CreateGovCloudAccount - AWS Organizations

CreateGovCloudAccount

This action is available if all of the following are true:

  • You're authorized to create accounts in the AWS GovCloud (US) Region. For more information on the AWS GovCloud (US) Region, see the AWS GovCloud User Guide.

  • You already have an account in the AWS GovCloud (US) Region that is paired with a management account of an organization in the commercial Region.

  • You call this action from the management account of your organization in the commercial Region.

  • You have the organizations:CreateGovCloudAccount permission.

AWS Organizations automatically creates the required service-linked role named AWSServiceRoleForOrganizations. For more information, see AWS Organizations and service-linked roles in the AWS Organizations User Guide.

AWS automatically enables CloudTrail for AWS GovCloud (US) accounts, but you should also do the following:

  • Verify that CloudTrail is enabled to store logs.

  • Create an Amazon S3 bucket for CloudTrail log storage.

    For more information, see Verifying CloudTrail Is Enabled in the AWS GovCloud User Guide.

If the request includes tags, then the requester must have the organizations:TagResource permission. The tags are attached to the commercial account associated with the GovCloud account, rather than the GovCloud account itself. To add tags to the GovCloud account, call the TagResource operation in the GovCloud Region after the new GovCloud account exists.

You call this action from the management account of your organization in the commercial Region to create a standalone AWS account in the AWS GovCloud (US) Region. After the account is created, the management account of an organization in the AWS GovCloud (US) Region can invite it to that organization. For more information on inviting standalone accounts in the AWS GovCloud (US) to join an organization, see AWS Organizations in the AWS GovCloud User Guide.

Calling CreateGovCloudAccount is an asynchronous request that AWS performs in the background. Because CreateGovCloudAccount operates asynchronously, it can return a successful completion message even though account initialization might still be in progress. You might need to wait a few minutes before you can successfully access the account. To check the status of the request, do one of the following:

When you call the CreateGovCloudAccount action, you create two accounts: a standalone account in the AWS GovCloud (US) Region and an associated account in the commercial Region for billing and support purposes. The account in the commercial Region is automatically a member of the organization whose credentials made the request. Both accounts are associated with the same email address.

A role is created in the new account in the commercial Region that allows the management account in the organization in the commercial Region to assume it. An AWS GovCloud (US) account is then created and associated with the commercial account that you just created. A role is also created in the new AWS GovCloud (US) account that can be assumed by the AWS GovCloud (US) account that is associated with the management account of the commercial organization. For more information and to view a diagram that explains how account access works, see AWS Organizations in the AWS GovCloud User Guide.

For more information about creating accounts, see Creating a member account in your organization in the AWS Organizations User Guide.

Important
  • When you create an account in an organization using the AWS Organizations console, API, or CLI commands, the information required for the account to operate as a standalone account is not automatically collected. This includes a payment method and signing the end user license agreement (EULA). If you must remove an account from your organization later, you can do so only after you provide the missing information. For more information, see Considerations before removing an account from an organization in the AWS Organizations User Guide.

  • If you get an exception that indicates that you exceeded your account limits for the organization, contact AWS Support.

  • If you get an exception that indicates that the operation failed because your organization is still initializing, wait one hour and then try again. If the error persists, contact AWS Support.

  • Using CreateGovCloudAccount to create multiple temporary accounts isn't recommended. You can only close an account from the AWS Billing and Cost Management console, and you must be signed in as the root user. For information on the requirements and process for closing an account, see Closing a member account in your organization in the AWS Organizations User Guide.

Note

When you create a member account with this operation, you can choose whether to create the account with the IAM User and Role Access to Billing Information switch enabled. If you enable it, IAM users and roles that have appropriate permissions can view billing information for the account. If you disable it, only the account root user can access billing information. For information about how to disable this switch for an account, see Granting access to your billing information and tools.

Request Syntax

{ "AccountName": "string", "Email": "string", "IamUserAccessToBilling": "string", "RoleName": "string", "Tags": [ { "Key": "string", "Value": "string" } ] }

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

The request accepts the following data in JSON format.

AccountName

The friendly name of the member account.

The account name can consist of only the characters [a-z],[A-Z],[0-9], hyphen (-), or dot (.) You can't separate characters with a dash (–).

Type: String

Length Constraints: Minimum length of 1. Maximum length of 50.

Pattern: [\u0020-\u007E]+

Required: Yes

Email

Specifies the email address of the owner to assign to the new member account in the commercial Region. This email address must not already be associated with another AWS account. You must use a valid email address to complete account creation.

The rules for a valid email address:

  • The address must be a minimum of 6 and a maximum of 64 characters long.

  • All characters must be 7-bit ASCII characters.

  • There must be one and only one @ symbol, which separates the local name from the domain name.

  • The local name can't contain any of the following characters:

    whitespace, " ' ( ) < > [ ] : ; , \ | % &

  • The local name can't begin with a dot (.)

  • The domain name can consist of only the characters [a-z],[A-Z],[0-9], hyphen (-), or dot (.)

  • The domain name can't begin or end with a hyphen (-) or dot (.)

  • The domain name must contain at least one dot

You can't access the root user of the account or remove an account that was created with an invalid email address. Like all request parameters for CreateGovCloudAccount, the request for the email address for the AWS GovCloud (US) account originates from the commercial Region, not from the AWS GovCloud (US) Region.

Type: String

Length Constraints: Minimum length of 6. Maximum length of 64.

Pattern: See rules in parameter description

Required: Yes

IamUserAccessToBilling

If set to ALLOW, the new linked account in the commercial Region enables IAM users to access account billing information if they have the required permissions. If set to DENY, only the root user of the new account can access account billing information. For more information, see About IAM access to the Billing and Cost Management console in the AWS Billing and Cost Management User Guide.

If you don't specify this parameter, the value defaults to ALLOW, and IAM users and roles with the required permissions can access billing information for the new account.

Type: String

Valid Values: ALLOW | DENY

Required: No

RoleName

(Optional)

The name of an IAM role that AWS Organizations automatically preconfigures in the new member accounts in both the AWS GovCloud (US) Region and in the commercial Region. This role trusts the management account, allowing users in the management account to assume the role, as permitted by the management account administrator. The role has administrator permissions in the new member account.

If you don't specify this parameter, the role name defaults to OrganizationAccountAccessRole.

For more information about how to use this role to access the member account, see the following links:

The regex pattern that is used to validate this parameter. The pattern can include uppercase letters, lowercase letters, digits with no spaces, and any of the following characters: =,.@-

Type: String

Length Constraints: Maximum length of 64.

Pattern: [\w+=,.@-]{1,64}

Required: No

Tags

A list of tags that you want to attach to the newly created account. These tags are attached to the commercial account associated with the GovCloud account, and not to the GovCloud account itself. To add tags to the actual GovCloud account, call the TagResource operation in the GovCloud region after the new GovCloud account exists.

For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging AWS Organizations resources in the AWS Organizations User Guide.

Note

If any one of the tags is not valid or if you exceed the maximum allowed number of tags for an account, then the entire request fails and the account is not created.

Type: Array of Tag objects

Required: No

Response Syntax

{ "CreateAccountStatus": { "AccountId": "string", "AccountName": "string", "CompletedTimestamp": number, "FailureReason": "string", "GovCloudAccountId": "string", "Id": "string", "RequestedTimestamp": number, "State": "string" } }

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

CreateAccountStatus

Contains the status about a CreateAccount or CreateGovCloudAccount request to create an AWS account or an AWS GovCloud (US) account in an organization.

Type: CreateAccountStatus object

Errors

For information about the errors that are common to all actions, see Common Errors.

AccessDeniedException

You don't have permissions to perform the requested operation. The user or role that is making the request must have at least one IAM permissions policy attached that grants the required permissions. For more information, see Access Management in the IAM User Guide.

HTTP Status Code: 400

AWSOrganizationsNotInUseException

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

HTTP Status Code: 400

ConcurrentModificationException

The target of the operation is currently being modified by a different request. Try again later.

HTTP Status Code: 400

ConstraintViolationException

Performing this operation violates a minimum or maximum value limit. For example, attempting to remove the last service control policy (SCP) from an OU or root, inviting or creating too many accounts to the organization, or attaching too many policies to an account, OU, or root. This exception includes a reason that contains additional information about the violated limit:

Note

Some of the reasons in the following list might not be applicable to this specific API or operation.

  • ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.

  • ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the AWS Organizations User Guide.

  • ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.

  • ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.

  • ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact AWS Support to request an increase in your limit.

    Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact AWS Support to request an increase in the number of accounts.

    Note

    Deleted and closed accounts still count toward your limit.

    Important

    If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact AWS Support.

  • CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.

  • CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an AWS service integrated with Organizations. You can designate only a member account as a delegated administrator.

  • CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.​

  • CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.

  • CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.

  • CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time. ​

  • CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.

  • DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an AWS account as a delegated administrator for an AWS service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.

  • EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.

  • HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.

  • INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. AWS does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your AWS payments.

  • MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. For example, accounts with India addresses must be associated with the AISPL marketplace. All accounts in an organization must be associated with the same marketplace.

  • MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the AWS Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.

  • MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.

  • MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the AWS GovCloud (US-West) Region. For more information, see AWS Organizations in the AWS GovCloud User Guide.

  • MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the AWS Organizations User Guide.

  • MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.

  • MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.

  • MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.

  • MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the AWS Organizations User Guide.

  • MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.

  • ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.

  • OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.

  • OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.

  • POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.

  • POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.

  • SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.

  • TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.

  • WAIT_PERIOD_ACTIVE: After you create an AWS account, there is a waiting period before you can remove it from the organization. If you get an error that indicates that a wait period is required, try again in a few days.

HTTP Status Code: 400

FinalizingOrganizationException

AWS Organizations couldn't perform the operation because your organization hasn't finished initializing. This can take up to an hour. Try again later. If after one hour you continue to receive this error, contact AWS Support.

HTTP Status Code: 400

InvalidInputException

The requested operation failed because you provided invalid values for one or more of the request parameters. This exception includes a reason that contains additional information about the violated limit:

Note

Some of the reasons in the following list might not be applicable to this specific API or operation.

  • DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.

  • IMMUTABLE_POLICY: You specified a policy that is managed by AWS and can't be modified.

  • INPUT_REQUIRED: You must include a value for all required parameters.

  • INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.

  • INVALID_ENUM: You specified an invalid value.

  • INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.

  • INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.

  • INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.

  • INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.

  • INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.

  • INVALID_PATTERN: You provided a value that doesn't match the required pattern.

  • INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.

  • INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.

  • INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.

  • INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

  • INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for AWS use. System tags don’t count against your tags per resource limit.

  • MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.

  • MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.

  • MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.

  • MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.

  • MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.

  • MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.

  • TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.

  • UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

HTTP Status Code: 400

ServiceException

AWS Organizations can't complete your request because of an internal service error. Try again later.

HTTP Status Code: 500

TooManyRequestsException

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect AWS Organizations, see Quotas for AWS Organizations in the AWS Organizations User Guide.

HTTP Status Code: 400

UnsupportedAPIEndpointException

This action isn't available in the current AWS Region.

HTTP Status Code: 400

Examples

Example

The following example shows how to create a member account in the AWS GovCloud (US) Region in an organization. The commercial account is configured with the name Production Account and the email address of anaya@example.com. AWS Organizations automatically creates an IAM role using the default name of OrganizationAccountAccessRole because the roleName parameter isn't specified. Also, the setting that allows IAM users or roles with sufficient permissions to access account billing data in the account in the commercial Region is set to the default value of ALLOW because the IamUserAccessToBilling parameter isn't specified. AWS Organizations automatically sends Anaya a "Welcome to AWS" email.

Sample Request

POST / HTTP/1.1 X-Amz-Target: AWSOrganizationsV20161128.CreateGovCloudAccount { "Email": "anaya@example.com", "AccountName": "Production Account" }

Sample Response

HTTP/1.1 200 OK Content-Type: application/json { "CreateAccountStatus": { "State": "IN_PROGRESS", "Id": "car-examplecreateaccountrequestid111" } }

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: