AWS SDK Version 3 for .NET
API Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Interface for accessing AWSMarketplaceMetering

AWS Marketplace Metering Service

This reference provides descriptions of the low-level AWS Marketplace Metering Service API.

AWS Marketplace sellers can use this API to submit usage data for custom usage dimensions.

For information on the permissions you need to use this API, see AWS Marketplace metering and entitlement API permissions in the AWS Marketplace Seller Guide.

Submitting Metering Records

Accepting New Customers

Entitlement and Metering for Paid Container Products

BatchMeterUsage API calls are captured by AWS CloudTrail. You can use Cloudtrail to verify that the SaaS metering records that you sent are accurate by searching for records with the eventName of BatchMeterUsage. You can also use CloudTrail to audit records over time. For more information, see the AWS CloudTrail User Guide.

Inheritance Hierarchy

Amazon.AWSMarketplaceMetering.IAmazonAWSMarketplaceMetering

Namespace: Amazon.AWSMarketplaceMetering
Assembly: AWSSDK.AWSMarketplaceMetering.dll
Version: 3.x.y.z

Syntax

C#
public interface IAmazonAWSMarketplaceMetering
         IAmazonService, IDisposable

The IAmazonAWSMarketplaceMetering type exposes the following members

Methods

Note:

Asynchronous operations (methods ending with Async) in the table below are for .NET 4.5 or higher. For .NET 3.5 the SDK follows the standard naming convention of BeginMethodName and EndMethodName to indicate asynchronous operations - these method pairs are not shown in the table below.

NameDescription
Public Method BatchMeterUsage(BatchMeterUsageRequest)

BatchMeterUsage is called from a SaaS application listed on AWS Marketplace to post metering records for a set of customers.

For identical requests, the API is idempotent; requests can be retried with the same records or a subset of the input records.

Every request to BatchMeterUsage is for one product. If you need to meter usage for multiple products, you must make multiple calls to BatchMeterUsage.

Usage records are expected to be submitted as quickly as possible after the event that is being recorded, and are not accepted more than 6 hours after the event.

BatchMeterUsage can process up to 25 UsageRecords at a time.

A UsageRecord can optionally include multiple usage allocations, to provide customers with usage data split into buckets by tags that you define (or allow the customer to define).

BatchMeterUsage returns a list of UsageRecordResult objects, showing the result for each UsageRecord, as well as a list of UnprocessedRecords, indicating errors in the service side that you should retry.

BatchMeterUsage requests must be less than 1MB in size.

For an example of using BatchMeterUsage, see BatchMeterUsage code example in the AWS Marketplace Seller Guide.

Public Method BatchMeterUsageAsync(BatchMeterUsageRequest, CancellationToken)

BatchMeterUsage is called from a SaaS application listed on AWS Marketplace to post metering records for a set of customers.

For identical requests, the API is idempotent; requests can be retried with the same records or a subset of the input records.

Every request to BatchMeterUsage is for one product. If you need to meter usage for multiple products, you must make multiple calls to BatchMeterUsage.

Usage records are expected to be submitted as quickly as possible after the event that is being recorded, and are not accepted more than 6 hours after the event.

BatchMeterUsage can process up to 25 UsageRecords at a time.

A UsageRecord can optionally include multiple usage allocations, to provide customers with usage data split into buckets by tags that you define (or allow the customer to define).

BatchMeterUsage returns a list of UsageRecordResult objects, showing the result for each UsageRecord, as well as a list of UnprocessedRecords, indicating errors in the service side that you should retry.

BatchMeterUsage requests must be less than 1MB in size.

For an example of using BatchMeterUsage, see BatchMeterUsage code example in the AWS Marketplace Seller Guide.

Public Method DetermineServiceOperationEndpoint(AmazonWebServiceRequest)

Returns the endpoint that will be used for a particular request.

Public Method MeterUsage(MeterUsageRequest)

API to emit metering records. For identical requests, the API is idempotent. It simply returns the metering record ID.

MeterUsage is authenticated on the buyer's AWS account using credentials from the EC2 instance, ECS task, or EKS pod.

MeterUsage can optionally include multiple usage allocations, to provide customers with usage data split into buckets by tags that you define (or allow the customer to define).

Usage records are expected to be submitted as quickly as possible after the event that is being recorded, and are not accepted more than 6 hours after the event.

Public Method MeterUsageAsync(MeterUsageRequest, CancellationToken)

API to emit metering records. For identical requests, the API is idempotent. It simply returns the metering record ID.

MeterUsage is authenticated on the buyer's AWS account using credentials from the EC2 instance, ECS task, or EKS pod.

MeterUsage can optionally include multiple usage allocations, to provide customers with usage data split into buckets by tags that you define (or allow the customer to define).

Usage records are expected to be submitted as quickly as possible after the event that is being recorded, and are not accepted more than 6 hours after the event.

Public Method RegisterUsage(RegisterUsageRequest)

Paid container software products sold through AWS Marketplace must integrate with the AWS Marketplace Metering Service and call the RegisterUsage operation for software entitlement and metering. Free and BYOL products for Amazon ECS or Amazon EKS aren't required to call RegisterUsage, but you may choose to do so if you would like to receive usage data in your seller reports. The sections below explain the behavior of RegisterUsage. RegisterUsage performs two primary functions: metering and entitlement.

  • Entitlement: RegisterUsage allows you to verify that the customer running your paid software is subscribed to your product on AWS Marketplace, enabling you to guard against unauthorized use. Your container image that integrates with RegisterUsage is only required to guard against unauthorized use at container startup, as such a CustomerNotSubscribedException or PlatformNotSupportedException will only be thrown on the initial call to RegisterUsage. Subsequent calls from the same Amazon ECS task instance (e.g. task-id) or Amazon EKS pod will not throw a CustomerNotSubscribedException, even if the customer unsubscribes while the Amazon ECS task or Amazon EKS pod is still running.

  • Metering: RegisterUsage meters software use per ECS task, per hour, or per pod for Amazon EKS with usage prorated to the second. A minimum of 1 minute of usage applies to tasks that are short lived. For example, if a customer has a 10 node Amazon ECS or Amazon EKS cluster and a service configured as a Daemon Set, then Amazon ECS or Amazon EKS will launch a task on all 10 cluster nodes and the customer will be charged: (10 * hourly_rate). Metering for software use is automatically handled by the AWS Marketplace Metering Control Plane -- your software is not required to perform any metering specific actions, other than call RegisterUsage once for metering of software use to commence. The AWS Marketplace Metering Control Plane will also continue to bill customers for running ECS tasks and Amazon EKS pods, regardless of the customers subscription state, removing the need for your software to perform entitlement checks at runtime.

Public Method RegisterUsageAsync(RegisterUsageRequest, CancellationToken)

Paid container software products sold through AWS Marketplace must integrate with the AWS Marketplace Metering Service and call the RegisterUsage operation for software entitlement and metering. Free and BYOL products for Amazon ECS or Amazon EKS aren't required to call RegisterUsage, but you may choose to do so if you would like to receive usage data in your seller reports. The sections below explain the behavior of RegisterUsage. RegisterUsage performs two primary functions: metering and entitlement.

  • Entitlement: RegisterUsage allows you to verify that the customer running your paid software is subscribed to your product on AWS Marketplace, enabling you to guard against unauthorized use. Your container image that integrates with RegisterUsage is only required to guard against unauthorized use at container startup, as such a CustomerNotSubscribedException or PlatformNotSupportedException will only be thrown on the initial call to RegisterUsage. Subsequent calls from the same Amazon ECS task instance (e.g. task-id) or Amazon EKS pod will not throw a CustomerNotSubscribedException, even if the customer unsubscribes while the Amazon ECS task or Amazon EKS pod is still running.

  • Metering: RegisterUsage meters software use per ECS task, per hour, or per pod for Amazon EKS with usage prorated to the second. A minimum of 1 minute of usage applies to tasks that are short lived. For example, if a customer has a 10 node Amazon ECS or Amazon EKS cluster and a service configured as a Daemon Set, then Amazon ECS or Amazon EKS will launch a task on all 10 cluster nodes and the customer will be charged: (10 * hourly_rate). Metering for software use is automatically handled by the AWS Marketplace Metering Control Plane -- your software is not required to perform any metering specific actions, other than call RegisterUsage once for metering of software use to commence. The AWS Marketplace Metering Control Plane will also continue to bill customers for running ECS tasks and Amazon EKS pods, regardless of the customers subscription state, removing the need for your software to perform entitlement checks at runtime.

Public Method ResolveCustomer(ResolveCustomerRequest)

ResolveCustomer is called by a SaaS application during the registration process. When a buyer visits your website during the registration process, the buyer submits a registration token through their browser. The registration token is resolved through this API to obtain a CustomerIdentifier along with the CustomerAWSAccountId and ProductCode.

The API needs to called from the seller account id used to publish the SaaS application to successfully resolve the token.

For an example of using ResolveCustomer, see ResolveCustomer code example in the AWS Marketplace Seller Guide.

Public Method ResolveCustomerAsync(ResolveCustomerRequest, CancellationToken)

ResolveCustomer is called by a SaaS application during the registration process. When a buyer visits your website during the registration process, the buyer submits a registration token through their browser. The registration token is resolved through this API to obtain a CustomerIdentifier along with the CustomerAWSAccountId and ProductCode.

The API needs to called from the seller account id used to publish the SaaS application to successfully resolve the token.

For an example of using ResolveCustomer, see ResolveCustomer code example in the AWS Marketplace Seller Guide.

Version Information

.NET Core App:
Supported in: 3.1

.NET Standard:
Supported in: 2.0

.NET Framework:
Supported in: 4.5, 4.0, 3.5