Monitor and programmatically respond to the events emitted by your EC2 Fleet or Spot Fleet using Amazon EventBridge
When the state of an EC2 Fleet or Spot Fleet changes, it emits a notification. The notification is made available as an event that is sent to Amazon EventBridge (formerly known as Amazon CloudWatch Events). Events are emitted on a best effort basis.
You can use Amazon EventBridge to create rules that trigger programmatic actions in response to an event. For example, you can create two EventBridge rules: one triggered when a fleet state changes, and another triggered when an instance in the fleet is terminated. In this example, you can configure the first rule so that, if the fleet state changes, the rule invokes an SNS topic, sending an email notification to you. You can configure the second rule so that, if an instance in the fleet is terminated, the rule invokes a Lambda function to launch a new instance.
Note
Only fleets of type maintain
and request
emit
events. Fleets of type instant
do not emit events because they
submit synchronous one-time requests, and the state of the fleet is known
immediately in the response. To use Amazon EventBridge to monitor fleet events, the
request type must be maintain
or request
.
For instructions on how to describe a fleet's event history, see Describe the event history for your EC2 Fleet.
Topics
Create Amazon EventBridge rules to monitor EC2 Fleet or Spot Fleet events
When a state change notification is emitted for an EC2 Fleet or Spot Fleet, it is sent as an event to Amazon EventBridge as a JSON file. If EventBridge detects an event pattern that matches a pattern defined in a rule, EventBridge invokes the target (or targets) specified in the rule.
You can write EventBridge rules to automate actions based on matching event patterns.
The following fields in the event form the event pattern that is defined in the rule:
"source": "aws.ec2fleet"
-
Identifies that the event is from EC2 Fleet.
"detail-type": "
EC2 Fleet State Change
"-
Identifies the event type.
"detail": { "sub-type": "
submitted
" }-
Identifies the event sub-type.
For the list of EC2 Fleet and Spot Fleet events and example event data, see EC2 Fleet event types and Spot Fleet event types.
Examples
Create an EventBridge rule to send a notification
The following example creates an EventBridge rule to send an email, text message,
or mobile push notification every time that Amazon EC2 emits an EC2 Fleet state change
notification. The signal in this example is emitted as an EC2 Fleet
State Change
event, which triggers the action defined by the
rule.
Prerequisite
Before creating the EventBridge rule, you must create the Amazon SNS topic for the email, text message, or mobile push notification.
To create an EventBridge rule to send a notification when an EC2 Fleet state changes
Open the Amazon EventBridge console at https://console.amazonaws.cn/events/
. -
Choose Create rule.
-
For Define rule detail, do the following:
-
Enter a Name for the rule, and, optionally, a description.
A rule can't have the same name as another rule in the same Region and on the same event bus.
-
For Event bus, choose default. When an Amazon service in your account generates an event, it always goes to your account's default event bus.
-
For Rule type, choose Rule with an event pattern.
-
Choose Next.
-
-
For Build event pattern, do the following:
-
For Event source, choose Amazon events or EventBridge partner events.
-
For Event pattern, for this example you’ll specify the following event pattern to match the
EC2 Fleet Instance Change
event.{ "source": ["aws.ec2fleet"], "detail-type": ["EC2 Fleet Instance Change"] }
To add the event pattern, you can either use a template by choosing Event pattern form, or specify your own pattern by choosing Custom pattern (JSON editor), as follows:
-
To use a template to create the event pattern, do the following:
-
Choose Event pattern form.
-
For Event source, choose Amazon services.
-
For Amazon Service, choose EC2 Fleet.
-
For Event type, choose EC2 Fleet Instance Change.
-
To customize the template, choose Edit pattern and make your changes to match the example event pattern.
-
-
(Alternative) To specify a custom event pattern, do the following:
-
Choose Custom pattern (JSON editor).
-
In the Event pattern box, add the event pattern for this example.
-
-
-
Choose Next.
-
-
For Select target(s), do the following:
-
For Target types, choose Amazon service.
-
For Select a target, choose SNS topic to send an email, text message, or mobile push notification when the event occurs.
-
For Topic, choose an existing topic. You first need to create an Amazon SNS topic using the Amazon SNS console. For more information, see Using Amazon SNS for application-to-person (A2P) messaging in the Amazon Simple Notification Service Developer Guide.
-
(Optional) Under Additional settings, you can optionally configure additional settings. For more information, see Creating Amazon EventBridge rules that react to events (step 16) in the Amazon EventBridge User Guide.
-
Choose Next.
-
-
(Optional) For Tags, you can optionally assign one or more tags to your rule, and then choose Next.
-
For Review and create, do the following:
-
Review the details of the rule and modify them as necessary.
-
Choose Create rule.
-
For more information, see Amazon EventBridge rules and Amazon EventBridge event patterns in the Amazon EventBridge User Guide
Create an EventBridge rule to trigger a Lambda function
The following example creates an EventBridge rule to trigger a Lambda function
every time that Amazon EC2 emits an EC2 Fleet instance change notification for when an
instance is launched. The signal in this example is emitted as an EC2
Fleet Instance Change
event, sub-type launched
,
which triggers the action defined by the rule.
Before creating the EventBridge rule, you must create the Lambda function.
To create the Lambda function to use in the EventBridge rule
Open the Amazon Lambda console at https://console.amazonaws.cn/lambda/
. -
Choose Create function.
-
Enter a name for your function, configure the code, and then choose Create function.
For more information about using Lambda, see Create a Lambda function with the console in the Amazon Lambda Developer Guide.
To create an EventBridge rule to trigger a Lambda function when an instance in an EC2 Fleet changes state
Open the Amazon EventBridge console at https://console.amazonaws.cn/events/
. -
Choose Create rule.
-
For Define rule detail, do the following:
-
Enter a Name for the rule, and, optionally, a description.
A rule can't have the same name as another rule in the same Region and on the same event bus.
-
For Event bus, choose default. When an Amazon service in your account generates an event, it always goes to your account's default event bus.
-
For Rule type, choose Rule with an event pattern.
-
Choose Next.
-
-
For Build event pattern, do the following:
-
For Event source, choose Amazon events or EventBridge partner events.
-
For Event pattern, for this example you’ll specify the following event pattern to match the
EC2 Fleet Instance Change
event andlaunched
sub-type.{ "source": ["aws.ec2fleet"], "detail-type": ["EC2 Fleet Instance Change"], "detail": { "sub-type": ["launched"] }
To add the event pattern, you can either use a template by choosing Event pattern form, or specify your own pattern by choosing Custom pattern (JSON editor), as follows:
-
To use a template to create the event pattern, do the following:
-
Choose Event pattern form.
-
For Event source, choose Amazon services.
-
For Amazon Service, choose EC2 Fleet.
-
For Event type, choose EC2 Fleet Instance Change.
-
Choose Edit pattern, and add
"detail": {"sub-type": ["launched"]
to match the example event pattern. For proper JSON format, insert a comma (,
) after the preceding square bracket (]
).
-
-
(Alternative) To specify a custom event pattern, do the following:
-
Choose Custom pattern (JSON editor).
-
In the Event pattern box, add the event pattern for this example.
-
-
-
Choose Next.
-
-
For Select target(s), do the following:
-
For Target types, choose Amazon service.
-
For Select a target, choose SNS topic to send an email, text message, or mobile push notification when the event occurs.
-
For Topic, choose Lambda function, and for Function, choose the function that you created to respond when the event occurs.
-
(Optional) Under Additional settings, you can optionally configure additional settings. For more information, see Creating Amazon EventBridge rules that react to events (step 16) in the Amazon EventBridge User Guide.
-
Choose Next.
-
-
(Optional) For Tags, you can optionally assign one or more tags to your rule, and then choose Next.
-
For Review and create, do the following:
-
Review the details of the rule and modify them as necessary.
-
Choose Create rule.
-
For a tutorial on how to create a Lambda function and an EventBridge rule that runs the Lambda function, see Tutorial: Log the State of an Amazon EC2 Instance Using EventBridge in the Amazon Lambda Developer Guide.
EC2 Fleet event types
There are five EC2 Fleet event types. For each event type, there are several sub-types.
Event types
EC2 Fleet State Change
EC2 Fleet sends an EC2 Fleet State Change
event to Amazon EventBridge when
an EC2 Fleet changes state.
The following is example data for this event.
{
"version": "0",
"id": "715ed6b3-b8fc-27fe-fad6-528c7b8bf8a2",
"detail-type": "EC2 Fleet State Change",
"source": "aws.ec2fleet",
"account": "123456789012",
"time": "2020-11-09T09:00:20Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:fleet/fleet-598fb973-87b7-422d-be4d-6b0809bfff0a"
],
"detail": {
"sub-type": "active"
}
}
The possible values for sub-type
are:
active
-
The EC2 Fleet request has been validated and Amazon EC2 is attempting to maintain the target number of running instances.
deleted
-
The EC2 Fleet request is deleted and has no running instances. The EC2 Fleet will be deleted two days after its instances are terminated.
deleted_running
-
The EC2 Fleet request is deleted and does not launch additional instances. Its existing instances continue to run until they are interrupted or terminated. The request remains in this state until all instances are interrupted or terminated.
deleted_terminating
-
The EC2 Fleet request is deleted and its instances are terminating. The request remains in this state until all instances are terminated.
expired
-
The EC2 Fleet request has expired. If the request was created with
TerminateInstancesWithExpiration
set, a subsequentterminated
event indicates that the instances are terminated. modify_in_progress
-
The EC2 Fleet request is being modified. The request remains in this state until the modification is fully processed.
modify_succeeded
-
The EC2 Fleet request was modified.
submitted
-
The EC2 Fleet request is being evaluated and Amazon EC2 is preparing to launch the target number of instances.
progress
-
The EC2 Fleet request is in the process of being fulfilled.
EC2 Fleet Spot Instance Request Change
EC2 Fleet sends an EC2 Fleet Spot Instance Request Change
event to
Amazon EventBridge when a Spot Instance request in the fleet changes state.
The following is example data for this event.
{
"version": "0",
"id": "19331f74-bf4b-a3dd-0f1b-ddb1422032b9",
"detail-type": "EC2 Fleet Spot Instance Request Change",
"source": "aws.ec2fleet",
"account": "123456789012",
"time": "2020-11-09T09:00:05Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:fleet/fleet-83fd4e48-552a-40ef-9532-82a3acca5f10"
],
"detail": {
"spot-instance-request-id": "sir-rmqske6h",
"description": "SpotInstanceRequestId sir-rmqske6h, PreviousState: cancelled_running",
"sub-type": "cancelled"
}
}
The possible values for sub-type
are:
active
-
The Spot Instance request is fulfilled and has an associated Spot Instance.
cancelled
-
You cancelled the Spot Instance request, or the Spot Instance request expired.
disabled
-
You stopped the Spot Instance.
submitted
-
The Spot Instance request is submitted.
EC2 Fleet Instance Change
EC2 Fleet sends an EC2 Fleet Instance Change
event to Amazon EventBridge
when an instance in the fleet changes state.
The following is example data for this event.
{
"version": "0",
"id": "542ce428-c8f1-0608-c015-e8ed6522c5bc",
"detail-type": "EC2 Fleet Instance Change",
"source": "aws.ec2fleet",
"account": "123456789012",
"time": "2020-11-09T09:00:23Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:fleet/fleet-598fb973-87b7-422d-be4d-6b0809bfff0a"
],
"detail": {
"instance-id": "i-0c594155dd5ff1829",
"description": "{\"instanceType\":\"c5.large\",\"image\":\"ami-6057e21a\",\"productDescription\":\"Linux/UNIX\",\"availabilityZone\":\"us-east-1d\"}",
"sub-type": "launched"
}
}
The possible values for sub-type
are:
launched
-
A new instance was launched.
terminated
-
The instance was terminated.
termination_notified
-
An instance termination notification was sent when a Spot Instance was terminated by Amazon EC2 during scale-down, when the target capacity of the fleet was modified down, for example, from a target capacity of 4 to a target capacity of 3.
EC2 Fleet Information
EC2 Fleet sends an EC2 Fleet Information
event to Amazon EventBridge when
there is an error during fulfillment. The information event does not block
the fleet from attempting to fulfil its target capacity.
The following is example data for this event.
{
"version": "0",
"id": "76529817-d605-4571-7224-d36cc1b2c0c4",
"detail-type": "EC2 Fleet Information",
"source": "aws.ec2fleet",
"account": "123456789012",
"time": "2020-11-09T08:17:07Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:fleet/fleet-8becf5fe-bb9e-415d-8f54-3fa5a8628b91"
],
"detail": {
"description": "c4.xlarge, ami-0947d2ba12ee1ff75, Linux/UNIX, us-east-1a, Spot price in either SpotFleetRequestConfigData or SpotFleetLaunchSpecification or LaunchTemplate or LaunchTemplateOverrides is less than Spot market price $0.0619",
"sub-type": "launchSpecUnusable"
}
}
The possible values for sub-type
are:
fleetProgressHalted
-
The price in every launch specification is not valid because it is below the Spot price (all the launch specifications have produced
launchSpecUnusable
events). A launch specification might become valid if the Spot price changes. launchSpecTemporarilyBlacklisted
-
The configuration is not valid and several attempts to launch instances have failed. For more information, see the description of the event.
launchSpecUnusable
-
The price in a launch specification is not valid because it is below the Spot price.
registerWithLoadBalancersFailed
-
An attempt to register instances with load balancers failed. For more information, see the description of the event.
EC2 Fleet Error
EC2 Fleet sends an EC2 Fleet Error
event to Amazon EventBridge when there is
an error during fulfillment. The error event blocks the fleet from
attempting to fulfil its target capacity.
The following is example data for this event.
{
"version": "0",
"id": "69849a22-6d0f-d4ce-602b-b47c1c98240e",
"detail-type": "EC2 Fleet Error",
"source": "aws.ec2fleet",
"account": "123456789012",
"time": "2020-10-07T01:44:24Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:fleet/fleet-9bb19bc6-60d3-4fd2-ae47-d33e68eafa08"
],
"detail": {
"description": "m3.large, ami-00068cd7555f543d5, Linux/UNIX: IPv6 is not supported for the instance type 'm3.large'. ",
"sub-type": "spotFleetRequestConfigurationInvalid"
}
}
The possible values for sub-type
are:
iamFleetRoleInvalid
-
The EC2 Fleet does not have the required permissions to either launch or terminate an instance.
allLaunchSpecsTemporarilyBlacklisted
-
None of the configurations are valid, and several attempts to launch instances have failed. For more information, see the description of the event.
spotInstanceCountLimitExceeded
-
You’ve reached the limit on the number of Spot Instances that you can launch.
spotFleetRequestConfigurationInvalid
-
The configuration is not valid. For more information, see the description of the event.
Spot Fleet event types
There are five Spot Fleet event types. For each event type, there are several sub-types.
Event types
EC2 Spot Fleet State Change
Spot Fleet sends an EC2 Spot Fleet State Change
event to Amazon EventBridge
when a Spot Fleet changes state.
The following is example data for this event.
{
"version": "0",
"id": "d1af1091-6cc3-2e24-203a-3b870e455d5b",
"detail-type": "EC2 Spot Fleet State Change",
"source": "aws.ec2spotfleet",
"account": "123456789012",
"time": "2020-11-09T08:57:06Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:spot-fleet-request/sfr-4b6d274d-0cea-4b2c-b3be-9dc627ad1f55"
],
"detail": {
"sub-type": "submitted"
}
}
The possible values for sub-type
are:
active
-
The Spot Fleet request has been validated and Amazon EC2 is attempting to maintain the target number of running instances.
cancelled
-
The Spot Fleet request is canceled and has no running instances. The Spot Fleet will be deleted two days after its instances are terminated.
cancelled_running
-
The Spot Fleet request is canceled and does not launch additional instances. Its existing instances continue to run until they are interrupted or terminated. The request remains in this state until all instances are interrupted or terminated.
cancelled_terminating
-
The Spot Fleet request is canceled and its instances are terminating. The request remains in this state until all instances are terminated.
expired
-
The Spot Fleet request has expired. If the request was created with
TerminateInstancesWithExpiration
set, a subsequentterminated
event indicates that the instances are terminated. modify_in_progress
-
The Spot Fleet request is being modified. The request remains in this state until the modification is fully processed.
modify_succeeded
-
The Spot Fleet request was modified.
submitted
-
The Spot Fleet request is being evaluated and Amazon EC2 is preparing to launch the target number of instances.
progress
-
The Spot Fleet request is in the process of being fulfilled.
EC2 Spot Fleet Spot Instance Request Change
Spot Fleet sends an EC2 Spot Fleet Spot Instance Request Change
event to Amazon EventBridge when a Spot Instance request in the fleet changes state.
The following is example data for this event.
{
"version": "0",
"id": "cd141ef0-14af-d670-a71d-fe46e9971bd2",
"detail-type": "EC2 Spot Fleet Spot Instance Request Change",
"source": "aws.ec2spotfleet",
"account": "123456789012",
"time": "2020-11-09T08:53:21Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:spot-fleet-request/sfr-a98d2133-941a-47dc-8b03-0f94c6852ad1"
],
"detail": {
"spot-instance-request-id": "sir-a2w9gc5h",
"description": "SpotInstanceRequestId sir-a2w9gc5h, PreviousState: cancelled_running",
"sub-type": "cancelled"
}
}
The possible values for sub-type
are:
active
-
The Spot Instance request is fulfilled and has an associated Spot Instance.
cancelled
-
You cancelled the Spot Instance request, or the Spot Instance request expired.
disabled
-
You stopped the Spot Instance.
submitted
-
The Spot Instance request is submitted.
EC2 Spot Fleet Instance Change
Spot Fleet sends an EC2 Spot Fleet Instance Change
event to
Amazon EventBridge when an instance in the fleet changes state.
The following is example data for this event.
{
"version": "0",
"id": "11591686-5bd7-bbaa-eb40-d46529c2710f",
"detail-type": "EC2 Spot Fleet Instance Change",
"source": "aws.ec2spotfleet",
"account": "123456789012",
"time": "2020-11-09T07:25:02Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:spot-fleet-request/sfr-c8a764a4-bedc-4b62-af9c-0095e6e3ba61"
],
"detail": {
"instance-id": "i-08b90df1e09c30c9b",
"description": "{\"instanceType\":\"r4.2xlarge\",\"image\":\"ami-032930428bf1abbff\",\"productDescription\":\"Linux/UNIX\",\"availabilityZone\":\"us-east-1a\"}",
"sub-type": "launched"
}
}
The possible values for sub-type
are:
launched
-
A new instance was launched.
terminated
-
The instance was terminated.
termination_notified
-
An instance termination notification was sent when a Spot Instance was terminated by Amazon EC2 during scale-down, when the target capacity of the fleet was modified down, for example, from a target capacity of 4 to a target capacity of 3.
EC2 Spot Fleet Information
Spot Fleet sends an EC2 Spot Fleet Information
event to Amazon EventBridge
when there is an error during fulfillment. The information event does not
block the fleet from attempting to fulfil its target capacity.
The following is example data for this event.
{
"version": "0",
"id": "73a60f70-3409-a66c-635c-7f66c5f5b669",
"detail-type": "EC2 Spot Fleet Information",
"source": "aws.ec2spotfleet",
"account": "123456789012",
"time": "2020-11-08T20:56:12Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:spot-fleet-request/sfr-2531ea06-af18-4647-8757-7d69c94971b1"
],
"detail": {
"description": "r3.8xlarge, ami-032930428bf1abbff, Linux/UNIX, us-east-1a, Spot bid price is less than Spot market price $0.5291",
"sub-type": "launchSpecUnusable"
}
}
The possible values for sub-type
are:
fleetProgressHalted
-
The price in every launch specification is not valid because it is below the Spot price (all the launch specifications have produced
launchSpecUnusable
events). A launch specification might become valid if the Spot price changes. launchSpecTemporarilyBlacklisted
-
The configuration is not valid and several attempts to launch instances have failed. For more information, see the description of the event.
launchSpecUnusable
-
The price in a launch specification is not valid because it is below the Spot price.
registerWithLoadBalancersFailed
-
An attempt to register instances with load balancers failed. For more information, see the description of the event.
EC2 Spot Fleet Error
Spot Fleet sends an EC2 Spot Fleet Error
event to Amazon EventBridge when
there is an error during fulfillment. The error event blocks the fleet from
attempting to fulfil its target capacity.
The following is example data for this event.
{
"version": "0",
"id": "10adc4e7-675c-643e-125c-5bfa1b1ba5d2",
"detail-type": "EC2 Spot Fleet Error",
"source": "aws.ec2spotfleet",
"account": "123456789012",
"time": "2020-11-09T06:56:07Z",
"region": "us-east-1",
"resources": [
"arn:aws:ec2:us-east-1:123456789012:spot-fleet-request/sfr-38725d30-25f1-4f30-83ce-2907c56dba17"
],
"detail": {
"description": "r4.2xlarge, ami-032930428bf1abbff, Linux/UNIX: The associatePublicIPAddress parameter can only be specified for the network interface with DeviceIndex 0. ",
"sub-type": "spotFleetRequestConfigurationInvalid"
}
}
The possible values for sub-type
are:
iamFleetRoleInvalid
-
The Spot Fleet does not have the required permissions to either launch or terminate an instance.
allLaunchSpecsTemporarilyBlacklisted
-
None of the configurations are valid, and several attempts to launch instances have failed. For more information, see the description of the event.
spotInstanceCountLimitExceeded
-
You’ve reached the limit on the number of Spot Instances that you can launch.
spotFleetRequestConfigurationInvalid
-
The configuration is not valid. For more information, see the description of the event.