AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Compute Cloud (EC2) DescribeVolumeStatus API operation.

Syntax

Get-EC2VolumeStatus
-VolumeId <String[]>
-Filter <Filter[]>
-MaxResult <Int32>
-NextToken <String>
-Select <String>
-PassThru <SwitchParameter>
-NoAutoIteration <SwitchParameter>
-ClientConfig <AmazonEC2Config>

Description

Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event. The DescribeVolumeStatus operation provides the following information about the specified volumes: Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitor the status of your volumes in the Amazon EBS User Guide. Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data. Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency. Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.) The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order.

This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

Parameters

-ClientConfig <AmazonEC2Config>
Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Filter <Filter[]>
The filters.
  • action.code - The action code for the event (for example, enable-volume-io).
  • action.description - A description of the action.
  • action.event-id - The event ID associated with the action.
  • availability-zone - The Availability Zone of the instance.
  • event.description - A description of the event.
  • event.event-id - The event ID.
  • event.event-type - The event type (for io-enabled: passed | failed; for io-performance: io-performance:degraded | io-performance:severely-degraded | io-performance:stalled).
  • event.not-after - The latest end time for the event.
  • event.not-before - The earliest start time for the event.
  • volume-status.details-name - The cause for volume-status.status (io-enabled | io-performance).
  • volume-status.details-status - The status of volume-status.details-name (for io-enabled: passed | failed; for io-performance: normal | degraded | severely-degraded | stalled).
  • volume-status.status - The status of the volume (ok | impaired | warning | insufficient-data).
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
AliasesFilters
-MaxResult <Int32>
The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1,000; if the value is larger than 1,000, only 1,000 results are returned. If this parameter is not used, then all items are returned. You cannot specify this parameter and the volume IDs parameter in the same request. For more information, see Pagination.
Note: In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesMaxItems, MaxResults
-NextToken <String>
The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.
Note: This parameter is only used if you are manually controlling output pagination of the service API call.
In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NoAutoIteration <SwitchParameter>
By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the VolumeId parameter. The -PassThru parameter is deprecated, use -Select '^VolumeId' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'VolumeStatuses'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.DescribeVolumeStatusResponse). Specifying the name of a property of type Amazon.EC2.Model.DescribeVolumeStatusResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-VolumeId <String[]>
The IDs of the volumes.Default: Describes all your volumes.
Required?False
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
AliasesVolumeIds

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

This cmdlet returns a collection of Amazon.EC2.Model.VolumeStatusItem objects. The service call response (type Amazon.EC2.Model.DescribeVolumeStatusResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.

Examples

Example 1

Get-EC2VolumeStatus -VolumeId vol-12345678

Actions : {}
AvailabilityZone : us-west-2a
Events : {}
VolumeId : vol-12345678
VolumeStatus : Amazon.EC2.Model.VolumeStatusInfo

(Get-EC2VolumeStatus -VolumeId vol-12345678).VolumeStatus

Details Status
------- ------
{io-enabled, io-performance} ok

(Get-EC2VolumeStatus -VolumeId vol-12345678).VolumeStatus.Details

Name Status
---- ------
io-enabled passed
io-performance not-applicable
This example describes the status of the specified volume.

Supported Version

AWS Tools for PowerShell: 2.x.y.z