Class: Aws::S3::Types::PutObjectRequest
- Inherits:
-
Struct
- Object
- Struct
- Aws::S3::Types::PutObjectRequest
- Defined in:
- gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb
Overview
Constant Summary collapse
- SENSITIVE =
[:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context]
Instance Attribute Summary collapse
-
#acl ⇒ String
The canned ACL to apply to the object.
-
#body ⇒ IO
Object data.
-
#bucket ⇒ String
The bucket name to which the PUT action was initiated.
-
#bucket_key_enabled ⇒ Boolean
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS).
-
#cache_control ⇒ String
Can be used to specify caching behavior along the request/reply chain.
-
#checksum_algorithm ⇒ String
Indicates the algorithm used to create the checksum for the object when you use the SDK.
-
#checksum_crc32 ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
-
#checksum_crc32c ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
-
#checksum_sha1 ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
-
#checksum_sha256 ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
-
#content_disposition ⇒ String
Specifies presentational information for the object.
-
#content_encoding ⇒ String
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
-
#content_language ⇒ String
The language the content is in.
-
#content_length ⇒ Integer
Size of the body in bytes.
-
#content_md5 ⇒ String
The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864.
-
#content_type ⇒ String
A standard MIME type describing the format of the contents.
-
#expected_bucket_owner ⇒ String
The account ID of the expected bucket owner.
-
#expires ⇒ Time
The date and time at which the object is no longer cacheable.
-
#grant_full_control ⇒ String
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
-
#grant_read ⇒ String
Allows grantee to read the object data and its metadata.
-
#grant_read_acp ⇒ String
Allows grantee to read the object ACL.
-
#grant_write_acp ⇒ String
Allows grantee to write the ACL for the applicable object.
-
#key ⇒ String
Object key for which the PUT action was initiated.
-
#metadata ⇒ Hash<String,String>
A map of metadata to store with the object in S3.
-
#object_lock_legal_hold_status ⇒ String
Specifies whether a legal hold will be applied to this object.
-
#object_lock_mode ⇒ String
The Object Lock mode that you want to apply to this object.
-
#object_lock_retain_until_date ⇒ Time
The date and time when you want this object's Object Lock to expire.
-
#request_payer ⇒ String
Confirms that the requester knows that they will be charged for the request.
-
#server_side_encryption ⇒ String
The server-side encryption algorithm that was used when you store this object in Amazon S3 (for example,
AES256
,aws:kms
,aws:kms:dsse
). -
#sse_customer_algorithm ⇒ String
Specifies the algorithm to use when encrypting the object (for example,
AES256
). -
#sse_customer_key ⇒ String
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data.
-
#sse_customer_key_md5 ⇒ String
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
-
#ssekms_encryption_context ⇒ String
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption.
-
#ssekms_key_id ⇒ String
If
x-amz-server-side-encryption
has a valid value ofaws:kms
oraws:kms:dsse
, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. -
#storage_class ⇒ String
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects.
-
#tagging ⇒ String
The tag-set for the object.
-
#website_redirect_location ⇒ String
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL.
Instance Attribute Details
#acl ⇒ String
The canned ACL to apply to the object. For more information, see Canned ACL in the Amazon S3 User Guide.
When adding a new object, you can use headers to grant ACL-based permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. By default, all objects are private. Only the owner has full access control. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API in the Amazon S3 User Guide.
If the bucket that you're uploading objects to uses the bucket
owner enforced setting for S3 Object Ownership, ACLs are disabled
and no longer affect permissions. Buckets that use this setting only
accept PUT requests that don't specify an ACL or PUT requests that
specify bucket owner full control ACLs, such as the
bucket-owner-full-control
canned ACL or an equivalent form of this
ACL expressed in the XML format. PUT requests that contain other
ACLs (for example, custom grants to certain Amazon Web Services
accounts) fail and return a 400
error with the error code
AccessControlListNotSupported
. For more information, see
Controlling ownership of objects and disabling ACLs in the
Amazon S3 User Guide.
- This functionality is not supported for Amazon S3 on Outposts.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#body ⇒ IO
Object data.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#bucket ⇒ String
The bucket name to which the PUT action was initiated.
Directory buckets - When you use this operation with a directory
bucket, you must use virtual-hosted-style requests in the format
Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style
requests are not supported. Directory bucket names must be unique in
the chosen Availability Zone. Bucket names must follow the format
bucket_base_name--az-id--x-s3
(for example,
DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket
naming restrictions, see Directory bucket naming rules in the
Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
S3 on Outposts - When you use this action with Amazon S3 on
Outposts, you must direct requests to the S3 on Outposts hostname.
The S3 on Outposts hostname takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
.
When you use this action with S3 on Outposts through the Amazon Web
Services SDKs, you provide the Outposts access point ARN in place of
the bucket name. For more information about S3 on Outposts ARNs, see
What is S3 on Outposts? in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#bucket_key_enabled ⇒ Boolean
Specifies whether Amazon S3 should use an S3 Bucket Key for object
encryption with server-side encryption using Key Management Service
(KMS) keys (SSE-KMS). Setting this header to true
causes Amazon S3
to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#cache_control ⇒ String
Can be used to specify caching behavior along the request/reply chain. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#checksum_algorithm ⇒ String
Indicates the algorithm used to create the checksum for the object
when you use the SDK. This header will not provide any additional
functionality if you don't use the SDK. When you send this header,
there must be a corresponding x-amz-checksum-algorithm
or
x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request
with the HTTP status code 400 Bad Request
.
For the x-amz-checksum-algorithm
header, replace algorithm
with the supported algorithm from the following list:
CRC32
CRC32C
SHA1
SHA256
For more information, see Checking object integrity in the Amazon S3 User Guide.
If the individual checksum value you provide through
x-amz-checksum-algorithm
doesn't match the checksum algorithm
you set through x-amz-sdk-checksum-algorithm
, Amazon S3 ignores
any provided ChecksumAlgorithm
parameter and uses the checksum
algorithm that matches the provided value in
x-amz-checksum-algorithm
.
CRC32
is the default checksum algorithm that's used for
performance.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#checksum_crc32 ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#checksum_crc32c ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#checksum_sha1 ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#checksum_sha256 ⇒ String
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#content_disposition ⇒ String
Specifies presentational information for the object. For more information, see https://www.rfc-editor.org/rfc/rfc6266#section-4.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#content_encoding ⇒ String
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#content_language ⇒ String
The language the content is in.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#content_length ⇒ Integer
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#content_md5 ⇒ String
The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864. This header can be used as a message integrity check to verify that the data is the same data that was originally sent. Although it is optional, we recommend using the Content-MD5 mechanism as an end-to-end integrity check. For more information about REST request authentication, see REST Authentication.
Content-MD5
header is required for any request to upload an
object with a retention period configured using Amazon S3 Object
Lock. For more information about Amazon S3 Object Lock, see Amazon
S3 Object Lock Overview in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#content_type ⇒ String
A standard MIME type describing the format of the contents. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#expected_bucket_owner ⇒ String
The account ID of the expected bucket owner. If the account ID that
you provide does not match the actual owner of the bucket, the
request fails with the HTTP status code 403 Forbidden
(access
denied).
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#expires ⇒ Time
The date and time at which the object is no longer cacheable. For more information, see https://www.rfc-editor.org/rfc/rfc7234#section-5.3.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#grant_full_control ⇒ String
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
- This functionality is not supported for Amazon S3 on Outposts.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#grant_read ⇒ String
Allows grantee to read the object data and its metadata.
- This functionality is not supported for Amazon S3 on Outposts.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#grant_read_acp ⇒ String
Allows grantee to read the object ACL.
- This functionality is not supported for Amazon S3 on Outposts.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#grant_write_acp ⇒ String
Allows grantee to write the ACL for the applicable object.
- This functionality is not supported for Amazon S3 on Outposts.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#key ⇒ String
Object key for which the PUT action was initiated.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#metadata ⇒ Hash<String,String>
A map of metadata to store with the object in S3.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#object_lock_legal_hold_status ⇒ String
Specifies whether a legal hold will be applied to this object. For more information about S3 Object Lock, see Object Lock in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#object_lock_mode ⇒ String
The Object Lock mode that you want to apply to this object.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#object_lock_retain_until_date ⇒ Time
The date and time when you want this object's Object Lock to expire. Must be formatted as a timestamp parameter.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#request_payer ⇒ String
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#server_side_encryption ⇒ String
The server-side encryption algorithm that was used when you store
this object in Amazon S3 (for example, AES256
, aws:kms
,
aws:kms:dsse
).
General purpose buckets - You have four mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest by using server-side encryption with other key options. For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.
Directory buckets - For directory buckets, only the
server-side encryption with Amazon S3 managed keys (SSE-S3)
(AES256
) value is supported.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#sse_customer_algorithm ⇒ String
Specifies the algorithm to use when encrypting the object (for
example, AES256
).
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#sse_customer_key ⇒ String
Specifies the customer-provided encryption key for Amazon S3 to use
in encrypting data. This value is used to store the object and then
it is discarded; Amazon S3 does not store the encryption key. The
key must be appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm
header.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#sse_customer_key_md5 ⇒ String
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#ssekms_encryption_context ⇒ String
Specifies the Amazon Web Services KMS Encryption Context to use for
object encryption. The value of this header is a base64-encoded
UTF-8 string holding JSON with the encryption context key-value
pairs. This value is stored as object metadata and automatically
gets passed on to Amazon Web Services KMS for future GetObject
or
CopyObject
operations on this object. This value must be
explicitly added during CopyObject
operations.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#ssekms_key_id ⇒ String
If x-amz-server-side-encryption
has a valid value of aws:kms
or
aws:kms:dsse
, this header specifies the ID (Key ID, Key ARN, or
Key Alias) of the Key Management Service (KMS) symmetric encryption
customer managed key that was used for the object. If you specify
x-amz-server-side-encryption:aws:kms
or
x-amz-server-side-encryption:aws:kms:dsse
, but do not provide
x-amz-server-side-encryption-aws-kms-key-id
, Amazon S3 uses the
Amazon Web Services managed key (aws/s3
) to protect the data. If
the KMS key does not exist in the same account that's issuing the
command, you must use the full ARN and not just the ID.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#storage_class ⇒ String
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
- Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#tagging ⇒ String
The tag-set for the object. The tag-set must be encoded as URL Query parameters. (For example, "Key1=Value1")
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |
#website_redirect_location ⇒ String
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. For information about object metadata, see Object Key and Metadata in the Amazon S3 User Guide.
In the following example, the request header sets the redirect to an object (anotherPage.html) in the same bucket:
x-amz-website-redirect-location: /anotherPage.html
In the following example, the request header sets the object redirect to another website:
x-amz-website-redirect-location: http://www.example.com/
For more information about website hosting in Amazon S3, see Hosting Websites on Amazon S3 and How to Configure Website Page Redirects in the Amazon S3 User Guide.
14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 |
# File 'gems/aws-sdk-s3/lib/aws-sdk-s3/types.rb', line 14275 class PutObjectRequest < Struct.new( :acl, :body, :bucket, :cache_control, :content_disposition, :content_encoding, :content_language, :content_length, :content_md5, :content_type, :checksum_algorithm, :checksum_crc32, :checksum_crc32c, :checksum_sha1, :checksum_sha256, :expires, :grant_full_control, :grant_read, :grant_read_acp, :grant_write_acp, :key, :metadata, :server_side_encryption, :storage_class, :website_redirect_location, :sse_customer_algorithm, :sse_customer_key, :sse_customer_key_md5, :ssekms_key_id, :ssekms_encryption_context, :bucket_key_enabled, :request_payer, :tagging, :object_lock_mode, :object_lock_retain_until_date, :object_lock_legal_hold_status, :expected_bucket_owner) SENSITIVE = [:sse_customer_key, :ssekms_key_id, :ssekms_encryption_context] include Aws::Structure end |