Moving your data to a new gateway

Stop any applications that are writing to the old stored Volume Gateway.

Use the following steps to create a snapshot of your volume, and then wait for the snapshot to complete.

1. Open the Storage Gateway console at https://console.amazonaws.cn/storagegateway/home.

2. In the navigation pane, choose Volumes, and then choose the volume that you want to create the snapshot from.

3. For Actions, choose Create snapshot.

4. In the Create snapshot dialog box, enter a snapshot description, and then choose Create snapshot.

   You can verify that the snapshot was created using the console. If data is still uploading to the volume, wait until the upload is complete before you go to the next step. To see the snapshot status and validate that none are pending, select the snapshot links on the volumes.

Use the following steps to stop the old stored Volume Gateway:

1. In the navigation pane, choose Gateways, and then choose the old stored Volume Gateway that you want to stop. The status of the gateway is Running.

2. For Actions, choose Stop gateway. Verify the ID of the gateway from the dialog box, and then choose Stop gateway.

   While the gateway is stopping, you might see a message that indicates the status of the gateway. When the gateway shuts down, a message and a Start gateway button appear in the Details tab. When the gateway shuts down, the status of the gateway is Shutdown.

3. Shut down the VM using the hypervisor controls.

For more information about stopping a gateway, see Starting and Stopping a Volume Gateway.

Detach the storage disks associated with your stored volumes from the gateway VM. This excludes the root disk of the VM.

Activate a new stored Volume Gateway with a new hypervisor VM image available from the Storage Gateway console at https://console.amazonaws.cn/storagegateway/home.

Attach the physical storage disks that you detached from the old stored Volume Gateway VM in step 5.

To preserve existing data on the disk, use the following steps to create stored volumes.

1. On the Storage Gateway console, choose Create volume.

2. In the Create volume dialog box, select the stored Volume Gateway that you created in step 5.

3. Choose a Disk ID value from the list.

4. For Volume content, select the Preserve existing data on the disk option.

For more information about creating volumes, see Creating a volume.

(Optional) In the Configure CHAP authentication wizard that appears, enter the Initiator name, Initiator secret, and Target secret, and then choose Save.

For more information about working with Challenge-Handshake Authentication Protocol (CHAP) authentication, see Configuring CHAP Authentication for Your iSCSI Targets.

Start the application that writes to your stored volume.

When you have confirmed that your new stored Volume Gateway is working correctly, you can delete the old stored Volume Gateway.

Use the following steps to delete the old stored Volume Gateway:

1. In the navigation pane, choose Gateways, and then choose the old stored Volume Gateway that you want to delete.

2. For Actions, choose Delete gateway.

3. In the confirmation dialog box that appears, select the check box to confirm your deletion. Make sure that the gateway ID listed specifies the old stored Volume Gateway that you want to delete, and then choose Delete.

   

Delete the old gateway VM. For information about deleting a VM, see the documentation for your hypervisor.

Stop any applications that are writing to the old cached Volume Gateway.

Unmount or disconnect iSCSI volumes from any clients that are using them. This helps keep data on those volumes consistent by preventing clients from changing or adding data to those volumes.

Use the following steps to create a snapshot of your volume, and then wait for the snapshot to complete.

1. Open the Storage Gateway console at https://console.amazonaws.cn/storagegateway/home.

2. In the navigation pane, choose Volumes, and then choose the volume that you want to create the snapshot from.

3. For Actions, choose Create snapshot.

4. In the Create snapshot dialog box, enter a snapshot description, and then choose Create snapshot.

   You can verify that the snapshot was created using the console. If data is still uploading to the volume, wait until the upload is complete before you go to the next step. To see the snapshot status and validate that none are pending, select the snapshot links on the volumes.

   For more information about checking volume status in the console, see Understanding Volume Statuses and Transitions. For information about cached volume status, see Understanding Cached Volume Status Transitions .

Use the following steps to stop the old cached Volume Gateway:

1. In the navigation pane, choose Gateways, and then choose the old cached Volume Gateway that you want to stop. The status of the gateway is Running.

2. For Actions, choose Stop gateway. Verify the ID of the gateway from the dialog box, and then choose Stop gateway. Make a note of the gateway ID, as it is needed in a later step.

   While the old gateway is stopping, you might see a message that indicates the status of the gateway. When the old gateway shuts down, a message and a Start gateway button appear in the Details tab. When the gateway shuts down, the status of the gateway is Shutdown.

3. Shut down the old VM using the hypervisor controls. For more information about shutting down an Amazon EC2 instance, see Stopping and starting your instances in the Amazon EC2 User Guide. For more information about shutting down a KVM, VMware, or Hyper-V VM, see your hypervisor documentation.

For more information about stopping a gateway, see Starting and Stopping a Volume Gateway.

Detach all disks, including the root disk, cache disks, and upload buffer disks, from the old gateway VM.

If you are using an Amazon EC2 instance as the VM for your cached Volume Gateway, see Detaching an Amazon EBS volume from a Linux instance in the Amazon EC2 User Guide. For information about detaching disks from a KVM, VMware, or Hyper-V VM, see the documentation for your hypervisor.

Create a new Storage Gateway hypervisor VM instance, but don't activate it as a gateway. For more information about creating a new Storage Gateway hypervisor VM, see Set up a Volume Gateway. This new gateway will assume the identity of the old gateway.

Your new Storage Gateway hypervisor VM instance should use the same network configuration as the old VM. The default network configuration for the gateway is Dynamic Host Configuration Protocol (DHCP). With DHCP, your gateway is automatically assigned an IP address.

If you need to manually configure a static IP address for your new VM, see Configuring Your Gateway Network for more details. If your gateway must use a Socket Secure version 5 (SOCKS5) proxy to connect to the internet, see Routing Your On-Premises Gateway Through a Proxy for more details.

Start the new VM.

Attach the disks that you detached from the old cached Volume Gateway VM in step 5, to the new cached Volume Gateway. Attach them in the same order to the new gateway VM as they are on the old gateway VM.

All disks must make the transition unchanged. Do not change volume sizes, as that will cause metadata to become inconsistent.

Initiate the gateway migration process by connecting to the new VM with a URL that uses the following format.

http://your-VM-IP-address/migrate?gatewayId=your-gateway-ID

You can re-use the same IP address for the new gateway VM as you used for the old gateway VM. Your URL should look similar to the example following.

http://198.51.100.123/migrate?gatewayId=sgw-12345678

Use this URL from a browser, or from the command line using curl, to initiate the migration process.

When the gateway migration process is successfully initiated, you will see the following message:

Successfully imported Storage Gateway information. Please refer to Storage Gateway documentation to perform the next steps to complete the migration.

Detach the old gateway's root disk, whose volume ID you noted in step 5.

Start the gateway.

Use the following steps to start the new cached Volume Gateway:

1. Open the Storage Gateway console at https://console.amazonaws.cn/storagegateway/home.

2. In the navigation pane, choose Gateways and then choose the new gateway you want to start. The status of the gateway is Shutdown.

3. Choose Details, and then choose Start gateway.

For more information about starting a gateway, see Starting and Stopping a Volume Gateway.

Your volumes should now be available to your applications at the new gateway VM's IP address.

Confirm that your volumes are available, and delete the old gateway VM. For information about deleting a VM, see the documentation for your hypervisor.