. If the certificate that you renewed was expired, and you have Windows Pods stuck in the Container creating state, then you must delete and redeploy those Pods.