CfnFlowOutput

class aws_cdk.aws_mediaconnect.CfnFlowOutput(scope, id, *, flow_arn, protocol, cidr_allow_list=None, description=None, destination=None, encryption=None, max_latency=None, min_latency=None, name=None, port=None, remote_id=None, smoothing_latency=None, stream_id=None, vpc_interface_attachment=None)

Bases: CfnResource

A CloudFormation AWS::MediaConnect::FlowOutput.

The AWS::MediaConnect::FlowOutput resource defines the destination address, protocol, and port that AWS Elemental MediaConnect sends the ingested video to. Each flow can have up to 50 outputs. An output can have the same protocol or a different protocol from the source. The following protocols are supported: RIST, RTP, RTP-FEC, SRT-listener, SRT-caller, Zixi pull, Zixi push, and Fujitsu-QoS. CDI and ST 2110 JPEG XS protocols are not currently supported by AWS CloudFormation.

CloudformationResource:

AWS::MediaConnect::FlowOutput

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_mediaconnect as mediaconnect

cfn_flow_output = mediaconnect.CfnFlowOutput(self, "MyCfnFlowOutput",
    flow_arn="flowArn",
    protocol="protocol",

    # the properties below are optional
    cidr_allow_list=["cidrAllowList"],
    description="description",
    destination="destination",
    encryption=mediaconnect.CfnFlowOutput.EncryptionProperty(
        role_arn="roleArn",
        secret_arn="secretArn",

        # the properties below are optional
        algorithm="algorithm",
        key_type="keyType"
    ),
    max_latency=123,
    min_latency=123,
    name="name",
    port=123,
    remote_id="remoteId",
    smoothing_latency=123,
    stream_id="streamId",
    vpc_interface_attachment=mediaconnect.CfnFlowOutput.VpcInterfaceAttachmentProperty(
        vpc_interface_name="vpcInterfaceName"
    )
)

Create a new AWS::MediaConnect::FlowOutput.

Parameters:
  • scope (Construct) –

    • scope in which this resource is defined.

  • id (str) –

    • scoped id of the resource.

  • flow_arn (str) – The Amazon Resource Name (ARN) of the flow this output is attached to.

  • protocol (str) – The protocol to use for the output.

  • cidr_allow_list (Optional[Sequence[str]]) – The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

  • description (Optional[str]) – A description of the output. This description is not visible outside of the current AWS account even if the account grants entitlements to other accounts.

  • destination (Optional[str]) – The IP address where you want to send the output.

  • encryption (Union[IResolvable, EncryptionProperty, Dict[str, Any], None]) – The encryption credentials that you want to use for the output.

  • max_latency (Union[int, float, None]) – The maximum latency in milliseconds. This parameter applies only to RIST-based, Zixi-based, and Fujitsu-based streams.

  • min_latency (Union[int, float, None]) – The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

  • name (Optional[str]) – The name of the VPC interface.

  • port (Union[int, float, None]) – The port to use when MediaConnect distributes content to the output.

  • remote_id (Optional[str]) – The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.

  • smoothing_latency (Union[int, float, None]) – The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

  • stream_id (Optional[str]) – The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

  • vpc_interface_attachment (Union[IResolvable, VpcInterfaceAttachmentProperty, Dict[str, Any], None]) – The VPC interface that you want to send your output to.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:

path (str) – The path of the value to delete.

Return type:

None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:
  • key (str) –

  • value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:
  • path (str) –

    • The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.

  • value (Any) –

    • The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:

property_path (str) – The path to the property.

Return type:

None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:
  • property_path (str) – The path of the property.

  • value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:
  • policy (Optional[RemovalPolicy]) –

  • apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true

  • default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

Return type:

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:

attribute_name (str) – The name of the attribute.

Return type:

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) –

  • tree inspector to collect and process attributes.

Return type:

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:

new_logical_id (str) – The new logical ID to use for this stack element.

Return type:

None

to_string()

Returns a string representation of this construct.

Return type:

str

Returns:

a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::MediaConnect::FlowOutput'
attr_output_arn

The ARN of the output.

CloudformationAttribute:

OutputArn

cfn_options

Options for this resource, such as condition, update policy etc.

cfn_resource_type

AWS resource type.

cidr_allow_list

The range of IP addresses that are allowed to initiate output requests to this flow.

Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-cidrallowlist

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

description

A description of the output.

This description is not visible outside of the current AWS account even if the account grants entitlements to other accounts.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-description

destination

The IP address where you want to send the output.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-destination

encryption

The encryption credentials that you want to use for the output.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-encryption

flow_arn

The Amazon Resource Name (ARN) of the flow this output is attached to.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-flowarn

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

max_latency

The maximum latency in milliseconds.

This parameter applies only to RIST-based, Zixi-based, and Fujitsu-based streams.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-maxlatency

min_latency

The minimum latency in milliseconds for SRT-based streams.

In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-minlatency

name

The name of the VPC interface.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-name

node

The construct tree node associated with this construct.

port

The port to use when MediaConnect distributes content to the output.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-port

protocol

The protocol to use for the output.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-protocol

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

remote_id

The identifier that is assigned to the Zixi receiver.

This parameter applies only to outputs that use Zixi pull.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-remoteid

smoothing_latency

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-smoothinglatency

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

stream_id

The stream ID that you want to use for this transport.

This parameter applies only to Zixi and SRT caller-based streams.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-streamid

vpc_interface_attachment

The VPC interface that you want to send your output to.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowoutput.html#cfn-mediaconnect-flowoutput-vpcinterfaceattachment

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_construct(x)

Return whether the given object is a Construct.

Parameters:

x (Any) –

Return type:

bool

EncryptionProperty

class CfnFlowOutput.EncryptionProperty(*, role_arn, secret_arn, algorithm=None, key_type=None)

Bases: object

Information about the encryption of the flow.

Parameters:
  • role_arn (str) – The Amazon Resource Name (ARN) of the role that you created during setup (when you set up MediaConnect as a trusted entity).

  • secret_arn (str) – The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.

  • algorithm (Optional[str]) – The type of algorithm that is used for static key encryption (such as aes128, aes192, or aes256). If you are using SPEKE or SRT-password encryption, this property must be left blank.

  • key_type (Optional[str]) – The type of key that is used for the encryption. If you don’t specify a keyType value, the service uses the default setting ( static-key ). Valid key types are: static-key , speke , and srt-password .

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-encryption.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_mediaconnect as mediaconnect

encryption_property = mediaconnect.CfnFlowOutput.EncryptionProperty(
    role_arn="roleArn",
    secret_arn="secretArn",

    # the properties below are optional
    algorithm="algorithm",
    key_type="keyType"
)

Attributes

algorithm

The type of algorithm that is used for static key encryption (such as aes128, aes192, or aes256).

If you are using SPEKE or SRT-password encryption, this property must be left blank.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-encryption.html#cfn-mediaconnect-flowoutput-encryption-algorithm

key_type

The type of key that is used for the encryption.

If you don’t specify a keyType value, the service uses the default setting ( static-key ). Valid key types are: static-key , speke , and srt-password .

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-encryption.html#cfn-mediaconnect-flowoutput-encryption-keytype

role_arn

The Amazon Resource Name (ARN) of the role that you created during setup (when you set up MediaConnect as a trusted entity).

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-encryption.html#cfn-mediaconnect-flowoutput-encryption-rolearn

secret_arn

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-encryption.html#cfn-mediaconnect-flowoutput-encryption-secretarn

VpcInterfaceAttachmentProperty

class CfnFlowOutput.VpcInterfaceAttachmentProperty(*, vpc_interface_name=None)

Bases: object

The VPC interface that you want to send your output to.

Parameters:

vpc_interface_name (Optional[str]) – The name of the VPC interface that you want to send your output to.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-vpcinterfaceattachment.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_mediaconnect as mediaconnect

vpc_interface_attachment_property = mediaconnect.CfnFlowOutput.VpcInterfaceAttachmentProperty(
    vpc_interface_name="vpcInterfaceName"
)

Attributes

vpc_interface_name

The name of the VPC interface that you want to send your output to.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediaconnect-flowoutput-vpcinterfaceattachment.html#cfn-mediaconnect-flowoutput-vpcinterfaceattachment-vpcinterfacename