Importing an Image into Your Device as an Amazon EC2 AMI - Amazon Snowball Edge Developer Guide
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China.

Importing an Image into Your Device as an Amazon EC2 AMI

Using the Amazon CLI, you can use the Amazon feature VM Import/Export to import images into your Amazon Snowball Edge device as EC2 instances. After you import an image, you register it as an Amazon Machine Image (AMI) and launch it as an Amazon EC2 instance.

Step 1: Prepare the Image

You can either export an image from the Amazon Web Services Cloud using VM Import/Export, or generate the image locally using your choice of virtualization platform. You can also export your image from the Amazon Web Services Cloud.

Note

Be aware of the following limitations when uploading images to a Snowball Edge device.

  • Snow Family devices currently only support importing snapshots that are in the RAW image format.

  • Snow Family devices currently only support importing snapshots with sizes from 1 GB to 1 TB.

When you have the image, you must upload it to Amazon S3 on your device because you can only import images as snapshots from Amazon S3 that are available on your device or cluster. During the importing process, you choose the S3 bucket on your Snowball Edge device to store the image in.

Upload Images to your Amazon S3 Device

Check your S3 buckets:

aws s3 ls --endpoint http://snowball-ip:8080 --profile profile-name

To store your images, Choose the Amazon S3 bucket on your device to import images as snapshots:

aws s3 cp image-path s3://S3-bucket-name --endpoint http://snowball-ip:8080 --profile profile-name

Step 2: Set Up Required Permissions

For the import to be successful, you must set up permissions for VM Import/Export, Amazon EC2, and the user.

Note

The service roles and policies that provide these permissions are located on the Snow Family device.

Permissions Required for VM Import/Export

Before you can start the import process, you must create an IAM role with a trust policy that allows Snowball VM Import/Export to assume the role. Additional permissions are given to the role to allow VM Import/Export to access the image stored in the S3 bucket on the device.

Create a trust policy json file

Following is an example trust policy required to be attached to the role so that VM Import/Export can access the snapshot that needs to be imported from the S3 bucket.

{ "Version":"2012-10-17", "Statement":[ { "Effect":"Allow", "Principal":{ "Service":"vmie.amazonaws.com" }, "Action":"sts:AssumeRole" } ] }

Create a role with the trust policy json file

The role name can be vmimport. You can change it by using the --role-name option in the command:

aws iam create-role --role-name role-name --assume-role-policy-document file:///trust-policy-json-path --profile profile-name --endpoint http://snowball-ip:6078 --region snow

The following is an example output from the create-role command.

{ "Role":{ "AssumeRolePolicyDocument":{ "Version":"2012-10-17", "Statement":[ { "Action":"sts:AssumeRole", "Effect":"Allow", "Principal":{ "Service":"vmie.amazonaws.com" } } ] }, "MaxSessionDuration":3600, "RoleId":"AROACEMGEZDGNBVGY3TQOJQGEZAAAABQBB6NSGNAAAABPSVLTREPY3FPAFOLKJ3", "CreateDate":"2022-04-19T22:17:19.823Z", "RoleName":"vmimport", "Path":"/", "Arn":"arn:aws:iam::123456789012:role/vmimport" } }

Create a policy for the role

The following example policy has the minimum required permissions to access Amazon S3. Change the Amazon S3 bucket name to the one which has your images. You also can use prefixes to further narrow down the location where VM Import/Export can import snapshots from. Create a policy json file like this.

{ "Version":"2012-10-17", "Statement":[ { "Effect":"Allow", "Action":[ "s3:GetBucketLocation", "s3:GetObject", "s3:ListBucket", "s3:GetMetadata" ], "Resource":[ "arn:aws:s3:::import-snapshot-bucket-name", "arn:aws:s3:::import-snapshot-bucket-name/*" ] } ] }

Create a policy with the policy file:

aws iam create-policy --policy-name policy-name --policy-document file:///policy-json-file-path --profile profile-name --endpoint http://snowball-ip:6078 --region snow

The following is an output example from the create-policy command.

{ "Policy":{ "PolicyName":"vmimport-resource-policy", "PolicyId":"ANPACEMGEZDGNBVGY3TQOJQGEZAAAABOOEE3IIHAAAABWZJPI2VW4UUTFEDBC2R", "Arn":"arn:aws:iam::123456789012:policy/vmimport-resource-policy", "Path":"/", "DefaultVersionId":"v1", "AttachmentCount":0, "IsAttachable":true, "CreateDate":"2020-07-25T23:27:35.690000+00:00", "UpdateDate":"2020-07-25T23:27:35.690000+00:00" } }

Attach the policy to the role

Attach a policy to the preceding role and grant permissions to access the required resources. This allows the local VM Import/Export service to download the snapshot from Amazon S3 on the device.

aws iam attach-role-policy --role-name role-name --policy-arn arn:aws:iam::123456789012:policy/policy-name --profile profile-name --endpoint http://snowball-ip:6078 --region snow

Permissions Required by the Caller

In addition to the role for the Snowball Edge VM Import/Export to assume, you also must ensure that the user has the permissions that allow them to pass the role to VMIE. If you use the default root user to perform the import, the root user already has all the permissions required, so you can skip this step, and go to step 3.

Attach the following two IAM permissions to the user account that is doing the import.

  • pass-role

  • get-role

Create a policy for the role

The following is an example policy that allows a user to perform the get-role and pass-role actions for the IAM role.

{ "Version":"2012-10-17", "Statement":[ { "Effect":"Allow", "Action": "iam:GetRole", "Resource":"*" }, { "Sid": "iamPassRole", "Effect": "Allow", "Action": "iam:PassRole", "Resource": "*", "Condition": { "StringEquals": { "iam:PassedToService": "importexport.amazonaws.com" } } } ] }

Create a policy with the policy file:

aws iam create-policy --policy-name policy-name --policy-document file:///policy-json-file-path --profile profile-name --endpoint http://snowball-ip:6078 --region snow

The following is an output example from the create-policy command.

{ "Policy":{ "PolicyName":"caller-policy", "PolicyId":"ANPACEMGEZDGNBVGY3TQOJQGEZAAAABOOOTUOE3AAAAAAPPBEUM7Q7ARPUE53C6R", "Arn":"arn:aws:iam::123456789012:policy/caller-policy", "Path":"/", "DefaultVersionId":"v1", "AttachmentCount":0, "IsAttachable":true, "CreateDate":"2020-07-30T00:58:25.309000+00:00", "UpdateDate":"2020-07-30T00:58:25.309000+00:00" } }

After the policy has been generated, attach the policy to the IAM users that will call the Amazon EC2 API or CLI operation to import the snapshot.

aws iam attach-user-policy --user-name your-user-name --policy-arn arn:aws:iam::123456789012:policy/policy-name --profile profile-name --endpoint http://snowball-ip:6078 --region snow

Permissions Required to Call Amazon EC2 APIs on Your Device

To import a snapshot, the IAM user must have the ec2:ImportSnapshot permissions. If restricting access to the user is not required, you can use the ec2:* permissions to grant full Amazon EC2 access. The following are the permissions that can be granted or restricted for Amazon EC2 on your device. Create a policy file with the content shown:

{ "Version":"2012-10-17", "Statement":[ { "Effect":"Allow", "Action":[ "ec2:ImportSnapshot", "ec2:DescribeImportSnapshotTasks", "ec2:CancelImportTask", "ec2:DescribeSnapshots", "ec2:DeleteSnapshot", "ec2:RegisterImage", "ec2:DescribeImages", "ec2:DeregisterImage" ], "Resource":"*" } ] }

Create a policy with the policy file:

aws iam create-policy --policy-name policy-name --policy-document file:///policy-json-file-path --profile profile-name --endpoint http://snowball-ip:6078 --region snow

The following is an output example from the create-policy command.

{ "Policy": { "PolicyName": "ec2-import.json", "PolicyId": "ANPACEMGEZDGNBVGY3TQOJQGEZAAAABQBGPDQC5AAAAATYN62UNBFYTF5WVCSCZS", "Arn": "arn:aws:iam::123456789012:policy/ec2-import.json", "Path": "/", "DefaultVersionId": "v1", "AttachmentCount": 0, "IsAttachable": true, "CreateDate": "2022-04-21T16:25:53.504000+00:00", "UpdateDate": "2022-04-21T16:25:53.504000+00:00" } }

After the policy has been generated, attach the policy to the IAM users that will call the Amazon EC2 API or CLI operation to import the snapshot.

aws iam attach-user-policy --user-name your-user-name --policy-arn arn:aws:iam::123456789012:policy/policy-name --profile profile-name --endpoint http://snowball-ip:6078 --region snow

Step 3: Import the Snapshot to Amazon S3 on Your Device

The next step is to import your snapshot into the Amazon S3 on your device. The value of S3Bucket should be the bucket which has your image, S3Key should be the image file path in this bucket:

aws ec2 import-snapshot --disk-container "Format=RAW,UserBucket={S3Bucket=bucket-name,S3Key=image-file}" --profile profile-name --endpoint http://snowball-ip:8008 --region snow

For more information, see import-snapshot.

This command doesn't support the following switches.

  • [--client-data value]

  • [--client-token value]

  • [--dry-run]

  • [--no-dry-run]

  • [--encrypted]

  • [--no-encrypted]

  • [--kms-key-id value]

  • [--tag-specifications value]

Example output

{ "ImportTaskId":"s.import-snap-1234567890abc", "SnapshotTaskDetail":{ "DiskImageSize":2.0, "Encrypted":false, "Format":"RAW", "Progress":"3", "Status":"active", "StatusMessage":"pending", "UserBucket":{ "S3Bucket":"bucket", "S3Key":"vmimport/image01" } } }
Note

Snowball Edge currently only allows one active import job to run at a time, per device. To start a new import task, either wait for the current task to finish, or choose another available node in a cluster. You can also choose to cancel the current import if you want. To prevent delays, don't reboot the Snowball Edge device while the import is in progress. If you reboot the device, the import will fail, and progress will be deleted when the device becomes accessible. To check the status of your snapshot import task status, use the following command:

aws ec2 describe-import-snapshot-tasks --import-task-ids id --profile profile-name --endpoint http://snowball-ip:8008 --region snow

Step 4: Register the Snapshot as an AMI

When the snapshot import to the device is successful, you can register it using the register-image command.

Note

You can only register an AMI when all its snapshots are available.

For more information, see register-image.

Example command

aws ec2 register-image \ --name ami-01 \ --description my-ami-01 \ --block-device-mappings "[{\"DeviceName\": \"/dev/sda\",\"Ebs\":{\"Encrypted\":false,\"DeleteOnTermination\":true,\"SnapshotId\":\"snapshot-id\",\"VolumeSize\":30}}]" \ --root-device-name /dev/sda1 \ --profile profile-name \ --endpoint http://snowball-ip:8008 \ --region snow

Following is an example of block device mapping JSON. For more information, see block device mapping.

[ { "DeviceName": "/dev/sda", "Ebs": { "Encrypted": false, "DeleteOnTermination": true, "SnapshotId": "snapshot-id", "VolumeSize": 30 } } ]

Example output

{ "ImageId": "s.ami-8de47d2e397937318" }

Step 5: Launch an instance from the AMI

To launch an instance, see run-instances.

The image-id value is the output of previous registry step:

aws ec2 run-instances --image-id image-id --instance-type instance-type --profile profile-name --endpoint http://snowball-ip:8008 --region snow
{ "Instances":[ { "SourceDestCheck":false, "CpuOptions":{ "CoreCount":1, "ThreadsPerCore":2 }, "InstanceId":"s.i-12345a73123456d1", "EnaSupport":false, "ImageId":"s.ami-1234567890abcdefg", "State":{ "Code":0, "Name":"pending" }, "EbsOptimized":false, "SecurityGroups":[ { "GroupName":"default", "GroupId":"s.sg-1234567890abc" } ], "RootDeviceName":"/dev/sda1", "AmiLaunchIndex":0, "InstanceType":"sbe-c.large" } ], "ReservationId":"s.r-1234567890abc" }

Describe Import Tasks

To see the current state of the import progress, you can run the Amazon EC2 describe-import-snapshot-tasks command. This API supports pagination and filtering on the task-state.

Example command

aws ec2 describe-import-snapshot-tasks --import-task-ids id --profile profile-name --endpoint http://snowball-ip:8008 --region snow

Example output

{ "ImportSnapshotTasks": [ { "ImportTaskId": "s.import-snap-8f6bfd7fc9ead9aca", "SnapshotTaskDetail": { "Description": "Created by AWS-Snowball-VMImport service for s.import-snap-8f6bfd7fc9ead9aca", "DiskImageSize": 8.0, "Encrypted": false, "Format": "RAW", "Progress": "3", "SnapshotId": "s.snap-848a22d7518ad442b", "Status": "active", "StatusMessage": "pending", "UserBucket": { "S3Bucket": "bucket1", "S3Key": "image1" } } } ] }
Note

This API only shows output for tasks that have successfully completed or been marked as deleted within the last 7 days. Filtering only supports Name=task-state, Values=active | deleting | deleted | completed

This command doesn't support the following switches.

  • [--dry-run]

  • [--no-dry-run]

Cancel an Import Task

To cancel an import task, run the cancel-import-task command.

Example command

aws ec2 cancel-import-task --import-task-id import-task-id --profile profile-name --endpoint http://snowball-ip:8008 --region snow

Example output

{ "ImportTaskId": "s.import-snap-8234ef2a01cc3b0c6", "PreviousState": "active", "State": "deleting" }
Note

Only tasks that are not in a completed state can be canceled.

This command doesn't support the following switches.

  • [--dry-run]

  • [--no-dry-run]

Describe Snapshots

After a snapshot is imported, you can use this command to describe it. To filter the snapshots, you can pass in --snapshot-ids with the snapshot ID from the previous import task response. This API supports pagination and filter on volume-id, status, and start-time.

Example command

aws ec2 describe-snapshots --snapshot-ids snapshot-id --profile profile-name --endpoint http://snowball-ip:8008 --region snow

Example output

{ "Snapshots": [ { "Description": "Created by AWS-Snowball-VMImport service for s.import-snap-8f6bfd7fc9ead9aca", "Encrypted": false, "OwnerId": "123456789012", "SnapshotId": "s.snap-848a22d7518ad442b", "StartTime": "2020-07-30T04:31:05.032000+00:00", "State": "completed", "VolumeSize": 8 } ] }

This command doesn't support the following switches.

  • [--restorable-by-user-ids value]

  • [--dry-run]

  • [--no-dry-run]

Delete a Snapshot from Your Device

To remove snapshots that you own and you no longer need, you can use the delete-snapshot command.

Example command

aws ec2 delete-snapshot --snapshot-id snapshot-id --profile profile-name --endpoint http://snowball-ip:8008 --region snow
Note

Snowball Edge does not support deleting snapshots that are in a PENDING state or if it is designated as a root device for an AMI.

This command doesn't support the following switches.

  • [--dry-run]

  • [--no-dry-run]

Deregister an AMI

To deregister AMIs that you no longer need, you can run the deregister-image command. Deregistering an AMI that is in the Pending state is not currently supported.

Example command

aws ec2 deregister-image --image-id image-id --profile profile-name --endpoint http://snowball-ip:8008 --region snow

This command doesn't support the following switches.

  • [--dry-run]

  • [--no-dry-run]