CodePipeline 使用适用于 PowerShell V4 的工具的示例

以下代码示例向您展示了如何使用带 CodePipeline的 Amazon Tools for PowerShell V4 来执行操作和实现常见场景。

操作是大型程序的代码摘录，必须在上下文中运行。您可以通过操作了解如何调用单个服务函数，还可以通过函数相关场景的上下文查看操作。

每个示例都包含一个指向完整源代码的链接，您可以从中找到有关如何在上下文中设置和运行代码的说明。

主题

操作

操作

以下代码示例演示了如何使用 Confirm-CPJob。

适用于 PowerShell V4 的工具

示例 1：此示例获取指定作业的状态。


Confirm-CPJob -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE -Nonce 3

输出：


Value
-----
InProgress

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) AcknowledgeJob中的。

以下代码示例演示了如何使用 Disable-CPStageTransition。

适用于 PowerShell V4 的工具

示例 1：此示例对指定管道中的指定阶段禁用入站转换。


Disable-CPStageTransition -PipelineName CodePipelineDemo -Reason "Disabling temporarily." -StageName Beta -TransitionType Inbound

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) DisableStageTransition中的。

以下代码示例演示了如何使用 Enable-CPStageTransition。

适用于 PowerShell V4 的工具

示例 1：此示例对指定管道中的指定阶段启用入站转换。


Enable-CPStageTransition -PipelineName CodePipelineDemo -StageName Beta -TransitionType Inbound

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) EnableStageTransition中的。

以下代码示例演示了如何使用 Get-CPActionType。

适用于 PowerShell V4 的工具

示例 1：此示例获取有关指定所有者的所有可用操作的信息。


ForEach ($actionType in (Get-CPActionType -ActionOwnerFilter AWS)) {
  Write-Output ("For Category = " + $actionType.Id.Category + ", Owner = " + $actionType.Id.Owner + ", Provider = " + $actionType.Id.Provider + ", Version = " + $actionType.Id.Version + ":")
  Write-Output ("  ActionConfigurationProperties:")
  ForEach ($acp in $actionType.ActionConfigurationProperties) {
    Write-Output ("    For " + $acp.Name + ":")
    Write-Output ("      Description = " + $acp.Description)
    Write-Output ("      Key = " + $acp.Key)
    Write-Output ("      Queryable = " + $acp.Queryable)
    Write-Output ("      Required = " + $acp.Required)
    Write-Output ("      Secret = " + $acp.Secret)
  }
  Write-Output ("  InputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.InputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.InputArtifactDetails.MinimumCount)
  Write-Output ("  OutputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.OutputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.OutputArtifactDetails.MinimumCount)
  Write-Output ("  Settings:")
  Write-Output ("    EntityUrlTemplate = " + $actionType.Settings.EntityUrlTemplate)
  Write-Output ("    ExecutionUrlTemplate = " + $actionType.Settings.ExecutionUrlTemplate)
}

输出：


For Category = Deploy, Owner = AWS, Provider = ElasticBeanstalk, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS Elastic Beanstalk Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For EnvironmentName:
      Description = The AWS Elastic Beanstalk Environment name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName} 
For Category = Deploy, Owner = AWS, Provider = CodeDeploy, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS CodeDeploy Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For DeploymentGroupName:
      Description = The AWS CodeDeploy Deployment Group name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/applications/{Config:ApplicationName}/deployment-groups/{Config:DeploymentGroupName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/deployments/{ExternalExecutionId}

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) ListActionTypes中的。

以下代码示例演示了如何使用 Get-CPActionableJobList。

适用于 PowerShell V4 的工具

示例 1：此示例获取有关指定操作类别、所有者、提供者、版本和查询参数的所有可操作作业的信息。


Get-CPActionableJobList -ActionTypeId_Category Build -ActionTypeId_Owner Custom -ActionTypeId_Provider MyCustomProviderName -ActionTypeId_Version 1 -QueryParam @{"ProjectName" = "MyProjectName"}

输出：


AccountId       Data                                 Id                                      Nonce
---------       ----                                 --                                      -----
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    0de392f5-712d-4f41-ace3-f57a0EXAMPLE    3

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) PollForJobs中的。

以下代码示例演示了如何使用 Get-CPJobDetail。

适用于 PowerShell V4 的工具

示例 1：此示例获取有关指定作业的一般信息。


Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE

输出：


AccountId       Data                                 Id
---------       ----                                 --
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    f570dc12-5ef3-44bc-945a-6e133EXAMPLE

示例 2：此示例获取有关指定作业的详细信息。


$jobDetails = Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE
Write-Output ("For Job " + $jobDetails.Id + ":")
Write-Output ("  AccountId = " + $jobDetails.AccountId)
$jobData = $jobDetails.Data
Write-Output ("  Configuration:")
ForEach ($key in $jobData.ActionConfiguration.Keys) {
  $value = $jobData.ActionConfiguration.$key
  Write-Output ("    " + $key + " = " + $value)
}
Write-Output ("  ActionTypeId:")
Write-Output ("    Category = " + $jobData.ActionTypeId.Category)
Write-Output ("    Owner = " + $jobData.ActionTypeId.Owner)
Write-Output ("    Provider = " + $jobData.ActionTypeId.Provider)
Write-Output ("    Version = " + $jobData.ActionTypeId.Version)
Write-Output ("  ArtifactCredentials:")
Write-Output ("    AccessKeyId = " + $jobData.ArtifactCredentials.AccessKeyId)
Write-Output ("    SecretAccessKey = " + $jobData.ArtifactCredentials.SecretAccessKey)
Write-Output ("    SessionToken = " + $jobData.ArtifactCredentials.SessionToken)
Write-Output ("  InputArtifacts:")
ForEach ($ia in $jobData.InputArtifacts) {
  Write-Output ("    " + $ia.Name)
}
Write-Output ("  OutputArtifacts:")
ForEach ($oa in $jobData.OutputArtifacts) {
  Write-Output ("    " + $oa.Name)
}
Write-Output ("  PipelineContext:")
$context = $jobData.PipelineContext
Write-Output ("    Name = " + $context.Action.Name)
Write-Output ("    PipelineName = " + $context.PipelineName)
Write-Output ("    Stage = " + $context.Stage.Name)

输出：


For Job f570dc12-5ef3-44bc-945a-6e133EXAMPLE:
  AccountId = 80398EXAMPLE
  Configuration:
  ActionTypeId:
    Category = Build
    Owner = Custom
    Provider = MyCustomProviderName
    Version = 1
  ArtifactCredentials:
    AccessKeyId = ASIAIEI3...IXI6YREX
    SecretAccessKey = cqAFDhEi...RdQyfa2u
    SessionToken = AQoDYXdz...5u+lsAU=
  InputArtifacts:
    MyApp
  OutputArtifacts:
    MyAppBuild
  PipelineContext:
    Name = Build
    PipelineName = CodePipelineDemo
    Stage = Build

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) GetJobDetails中的。

以下代码示例演示了如何使用 Get-CPPipeline。

适用于 PowerShell V4 的工具

示例 1：此示例获取有关指定管道的一般信息。


Get-CPPipeline -Name CodePipelineDemo -Version 1

输出：


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Build, Beta, TestStage}
Version       : 1

示例 2：此示例获取有关指定管道的详细信息。


$pipeline = Get-CPPipeline -Name CodePipelineDemo
Write-Output ("Name = " + $pipeline.Name)
Write-Output ("RoleArn = " + $pipeline.RoleArn)
Write-Output ("Version = " + $pipeline.Version)
Write-Output ("ArtifactStore:")
Write-Output ("  Location = " + $pipeline.ArtifactStore.Location)
Write-Output ("  Type = " + $pipeline.ArtifactStore.Type.Value)
Write-Output ("Stages:")
ForEach ($stage in $pipeline.Stages) {
  Write-Output ("  Name = " + $stage.Name)
  Write-Output ("    Actions:")
  ForEach ($action in $stage.Actions) {
    Write-Output ("      Name = " + $action.Name)
	Write-Output ("        Category = " + $action.ActionTypeId.Category)
	Write-Output ("        Owner = " + $action.ActionTypeId.Owner)
	Write-Output ("        Provider = " + $action.ActionTypeId.Provider)
	Write-Output ("        Version = " + $action.ActionTypeId.Version)
	Write-Output ("        Configuration:")
	ForEach ($key in $action.Configuration.Keys) {
	  $value = $action.Configuration.$key
	  Write-Output ("          " + $key + " = " + $value)
	}
	Write-Output ("        InputArtifacts:")
	ForEach ($ia in $action.InputArtifacts) {
	  Write-Output ("          " + $ia.Name)
	}
	ForEach ($oa in $action.OutputArtifacts) {
	  Write-Output ("          " + $oa.Name)
	}
	Write-Output ("        RunOrder = " + $action.RunOrder)
  }
}

输出：


Name = CodePipelineDemo
RoleArn = arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Version = 3
ArtifactStore:
  Location = amzn-s3-demo-bucket
  Type = S3
Stages:
  Name = Source
    Actions:
      Name = Source
        Category = Source
        Owner = ThirdParty
        Provider = GitHub
        Version = 1
        Configuration:
          Branch = master
          OAuthToken = ****
          Owner = my-user-name
          Repo = MyRepoName
        InputArtifacts:
          MyApp
        RunOrder = 1
  Name = Build
    Actions:
      Name = Build
        Category = Build
        Owner = Custom
        Provider = MyCustomProviderName
        Version = 1
        Configuration:
          ProjectName = MyProjectName
        InputArtifacts:
          MyApp
          MyAppBuild
        RunOrder = 1
  Name = Beta
    Actions:
      Name = CodePipelineDemoFleet
        Category = Deploy
        Owner = AWS
        Provider = CodeDeploy
        Version = 1
        Configuration:
          ApplicationName = CodePipelineDemoApplication
          DeploymentGroupName = CodePipelineDemoFleet
        InputArtifacts:
          MyAppBuild
        RunOrder = 1
  Name = TestStage
    Actions:
      Name = MyJenkinsTestAction
        Category = Test
        Owner = Custom
        Provider = MyCustomTestProvider
        Version = 1
        Configuration:
          ProjectName = MyJenkinsProjectName
        InputArtifacts:
          MyAppBuild
        RunOrder = 1

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) GetPipeline中的。

以下代码示例演示了如何使用 Get-CPPipelineList。

适用于 PowerShell V4 的工具

示例 1：此示例获取可用管道的列表。


Get-CPPipelineList

输出：


Created                  Name                Updated                  Version
-------                  ----                -------                  -------
8/13/2015 10:17:54 PM    CodePipelineDemo    8/13/2015 10:17:54 PM    3
7/8/2015 2:41:53 AM      MyFirstPipeline     7/22/2015 9:06:37 PM     7

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) ListPipelines中的。

以下代码示例演示了如何使用 Get-CPPipelineState。

适用于 PowerShell V4 的工具

示例 1：此示例获取有关指定管道的阶段的一般信息。


Get-CPPipelineState -Name CodePipelineDemo

输出：


Created         : 8/13/2015 10:17:54 PM
PipelineName    : CodePipelineDemo
PipelineVersion : 1
StageStates     : {Source, Build, Beta, TestStage}
Updated         : 8/13/2015 10:17:54 PM

示例 2：此示例获取有关指定管道的阶段的详细信息。


ForEach ($stageState in (Get-CPPipelineState -Name $arg).StageStates) {
  Write-Output ("For " + $stageState.StageName + ":")
  Write-Output ("  InboundTransitionState:")
  Write-Output ("    DisabledReason = " + $stageState.InboundTransitionState.DisabledReason)
  Write-Output ("    Enabled = " + $stageState.InboundTransitionState.Enabled)
  Write-Output ("    LastChangedAt = " + $stageState.InboundTransitionState.LastChangedAt)
  Write-Output ("    LastChangedBy = " + $stageState.InboundTransitionState.LastChangedBy)
  Write-Output ("  ActionStates:")
  ForEach ($actionState in $stageState.ActionStates) {
    Write-Output ("    For " + $actionState.ActionName + ":")
	Write-Output ("      CurrentRevision:")
    Write-Output ("        Created = " + $actionState.CurrentRevision.Created)
	Write-Output ("        RevisionChangeId = " + $actionState.CurrentRevision.RevisionChangeId)
	Write-Output ("        RevisionId = " + $actionState.CurrentRevision.RevisionId)
	Write-Output ("      EntityUrl = " + $actionState.EntityUrl)
	Write-Output ("      LatestExecution:")
    Write-Output ("        ErrorDetails:")
    Write-Output ("          Code = " + $actionState.LatestExecution.ErrorDetails.Code)
	Write-Output ("          Message = " + $actionState.LatestExecution.ErrorDetails.Message)
	Write-Output ("        ExternalExecutionId = " + $actionState.LatestExecution.ExternalExecutionId)
	Write-Output ("        ExternalExecutionUrl = " + $actionState.LatestExecution.ExternalExecutionUrl)
	Write-Output ("        LastStatusChange	= " + $actionState.LatestExecution.LastStatusChange)
	Write-Output ("        PercentComplete = " + $actionState.LatestExecution.PercentComplete)
	Write-Output ("        Status = " + $actionState.LatestExecution.Status)
	Write-Output ("        Summary = " + $actionState.LatestExecution.Summary)
	Write-Output ("      RevisionUrl = " + $actionState.RevisionUrl)
  }
}

输出：


For Source:
  InboundTransitionState:
    DisabledReason =
    Enabled =
    LastChangedAt =
    LastChangedBy =
  ActionStates:
    For Source:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://github.com/my-user-name/MyRepoName/tree/master
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/20/2015 23:28:45
        PercentComplete = 0
        Status = Succeeded
        Summary =
      RevisionUrl =
For Build:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For Build:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code = TimeoutError
          Message = The action failed because a job worker exceeded its time limit. If this is a custom action, make sure that the job worker is configured correctly.
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/21/2015 00:29:29
        PercentComplete = 0
        Status = Failed
        Summary =
      RevisionUrl =
For Beta:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For CodePipelineDemoFleet:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://console.aws.amazon.com/codedeploy/home?#/applications/CodePipelineDemoApplication/deployment-groups/CodePipelineDemoFleet
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = d-D5LTCZXEX
        ExternalExecutionUrl = https://console.aws.amazon.com/codedeploy/home?#/deployments/d-D5LTCZXEX
        LastStatusChange = 07/08/2015 22:07:42
        PercentComplete = 0
        Status = Succeeded
        Summary = Deployment Succeeded
      RevisionUrl =
For TestStage:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For MyJenkinsTestAction25:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = 5
        ExternalExecutionUrl = http://54.174.131.1EX/job/MyJenkinsDemo/5
        LastStatusChange = 07/08/2015 22:09:03
        PercentComplete = 0
        Status = Succeeded
        Summary = Finished
      RevisionUrl =

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) GetPipelineState中的。

以下代码示例演示了如何使用 New-CPCustomActionType。

适用于 PowerShell V4 的工具

示例 1：此示例使用指定属性创建新的自定义操作。


New-CPCustomActionType -Category Build -ConfigurationProperty @{"Description" = "The name of the build project must be provided when this action is added to the pipeline."; "Key" = $True; "Name" = "ProjectName"; "Queryable" = $False; "Required" = $True; "Secret" = $False; "Type" = "String"} -Settings_EntityUrlTemplate "https://my-build-instance/job/{Config:ProjectName}/" -Settings_ExecutionUrlTemplate "https://my-build-instance/job/mybuildjob/lastSuccessfulBuild{ExternalExecutionId}/" -InputArtifactDetails_MaximumCount 1 -OutputArtifactDetails_MaximumCount 1 -InputArtifactDetails_MinimumCount 0 -OutputArtifactDetails_MinimumCount 0 -Provider "MyBuildProviderName" -Version 1

输出：


ActionConfigurationProperties : {ProjectName}
Id                            : Amazon.CodePipeline.Model.ActionTypeId
InputArtifactDetails          : Amazon.CodePipeline.Model.ArtifactDetails
OutputArtifactDetails         : Amazon.CodePipeline.Model.ArtifactDetails
Settings                      : Amazon.CodePipeline.Model.ActionTypeSettings

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) CreateCustomActionType中的。

以下代码示例演示了如何使用 New-CPPipeline。

适用于 PowerShell V4 的工具

示例 1：此示例使用指定设置创建新的管道。


$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "Source"
$deployStage.Name = "Beta"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

New-CPPipeline -Pipeline $pipeline

输出：


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Beta}
Version       : 1

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) CreatePipeline中的。

以下代码示例演示了如何使用 Remove-CPCustomActionType。

适用于 PowerShell V4 的工具

示例 1：此示例删除指定的自定义操作。在继续操作之前，该命令将提示进行确认。添加 -Force 参数可在不提示的情况下删除自定义操作。


Remove-CPCustomActionType -Category Build -Provider MyBuildProviderName -Version 1

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) DeleteCustomActionType中的。

以下代码示例演示了如何使用 Remove-CPPipeline。

适用于 PowerShell V4 的工具

示例 1：此示例删除指定的管道。在继续操作之前，该命令将提示进行确认。添加 -Force 参数可在不提示的情况下删除管道。


Remove-CPPipeline -Name CodePipelineDemo

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) DeletePipeline中的。

以下代码示例演示了如何使用 Start-CPPipelineExecution。

适用于 PowerShell V4 的工具

示例 1：此示例开始运行指定的管道。


Start-CPPipelineExecution -Name CodePipelineDemo

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) StartPipelineExecution中的。

以下代码示例演示了如何使用 Update-CPPipeline。

适用于 PowerShell V4 的工具

示例 1：此示例使用指定的设置更新指定的现有管道。


$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "MyInputFiles"
$deployStage.Name = "MyTestDeployment"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

Update-CPPipeline -Pipeline $pipeline

输出：


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {InputFiles, TestDeployment}
Version       : 2

有关 API 的详细信息，请参阅 Amazon Tools for PowerShell Cmdlet 参考 (V 4) UpdatePipeline中的。

Javascript 在您的浏览器中被禁用或不可用。

要使用 Amazon Web Services 文档，必须启用 Javascript。请参阅浏览器的帮助页面以了解相关说明。

CodeDeploy

Amazon Cognito Identity