Troubleshooting: File Gateway issues - Amazon Storage Gateway
Error: 1344 (0x00000540)Error: GatewayClockOutOfSyncError: InaccessibleStorageClassError: InvalidObjectStateError: ObjectMissingError: RoleTrustRelationshipInvalidError: S3AccessDeniedError: DroppedNotificationsNotification: HardRebootNotification: RebootTroubleshooting with CloudWatch metrics
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Amazon FSx File Gateway documentation has been moved to What is Amazon FSx File Gateway?

Volume Gateway documentation has been moved to What is Volume Gateway?

Tape Gateway documentation has been moved to What is Tape Gateway?

Troubleshooting: File Gateway issues

You can configure your File Gateway to write log entries to a Amazon CloudWatch log group. If you do, you receive notifications about gateway health status and about any errors that the gateway encounters. You can find information about these error and health notifications in CloudWatch Logs.

In the following sections, you can find information that can help you understand the cause of each error and health notification and how to fix issues.

Error: 1344 (0x00000540)

While migrating files to Amazon S3 you may encounter an ERROR 1344 (0x00000540) if you are trying to copy files with more than 10 Access Control Entries (ACEs) into Amazon S3. Access Control Entries are listed in the Access Control List (ACL).

The Amazon S3 File Gateway can only preserve 10 ACE entries per given file or folder.

To resolve an Error 1344: Copying NTFS Security to Destination Directory.

Reduce the number of entries in Windows Permissions for files or folders that contain more than 10 entries. A common approach is to create a group containing the full list of entries, then replacing the list of entries with that single group. Once the number of entries is less the 10, you can retry copying the files or folders to the gateway.

Error: GatewayClockOutOfSync

You can get a GatewayClockOutOfSync error when the gateway detects a difference of 5 minutes or more between the local system time and the time reported by the Amazon Storage Gateway servers. Clock synchronization issues can negatively impact connectivity between the gateway and Amazon. If the gateway clock is out of sync, I/O errors might occur for NFS and SMB connections, and SMB users might experience authentication errors.

To resolve a GatewayClockOutOfSync error

Error: InaccessibleStorageClass

You can get an InaccessibleStorageClass error when an object has moved out of the Amazon S3 Standard storage class.

Here, usually your File Gateway encounters the error when it tries to either upload the specified object to S3 bucket or read the object from S3 bucket. With this error, generally the object has moved to Amazon S3 Glacier and is in either the S3 Glacier or S3 Glacier Deep Archive storage class.

To resolve an InaccessibleStorageClass error

  • Move the object from the S3 Glacier or S3 Glacier Deep Archive storage class back to S3.

    If you move the object to the S3 bucket to fix an upload error, the file is eventually uploaded. If you move the object to the S3 bucket to fix a read error, the File Gateway's SMB or NFS client can then read the file.

Error: InvalidObjectState

You can get an InvalidObjectState error when a writer other than the specified File Gateway modifies the specified file in the specified S3 bucket. As a result, the state of the file for the File Gateway doesn't match its state in Amazon S3. Any subsequent uploads of the file to Amazon S3 or retrievals of the file from Amazon S3 fail.

To resolve an InvalidObjectState error

If the operation that modifies the file is S3Upload or S3GetObject, do the following:

  1. Save the latest copy of the file to the local file system of your SMB or NFS client (you need this file copy in step 4). If the version of the file in Amazon S3 is the latest, download that version. You can do this using the Amazon Web Services Management Console or Amazon CLI.

  2. Delete the file in Amazon S3 using the Amazon Web Services Management Console or Amazon CLI.

  3. Delete the file from the File Gateway using your SMB or NFS client.

  4. Copy the latest version of the file that you saved in step 1 to Amazon S3 using your SMB or NFS client. Do this through your File Gateway.

Error: ObjectMissing

You can get an ObjectMissing error when a writer other than the specified File Gateway deletes the specified file from the S3 bucket. Any subsequent uploads to Amazon S3 or retrievals from Amazon S3 for the object fail.

To resolve an ObjectMissing error

If the operation that modifies the file is S3Upload or S3GetObject, do the following:

  1. Save the latest copy of the file to the local file system of your SMB or NFS client (you need this file copy in step 3).

  2. Delete the file from the File Gateway using your SMB or NFS client.

  3. Copy the latest version of the file that you saved in step 1 using your SMB or NFS client. Do this through your File Gateway.

Error: RoleTrustRelationshipInvalid

You get this error when the IAM role for a file share has a misconfigured IAM trust relationship (that is, the IAM role does not trust the Storage Gateway principal named storagegateway.amazonaws.com). As a result, the File Gateway would not be able to get the credentials to run any operations on the S3 bucket that backs the file share.

To resolve an RoleTrustRelationshipInvalid error

Error: S3AccessDenied

You can get an S3AccessDenied error for a file share's Amazon S3 bucket access Amazon Identity and Access Management (IAM) role. In this case, the S3 bucket access IAM role that is specified by roleArn in the error doesn't allow the operation involved. The operation isn't allowed because of the permissions for the objects in the directory specified by the Amazon S3 prefix.

To resolve an S3AccessDenied error

  • Modify the Amazon S3 access policy that is attached to roleArn in the File Gateway health log to allow permissions for the Amazon S3 operation. Make sure that the access policy allows permission for the operation that caused the error. Also, allow permission for the directory specified in the log for prefix. For information about Amazon S3 permissions, see Specifying permissions in a policy in Amazon Simple Storage Service User Guide.

    These operations can cause an S3AccessDenied error to occur:

    • S3HeadObject

    • S3GetObject

    • S3ListObjects

    • S3DeleteObject

    • S3PutObject

Error: DroppedNotifications

You might see a DroppedNotifications error instead of other expected types of CloudWatch log entries when free storage space on your gateway's root disk is low. When available root disk space is less than 1 GB, the gateway stops generating detailed CloudWatch log notifications as a precautionary measure.

To resolve a DroppedNotifications error

  1. Check the Root Disk Usage metric on the Monitoring tab for your gateway in the Storage Gateway console to determine whether available root disk space is running low.

  2. Increase the size of the gateway's root storage disk if available space is less than 1 GB. Refer to your virtual machine hypervisor's documentation for instructions.

    To increase root disk size for Amazon EC2 gateways, see Request modifications to your EBS volumes in the Amazon Elastic Compute Cloud User Guide.

    Note

    It is not possible to increase the root disk size for the Amazon Storage Gateway Hardware Appliance.

  3. Restart your gateway.

Notification: HardReboot

You can get a HardReboot notification when the gateway VM is restarted unexpectedly. Such a restart can be due to loss of power, a hardware failure, or another event. For VMware gateways, a reset by vSphere High Availability Application Monitoring can cause this event.

When your gateway runs in such an environment, check for the presence of the HealthCheckFailure notification and consult the VMware events log for the VM.

Notification: Reboot

You can get a reboot notification when the gateway VM is restarted. You can restart a gateway VM by using the VM Hypervisor Management console or the Storage Gateway console. You can also restart by using the gateway software during the gateway's maintenance cycle.

If the time of the reboot is within 10 minutes of the gateway's configured maintenance start time, this reboot is probably a normal occurrence and not a sign of any problem. If the reboot occurred significantly outside the maintenance window, check whether the gateway was restarted manually.

Troubleshooting: Using CloudWatch metrics

You can find information following about actions to address issues using Amazon CloudWatch metrics with Storage Gateway.

Your gateway reacts slowly when browsing directories

If your File Gateway reacts slowly when you run the ls command or browse directories, check the IndexFetch and IndexEviction CloudWatch metrics:

  • If the IndexFetch metric is greater than 0 when you run an ls command or browse directories, your File Gateway started without information on the contents of the directory affected and had to access Amazon S3. Subsequent efforts to list the contents of that directory should go faster.

  • If the IndexEviction metric is greater than 0, it means that your File Gateway has reached the limit of what it can manage in its cache at that time. In this case, your File Gateway has to free some storage space from the least recently accessed directory to list a new directory. If this occurs frequently and there is a performance impact, contact Amazon Web Services Support.

    Discuss with Amazon Web Services Support the contents of the related S3 bucket and recommendations to improve performance based on your use case.

Your gateway isn't responding

If your File Gateway isn't responding, do the following:

  • If there was a recent reboot or software update, then check the IOWaitPercent metric. This metric shows the percentage of time that the CPU is idle when there is an outstanding disk I/O request. In some cases, this might be high (10 or greater) and might have risen after the server was rebooted or updated. In these cases, then your File Gateway might be bottlenecked by a slow root disk as it rebuilds the index cache to RAM. You can address this issue by using a faster physical disk for the root disk.

  • If the MemUsedBytes metric is at or nearly the same as the MemTotalBytes metric, then your File Gateway is running out of available RAM. Make sure that your File Gateway has at least the minimum required RAM. If it already does, consider adding more RAM to your File Gateway based on your workload and use case.

    If the file share is SMB, the issue might also be due to the number of SMB clients connected to the file share. To see the number of clients connected at any given time, check the SMBV(1/2/3)Sessions metric. If there are many clients connected, you might need to add more RAM to your File Gateway.

Your gateway is slow transferring data to Amazon S3

If your File Gateway is slow transferring data to Amazon S3, do the following:

  • If the CachePercentDirty metric is 80 or greater, your File Gateway is writing data faster to disk than it can upload the data to Amazon S3. Consider increasing the bandwidth for upload from your File Gateway, adding one or more cache disks, or slowing down client writes.

  • If the CachePercentDirty metric is low, check the IoWaitPercent metric. If IoWaitPercent is greater than 10, your File Gateway might be bottlenecked by the speed of the local cache disk. We recommend local solid state drive (SSD) disks for your cache, preferably NVM Express (NVMe). If such disks aren't available, try using multiple cache disks from separate physical disks for a performance improvement.

  • If S3PutObjectRequestTime, S3UploadPartRequestTime, or S3GetObjectRequestTime are high, there might be a network bottleneck. Try analyzing your network to verify that the gateway has the expected bandwidth.

Your gateway is performing more Amazon S3 operations than expected

If your File Gateway is performing more Amazon S3 operations than expected, check the FilesRenamed metric. Rename operations are expensive to run in Amazon S3. Optimize your workflow to minimize the number of rename operations.

You do not see files in your Amazon S3 bucket

If you notice that files on the gateway are not reflected in the Amazon S3 bucket, check the FilesFailingUpload metric. If the metric reports that some files are failing upload, check your health notifications. When files fail to upload, the gateway generates a health notification containing more details on the issue.

Your gateway backup job fails or there are errors when writing to your gateway

If your File Gateway backup job fails or there are errors when writing to your File Gateway, do the following:

  • If the CachePercentDirty metric is 90 percent or greater, your File Gateway can't accept new writes to disk because there is not enough available space on the cache disk. To see how fast your File Gateway is uploading to Amazon S3, view the CloudBytesUploaded metric. Compare that metric with the WriteBytes metric, which shows how fast the client is writing files to your File Gateway. If the SMB client is writing to your File Gateway faster than it can upload to Amazon S3, add more cache disks to cover the size of the backup job at a minimum. Or, increase the upload bandwidth.

  • If a large file copy such as backup job fails but the CachePercentDirty metric is less than 80 percent, your File Gateway might be hitting a client-side session timeout. For SMB, you can increase this timeout using the PowerShell command Set-SmbClientConfiguration -SessionTimeout 300. Running this command sets the timeout to 300 seconds.

    For NFS, make sure that the client is mounted using a hard mount instead of a soft mount.