Minimizing vacuum times - Amazon Redshift
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Minimizing vacuum times

Amazon Redshift automatically sorts data and runs VACUUM DELETE in the background. This lessens the need to run the VACUUM command. Vacuuming is potentially a time consuming process. Depending on the nature of your data, we recommend the following practices to minimize vacuum times.

Decide whether to reindex

You can often significantly improve query performance by using an interleaved sort style, but over time performance might degrade if the distribution of the values in the sort key columns changes.

When you initially load an empty interleaved table using COPY or CREATE TABLE AS, Amazon Redshift automatically builds the interleaved index. If you initially load an interleaved table using INSERT, you need to run VACUUM REINDEX afterwards to initialize the interleaved index.

Over time, as you add rows with new sort key values, performance might degrade if the distribution of the values in the sort key columns changes. If your new rows fall primarily within the range of existing sort key values, you don’t need to reindex. Run VACUUM SORT ONLY or VACUUM FULL to restore the sort order.

The query engine is able to use sort order to efficiently select which data blocks need to be scanned to process a query. For an interleaved sort, Amazon Redshift analyzes the sort key column values to determine the optimal sort order. If the distribution of key values changes, or skews, as rows are added, the sort strategy will no longer be optimal, and the performance benefit of sorting will degrade. To reanalyze the sort key distribution you can run a VACUUM REINDEX. The reindex operation is time consuming, so to decide whether a table will benefit from a reindex, query the SVV_INTERLEAVED_COLUMNS view.

For example, the following query shows details for tables that use interleaved sort keys.

select tbl as tbl_id, stv_tbl_perm.name as table_name, col, interleaved_skew, last_reindex from svv_interleaved_columns, stv_tbl_perm where svv_interleaved_columns.tbl = stv_tbl_perm.id and interleaved_skew is not null; tbl_id | table_name | col | interleaved_skew | last_reindex --------+------------+-----+------------------+-------------------- 100048 | customer | 0 | 3.65 | 2015-04-22 22:05:45 100068 | lineorder | 1 | 2.65 | 2015-04-22 22:05:45 100072 | part | 0 | 1.65 | 2015-04-22 22:05:45 100077 | supplier | 1 | 1.00 | 2015-04-22 22:05:45 (4 rows)

The value for interleaved_skew is a ratio that indicates the amount of skew. A value of 1 means that there is no skew. If the skew is greater than 1.4, a VACUUM REINDEX will usually improve performance unless the skew is inherent in the underlying set.

You can use the date value in last_reindex to determine how long it has been since the last reindex.

Reduce the size of the unsorted region

The unsorted region grows when you load large amounts of new data into tables that already contain data or when you do not vacuum tables as part of your routine maintenance operations. To avoid long-running vacuum operations, use the following practices:

  • Run vacuum operations on a regular schedule.

    If you load your tables in small increments (such as daily updates that represent a small percentage of the total number of rows in the table), running VACUUM regularly will help ensure that individual vacuum operations go quickly.

  • Run the largest load first.

    If you need to load a new table with multiple COPY operations, run the largest load first. When you run an initial load into a new or truncated table, all of the data is loaded directly into the sorted region, so no vacuum is required.

  • Truncate a table instead of deleting all of the rows.

    Deleting rows from a table does not reclaim the space that the rows occupied until you perform a vacuum operation; however, truncating a table empties the table and reclaims the disk space, so no vacuum is required. Alternatively, drop the table and re-create it.

  • Truncate or drop test tables.

    If you are loading a small number of rows into a table for test purposes, don't delete the rows when you are done. Instead, truncate the table and reload those rows as part of the subsequent production load operation.

  • Perform a deep copy.

    If a table that uses a compound sort key table has a large unsorted region, a deep copy is much faster than a vacuum. A deep copy recreates and repopulates a table by using a bulk insert, which automatically re-sorts the table. If a table has a large unsorted region, a deep copy is much faster than a vacuum. The trade off is that you cannot make concurrent updates during a deep copy operation, which you can do during a vacuum. For more information, see Amazon Redshift best practices for designing queries.

Reduce the volume of merged rows

If a vacuum operation needs to merge new rows into a table's sorted region, the time required for a vacuum will increase as the table grows larger. You can improve vacuum performance by reducing the number of rows that must be merged.

Before a vacuum, a table consists of a sorted region at the head of the table, followed by an unsorted region, which grows whenever rows are added or updated. When a set of rows is added by a COPY operation, the new set of rows is sorted on the sort key as it is added to the unsorted region at the end of the table. The new rows are ordered within their own set, but not within the unsorted region.

The following diagram illustrates the unsorted region after two successive COPY operations, where the sort key is CUSTID. For simplicity, this example shows a compound sort key, but the same principles apply to interleaved sort keys, except that the impact of the unsorted region is greater for interleaved tables.

An unsorted table holding records from two COPY operations.

A vacuum restores the table's sort order in two stages:

  1. Sort the unsorted region into a newly-sorted region.

    The first stage is relatively cheap, because only the unsorted region is rewritten. If the range of sort key values of the newly sorted region is higher than the existing range, only the new rows need to be rewritten, and the vacuum is complete. For example, if the sorted region contains ID values 1 to 500 and subsequent copy operations add key values greater than 500, then only the unsorted region needs to be rewritten.

  2. Merge the newly-sorted region with the previously-sorted region.

    If the keys in the newly sorted region overlap the keys in the sorted region, then VACUUM needs to merge the rows. Starting at the beginning of the newly-sorted region (at the lowest sort key), the vacuum writes the merged rows from the previously sorted region and the newly sorted region into a new set of blocks.

The extent to which the new sort key range overlaps the existing sort keys determines the extent to which the previously-sorted region will need to be rewritten. If the unsorted keys are scattered throughout the existing sort range, a vacuum might need to rewrite existing portions of the table.

The following diagram shows how a vacuum would sort and merge rows that are added to a table where CUSTID is the sort key. Because each copy operation adds a new set of rows with key values that overlap the existing keys, almost the entire table needs to be rewritten. The diagram shows single sort and merge, but in practice, a large vacuum consists of a series of incremental sort and merge steps.

A VACUUM operation on the example table in two steps. First the new rows are sorted, then they are merged with the existing rows.

If the range of sort keys in a set of new rows overlaps the range of existing keys, the cost of the merge stage continues to grow in proportion to the table size as the table grows while the cost of the sort stage remains proportional to the size of the unsorted region. In such a case, the cost of the merge stage overshadows the cost of the sort stage, as the following diagram shows.

Diagram showing how the merge stage becomes more costly when new rows have sort keys overlapping with existing rows.

To determine what proportion of a table was remerged, query SVV_VACUUM_SUMMARY after the vacuum operation completes. The following query shows the effect of six successive vacuums as CUSTSALES grew larger over time.

select * from svv_vacuum_summary where table_name = 'custsales'; table_name | xid | sort_ | merge_ | elapsed_ | row_ | sortedrow_ | block_ | max_merge_ | | partitions | increments | time | delta | delta | delta | partitions -----------+------+------------+------------+------------+-------+------------+---------+--------------- custsales | 7072 | 3 | 2 | 143918314 | 0 | 88297472 | 1524 | 47 custsales | 7122 | 3 | 3 | 164157882 | 0 | 88297472 | 772 | 47 custsales | 7212 | 3 | 4 | 187433171 | 0 | 88297472 | 767 | 47 custsales | 7289 | 3 | 4 | 255482945 | 0 | 88297472 | 770 | 47 custsales | 7420 | 3 | 5 | 316583833 | 0 | 88297472 | 769 | 47 custsales | 9007 | 3 | 6 | 306685472 | 0 | 88297472 | 772 | 47 (6 rows)

The merge_increments column gives an indication of the amount of data that was merged for each vacuum operation. If the number of merge increments over consecutive vacuums increases in proportion to the growth in table size, it indicates that each vacuum operation is remerging an increasing number of rows in the table because the existing and newly sorted regions overlap.

Load your data in sort key order

If you load your data in sort key order using a COPY command, you might reduce or even remove the need to vacuum.

COPY automatically adds new rows to the table's sorted region when all of the following are true:

  • The table uses a compound sort key with only one sort column.

  • The sort column is NOT NULL.

  • The table is 100 percent sorted or empty.

  • All the new rows are higher in sort order than the existing rows, including rows marked for deletion. In this instance, Amazon Redshift uses the first eight bytes of the sort key to determine sort order.

For example, suppose you have a table that records customer events using a customer ID and time. If you sort on customer ID, it’s likely that the sort key range of new rows added by incremental loads will overlap the existing range, as shown in the previous example, leading to an expensive vacuum operation.

If you set your sort key to a timestamp column, your new rows will be appended in sort order at the end of the table, as the following diagram shows, reducing or even removing the need to vacuum.

A table that uses a timestamp column as the sort key, getting new records that don't need to be sorted.

Use time series tables to reduce stored data

If you maintain data for a rolling time period, use a series of tables, as the following diagram illustrates.

Five tables with data from five quarters. The oldest table is deleted to maintain a year of rolling time.

Create a new table each time you add a set of data, then delete the oldest table in the series. You gain a double benefit:

  • You avoid the added cost of deleting rows, because a DROP TABLE operation is much more efficient than a mass DELETE.

  • If the tables are sorted by timestamp, no vacuum is needed. If each table contains data for one month, a vacuum will at most have to rewrite one month’s worth of data, even if the tables are not sorted by timestamp.

You can create a UNION ALL view for use by reporting queries that hides the fact that the data is stored in multiple tables. If a query filters on the sort key, the query planner can efficiently skip all the tables that aren't used. A UNION ALL can be less efficient for other types of queries, so you should evaluate query performance in the context of all queries that use the tables.