List of Debugger Built-in Rules

Use the Debugger built-in rules provided by Amazon SageMaker Debugger and analyze metrics and tensors collected while training your models. The Debugger built-in rules monitor various common conditions that are critical for the success of a training job. You can call the built-in rules using Amazon SageMaker Python SDK or the low-level SageMaker API operations. There's no additional cost for using the built-in rules. For more information about billing, see the Amazon SageMaker Pricing page.

Note

The maximum numbers of built-in rules that you can attach to a training job is 20. SageMaker Debugger fully manages the built-in rules and analyzes your training job synchronously.

Important

To use the new Debugger features, you need to upgrade the SageMaker Python SDK and the SMDebug client library. In your iPython kernel, Jupyter notebook, or JupyterLab environment, run the following code to install the latest versions of the libraries and restart the kernel.


import sys
import IPython
!{sys.executable} -m pip install -U sagemaker smdebug
IPython.Application.instance().kernel.do_shutdown(True)

Debugger Rule

The following rules are the Debugger built-in rules that are callable using the Rule.sagemaker classmethod.

Debugger built-in rules for generating training reports
Scope of Validity	Built-in Rules
Training Report for SageMaker XGboost training job	`create_xgboost_report`

Debugger built-in rules for debugging model training data (output tensors)
Scope of Validity	Built-in Rules
Deep learning frameworks (TensorFlow, MXNet, and PyTorch)	`dead_relu` `exploding_tensor` `poor_weight_initialization` `saturated_activation` `vanishing_gradient` `weight_update_ratio`
Deep learning frameworks (TensorFlow, MXNet, and PyTorch) and the XGBoost algorithm	`all_zero` `class_imbalance` `loss_not_decreasing` `overfit` `overtraining` `similar_across_runs` `stalled_training_rule` `tensor_variance` `unchanged_tensor`
Deep learning applications	`check_input_images` `nlp_sequence_ratio`
XGBoost algorithm	`confusion` `feature_importance_overweight` `tree_depth`

To use the built-in rules with default parameter values – use the following configuration format:


from sagemaker.debugger import Rule, ProfilerRule, rule_configs

rules = [
    Rule.sagemaker(rule_configs.built_in_rule_name_1()),
    Rule.sagemaker(rule_configs.built_in_rule_name_2()),
    ...
    Rule.sagemaker(rule_configs.built_in_rule_name_n())
]

To use the built-in rules with customizing the parameter values – use the following configuration format:


from sagemaker.debugger import Rule, ProfilerRule, rule_configs

rules = [
    Rule.sagemaker(
        base_config=rule_configs.built_in_rule_name(),
        rule_parameters={
                "key": "value"
        }
        collections_to_save=[ 
            CollectionConfig(
                name="tensor_collection_name", 
                parameters={
                    "key": "value"
                } 
            )
        ]
    )
]

To find available keys for the rule_parameters parameter, see the parameter description tables.

Sample rule configuration codes are provided for each built-in rule below the parameter description tables.

For a full instruction and examples of using the Debugger built-in rules, see Debugger Built-in Rules Example Code.
For a full instruction on using the built-in rules with the low-level SageMaker API operations, see Configure Debugger Using Amazon SageMaker API.

CreateXgboostReport

The CreateXgboostReport rule collects output tensors from an XGBoost training job and autogenerates a comprehensive training report. You can download a comprehensive profiling report while a training job is running or after the training job is complete, and check progress of training or the final result of the training job. The CreateXgboostReport rule collects the following output tensors by default:

hyperparameters – Saves at the first step
metrics – Saves loss and accuracy every 5 steps
feature_importance – Saves every 5 steps
predictions – Saves every 5 steps
labels – Saves every 5 steps

Parameter Descriptions for the CreateXgboostReport Rule
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String

Parameter Descriptions for the CreateXgboostReport Rule

Parameter Name Description

base_trial

The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger.

Required

Valid values: String


rules=[
    Rule.sagemaker(
        rule_configs.create_xgboost_report()
    )  
]

DeadRelu

This rule detects when the percentage of rectified linear unit (ReLU) activation functions in a trial are considered dead because their activation activity has dropped below a threshold. If the percent of inactive ReLUs in a layer is greater than the threshold_layer value of inactive ReLUs, the rule returns True.

Parameter Descriptions for the DeadRelu Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: `".*relu_output"`
`threshold_inactivity`	Defines a level of activity below which a ReLU is considered to be dead. A ReLU might be active in the beginning of a trial and then slowly die during the training process. If the ReLU is active less than the `threshold_inactivity`, it is considered to be dead. Optional Valid values: Float Default values: `1.0` (in percentage)
`threshold_layer`	Returns `True` if the percentage of inactive ReLUs in a layer is greater than `threshold_layer`. Returns `False` if the percentage of inactive ReLUs in a layer is less than `threshold_layer`. Optional Valid values: Float Default values: `50.0` (in percentage)


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.dead_relu(),
        rule_parameters={
                "tensor_regex": ".*relu_output|.*ReLU_output",
                "threshold_inactivity": "1.0",
                "threshold_layer": "50.0"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="custom_relu_collection", 
                parameters={
                    "include_regex: ".*relu_output|.*ReLU_output",
                    "save_interval": "500"
                } 
            )
        ]
    )
]

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

This rule is not available for the XGBoost algorithm.

ExplodingTensor

This rule detects whether the tensors emitted during training have non-finite values, either infinite or NaN (not a number). If a non-finite value is detected, the rule returns True.

Parameter Descriptions for the ExplodingTensor Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: String Default value: `None`
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: String Default value: `None`
`only_nan`	`True` to monitor the `base_trial` tensors only for `NaN` values and not for infinity. `False` to treat both `NaN` and infinity as exploding values and to monitor for both. Optional Default value: `False`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.exploding_tensor(),
        rule_parameters={
                "tensor_regex": ".*gradient",
                "only_nan": "False"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="gradients", 
                parameters={
                    "save_interval": "500"
                }
            )
        ]
    )
]

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

This rule is not available for the XGBoost algorithm.

PoorWeightInitialization

This rule detects if your model parameters have been poorly initialized.

Good initialization breaks the symmetry of the weights and gradients in a neural network and maintains commensurate activation variances across layers. Otherwise, the neural network doesn't learn effectively. Initializers like Xavier aim to keep variance constant across activations, which is especially relevant for training very deep neural nets. Too small an initialization can lead to vanishing gradients. Too large an initialization can lead to exploding gradients. This rule checks the variance of activation inputs across layers, the distribution of gradients, and the loss convergence for the initial steps to determine if a neural network has been poorly initialized.

Parameter Descriptions for the PoorWeightInitialization Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`activation_inputs_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: String Default value: `".*relu_input"`
`threshold`	If the ratio between minimum and maximum variance of weights per layer exceeds the `threshold` at a step, the rule returns `True`. Optional Valid values: Float Default value: `10.0`
`distribution_range`	If the minimum difference between 5th and 95th percentiles of the gradient distribution is less than the `distribution_range`, the rule returns `True`. Optional Valid values: Float Default value: `0.001`
`patience`	The number of steps to wait until the loss is considered to be no longer decreasing. Optional Valid values: Integer Default value: `5`
`steps`	The number of steps this rule analyzes. You typically need to check only the first few iterations. Optional Valid values: Float Default value: `10`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.poor_weight_initialization(),
        rule_parameters={
                "activation_inputs_regex": ".*relu_input|.*ReLU_input",
                "threshold": "10.0",
                "distribution_range": "0.001",
                "patience": "5",
                "steps": "10"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="custom_relu_collection", 
                parameters={
                    "include_regex": ".*relu_input|.*ReLU_input",
                    "save_interval": "500"
                } 
            )
        ]
    )
]

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

This rule is not available for the XGBoost algorithm.

SaturatedActivation

This rule detects if the tanh and sigmoid activation layers are becoming saturated. An activation layer is saturated when the input of the layer is close to the maximum or minimum of the activation function. The minimum and maximum of the tanh and sigmoid activation functions are defined by their respective min_threshold and max_thresholds values. If the activity of a node drops below the threshold_inactivity percentage, it is considered saturated. If more than a threshold_layer percent of the nodes are saturated, the rule returns True.

Parameter Descriptions for the SaturatedActivation Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: List of strings or a comma-separated string Default value: None
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: String Default value: `".tanh_input\|.sigmoid_input".`
`threshold_tanh_min`	The minimum and maximum thresholds that define the extremes of the input for a tanh activation function, defined as: `(min_threshold, max_threshold)`. The default values are determined based on a vanishing gradient threshold of 0.0000001. Optional Valid values: Float Default values: `-9.4999`
`threshold_tanh_max`	The minimum and maximum thresholds that define the extremes of the input for a tanh activation function, defined as: `(min_threshold, max_threshold)`. The default values are determined based on a vanishing gradient threshold of 0.0000001. Optional Valid values: Float Default values: `9.4999`
`threshold_sigmoid_min`	The minimum and maximum thresholds that define the extremes of the input for a sigmoid activation function, defined as: `(min_threshold, max_threshold)`. The default values are determined based on a vanishing gradient threshold of 0.0000001. Optional Valid values: Float Default values: `-23`
`threshold_sigmoid_max`	The minimum and maximum thresholds that define the extremes of the input for a sigmoid activation function, defined as: `(min_threshold, max_threshold)`. The default values are determined based on a vanishing gradient threshold of 0.0000001. Optional Valid values: Float Default values: `16.99999`
`threshold_inactivity`	The percentage of inactivity below which the activation layer is considered to be saturated. The activation might be active in the beginning of a trial and then slowly become less active during the training process. Optional Valid values: Float Default values: `1.0`
`threshold_layer`	Returns `True` if the number of saturated activations in a layer is greater than the `threshold_layer` percentage. Returns `False` if the number of saturated activations in a layer is less than the `threshold_layer` percentage. Optional Valid values: Float Default values: `50.0`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.saturated_activation(),
        rule_parameters={
                "tensor_regex": ".*tanh_input|.*sigmoid_input",
                "threshold_tanh_min": "-9.4999",
                "threshold_tanh_max": "9.4999",
                "threshold_sigmoid_min": "-23",
                "threshold_sigmoid_max": "16.99999",
                "threshold_inactivity": "1.0",
                "threshold_layer": "50.0"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="custom_activations_collection",
                parameters={
                    "include_regex": ".*tanh_input|.*sigmoid_input"
                    "save_interval": "500"
                } 
            )
        ]
    )
]

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

This rule is not available for the XGBoost algorithm.

VanishingGradient

This rule detects if the gradients in a trial become extremely small or drop to a zero magnitude. If the mean of the absolute values of the gradients drops below a specified threshold, the rule returns True.

Parameters Descriptions for the VanishingGradient Rule
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`threshold`	The value at which the gradient is determined to be vanishing. Optional Valid values: Float Default value: `0.0000001`.

Parameters Descriptions for the VanishingGradient Rule

Parameter Name Description

base_trial

The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger.

Required

Valid values: String

threshold

The value at which the gradient is determined to be vanishing.

Optional

Valid values: Float

Default value: 0.0000001.


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.vanishing_gradient(),
        rule_parameters={
                "threshold": "0.0000001"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="gradients", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

This rule is not available for the XGBoost algorithm.

WeightUpdateRatio

This rule keeps track of the ratio of updates to weights during training and detects if that ratio gets too large or too small. If the ratio of updates to weights is larger than the large_threshold value or if this ratio is smaller than small_threshold, the rule returns True.

Conditions for training are best when the updates are commensurate to gradients. Excessively large updates can push the weights away from optimal values, and very small updates result in very slow convergence. This rule requires weights to be available for two training steps, and train.save_interval needs to be set equal to num_steps.

Parameter Descriptions for the WeightUpdateRatio Rule
Parameter Name,	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`num_steps`	The number of steps across which the rule checks to determine if the tensor has changed. The number of steps across which you want to compare the weight ratios. If you pass no value, the rule runs by default against the current step and the immediately previous saved step. If you override the default by passing a value for this parameter, the comparison is done between weights at step `s` and at a step `>= s - num_steps`. Optional Valid values: Integer Default value: `None`
`large_threshold`	The maximum value that the ratio of updates to weight can take before the rule returns `True`. Optional Valid values: Float Default value: `10.0`
`small_threshold`	The minimum value that the ratio of updates to weight can take, below which the rule returns `True`. Optional Valid values: Float Default value: `0.00000001`
`epsilon`	A small constant used to ensure that Debugger does not divide by zero when computing the ratio updates to weigh. Optional Valid values: Float Default value: `0.000000001`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.weight_update_ratio(),
        rule_parameters={
                "num_steps": "100",
                "large_threshold": "10.0",
                "small_threshold": "0.00000001",
                "epsilon": "0.000000001"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="weights", 
                parameters={
                    "train.save_interval": "100"
                } 
            )
        ]
    )
]

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

This rule is not available for the XGBoost algorithm.

AllZero

This rule detects if all or a specified percentage of the tensor values are zero.

This rule can be applied either to one of the supported deep learning frameworks (TensorFlow, MXNet, and PyTorch) or to the XGBoost algorithm. You must specify either the collection_names or tensor_regex parameter. If both the parameters are specified, the rule inspects the union of tensors from both sets.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameters Descriptions for the AllZero Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: List of strings or a comma-separated string Default value: `None`
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: `None`
`threshold`	Specifies the percentage of values in the tensor that needs to be zero for this rule to be invoked. Optional Valid values: Float Default value: 100 (in percentage)


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.all_zero(),
        rule_parameters={
                "tensor_regex": ".*",
                "threshold": "100"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="all", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

ClassImbalance

This rule measures sampling imbalances between classes and throws errors if the imbalance exceeds a threshold or if too many mispredictions for underrepresented classes occur as a result of the imbalance.

Classification models require well-balanced classes in the training dataset or a proper weighting/sampling of classes during training. The rule performs the following checks:

It counts the occurrences per class. If the ratio of number of samples between smallest and largest class is larger than the threshold_imbalance, an error is thrown.
It checks the prediction accuracy per class. If resampling or weighting has not been correctly applied, then the model can reach high accuracy for the class with many training samples, but low accuracy for the classes with few training samples. If a fraction of mispredictions for a certain class is above threshold_misprediction, an error is thrown.

This rule can be applied either to one of the supported deep learning frameworks (TensorFlow, MXNet, and PyTorch) or to the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the ClassImbalance Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`threshold_imbalance`	The acceptable imbalance between the number of samples in the smallest class and in the largest class. Exceeding this threshold value throws an error. Optional Valid values: Float Default value: `10`
`threshold_misprediction`	A limit on the fraction of mispredictions allowed for each class. Exceeding this threshold throws an error. The underrepresented classes are most at risk of crossing this threshold. Optional Valid values: Float Default value: `0.7`
`samples`	The number of labels that have to be processed before an imbalance is evaluated. The rule might not be triggered until it has seen sufficient samples across several steps. The more classes that your dataset contains, the larger this `sample` number should be. Optional Valid values: Integer Default value: `500` (assuming a dataset like MNIST with 10 classes)
`argmax`	If `True`, np.argmax is applied to the prediction tensor. Required when you have a vector of probabilities for each class. It is used to determine which class has the highest probability. Conditional Valid values: Boolean Default value: `False`
`labels_regex`	The name of the tensor that contains the labels. Optional Valid values: String Default value: `".*labels"`
`predictions_regex`	The name of the tensor that contains the predictions. Optional Valid values: String Default value: `".*predictions"`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.class_imbalance(),
        rule_parameters={
                "threshold_imbalance": "10",
                "threshold_misprediction": "0.7",
                "samples": "500",
                "argmax": "False",
                "labels_regex": ".*labels",
                "predictions_regex": ".*predictions"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="custom_output_collection",
                parameters={
                    "include_regex": ".*labels|.*predictions",
                    "save_interval": "500"
                } 
            )
        ]
    )
]

LossNotDecreasing

This rule detects when the loss is not decreasing in value at an adequate rate. These losses must be scalars.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the LossNotDecreasing Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: List of strings or a comma-separated string Default value: `None`
`tensor_regex`	A list of regex patterns that is used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: `None`
`use_losses_collection`	If set to `True`, looks for losses in the collection named "losses" when the collection is present. Optional Valid values: Boolean Default value: `True`
`num_steps`	The minimum number of steps after which the rule checks if the loss has decreased. Rule evaluation happens every `num_steps`. The rule compares the loss for this step with the loss at a step which is at least `num_steps` behind the current step. For example, suppose that the loss is being saved every three steps, but `num_steps` is set to 10. At step 21, loss for step 21 is compared with loss for step 9. The next step at which loss is checked is step 33, because ten steps after step 21 is step 31, and at step 31 and step 32 loss is not saved. Optional Valid values: Integer Default value: `10`
`diff_percent`	The minimum percentage difference by which the loss should decrease between `num_steps`. Optional Valid values: `0.0` < float < `100` Default value: `0.1` (in percentage)
`increase_threshold_percent`	The maximum threshold percent that loss is allowed to increase in case loss has been increasing Optional Valid values: `0` < float < `100` Default value: `5` (in percentage)
`mode`	The name of the Debugger mode to query tensor values for rule checking. If this is not passed, the rule checks in order by default for the `mode.EVAL`, then `mode.TRAIN`, and then `mode.GLOBAL`. Optional Valid values: String (`EVAL`, `TRAIN`, or `GLOBAL`) Default value: `GLOBAL`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.loss_not_decreasing(),
        rule_parameters={
                "tensor_regex": ".*",
                "use_losses_collection": "True",
                "num_steps": "10",
                "diff_percent": "0.1",
                "increase_threshold_percent": "5",
                "mode": "GLOBAL"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="losses", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

Overfit

This rule detects if your model is being overfit to the training data by comparing the validation and training losses.

This rule can be applied either to one of the supported deep learning frameworks (TensorFlow, MXNet, and PyTorch) or to the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

A standard way to prevent overfitting is to regularize your model.

Parameter Descriptions for the Overfit Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: None
`start_step`	The step from which to start comparing the validation and training loss. Optional Valid values: Integer Default value: `0`
`patience`	The number of steps for which the `ratio_threshold` is allowed to exceed the value set before the model is considered to be overfit. Optional Valid values: Integer Default value: `1`
`ratio_threshold`	The maximum ratio of the difference between the mean validation loss and mean training loss to the mean training loss. If this threshold is exceeded for a `patience` number of steps, the model is being overfit and the rule returns `True`. Optional Valid values: Float Default value: `0.1`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.overfit(),
        rule_parameters={
                "tensor_regex": ".*",
                "start_step": "0",
                "patience": "1",
                "ratio_threshold": "0.1"
        },
        collections_to_save=[
            CollectionConfig(
                name="losses", 
                parameters={
                    "train.save_interval": "100",
                    "eval.save_interval": "10"
                } 
            )
        ]
    )
]

Overtraining

This rule detects if a model is being overtrained. After a number of training iterations on a well-behaved model (both training and validation loss decrease), the model approaches to a minimum of the loss function and does not improve anymore. If the model continues training it can happen that validation loss starts increasing, because the model starts overfitting. This rule sets up thresholds and conditions to determine if the model is not improving, and prevents overfitting problems due to overtraining.

This rule can be applied either to one of the supported deep learning frameworks (TensorFlow, MXNet, and PyTorch) or to the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Note

Overtraining can be avoided by early stopping. For information on early stopping, see Stop Training Jobs Early. For an example that shows how to use spot training with Debugger, see Enable Spot Training with Amazon SageMaker Debugger.

Parameter Descriptions for the Overtraining Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`patience_train`	The number of steps to wait before the training loss is considered to not to be improving anymore. Optional Valid values: Integer Default value: `5`
`patience_validation`	The number of steps to wait before the validation loss is considered to not to be improving anymore. Optional Valid values: Integer Default value: `10`
`delta`	The minimum threshold by how much the error should improve before it is considered as a new optimum. Optional Valid values: Float Default value: `0.01`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.overtraining(),
        rule_parameters={
                "patience_train": "5",
                "patience_validation": "10",
                "delta": "0.01"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="losses", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

SimilarAcrossRuns

This rule compares tensors gathered from a base trial with tensors from another trial.

This rule can be applied either to one of the supported deep learning frameworks (TensorFlow, MXNet, and PyTorch) or to the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the SimilarAcrossRuns Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`other_trials`	A completed training job name whose tensors you want to compare to those tensors gathered from the current `base_trial`. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: List of strings or a comma-separated string Default value: None
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: None


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.similar_across_runs(),
        rule_parameters={
                "other_trials": "<specify-another-job-name>",
                "collection_names": "losses",
                "tensor_regex": ".*"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="losses", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

StalledTrainingRule

StalledTrainingRule detects if there is no progress made on training job, and stops the training job if the rule fires. This rule requires tensors to be periodically saved in a time interval defined by its threshold parameter. This rule keeps on monitoring for new tensors, and if no new tensor has been emitted for threshold interval rule gets fired.

Parameter Descriptions for the StalledTrainingRule Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`threshold`	A threshold that defines by how much time in seconds the rule waits for a tensor output until it fires a stalled training issue. Default value is 1800 seconds. Optional Valid values: Integer Default value: `1800`
`stop_training_on_fire`	If set to `True`, watches if the base training job outputs tensors in "`threshold`" seconds. Optional Valid values: Boolean Default value: `False`
`training_job_name_prefix`	The prefix of base training job name. If `stop_training_on_fire` is true, the rule searches for SageMaker training jobs with this prefix in the same account. If there is an inactivity found, the rule takes a `StopTrainingJob` action. Note if there are multiple jobs found with same prefix, the rule skips termination. It is important that the prefix is set unique per each training job. Optional Valid values: String


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.stalled_training_rule(),
        rule_parameters={
                "threshold": "1800",
                "stop_training_on_fire": "True",
                "training_job_name_prefix": "<specify-training-base-job-name>"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="losses", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

TensorVariance

This rule detects if you have tensors with very high or low variances. Very high or low variances in a tensor could lead to neuron saturation, which reduces the learning ability of the neural network. Very high variance in tensors can also eventually lead to exploding tensors. Use this rule to detect such issues early.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the TensorVariance Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: List of strings or a comma-separated string Default value: None
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: None
`max_threshold`	The threshold for the upper bound of tensor variance. Optional Valid values: Float Default value: None
`min_threshold`	The threshold for the lower bound of tensor variance. Optional Valid values: Float Default value: None


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.tensor_variance(),
        rule_parameters={
                "collection_names": "weights",
                "max_threshold": "10",
                "min_threshold": "0.00001",
        },
        collections_to_save=[ 
            CollectionConfig(
                name="weights", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

UnchangedTensor

This rule detects whether a tensor is no longer changing across steps.

This rule runs the numpy.allclose method to check if the tensor isn't changing.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the UnchangedTensor Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`collection_names`	The list of collection names whose tensors the rule inspects. Optional Valid values: List of strings or a comma-separated string Default value: None
`tensor_regex`	A list of regex patternsused to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: None
`num_steps`	The number of steps across which the rule checks to determine if the tensor has changed. This checks the last `num_steps` that are available. They don't need to be consecutive. If `num_steps` is 2, at step s it doesn't necessarily check for s-1 and s. If s-1 isn't available, it checks the last available step along with s. In that case, it checks the last available step with the current step. Optional Valid values: Integer Default value: `3`
`rtol`	The relative tolerance parameter to be passed to the `numpy.allclose` method. Optional Valid values: Float Default value: `1e-05`
`atol`	The absolute tolerance parameter to be passed to the `numpy.allclose` method. Optional Valid values: Float Default value: `1e-08`
`equal_nan`	Whether to compare NaNs as equal. If `True`, NaNs in input array a are considered equal to NaNs in input array b in the output array. This parameter is passed to the `numpy.allclose` method. Optional Valid values: Boolean Default value: `False`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.unchanged_tensor(),
        rule_parameters={
                "collection_names": "losses",
                "tensor_regex": "",
                "num_steps": "3",
                "rtol": "1e-05",
                "atol": "1e-08",
                "equal_nan": "False"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="losses", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

CheckInputImages

This rule checks if input images have been correctly normalized. Specifically, it detects if the mean of the sample data differs by more than a threshold value from zero. Many computer vision models require that input data has a zero mean and unit variance.

This rule is applicable to deep learning applications.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the CheckInputImages Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`threshold_mean`	A threshold that defines by how much mean of the input data can differ from 0. Optional Valid values: Float Default value: `0.2`
`threshold_samples`	The number of images that have to be sampled before an error can be thrown. If the value is too low, the estimation of the dataset mean will be inaccurate. Optional Valid values: Integer Default value: `500`
`regex`	The name of the input data tensor. Optional Valid values: String Default value: `".*hybridsequential0_input_0"` (the name of the input tensor for Apache MXNet models using HybridSequential)
`channel`	The position of the color channel in the input tensor shape array. Optional Valid values: Integer Default value: `1` (for example, MXNet expects input data in the form of (batch_size, channel, height, width))


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.check_input_images(),
        rule_parameters={
                "threshold_mean": "0.2",
                "threshold_samples": "500",
                "regex": ".*hybridsequential0_input_0",
                "channel": "1"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="custom_inputs_collection", 
                parameters={
                    "include_regex": ".*hybridsequential0_input_0",
                    "save_interval": "500"
                } 
            )
        ]
    )
]

NLPSequenceRatio

This rule calculates the ratio of specific tokens given the rest of the input sequence that is useful for optimizing performance. For example, you can calculate the percentage of padding end-of-sentence (EOS) tokens in your input sequence. If the number of EOS tokens is too high, an alternate bucketing strategy should be performed. You also can calculate the percentage of unknown tokens in your input sequence. If the number of unknown words is too high, an alternate vocabulary could be used.

This rule is applicable to deep learning applications.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the NLPSequenceRatio Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`tensor_regex`	A list of regex patterns used to restrict this comparison to specific scalar-valued tensors. The rule inspects only the tensors that match the regex patterns specified in the list. If no patterns are passed, the rule compares all tensors gathered in the trials by default. Only scalar-valued tensors can be matched. Optional Valid values: List of strings or a comma-separated string Default value: `".*embedding0_input_0"` (assuming an embedding as the initial layer of the network)
`token_values`	A string of a list of the numerical values of the tokens. For example, "3, 0". Optional Valid values: Comma-separated string of numerical values Default value: `0`
`token_thresholds_percent`	A string of a list of thresholds (in percentages) that correspond to each of the `token_values`. For example,"50.0, 50.0". Optional Valid values: Comma-separated string of floats Default value: `"50"`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.nlp_sequence_ratio(),
        rule_parameters={
                "tensor_regex": ".*embedding0_input_0",
                "token_values": "0",
                "token_thresholds_percent": "50"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="custom_inputs_collection", 
                parameters={
                    "include_regex": ".*embedding0_input_0"
                } 
            )
        ]
    )
]

Confusion

This rule evaluates the goodness of a confusion matrix for a classification problem.

It creates a matrix of size category_no*category_no and populates it with data coming from (labels, predictions) pairs. For each (labels, predictions) pair, the count in confusion[labels][predictions] is incremented by 1. When the matrix is fully populated, the ratio of data on-diagonal values and off-diagonal values are evaluated as follows:

For elements on the diagonal: confusion[i][i]/sum_j(confusion[j][j])>=min_diag
For elements off the diagonal: confusion[j][i])/sum_j(confusion[j][i])<=max_off_diag

This rule can be applied to the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the Confusion Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`category_no`	The number of categories. Optional Valid values: Integer ≥2 Default value: `"None"`
`labels`	The `labels` tensor collection or an 1-d vector of true labels. Optional Valid values: String Default value: `"labels"`
`predictions`	The `predictions` tensor collection or an 1-d vector of estimated labels. Optional Valid values: String Default value: `"predictions"`
`labels_collection`	The rule inspects the tensors in this collection for `labels`. Optional Valid values: String Default value: `"labels"`
`predictions_collection`	The rule inspects the tensors in this collection for `predictions`. Optional Valid values: String Default value: `"predictions"`
`min_diag`	The minimum threshold for the ratio of data on the diagonal. Optional Valid values: `0`≤float≤`1` Default value: `0.9`
`max_off_diag`	The maximum threshold for the ratio of data off the diagonal. Optional Valid values: `0`≤float≤`1` Default value: `0.1`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.confusion(),
        rule_parameters={
                "category_no": "10",
                "labels": "labels",
                "predictions": "predictions",
                "labels_collection": "labels",
                "predictions_collection": "predictions",
                "min_diag": "0.9",
                "max_off_diag": "0.1"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="labels",
                parameters={
                    "save_interval": "500"
                } 
            ),
            CollectionConfig(
                name="predictions",
                parameters={
                    "include_regex": "500"
                } 
            )
        ]
    )
]

Note

This rule infers default values for the optional parameters if their values aren't specified.

FeatureImportanceOverweight

This rule accumulates the weights of the n largest feature importance values per step and ensures that they do not exceed the threshold. For example, you can set the threshold for the top 3 features to not hold more than 80 percent of the total weights of the model.

This rule is valid only for the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the FeatureImportanceOverweight Rule
Parameter Name	Description
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`threshold`	Defines the threshold for the proportion of the cumulative sum of the `n` largest features. The number `n` is defined by the `nfeatures` parameter. Optional Valid values: Float Default value: `0.8`
`nfeatures`	The number of largest features. Optional Valid values: Integer Default value: `3`
`tensor_regex`	Regular expression (regex) of tensor names the rule to analyze. Optional Valid values: String Default value: `".*feature_importance/weight"`


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.feature_importance_overweight(),
        rule_parameters={
                "threshold": "0.8",
                "nfeatures": "3",
                "tensor_regex": ".*feature_importance/weight"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="feature_importance", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

TreeDepth

This rule measures the depth of trees in an XGBoost model. XGBoost rejects splits if they do not improve loss. This regularizes the training. As a result, the tree might not grow as deep as defined by the depth parameter.

This rule is valid only for the XGBoost algorithm.

For an example of how to configure and deploy a built-in rule, see Configure Debugger Built-in Rules.

Parameter Descriptions for the TreeDepth Rule
`base_trial`	The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger. Required Valid values: String
`depth`	The depth of the tree. The depth of the tree is obtained by computing the base 2 logarithm of the largest node ID. Optional Valid values: Float Default value: `4`

Parameter Descriptions for the TreeDepth Rule

Parameter Name Description

base_trial

The base trial training job name. This parameter is automatically set to the current training job by Amazon SageMaker Debugger.

Required

Valid values: String

depth

The depth of the tree. The depth of the tree is obtained by computing the base 2 logarithm of the largest node ID.

Optional

Valid values: Float

Default value: 4


built_in_rules = [
    Rule.sagemaker(
        base_config=rule_configs.tree_depth(),
        rule_parameters={
                "depth": "4"
        },
        collections_to_save=[ 
            CollectionConfig(
                name="tree", 
                parameters={
                    "save_interval": "500"
                } 
            )
        ]
    )
]

Javascript is disabled or is unavailable in your browser.

To use the Amazon Web Services Documentation, Javascript must be enabled. Please refer to your browser's Help pages for instructions.

Visualize Debugger Output Tensors in TensorBoard

Create Custom Rules