CfnFlowVpcInterface

class aws_cdk.aws_mediaconnect.CfnFlowVpcInterface(scope, id, *, flow_arn, name, role_arn, security_group_ids, subnet_id)

Bases: CfnResource

A CloudFormation AWS::MediaConnect::FlowVpcInterface.

The AWS::MediaConnect::FlowVpcInterface resource is a connection between your AWS Elemental MediaConnect flow and a virtual private cloud (VPC) that you created using the Amazon Virtual Private Cloud service.

To avoid streaming your content over the public internet, you can add up to two VPC interfaces to your flow and use those connections to transfer content between your VPC and MediaConnect.

You can update an existing flow to add a VPC interface. If you haven’t created the flow yet, you must create the flow with a temporary standard source by doing the following:

Use CloudFormation to create a flow with a standard source that uses to the flow’s public IP address.
Use CloudFormation to create a VPC interface to add to this flow. This can also be done as part of the previous step.
After CloudFormation has created the flow and the VPC interface, update the source to point to the VPC interface that you created.

CloudformationResource:: AWS::MediaConnect::FlowVpcInterface
Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowvpcinterface.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_mediaconnect as mediaconnect

cfn_flow_vpc_interface = mediaconnect.CfnFlowVpcInterface(self, "MyCfnFlowVpcInterface",
    flow_arn="flowArn",
    name="name",
    role_arn="roleArn",
    security_group_ids=["securityGroupIds"],
    subnet_id="subnetId"
)

Create a new AWS::MediaConnect::FlowVpcInterface.

Parameters:

scope (Construct) –
- scope in which this resource is defined.
id (str) –
- scoped id of the resource.
flow_arn (str) – The Amazon Resource Name (ARN) of the flow.
name (str) – The name of the VPC Interface. This value must be unique within the current flow.
role_arn (str) – The Amazon Resource Name (ARN) of the role that you created when you set up MediaConnect as a trusted service.
security_group_ids (Sequence[str]) – The VPC security groups that you want MediaConnect to use for your VPC configuration. You must include at least one security group in the request.
subnet_id (str) – The subnet IDs that you want to use for your VPC interface. A range of IP addresses in your VPC. When you create your VPC, you specify a range of IPv4 addresses for the VPC in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16. This is the primary CIDR block for your VPC. When you create a subnet for your VPC, you specify the CIDR block for the subnet, which is a subset of the VPC CIDR block. The subnets that you use across all VPC interfaces on the flow must be in the same Availability Zone as the flow.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

Return type:

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:: attribute_name (str) – The name of the attribute.
Return type:: Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) –

tree inspector to collect and process attributes.

Return type:

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::MediaConnect::FlowVpcInterface'

attr_network_interface_ids

The IDs of the network interfaces that MediaConnect created in your account.

CloudformationAttribute:: NetworkInterfaceIds

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

flow_arn

The Amazon Resource Name (ARN) of the flow.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowvpcinterface.html#cfn-mediaconnect-flowvpcinterface-flowarn

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

name

The name of the VPC Interface.

This value must be unique within the current flow.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowvpcinterface.html#cfn-mediaconnect-flowvpcinterface-name

node: The construct tree node associated with this construct.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

role_arn

The Amazon Resource Name (ARN) of the role that you created when you set up MediaConnect as a trusted service.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowvpcinterface.html#cfn-mediaconnect-flowvpcinterface-rolearn

security_group_ids

The VPC security groups that you want MediaConnect to use for your VPC configuration.

You must include at least one security group in the request.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowvpcinterface.html#cfn-mediaconnect-flowvpcinterface-securitygroupids

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

subnet_id

The subnet IDs that you want to use for your VPC interface.

A range of IP addresses in your VPC. When you create your VPC, you specify a range of IPv4 addresses for the VPC in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16. This is the primary CIDR block for your VPC. When you create a subnet for your VPC, you specify the CIDR block for the subnet, which is a subset of the VPC CIDR block.

The subnets that you use across all VPC interfaces on the flow must be in the same Availability Zone as the flow.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediaconnect-flowvpcinterface.html#cfn-mediaconnect-flowvpcinterface-subnetid

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_construct(x)

Return whether the given object is a Construct.

Parameters:

x (Any) –

Return type:

bool