AssociateSubnets
Associates the specified subnets in the Amazon VPC to the firewall. You can specify one subnet for each of the Availability Zones that the VPC spans.
This request creates an Amazon Network Firewall firewall endpoint in each of the subnets. To enable the firewall's protections, you must also modify the VPC's route tables for each subnet's Availability Zone, to redirect the traffic that's coming into and going out of the zone through the firewall endpoint.
For a proxy mode firewall, use this operation to add Availability Zones to the firewall. For each subnet, specify a NAT gateway in NatGatewayCreateMappings in the same Availability Zone. You can't add an Availability Zone that the firewall already uses. The firewall keeps working in its other Availability Zones while Network Firewall sets up the new one. If Network Firewall can't set up the new Availability Zone, it removes the Availability Zone from the firewall. It also deletes the NAT gateway that it created there. The Availability Zone's Attachment status shows the reason. You can then add the Availability Zone again.
Request Syntax
{
"FirewallArn": "string",
"FirewallName": "string",
"NatGatewayCreateMappings": [
{
"AllocationIds": [ "string" ],
"PrivateIps": [ "string" ],
"SubnetId": "string"
}
],
"SubnetMappings": [
{
"IPAddressType": "string",
"SubnetId": "string"
}
],
"UpdateToken": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters.
The request accepts the following data in JSON format.
- FirewallArn
-
The Amazon Resource Name (ARN) of the firewall.
You must specify the ARN or the name, and you can specify both.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 256.
Pattern:
^arn:aws.*Required: No
- FirewallName
-
The descriptive name of the firewall. You can't change the name of a firewall after you create it.
You must specify the ARN or the name, and you can specify both.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern:
^[a-zA-Z0-9-]+$Required: No
- NatGatewayCreateMappings
-
The NAT gateways that Network Firewall creates for the Availability Zones that you add to a proxy mode firewall. For a proxy mode firewall, you must specify one mapping for each Availability Zone in
SubnetMappings, and no other Availability Zones. Each NAT gateway subnet must be in the firewall's VPC and can't be one of the firewall endpoint subnets.You can't specify this for a firewall that isn't a proxy mode firewall.
Type: Array of NatGatewayCreateMapping objects
Array Members: Minimum number of 1 item. Maximum number of 20 items.
Required: No
- SubnetMappings
-
The IDs of the subnets that you want to associate with the firewall.
Type: Array of SubnetMapping objects
Required: Yes
- UpdateToken
-
An optional token that you can use for optimistic locking. Network Firewall returns a token to your requests that access the firewall. The token marks the state of the firewall resource at the time of the request.
To make an unconditional change to the firewall, omit the token in your update request. Without the token, Network Firewall performs your updates regardless of whether the firewall has changed since you last retrieved it.
To make a conditional change to the firewall, provide the token in your update request. Network Firewall uses the token to ensure that the firewall hasn't changed since you last retrieved it. If it has changed, the operation fails with an
InvalidTokenException. If this happens, retrieve the firewall again to get a current copy of it with a new token. Reapply your changes as needed, then try the operation again using the new token.Type: String
Length Constraints: Minimum length of 1. Maximum length of 1024.
Pattern:
^([0-9a-f]{8})-([0-9a-f]{4}-){3}([0-9a-f]{12})$Required: No
Response Syntax
{
"FirewallArn": "string",
"FirewallName": "string",
"SubnetMappings": [
{
"IPAddressType": "string",
"SubnetId": "string"
}
],
"UpdateToken": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
- FirewallArn
-
The Amazon Resource Name (ARN) of the firewall.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 256.
Pattern:
^arn:aws.* - FirewallName
-
The descriptive name of the firewall. You can't change the name of a firewall after you create it.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern:
^[a-zA-Z0-9-]+$ - SubnetMappings
-
The IDs of the subnets that are associated with the firewall.
Type: Array of SubnetMapping objects
- UpdateToken
-
An optional token that you can use for optimistic locking. Network Firewall returns a token to your requests that access the firewall. The token marks the state of the firewall resource at the time of the request.
To make an unconditional change to the firewall, omit the token in your update request. Without the token, Network Firewall performs your updates regardless of whether the firewall has changed since you last retrieved it.
To make a conditional change to the firewall, provide the token in your update request. Network Firewall uses the token to ensure that the firewall hasn't changed since you last retrieved it. If it has changed, the operation fails with an
InvalidTokenException. If this happens, retrieve the firewall again to get a current copy of it with a new token. Reapply your changes as needed, then try the operation again using the new token.Type: String
Length Constraints: Minimum length of 1. Maximum length of 1024.
Pattern:
^([0-9a-f]{8})-([0-9a-f]{4}-){3}([0-9a-f]{12})$
Errors
For information about the errors that are common to all actions, see Common Error Types.
- InsufficientCapacityException
-
Amazon doesn't currently have enough available capacity to fulfill your request. Try your request later.
HTTP Status Code: 500
- InternalServerError
-
Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
HTTP Status Code: 500
- InvalidOperationException
-
The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
HTTP Status Code: 400
- InvalidRequestException
-
The operation failed because of a problem with your request. Examples include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
HTTP Status Code: 400
-
- InvalidTokenException
-
The token you provided is stale or isn't valid for the operation.
HTTP Status Code: 400
- ResourceNotFoundException
-
Unable to locate a resource using the parameters that you provided.
HTTP Status Code: 400
- ThrottlingException
-
Unable to process the request due to throttling limitations.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific Amazon SDKs, see the following: