Troubleshooting Amazon EC2 gateway issues - Amazon Storage Gateway
Gateway activation hasn't occurred after a few momentsCan't find the EC2 gateway instance in the instance listCan't attach a an Amazon EBS volume to the EC2 gateway instanceCan't attach an initiator to a volume target of the EC2 gatewayNo disks available when you try to add storage volumes messageHow to remove a disk allocated as upload buffer space to reduce upload buffer spaceThroughput to or from the EC2 gateway drops to zeroActivating Amazon Web Services Support to help troubleshoot the gatewayConnect to your Amazon EC2 gateway using the serial console
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Amazon S3 File Gateway documentation has been moved to What is Amazon S3 File Gateway?

Amazon FSx File Gateway documentation has been moved to What is Amazon FSx File Gateway?

Tape Gateway documentation has been moved to What is Tape Gateway?

Troubleshooting Amazon EC2 gateway issues

In the following sections, you can find typical issues that you might encounter working with your gateway deployed on Amazon EC2. For more information about the difference between an on-premises gateway and a gateway deployed in Amazon EC2, see Deploying an Amazon EC2 instance to host your Volume Gateway.

Your gateway activation hasn't occurred after a few moments

Check the following in the Amazon EC2 console:

  • Port 80 is activated in the security group that you associated with the instance. For more information about adding a security group rule, see Adding a security group rule in the Amazon EC2 User Guide for Linux Instances.

  • The gateway instance is marked as running. In the Amazon EC2 console, the State value for the instance should be RUNNING.

  • Make sure that your Amazon EC2 instance type meets the minimum requirements, as described in Storage requirements.

After correcting the problem, try activating the gateway again. To do this, open the Storage Gateway console, choose Deploy a new Gateway on Amazon EC2, and re-enter the IP address of the instance.

You can't find your EC2 gateway instance in the instance list

If you didn't give your instance a resource tag and you have many instances running, it can be hard to tell which instance you launched. In this case, you can take the following actions to find the gateway instance:

  • Check the name of the Amazon Machine Image (AMI) on the Description tab of the instance. An instance based on the Storage Gateway AMI should start with the text aws-storage-gateway-ami.

  • If you have several instances based on the Storage Gateway AMI, check the instance launch time to find the correct instance.

You created an Amazon EBS volume but can't attach it to your EC2 gateway instance

Check that the Amazon EBS volume in question is in the same Availability Zone as the gateway instance. If there is a discrepancy in Availability Zones, create a new Amazon EBS volume in the same Availability Zone as your instance.

You can't attach an initiator to a volume target of your EC2 gateway

Check that the security group that you launched the instance with includes a rule that allows the port that you are using for iSCSI access. The port is usually set as 3260. For more information on connecting to volumes, see Connecting to Your Volumes to a Windows Client.

You get a message that you have no disks available when you try to add storage volumes

For a newly activated gateway, no volume storage is defined. Before you can define volume storage, you must allocate local disks to the gateway to use as an upload buffer and cache storage. For a gateway deployed to Amazon EC2, the local disks are Amazon EBS volumes attached to the instance. This error message likely occurs because no Amazon EBS volumes are defined for the instance.

Check block devices defined for the instance that is running the gateway. If there are only two block devices (the default devices that come with the AMI), then you should add storage. For more information on doing so, see Deploying an Amazon EC2 instance to host your Volume Gateway. After attaching two or more Amazon EBS volumes, try creating volume storage on the gateway.

You want to remove a disk allocated as upload buffer space to reduce upload buffer space

Follow the steps in Determining the size of upload buffer to allocate.

Throughput to or from your EC2 gateway drops to zero

Verify that the gateway instance is running. If the instance is starting due to a reboot, for example, wait for the instance to restart.

Also, verify that the gateway IP has not changed. If the instance was stopped and then restarted, the IP address of the instance might have changed. In this case, you need to activate a new gateway.

You can view the throughput to and from your gateway from the Amazon CloudWatch console. For more information about measuring throughput to and from your gateway and Amazon, see Measuring Performance Between Your Gateway and Amazon.

You want Amazon Web Services Support to help troubleshoot your EC2 gateway

Storage Gateway provides a local console you can use to perform several maintenance tasks, including activating Amazon Web Services Support to access your gateway to assist you with troubleshooting gateway issues. By default, Amazon Web Services Support access to your gateway is deactivated. You provide this access through the Amazon EC2 local console. You log in to the Amazon EC2 local console through a Secure Shell (SSH). To successfully log in through SSH, your instance's security group must have a rule that opens TCP port 22.

Note

If you add a new rule to an existing security group, the new rule applies to all instances that use that security group. For more information about security groups and how to add a security group rule, see Amazon EC2 security groups in the Amazon EC2 User Guide.

To let Amazon Web Services Support connect to your gateway, you first log in to the local console for the Amazon EC2 instance, navigate to the Storage Gateway's console, and then provide the access.

To activate Amazon Web Services Support access to a gateway deployed on an Amazon EC2 instance

  1. Log in to the local console for your Amazon EC2 instance. For instructions, go to Connect to your instance in the Amazon EC2 User Guide.

    You can use the following command to log in to the EC2 instance's local console.

    ssh –i PRIVATE-KEY admin@INSTANCE-PUBLIC-DNS-NAME
    Note

    The PRIVATE-KEY is the .pem file containing the private certificate of the EC2 key pair that you used to launch the Amazon EC2 instance. For more information, see Retrieving the public key for your key pair in the Amazon EC2 User Guide.

    The INSTANCE-PUBLIC-DNS-NAME is the public Domain Name System (DNS) name of your Amazon EC2 instance that your gateway is running on. You obtain this public DNS name by selecting the Amazon EC2 instance in the EC2 console and clicking the Description tab.

  2. At the prompt, enter 6 - Command Prompt to open the Amazon Web Services Support Channel console.

  3. Enter h to open the AVAILABLE COMMANDS window.

  4. Do one of the following:

    • If your gateway is using a public endpoint, in the AVAILABLE COMMANDS window, enter open-support-channel to connect to customer support for Storage Gateway. Allow TCP port 22 so you can open a support channel to Amazon. When you connect to customer support, Storage Gateway assigns you a support number. Make a note of your support number.

    • If your gateway is using a VPC endpoint, in the AVAILABLE COMMANDS window, enter open-support-channel. If your gateway is not activated, provide the VPC endpoint or IP address to connect to customer support for Storage Gateway. Allow TCP port 22 so you can open a support channel to Amazon. When you connect to customer support, Storage Gateway assigns you a support number. Make a note of your support number.

    Note

    The channel number is not a Transmission Control Protocol/User Datagram Protocol (TCP/UDP) port number. Instead, the gateway makes a Secure Shell (SSH) (TCP 22) connection to Storage Gateway servers and provides the support channel for the connection.

  5. After the support channel is established, provide your support service number to Amazon Web Services Support so Amazon Web Services Support can provide troubleshooting assistance.

  6. When the support session is completed, enter q to end it. Don't close the session until Amazon Web Services Support notifies you that the support session is complete.

  7. Enter exit to exit the Storage Gateway console.

  8. Follow the console menus to log out of the Storage Gateway instance.

You want to connect to your gateway instance using the Amazon EC2 serial console

You can use the Amazon EC2 serial console to troubleshoot boot, network configuration, and other issues. For instructions and troubleshooting tips, see Amazon EC2 Serial Console in the Amazon Elastic Compute Cloud User Guide.