Class: Aws::EventBridge::Client
- Inherits:
-
Seahorse::Client::Base
- Object
- Seahorse::Client::Base
- Aws::EventBridge::Client
- Includes:
- ClientStubs
- Defined in:
- gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb
Overview
An API client for EventBridge. To construct a client, you need to configure a :region
and :credentials
.
client = Aws::EventBridge::Client.new(
region: region_name,
credentials: credentials,
# ...
)
For details on configuring region and credentials see the developer guide.
See #initialize for a full list of supported configuration options.
Instance Attribute Summary
Attributes inherited from Seahorse::Client::Base
API Operations collapse
-
#activate_event_source(params = {}) ⇒ Struct
Activates a partner event source that has been deactivated.
-
#cancel_replay(params = {}) ⇒ Types::CancelReplayResponse
Cancels the specified replay.
-
#create_api_destination(params = {}) ⇒ Types::CreateApiDestinationResponse
Creates an API destination, which is an HTTP invocation endpoint configured as a target for events.
-
#create_archive(params = {}) ⇒ Types::CreateArchiveResponse
Creates an archive of events with the specified settings.
-
#create_connection(params = {}) ⇒ Types::CreateConnectionResponse
Creates a connection.
-
#create_endpoint(params = {}) ⇒ Types::CreateEndpointResponse
Creates a global endpoint.
-
#create_event_bus(params = {}) ⇒ Types::CreateEventBusResponse
Creates a new event bus within your account.
-
#create_partner_event_source(params = {}) ⇒ Types::CreatePartnerEventSourceResponse
Called by an SaaS partner to create a partner event source.
-
#deactivate_event_source(params = {}) ⇒ Struct
You can use this operation to temporarily stop receiving events from the specified partner event source.
-
#deauthorize_connection(params = {}) ⇒ Types::DeauthorizeConnectionResponse
Removes all authorization parameters from the connection.
-
#delete_api_destination(params = {}) ⇒ Struct
Deletes the specified API destination.
-
#delete_archive(params = {}) ⇒ Struct
Deletes the specified archive.
-
#delete_connection(params = {}) ⇒ Types::DeleteConnectionResponse
Deletes a connection.
-
#delete_endpoint(params = {}) ⇒ Struct
Delete an existing global endpoint.
-
#delete_event_bus(params = {}) ⇒ Struct
Deletes the specified custom event bus or partner event bus.
-
#delete_partner_event_source(params = {}) ⇒ Struct
This operation is used by SaaS partners to delete a partner event source.
-
#delete_rule(params = {}) ⇒ Struct
Deletes the specified rule.
-
#describe_api_destination(params = {}) ⇒ Types::DescribeApiDestinationResponse
Retrieves details about an API destination.
-
#describe_archive(params = {}) ⇒ Types::DescribeArchiveResponse
Retrieves details about an archive.
-
#describe_connection(params = {}) ⇒ Types::DescribeConnectionResponse
Retrieves details about a connection.
-
#describe_endpoint(params = {}) ⇒ Types::DescribeEndpointResponse
Get the information about an existing global endpoint.
-
#describe_event_bus(params = {}) ⇒ Types::DescribeEventBusResponse
Displays details about an event bus in your account.
-
#describe_event_source(params = {}) ⇒ Types::DescribeEventSourceResponse
This operation lists details about a partner event source that is shared with your account.
-
#describe_partner_event_source(params = {}) ⇒ Types::DescribePartnerEventSourceResponse
An SaaS partner can use this operation to list details about a partner event source that they have created.
-
#describe_replay(params = {}) ⇒ Types::DescribeReplayResponse
Retrieves details about a replay.
-
#describe_rule(params = {}) ⇒ Types::DescribeRuleResponse
Describes the specified rule.
-
#disable_rule(params = {}) ⇒ Struct
Disables the specified rule.
-
#enable_rule(params = {}) ⇒ Struct
Enables the specified rule.
-
#list_api_destinations(params = {}) ⇒ Types::ListApiDestinationsResponse
Retrieves a list of API destination in the account in the current Region.
-
#list_archives(params = {}) ⇒ Types::ListArchivesResponse
Lists your archives.
-
#list_connections(params = {}) ⇒ Types::ListConnectionsResponse
Retrieves a list of connections from the account.
-
#list_endpoints(params = {}) ⇒ Types::ListEndpointsResponse
List the global endpoints associated with this account.
-
#list_event_buses(params = {}) ⇒ Types::ListEventBusesResponse
Lists all the event buses in your account, including the default event bus, custom event buses, and partner event buses.
-
#list_event_sources(params = {}) ⇒ Types::ListEventSourcesResponse
You can use this to see all the partner event sources that have been shared with your Amazon Web Services account.
-
#list_partner_event_source_accounts(params = {}) ⇒ Types::ListPartnerEventSourceAccountsResponse
An SaaS partner can use this operation to display the Amazon Web Services account ID that a particular partner event source name is associated with.
-
#list_partner_event_sources(params = {}) ⇒ Types::ListPartnerEventSourcesResponse
An SaaS partner can use this operation to list all the partner event source names that they have created.
-
#list_replays(params = {}) ⇒ Types::ListReplaysResponse
Lists your replays.
-
#list_rule_names_by_target(params = {}) ⇒ Types::ListRuleNamesByTargetResponse
Lists the rules for the specified target.
-
#list_rules(params = {}) ⇒ Types::ListRulesResponse
Lists your Amazon EventBridge rules.
-
#list_tags_for_resource(params = {}) ⇒ Types::ListTagsForResourceResponse
Displays the tags associated with an EventBridge resource.
-
#list_targets_by_rule(params = {}) ⇒ Types::ListTargetsByRuleResponse
Lists the targets assigned to the specified rule.
-
#put_events(params = {}) ⇒ Types::PutEventsResponse
Sends custom events to Amazon EventBridge so that they can be matched to rules.
-
#put_partner_events(params = {}) ⇒ Types::PutPartnerEventsResponse
This is used by SaaS partners to write events to a customer's partner event bus.
-
#put_permission(params = {}) ⇒ Struct
Running
PutPermission
permits the specified Amazon Web Services account or Amazon Web Services organization to put events to the specified event bus. -
#put_rule(params = {}) ⇒ Types::PutRuleResponse
Creates or updates the specified rule.
-
#put_targets(params = {}) ⇒ Types::PutTargetsResponse
Adds the specified targets to the specified rule, or updates the targets if they are already associated with the rule.
-
#remove_permission(params = {}) ⇒ Struct
Revokes the permission of another Amazon Web Services account to be able to put events to the specified event bus.
-
#remove_targets(params = {}) ⇒ Types::RemoveTargetsResponse
Removes the specified targets from the specified rule.
-
#start_replay(params = {}) ⇒ Types::StartReplayResponse
Starts the specified replay.
-
#tag_resource(params = {}) ⇒ Struct
Assigns one or more tags (key-value pairs) to the specified EventBridge resource.
-
#test_event_pattern(params = {}) ⇒ Types::TestEventPatternResponse
Tests whether the specified event pattern matches the provided event.
-
#untag_resource(params = {}) ⇒ Struct
Removes one or more tags from the specified EventBridge resource.
-
#update_api_destination(params = {}) ⇒ Types::UpdateApiDestinationResponse
Updates an API destination.
-
#update_archive(params = {}) ⇒ Types::UpdateArchiveResponse
Updates the specified archive.
-
#update_connection(params = {}) ⇒ Types::UpdateConnectionResponse
Updates settings for a connection.
-
#update_endpoint(params = {}) ⇒ Types::UpdateEndpointResponse
Update an existing endpoint.
Instance Method Summary collapse
-
#initialize(options) ⇒ Client
constructor
A new instance of Client.
Methods included from ClientStubs
#api_requests, #stub_data, #stub_responses
Methods inherited from Seahorse::Client::Base
add_plugin, api, clear_plugins, define, new, #operation_names, plugins, remove_plugin, set_api, set_plugins
Methods included from Seahorse::Client::HandlerBuilder
#handle, #handle_request, #handle_response
Constructor Details
#initialize(options) ⇒ Client
Returns a new instance of Client.
419 420 421 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 419 def initialize(*args) super end |
Instance Method Details
#activate_event_source(params = {}) ⇒ Struct
Activates a partner event source that has been deactivated. Once activated, your matching event bus will start receiving events from the event source.
444 445 446 447 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 444 def activate_event_source(params = {}, = {}) req = build_request(:activate_event_source, params) req.send_request() end |
#cancel_replay(params = {}) ⇒ Types::CancelReplayResponse
Cancels the specified replay.
476 477 478 479 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 476 def cancel_replay(params = {}, = {}) req = build_request(:cancel_replay, params) req.send_request() end |
#create_api_destination(params = {}) ⇒ Types::CreateApiDestinationResponse
Creates an API destination, which is an HTTP invocation endpoint configured as a target for events.
API destinations do not support private destinations, such as interface VPC endpoints.
For more information, see API destinations in the EventBridge User Guide.
544 545 546 547 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 544 def create_api_destination(params = {}, = {}) req = build_request(:create_api_destination, params) req.send_request() end |
#create_archive(params = {}) ⇒ Types::CreateArchiveResponse
Creates an archive of events with the specified settings. When you create an archive, incoming events might not immediately start being sent to the archive. Allow a short period of time for changes to take effect. If you do not specify a pattern to filter events sent to the archive, all events are sent to the archive except replayed events. Replayed events are not sent to an archive.
600 601 602 603 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 600 def create_archive(params = {}, = {}) req = build_request(:create_archive, params) req.send_request() end |
#create_connection(params = {}) ⇒ Types::CreateConnectionResponse
Creates a connection. A connection defines the authorization type and credentials to use for authorization with an API destination HTTP endpoint.
716 717 718 719 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 716 def create_connection(params = {}, = {}) req = build_request(:create_connection, params) req.send_request() end |
#create_endpoint(params = {}) ⇒ Types::CreateEndpointResponse
Creates a global endpoint. Global endpoints improve your application's availability by making it regional-fault tolerant. To do this, you define a primary and secondary Region with event buses in each Region. You also create a Amazon Route 53 health check that will tell EventBridge to route events to the secondary Region when an "unhealthy" state is encountered and events will be routed back to the primary Region when the health check reports a "healthy" state.
806 807 808 809 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 806 def create_endpoint(params = {}, = {}) req = build_request(:create_endpoint, params) req.send_request() end |
#create_event_bus(params = {}) ⇒ Types::CreateEventBusResponse
Creates a new event bus within your account. This can be a custom event bus which you can use to receive events from your custom applications and services, or it can be a partner event bus which can be matched to a partner event source.
859 860 861 862 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 859 def create_event_bus(params = {}, = {}) req = build_request(:create_event_bus, params) req.send_request() end |
#create_partner_event_source(params = {}) ⇒ Types::CreatePartnerEventSourceResponse
Called by an SaaS partner to create a partner event source. This operation is not used by Amazon Web Services customers.
Each partner event source can be used by one Amazon Web Services account to create a matching partner event bus in that Amazon Web Services account. A SaaS partner must create one partner event source for each Amazon Web Services account that wants to receive those event types.
A partner event source creates events based on resources within the SaaS partner's service or application.
An Amazon Web Services account that creates a partner event bus that matches the partner event source can use that event bus to receive events from the partner, and then process them using Amazon Web Services Events rules and targets.
Partner event source names follow this format:
partner_name/event_namespace/event_name
partner_name is determined during partner registration, and identifies the partner to Amazon Web Services customers.
event_namespace is determined by the partner, and is a way for the partner to categorize their events.
event_name is determined by the partner, and should uniquely identify an event-generating resource within the partner system.
The event_name must be unique across all Amazon Web Services customers. This is because the event source is a shared resource between the partner and customer accounts, and each partner event source unique in the partner account.
The combination of event_namespace and event_name should help Amazon Web Services customers decide whether to create an event bus to receive these events.
933 934 935 936 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 933 def create_partner_event_source(params = {}, = {}) req = build_request(:create_partner_event_source, params) req.send_request() end |
#deactivate_event_source(params = {}) ⇒ Struct
You can use this operation to temporarily stop receiving events from the specified partner event source. The matching event bus is not deleted.
When you deactivate a partner event source, the source goes into PENDING state. If it remains in PENDING state for more than two weeks, it is deleted.
To activate a deactivated partner event source, use ActivateEventSource.
968 969 970 971 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 968 def deactivate_event_source(params = {}, = {}) req = build_request(:deactivate_event_source, params) req.send_request() end |
#deauthorize_connection(params = {}) ⇒ Types::DeauthorizeConnectionResponse
Removes all authorization parameters from the connection. This lets you remove the secret from the connection so you can reuse it without having to create a new connection.
1006 1007 1008 1009 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1006 def (params = {}, = {}) req = build_request(:deauthorize_connection, params) req.send_request() end |
#delete_api_destination(params = {}) ⇒ Struct
Deletes the specified API destination.
1028 1029 1030 1031 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1028 def delete_api_destination(params = {}, = {}) req = build_request(:delete_api_destination, params) req.send_request() end |
#delete_archive(params = {}) ⇒ Struct
Deletes the specified archive.
1050 1051 1052 1053 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1050 def delete_archive(params = {}, = {}) req = build_request(:delete_archive, params) req.send_request() end |
#delete_connection(params = {}) ⇒ Types::DeleteConnectionResponse
Deletes a connection.
1086 1087 1088 1089 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1086 def delete_connection(params = {}, = {}) req = build_request(:delete_connection, params) req.send_request() end |
#delete_endpoint(params = {}) ⇒ Struct
Delete an existing global endpoint. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
1116 1117 1118 1119 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1116 def delete_endpoint(params = {}, = {}) req = build_request(:delete_endpoint, params) req.send_request() end |
#delete_event_bus(params = {}) ⇒ Struct
Deletes the specified custom event bus or partner event bus. All rules associated with this event bus need to be deleted. You can't delete your account's default event bus.
1140 1141 1142 1143 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1140 def delete_event_bus(params = {}, = {}) req = build_request(:delete_event_bus, params) req.send_request() end |
#delete_partner_event_source(params = {}) ⇒ Struct
This operation is used by SaaS partners to delete a partner event source. This operation is not used by Amazon Web Services customers.
When you delete an event source, the status of the corresponding partner event bus in the Amazon Web Services customer account becomes DELETED.
1172 1173 1174 1175 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1172 def delete_partner_event_source(params = {}, = {}) req = build_request(:delete_partner_event_source, params) req.send_request() end |
#delete_rule(params = {}) ⇒ Struct
Deletes the specified rule.
Before you can delete the rule, you must remove all targets, using RemoveTargets.
When you delete a rule, incoming events might continue to match to the deleted rule. Allow a short period of time for changes to take effect.
If you call delete rule multiple times for the same rule, all calls
will succeed. When you call delete rule for a non-existent custom
eventbus, ResourceNotFoundException
is returned.
Managed rules are rules created and managed by another Amazon Web
Services service on your behalf. These rules are created by those
other Amazon Web Services services to support functionality in those
services. You can delete these rules using the Force
option, but you
should do so only if you are sure the other service is not still using
that rule.
1228 1229 1230 1231 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1228 def delete_rule(params = {}, = {}) req = build_request(:delete_rule, params) req.send_request() end |
#describe_api_destination(params = {}) ⇒ Types::DescribeApiDestinationResponse
Retrieves details about an API destination.
1274 1275 1276 1277 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1274 def describe_api_destination(params = {}, = {}) req = build_request(:describe_api_destination, params) req.send_request() end |
#describe_archive(params = {}) ⇒ Types::DescribeArchiveResponse
Retrieves details about an archive.
1322 1323 1324 1325 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1322 def describe_archive(params = {}, = {}) req = build_request(:describe_archive, params) req.send_request() end |
#describe_connection(params = {}) ⇒ Types::DescribeConnectionResponse
Retrieves details about a connection.
1398 1399 1400 1401 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1398 def describe_connection(params = {}, = {}) req = build_request(:describe_connection, params) req.send_request() end |
#describe_endpoint(params = {}) ⇒ Types::DescribeEndpointResponse
Get the information about an existing global endpoint. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
1465 1466 1467 1468 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1465 def describe_endpoint(params = {}, = {}) req = build_request(:describe_endpoint, params) req.send_request() end |
#describe_event_bus(params = {}) ⇒ Types::DescribeEventBusResponse
Displays details about an event bus in your account. This can include the external Amazon Web Services accounts that are permitted to write events to your default event bus, and the associated policy. For custom event buses and partner event buses, it displays the name, ARN, policy, state, and creation time.
To enable your account to receive events from other accounts on its default event bus, use PutPermission.
For more information about partner event buses, see CreateEventBus.
1513 1514 1515 1516 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1513 def describe_event_bus(params = {}, = {}) req = build_request(:describe_event_bus, params) req.send_request() end |
#describe_event_source(params = {}) ⇒ Types::DescribeEventSourceResponse
This operation lists details about a partner event source that is shared with your account.
1552 1553 1554 1555 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1552 def describe_event_source(params = {}, = {}) req = build_request(:describe_event_source, params) req.send_request() end |
#describe_partner_event_source(params = {}) ⇒ Types::DescribePartnerEventSourceResponse
An SaaS partner can use this operation to list details about a partner event source that they have created. Amazon Web Services customers do not use this operation. Instead, Amazon Web Services customers can use DescribeEventSource to see details about a partner event source that is shared with them.
1590 1591 1592 1593 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1590 def describe_partner_event_source(params = {}, = {}) req = build_request(:describe_partner_event_source, params) req.send_request() end |
#describe_replay(params = {}) ⇒ Types::DescribeReplayResponse
Retrieves details about a replay. Use DescribeReplay
to determine
the progress of a running replay. A replay processes events to replay
based on the time in the event, and replays them using 1 minute
intervals. If you use StartReplay
and specify an EventStartTime
and an EventEndTime
that covers a 20 minute time range, the events
are replayed from the first minute of that 20 minute range first. Then
the events from the second minute are replayed. You can use
DescribeReplay
to determine the progress of a replay. The value
returned for EventLastReplayedTime
indicates the time within the
specified time range associated with the last event replayed.
1651 1652 1653 1654 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1651 def describe_replay(params = {}, = {}) req = build_request(:describe_replay, params) req.send_request() end |
#describe_rule(params = {}) ⇒ Types::DescribeRuleResponse
Describes the specified rule.
DescribeRule does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
1709 1710 1711 1712 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1709 def describe_rule(params = {}, = {}) req = build_request(:describe_rule, params) req.send_request() end |
#disable_rule(params = {}) ⇒ Struct
Disables the specified rule. A disabled rule won't match any events, and won't self-trigger if it has a schedule expression.
When you disable a rule, incoming events might continue to match to the disabled rule. Allow a short period of time for changes to take effect.
1741 1742 1743 1744 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1741 def disable_rule(params = {}, = {}) req = build_request(:disable_rule, params) req.send_request() end |
#enable_rule(params = {}) ⇒ Struct
Enables the specified rule. If the rule does not exist, the operation fails.
When you enable a rule, incoming events might not immediately start matching to a newly enabled rule. Allow a short period of time for changes to take effect.
1773 1774 1775 1776 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1773 def enable_rule(params = {}, = {}) req = build_request(:enable_rule, params) req.send_request() end |
#list_api_destinations(params = {}) ⇒ Types::ListApiDestinationsResponse
Retrieves a list of API destination in the account in the current Region.
1827 1828 1829 1830 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1827 def list_api_destinations(params = {}, = {}) req = build_request(:list_api_destinations, params) req.send_request() end |
#list_archives(params = {}) ⇒ Types::ListArchivesResponse
Lists your archives. You can either list all the archives or you can provide a prefix to match to the archive names. Filter parameters are exclusive.
1885 1886 1887 1888 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1885 def list_archives(params = {}, = {}) req = build_request(:list_archives, params) req.send_request() end |
#list_connections(params = {}) ⇒ Types::ListConnectionsResponse
Retrieves a list of connections from the account.
1937 1938 1939 1940 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 1937 def list_connections(params = {}, = {}) req = build_request(:list_connections, params) req.send_request() end |
#list_endpoints(params = {}) ⇒ Types::ListEndpointsResponse
List the global endpoints associated with this account. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
2009 2010 2011 2012 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2009 def list_endpoints(params = {}, = {}) req = build_request(:list_endpoints, params) req.send_request() end |
#list_event_buses(params = {}) ⇒ Types::ListEventBusesResponse
Lists all the event buses in your account, including the default event bus, custom event buses, and partner event buses.
2055 2056 2057 2058 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2055 def list_event_buses(params = {}, = {}) req = build_request(:list_event_buses, params) req.send_request() end |
#list_event_sources(params = {}) ⇒ Types::ListEventSourcesResponse
You can use this to see all the partner event sources that have been shared with your Amazon Web Services account. For more information about partner event sources, see CreateEventBus.
2109 2110 2111 2112 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2109 def list_event_sources(params = {}, = {}) req = build_request(:list_event_sources, params) req.send_request() end |
#list_partner_event_source_accounts(params = {}) ⇒ Types::ListPartnerEventSourceAccountsResponse
An SaaS partner can use this operation to display the Amazon Web Services account ID that a particular partner event source name is associated with. This operation is not used by Amazon Web Services customers.
2158 2159 2160 2161 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2158 def list_partner_event_source_accounts(params = {}, = {}) req = build_request(:list_partner_event_source_accounts, params) req.send_request() end |
#list_partner_event_sources(params = {}) ⇒ Types::ListPartnerEventSourcesResponse
An SaaS partner can use this operation to list all the partner event source names that they have created. This operation is not used by Amazon Web Services customers.
2204 2205 2206 2207 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2204 def list_partner_event_sources(params = {}, = {}) req = build_request(:list_partner_event_sources, params) req.send_request() end |
#list_replays(params = {}) ⇒ Types::ListReplaysResponse
Lists your replays. You can either list all the replays or you can provide a prefix to match to the replay names. Filter parameters are exclusive.
2263 2264 2265 2266 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2263 def list_replays(params = {}, = {}) req = build_request(:list_replays, params) req.send_request() end |
#list_rule_names_by_target(params = {}) ⇒ Types::ListRuleNamesByTargetResponse
Lists the rules for the specified target. You can see which of the rules in Amazon EventBridge can invoke a specific target in your account.
The maximum number of results per page for requests is 100.
2312 2313 2314 2315 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2312 def list_rule_names_by_target(params = {}, = {}) req = build_request(:list_rule_names_by_target, params) req.send_request() end |
#list_rules(params = {}) ⇒ Types::ListRulesResponse
Lists your Amazon EventBridge rules. You can either list all the rules or you can provide a prefix to match to the rule names.
The maximum number of results per page for requests is 100.
ListRules does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
2375 2376 2377 2378 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2375 def list_rules(params = {}, = {}) req = build_request(:list_rules, params) req.send_request() end |
#list_tags_for_resource(params = {}) ⇒ Types::ListTagsForResourceResponse
Displays the tags associated with an EventBridge resource. In EventBridge, rules and event buses can be tagged.
2406 2407 2408 2409 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2406 def (params = {}, = {}) req = build_request(:list_tags_for_resource, params) req.send_request() end |
#list_targets_by_rule(params = {}) ⇒ Types::ListTargetsByRuleResponse
Lists the targets assigned to the specified rule.
The maximum number of results per page for requests is 100.
2518 2519 2520 2521 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2518 def list_targets_by_rule(params = {}, = {}) req = build_request(:list_targets_by_rule, params) req.send_request() end |
#put_events(params = {}) ⇒ Types::PutEventsResponse
Sends custom events to Amazon EventBridge so that they can be matched to rules.
The maximum size for a PutEvents event entry is 256 KB. Entry size is calculated including the event and any necessary characters and keys of the JSON representation of the event. To learn more, see Calculating PutEvents event entry size in the Amazon EventBridge User Guide
PutEvents accepts the data in JSON format. For the JSON number (integer) data type, the constraints are: a minimum value of -9,223,372,036,854,775,808 and a maximum value of 9,223,372,036,854,775,807.
2591 2592 2593 2594 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2591 def put_events(params = {}, = {}) req = build_request(:put_events, params) req.send_request() end |
#put_partner_events(params = {}) ⇒ Types::PutPartnerEventsResponse
This is used by SaaS partners to write events to a customer's partner event bus. Amazon Web Services customers do not use this operation.
For information on calculating event batch size, see Calculating EventBridge PutEvents event entry size in the EventBridge User Guide.
2641 2642 2643 2644 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2641 def put_partner_events(params = {}, = {}) req = build_request(:put_partner_events, params) req.send_request() end |
#put_permission(params = {}) ⇒ Struct
Running PutPermission
permits the specified Amazon Web Services
account or Amazon Web Services organization to put events to the
specified event bus. Amazon EventBridge (CloudWatch Events) rules in
your account are triggered by these events arriving to an event bus in
your account.
For another account to send events to your account, that external account must have an EventBridge rule with your account's event bus as a target.
To enable multiple Amazon Web Services accounts to put events to your
event bus, run PutPermission
once for each of these accounts. Or, if
all the accounts are members of the same Amazon Web Services
organization, you can run PutPermission
once specifying Principal
as "*" and specifying the Amazon Web Services organization ID in
Condition
, to grant permissions to all accounts in that
organization.
If you grant permissions using an organization, then accounts in that
organization must specify a RoleArn
with proper permissions when
they use PutTarget
to add your account's event bus as a target. For
more information, see Sending and Receiving Events Between Amazon Web
Services Accounts in the Amazon EventBridge User Guide.
The permission policy on the event bus cannot exceed 10 KB in size.
2754 2755 2756 2757 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2754 def (params = {}, = {}) req = build_request(:put_permission, params) req.send_request() end |
#put_rule(params = {}) ⇒ Types::PutRuleResponse
Creates or updates the specified rule. Rules are enabled by default, or based on value of the state. You can disable a rule using DisableRule.
A single rule watches for events from a single event bus. Events generated by Amazon Web Services services go to your account's default event bus. Events generated by SaaS partner services or applications go to the matching partner event bus. If you have custom applications or services, you can specify whether their events go to your default event bus or a custom event bus that you have created. For more information, see CreateEventBus.
If you are updating an existing rule, the rule is replaced with what
you specify in this PutRule
command. If you omit arguments in
PutRule
, the old values for those arguments are not kept. Instead,
they are replaced with null values.
When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Allow a short period of time for changes to take effect.
A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule triggers on matching events as well as on a schedule.
When you initially create a rule, you can optionally assign one or
more tags to the rule. Tags can help you organize and categorize your
resources. You can also use them to scope user permissions, by
granting a user permission to access or change only rules with certain
tag values. To use the PutRule
operation and assign tags, you must
have both the events:PutRule
and events:TagResource
permissions.
If you are updating an existing rule, any tags you specify in the
PutRule
operation are ignored. To update the tags of an existing
rule, use TagResource and UntagResource.
Most services in Amazon Web Services treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.
In EventBridge, it is possible to create rules that lead to infinite loops, where a rule is fired repeatedly. For example, a rule might detect that ACLs have changed on an S3 bucket, and trigger software to change them to the desired state. If the rule is not written carefully, the subsequent change to the ACLs fires the rule again, creating an infinite loop.
To prevent this, write the rules so that the triggered actions do not re-fire the same rule. For example, your rule could fire only if ACLs are found to be in a bad state, instead of after any change.
An infinite loop can quickly cause higher than expected charges. We recommend that you use budgeting, which alerts you when charges exceed your specified limit. For more information, see Managing Your Costs with Budgets.
2896 2897 2898 2899 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 2896 def put_rule(params = {}, = {}) req = build_request(:put_rule, params) req.send_request() end |
#put_targets(params = {}) ⇒ Types::PutTargetsResponse
Adds the specified targets to the specified rule, or updates the targets if they are already associated with the rule.
Targets are the resources that are invoked when a rule is triggered.
The maximum number of entries per request is 10.
For a list of services you can configure as targets for events, see EventBridge targets in the Amazon EventBridge User Guide.
Creating rules with built-in targets is supported only in the Amazon Web Services Management Console. The built-in targets are:
Amazon EBS CreateSnapshot API call
Amazon EC2 RebootInstances API call
Amazon EC2 StopInstances API call
Amazon EC2 TerminateInstances API call
For some target types, PutTargets
provides target-specific
parameters. If the target is a Kinesis data stream, you can optionally
specify which shard the event goes to by using the KinesisParameters
argument. To invoke a command on multiple EC2 instances with one rule,
you can use the RunCommandParameters
field.
To be able to make API calls against the resources that you own, Amazon EventBridge needs the appropriate permissions:
For Lambda and Amazon SNS resources, EventBridge relies on resource-based policies.
For EC2 instances, Kinesis Data Streams, Step Functions state machines and API Gateway APIs, EventBridge relies on IAM roles that you specify in the
RoleARN
argument inPutTargets
.
For more information, see Authentication and Access Control in the Amazon EventBridge User Guide.
If another Amazon Web Services account is in the same region and has
granted you permission (using PutPermission
), you can send events to
that account. Set that account's event bus as a target of the rules
in your account. To send the matched events to the other account,
specify that account's event bus as the Arn
value when you run
PutTargets
. If your account sends events to another account, your
account is charged for each sent event. Each event sent to another
account is charged as a custom event. The account receiving the event
is not charged. For more information, see Amazon EventBridge
Pricing.
Input
, InputPath
, and InputTransformer
are not available with
PutTarget
if the target is an event bus of a different Amazon Web
Services account.
If you are setting the event bus of another account as the target, and
that account granted permission to your account through an
organization instead of directly by the account ID, then you must
specify a RoleArn
with proper permissions in the Target
structure.
For more information, see Sending and Receiving Events Between Amazon
Web Services Accounts in the Amazon EventBridge User Guide.
PutTargets
call without a role on the same target (same Id
and
Arn
) will not remove the role.
For more information about enabling cross-account events, see PutPermission.
Input, InputPath, and InputTransformer are mutually exclusive and optional parameters of a target. When a rule is triggered due to a matched event:
If none of the following arguments are specified for a target, then the entire event is passed to the target in JSON format (unless the target is Amazon EC2 Run Command or Amazon ECS task, in which case nothing from the event is passed to the target).
If Input is specified in the form of valid JSON, then the matched event is overridden with this constant.
If InputPath is specified in the form of JSONPath (for example,
$.detail
), then only the part of the event specified in the path is passed to the target (for example, only the detail part of the event is passed).If InputTransformer is specified, then one or more specified JSONPaths are extracted from the event and used as values in a template that you specify as the input to the target.
When you specify InputPath
or InputTransformer
, you must use JSON
dot notation, not bracket notation.
When you add targets to a rule and the associated rule triggers soon after, new or updated targets might not be immediately invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the
same time. If that happens, FailedEntryCount
is non-zero in the
response and each entry in FailedEntries
provides the ID of the
failed target and the error code.
3172 3173 3174 3175 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3172 def put_targets(params = {}, = {}) req = build_request(:put_targets, params) req.send_request() end |
#remove_permission(params = {}) ⇒ Struct
Revokes the permission of another Amazon Web Services account to be
able to put events to the specified event bus. Specify the account to
revoke by the StatementId
value that you associated with the account
when you granted it permission with PutPermission
. You can find the
StatementId
by using DescribeEventBus.
3212 3213 3214 3215 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3212 def (params = {}, = {}) req = build_request(:remove_permission, params) req.send_request() end |
#remove_targets(params = {}) ⇒ Types::RemoveTargetsResponse
Removes the specified targets from the specified rule. When the rule is triggered, those targets are no longer be invoked.
RemoveTargets
doesn't guarantee all
targets are removed from the rule, it means that the target(s) listed
in the request are removed.
When you remove a target, when the associated rule triggers, removed targets might continue to be invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the
same time. If that happens, FailedEntryCount
is non-zero in the
response and each entry in FailedEntries
provides the ID of the
failed target and the error code.
The maximum number of entries per request is 10.
3280 3281 3282 3283 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3280 def remove_targets(params = {}, = {}) req = build_request(:remove_targets, params) req.send_request() end |
#start_replay(params = {}) ⇒ Types::StartReplayResponse
Starts the specified replay. Events are not necessarily replayed in
the exact same order that they were added to the archive. A replay
processes events to replay based on the time in the event, and replays
them using 1 minute intervals. If you specify an EventStartTime
and
an EventEndTime
that covers a 20 minute time range, the events are
replayed from the first minute of that 20 minute range first. Then the
events from the second minute are replayed. You can use
DescribeReplay
to determine the progress of a replay. The value
returned for EventLastReplayedTime
indicates the time within the
specified time range associated with the last event replayed.
3349 3350 3351 3352 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3349 def start_replay(params = {}, = {}) req = build_request(:start_replay, params) req.send_request() end |
#tag_resource(params = {}) ⇒ Struct
Assigns one or more tags (key-value pairs) to the specified EventBridge resource. Tags can help you organize and categorize your resources. You can also use them to scope user permissions by granting a user permission to access or change only resources with certain tag values. In EventBridge, rules and event buses can be tagged.
Tags don't have any semantic meaning to Amazon Web Services and are interpreted strictly as strings of characters.
You can use the TagResource
action with a resource that already has
tags. If you specify a new tag key, this tag is appended to the list
of tags associated with the resource. If you specify a tag key that is
already associated with the resource, the new tag value that you
specify replaces the previous value for that tag.
You can associate as many as 50 tags with a resource.
3395 3396 3397 3398 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3395 def tag_resource(params = {}, = {}) req = build_request(:tag_resource, params) req.send_request() end |
#test_event_pattern(params = {}) ⇒ Types::TestEventPatternResponse
Tests whether the specified event pattern matches the provided event.
Most services in Amazon Web Services treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.
3458 3459 3460 3461 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3458 def test_event_pattern(params = {}, = {}) req = build_request(:test_event_pattern, params) req.send_request() end |
#untag_resource(params = {}) ⇒ Struct
Removes one or more tags from the specified EventBridge resource. In Amazon EventBridge (CloudWatch Events), rules and event buses can be tagged.
3486 3487 3488 3489 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3486 def untag_resource(params = {}, = {}) req = build_request(:untag_resource, params) req.send_request() end |
#update_api_destination(params = {}) ⇒ Types::UpdateApiDestinationResponse
Updates an API destination.
3541 3542 3543 3544 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3541 def update_api_destination(params = {}, = {}) req = build_request(:update_api_destination, params) req.send_request() end |
#update_archive(params = {}) ⇒ Types::UpdateArchiveResponse
Updates the specified archive.
3587 3588 3589 3590 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3587 def update_archive(params = {}, = {}) req = build_request(:update_archive, params) req.send_request() end |
#update_connection(params = {}) ⇒ Types::UpdateConnectionResponse
Updates settings for a connection.
3698 3699 3700 3701 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3698 def update_connection(params = {}, = {}) req = build_request(:update_connection, params) req.send_request() end |
#update_endpoint(params = {}) ⇒ Types::UpdateEndpointResponse
Update an existing endpoint. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
3787 3788 3789 3790 |
# File 'gems/aws-sdk-eventbridge/lib/aws-sdk-eventbridge/client.rb', line 3787 def update_endpoint(params = {}, = {}) req = build_request(:update_endpoint, params) req.send_request() end |