Verify the instance identity document for an Amazon EC2 instance
If you intend to use the contents of the instance identity document for an important purpose, you should verify its contents and authenticity before using it.
The plaintext instance identity document is accompanied by three hashed and encrypted signatures. You can use these signatures to verify the origin and authenticity of the instance identity document and the information that it includes. The following signatures are provided:
-
Base64-encoded signature—This is a base64-encoded SHA256 hash of the instance identity document that is encrypted using an RSA key pair.
-
PKCS7 signature—This is a SHA1 hash of the instance identity document that is encrypted using a DSA key pair.
-
RSA-2048 signature—This is a SHA256 hash of the instance identity document that is encrypted using an RSA-2048 key pair.
Each signature is available at a different endpoint in the instance metadata. You can use any one of these signatures depending on your hashing and encryption requirements. To verify the signatures, you must use the corresponding Amazon public certificate.
Options
Option 1: Verify instance identity document using the PKCS7 signature
This topic explains how to verify the instance identity document using the PKCS7 signature and the Amazon DSA public certificate.
To verify the instance identity document using the PKCS7 signature and the Amazon DSA public certificate
-
Connect to the instance.
-
Retrieve the PKCS7 signature from the instance metadata and add it to a new file named
pkcs7
along with the required header and footer. Use one of the following commands depending on the IMDS version used by the instance. -
Find the DSA public certificate for your Region in Amazon public certificates for instance identity document signatures and add the contents to a new file named
certificate
. -
Use the OpenSSL smime command to verify the signature. Include the
-verify
option to indicate that the signature needs to be verified, and the-noverify
option to indicate that the certificate does not need to be verified.$
openssl smime -verify -inpkcs7
-inform PEM -certfilecertificate
-noverify | tee documentIf the signature is valid, the
Verification successful
message appears.The command also writes the contents of the instance identity document to a new file named
document
. You can compare the contents of the of the instance identity document from the instance metadata with the contents of this file using the following commands.$
openssl dgst -sha256 <document
$
curl -s -H "X-aws-ec2-metadata-token: $TOKEN" http://169.254.169.254/latest/dynamic/instance-identity/document | openssl dgst -sha256If the signature cannot be verified, contact Amazon Web Services Support.
Prerequisites
This procedure requires the System.Security
Microsoft .NET Core class. To add the
class to your PowerShell session, run the following command.
PS C:\>
Add-Type -AssemblyName System.Security
Note
The command adds the class to the current PowerShell session only. If you start a new session, you must run the command again.
To verify the instance identity document using the PKCS7 signature and the Amazon DSA public certificate
-
Connect to the instance.
-
Retrieve the PKCS7 signature from the instance metadata, convert it to a byte array, and add it to a variable named
$Signature
. Use one of the following commands depending on the IMDS version used by the instance. -
Retrieve the plaintext instance identity document from the instance metadata, convert it to a byte array, and add it to a variable named
$Document
. Use one of the following commands depending on the IMDS version used by the instance. -
Find the DSA public certificate for your Region in Amazon public certificates for instance identity document signatures and add the contents to a new file named
certificate.pem
. -
Extract the certificate from the certificate file and store it in a variable named
$Store
.PS C:\>
$Store
= [Security.Cryptography.X509Certificates.X509Certificate2Collection]::new([Security.Cryptography.X509Certificates.X509Certificate2]::new((Resolve-Pathcertificate.pem
))) -
Verify the signature.
PS C:\>
$SignatureDocument
= [Security.Cryptography.Pkcs.SignedCms]::new()PS C:\>
$SignatureDocument
.Decode($Signature
)PS C:\>
$SignatureDocument
.CheckSignature($Store
, $true)If the signature is valid, the command returns no output. If the signature cannot be verified, the command returns
Exception calling "CheckSignature" with "2" argument(s): "Cannot find the original signer
. If your signature cannot be verified, contact Amazon Web Services Support. -
Validate the content of the instance identity document.
PS C:\>
[Linq.Enumerable]::SequenceEqual($SignatureDocument
.ContentInfo.Content,$Document
)If the content of the instance identity document is valid, the command returns
True
. If instance identity document can't be validated, contact Amazon Web Services Support.
Option 2: Verify instance identity document using the base64-encoded signature
This topic explains how to verify the instance identity document using the base64-encoded signature and the Amazon RSA public certificate.
To validate the instance identity document using the base64-encoded signature and the Amazon RSA public certificate
-
Connect to the instance.
-
Retrieve the base64-encoded signature from the instance metadata, convert it to binary, and add it to a file named
signature
. Use one of the following commands depending on the IMDS version used by the instance. -
Retrieve the plaintext instance identity document from the instance metadata and add it to a file named
document
. Use one of the following commands depending on the IMDS version used by the instance. -
Find the RSA public certificate for your Region in Amazon public certificates for instance identity document signatures and add the contents to a new file named
certificate
. -
Extract the public key from the Amazon RSA public certificate and save it to a file named
key
.$
openssl x509 -pubkey -noout -incertificate
>>key
-
Use OpenSSL dgst command to verify the instance identity document.
$
openssl dgst -sha256 -verifykey
-signaturesignature
document
If the signature is valid, the
Verification successful
message appears.The command also writes the contents of the instance identity document to a new file named
document
. You can compare the contents of the of the instance identity document from the instance metadata with the contents of this file using the following commands.$
openssl dgst -sha256 <document
$
curl -s -H "X-aws-ec2-metadata-token: $TOKEN" http://169.254.169.254/latest/dynamic/instance-identity/document | openssl dgst -sha256If the signature cannot be verified, contact Amazon Web Services Support.
To validate the instance identity document using the base64-encoded signature and the Amazon RSA public certificate
-
Connect to the instance.
-
Retrieve the base64-encoded signature from the instance metadata, convert it to a byte array, and add it to variable named
$Signature
. Use one of the following commands depending on the IMDS version used by the instance. -
Retrieve the plaintext instance identity document from the instance metadata, convert it to a byte array, and add it to a variable named
$Document
. Use one of the following commands depending on the IMDS version used by the instance. -
Find the RSA public certificate for your Region in Amazon public certificates for instance identity document signatures and add the contents to a new file named
certificate.pem
. -
Verify the instance identity document.
PS C:\>
[Security.Cryptography.X509Certificates.X509Certificate2]::new((Resolve-Pathcertificate.pem
)).PublicKey.Key.VerifyData($Document
, 'SHA256',$Signature
)If the signature is valid, the command returns
True
. If the signature cannot be verified, contact Amazon Web Services Support.
Option 3: Verify instance identity document using the RSA-2048 signature
This topic explains how to verify the instance identity document using the RSA-2048 signature and the Amazon RSA-2048 public certificate.
To verify the instance identity document using the RSA-2048 signature and the Amazon RSA-2048 public certificate
-
Connect to the instance.
-
Retrieve the RSA-2048 signature from the instance metadata and add it to a file named
rsa2048
along the required header and footer. Use one of the following commands depending on the IMDS version used by the instance. -
Find the RSA-2048 public certificate for your Region in Amazon public certificates for instance identity document signatures and add the contents to a new file named
certificate
. -
Use the OpenSSL smime command to verify the signature. Include the
-verify
option to indicate that the signature needs to be verified, and the-noverify
option to indicate that the certificate does not need to be verified.$
openssl smime -verify -inrsa2048
-inform PEM -certfilecertificate
-noverify | tee documentIf the signature is valid, the
Verification successful
message appears. If the signature cannot be verified, contact Amazon Web Services Support.
Prerequisites
This procedure requires the System.Security
Microsoft .NET Core class. To add the
class to your PowerShell session, run the following command.
PS C:\>
Add-Type -AssemblyName System.Security
Note
The command adds the class to the current PowerShell session only. If you start a new session, you must run the command again.
To verify the instance identity document using the RSA-2048 signature and the Amazon RSA-2048 public certificate
-
Connect to the instance.
-
Retrieve the RSA-2048 signature from the instance metadata, convert it to a byte array, and add it to a variable named
$Signature
. Use one of the following commands depending on the IMDS version used by the instance. -
Retrieve the plaintext instance identity document from the instance metadata, convert it to a byte array, and add it to a variable named
$Document
. Use one of the following commands depending on the IMDS version used by the instance. -
Find the RSA-2048 public certificate for your Region in Amazon public certificates for instance identity document signatures and add the contents to a new file named
certificate.pem
. -
Extract the certificate from the certificate file and store it in a variable named
$Store
.PS C:\>
$Store
= [Security.Cryptography.X509Certificates.X509Certificate2Collection]::new([Security.Cryptography.X509Certificates.X509Certificate2]::new((Resolve-Pathcertificate.pem
))) -
Verify the signature.
PS C:\>
$SignatureDocument
= [Security.Cryptography.Pkcs.SignedCms]::new()PS C:\>
$SignatureDocument
.Decode($Signature
)PS C:\>
$SignatureDocument
.CheckSignature($Store
, $true)If the signature is valid, the command returns no output. If the signature cannot be verified, the command returns
Exception calling "CheckSignature" with "2" argument(s): "Cannot find the original signer
. If your signature cannot be verified, contact Amazon Web Services Support. -
Validate the content of the instance identity document.
PS C:\>
[Linq.Enumerable]::SequenceEqual($SignatureDocument
.ContentInfo.Content,$Document
)If the content of the instance identity document is valid, the command returns
True
. If instance identity document can't be validated, contact Amazon Web Services Support.