Installing past releases of the Amazon CLI version 2 - Amazon Command Line Interface
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Installing past releases of the Amazon CLI version 2

This topic describes how to install the past releases of the Amazon Command Line Interface version 2 (Amazon CLI) on supported operating systems. For information on the Amazon CLI version 2 releases, see the Amazon CLI version 2 Changelog on GitHub.

Amazon CLI version 2 installation instructions:

Installation requirements

  • You know which release of the Amazon CLI version 2 you'd like to install. For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  • You must be able to extract or "unzip" the downloaded package. If your operating system doesn't have the built-in unzip command, use an equivalent.

  • The Amazon CLI version 2 uses glibc, groff, and less. These are included by default in most major distributions of Linux.

  • We support the Amazon CLI version 2 on 64-bit versions of recent distributions of CentOS, Fedora, Ubuntu, Amazon Linux 1, Amazon Linux 2 and Linux ARM.

  • Because Amazon doesn't maintain third-party repositories, we can’t guarantee that they contain the latest version of the Amazon CLI.

Installation instructions

Follow these steps from the command line to install the Amazon CLI on Linux.

We provide the steps in one easy to copy and paste group based on whether you use 64-bit Linux or Linux ARM. See the descriptions of each line in the steps that follow.

Linux x86 (64-bit)
Note

(Optional) The following command block downloads and installs the Amazon CLI without first verifying the integrity of your download. To verify the integrity of your download, use the below step by step instructions.

For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

To install the Amazon CLI, run the following commands.

To specify a version, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip resulting in the following command:

$ curl "https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip" -o "awscliv2.zip" unzip awscliv2.zip sudo ./aws/install

To update your current installation of the Amazon CLI, add your existing symlink and installer information to construct the install command using the --bin-dir, --install-dir, and --update parameters. The following command block uses an example symlink of /usr/local/bin and example installer location of /usr/local/aws-cli.

$ curl "https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip" -o "awscliv2.zip" unzip awscliv2.zip sudo ./aws/install --bin-dir /usr/local/bin --install-dir /usr/local/aws-cli --update
Linux ARM
Note

(Optional) The following command block downloads and installs the Amazon CLI without first verifying the integrity of your download. To verify the integrity of your download, use the below step by step instructions.

For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

To install the Amazon CLI, run the following commands.

To specify a version, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip resulting in the following command:

$ curl "https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip" -o "awscliv2.zip" unzip awscliv2.zip sudo ./aws/install

To update your current installation of the Amazon CLI, add your existing symlink and installer information to construct the install command using the --bin-dir, --install-dir, and --update parameters. The following command block uses an example symlink of /usr/local/bin and example installer location of /usr/local/aws-cli.

$ curl "https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip" -o "awscliv2.zip" unzip awscliv2.zip sudo ./aws/install --bin-dir /usr/local/bin --install-dir /usr/local/aws-cli --update
  1. Download the installation file in one of the following ways:

    Linux x86 (64-bit)
    • Use the curl command – The -o option specifies the file name that the downloaded package is written to. The options on the following example command write the downloaded file to the current directory with the local name awscliv2.zip.

      To specify a version, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip resulting in the following command:

      $ curl "https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip" -o "awscliv2.zip"

      For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

    • Downloading from the URL

      In your browser, download your specific version of the Amazon CLI by appending a hyphen and the version number to the filename.

      https://awscli.amazonaws.com/awscli-exe-linux-x86_64-version.number.zip

      For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip resulting in the following link: https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip

    Linux ARM
    • Use the curl command – The -o option specifies the file name that the downloaded package is written to. The options on the following example command write the downloaded file to the current directory with the local name awscliv2.zip.

      To specify a version, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip resulting in the following command:

      $ curl "https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip" -o "awscliv2.zip" unzip awscliv2.zip sudo ./aws/install
    • Downloading from the URL

      In your browser, download your specific version of the Amazon CLI by appending a hyphen and the version number to the filename.

      https://awscli.amazonaws.com/awscli-exe-linux-aarch64-version.number.zip

      For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip resulting in the following link: https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip

  2. (Optional) Verifying the integrity of your downloaded zip file

    If you chose to manually download the Amazon CLI installer package .zip in the above steps, you can use the following steps to verify the signatures by using the GnuPG tool.

    The Amazon CLI installer package .zip files are cryptographically signed using PGP signatures. If there is any damage or alteration of the files, this verification fails and you should not proceed with installation.

    1. Download and install the gpg command using your package manager. For more information about GnuPG, see the GnuPG website.

    2. To create the public key file, create a text file and paste in the following text.

      -----BEGIN PGP PUBLIC KEY BLOCK----- mQINBF2Cr7UBEADJZHcgusOJl7ENSyumXh85z0TRV0xJorM2B/JL0kHOyigQluUG ZMLhENaG0bYatdrKP+3H91lvK050pXwnO/R7fB/FSTouki4ciIx5OuLlnJZIxSzx PqGl0mkxImLNbGWoi6Lto0LYxqHN2iQtzlwTVmq9733zd3XfcXrZ3+LblHAgEt5G TfNxEKJ8soPLyWmwDH6HWCnjZ/aIQRBTIQ05uVeEoYxSh6wOai7ss/KveoSNBbYz gbdzoqI2Y8cgH2nbfgp3DSasaLZEdCSsIsK1u05CinE7k2qZ7KgKAUIcT/cR/grk C6VwsnDU0OUCideXcQ8WeHutqvgZH1JgKDbznoIzeQHJD238GEu+eKhRHcz8/jeG 94zkcgJOz3KbZGYMiTh277Fvj9zzvZsbMBCedV1BTg3TqgvdX4bdkhf5cH+7NtWO lrFj6UwAsGukBTAOxC0l/dnSmZhJ7Z1KmEWilro/gOrjtOxqRQutlIqG22TaqoPG fYVN+en3Zwbt97kcgZDwqbuykNt64oZWc4XKCa3mprEGC3IbJTBFqglXmZ7l9ywG EEUJYOlb2XrSuPWml39beWdKM8kzr1OjnlOm6+lpTRCBfo0wa9F8YZRhHPAkwKkX XDeOGpWRj4ohOx0d2GWkyV5xyN14p2tQOCdOODmz80yUTgRpPVQUtOEhXQARAQAB tCFBV1MgQ0xJIFRlYW0gPGF3cy1jbGlAYW1hem9uLmNvbT6JAlQEEwEIAD4CGwMF CwkIBwIGFQoJCAsCBBYCAwECHgECF4AWIQT7Xbd/1cEYuAURraimMQrMRnJHXAUC ZqFYbwUJCv/cOgAKCRCmMQrMRnJHXKYuEAC+wtZ611qQtOl0t5spM9SWZuszbcyA 0xBAJq2pncnp6wdCOkuAPu4/R3UCIoD2C49MkLj9Y0Yvue8CCF6OIJ8L+fKBv2DI yWZGmHL0p9wa/X8NCKQrKxK1gq5PuCzi3f3SqwfbZuZGeK/ubnmtttWXpUtuU/Iz VR0u/0sAy3j4uTGKh2cX7XnZbSqgJhUk9H324mIJiSwzvw1Ker6xtH/LwdBeJCck bVBdh3LZis4zuD4IZeBO1vRvjot3Oq4xadUv5RSPATg7T1kivrtLCnwvqc6L4LnF 0OkNysk94L3LQSHyQW2kQS1cVwr+yGUSiSp+VvMbAobAapmMJWP6e/dKyAUGIX6+ 2waLdbBs2U7MXznx/2ayCLPH7qCY9cenbdj5JhG9ibVvFWqqhSo22B/URQE/CMrG +3xXwtHEBoMyWEATr1tWwn2yyQGbkUGANneSDFiTFeoQvKNyyCFTFO1F2XKCcuDs 19nj34PE2TJilTG2QRlMr4D0NgwLLAMg2Los1CK6nXWnImYHKuaKS9LVaCoC8vu7 IRBik1NX6SjrQnftk0M9dY+s0ZbAN1gbdjZ8H3qlbl/4TxMdr87m8LP4FZIIo261 Eycv34pVkCePZiP+dgamEiQJ7IL4ZArio9mv6HbDGV6mLY45+l6/0EzCwkI5IyIf BfWC9s/USgxchg== =ptgS -----END PGP PUBLIC KEY BLOCK-----

      For reference, the following are the details of the public key.

      Key ID: A6310ACC4672 Type: RSA Size: 4096/4096 Created: 2019-09-18 Expires: 2025-07-24 User ID: AWS CLI Team <aws-cli@amazon.com> Key fingerprint: FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C
    3. Import the Amazon CLI public key with the following command, substituting public-key-file-name with the file name of the public key you created.

      $ gpg --import public-key-file-name gpg: /home/username/.gnupg/trustdb.gpg: trustdb created gpg: key A6310ACC4672475C: public key "AWS CLI Team <aws-cli@amazon.com>" imported gpg: Total number processed: 1 gpg: imported: 1
    4. Download the Amazon CLI signature file for the package you downloaded. It has the same path and name as the .zip file it corresponds to, but has the extension .sig. In the following examples, we save it to the current directory as a file named awscliv2.sig.

      Linux x86 (64-bit)

      For the latest version of the Amazon CLI, use the following command block:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-x86_64.zip.sig

      For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip.sig resulting in the following command:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip.sig

      For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

      Linux ARM

      For the latest version of the Amazon CLI, use the following command block:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-aarch64.zip.sig

      For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip.sig resulting in the following command:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip.sig

      For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

    5. Verify the signature, passing both the downloaded .sig and .zip file names as parameters to the gpg command.

      $ gpg --verify awscliv2.sig awscliv2.zip

      The output should look similar to the following.

      gpg: Signature made Mon Nov 4 19:00:01 2019 PST gpg: using RSA key FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C gpg: Good signature from "AWS CLI Team <aws-cli@amazon.com>" [unknown] gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C
      Important

      The warning in the output is expected and doesn't indicate a problem. It occurs because there isn't a chain of trust between your personal PGP key (if you have one) and the Amazon CLI PGP key. For more information, see Web of trust.

  3. Unzip the installer. If your Linux distribution doesn't have a built-in unzip command, use an equivalent to unzip it. The following example command unzips the package and creates a directory named aws under the current directory.

    $ unzip awscliv2.zip
  4. Run the install program. The installation command uses a file named install in the newly unzipped aws directory. By default, the files are all installed to /usr/local/aws-cli, and a symbolic link is created in /usr/local/bin. The command includes sudo to grant write permissions to those directories.

    $ sudo ./aws/install

    You can install without sudo if you specify directories that you already have write permissions to. Use the following instructions for the install command to specify the installation location:

    • Ensure that the paths you provide to the -i and -b parameters contain no volume name or directory names that contain any space characters or other white space characters. If there is a space, the installation fails.

    • --install-dir or -i – This option specifies the directory to copy all of the files to.

      The default value is /usr/local/aws-cli.

    • --bin-dir or -b – This option specifies that the main aws program in the install directory is symbolically linked to the file aws in the specified path. You must have write permissions to the specified directory. Creating a symlink to a directory that is already in your path eliminates the need to add the install directory to the user's $PATH variable.

      The default value is /usr/local/bin.

    $ ./aws/install -i /usr/local/aws-cli -b /usr/local/bin
    Note

    To update your current installation of the Amazon CLI version 2 to a newer version, add your existing symlink and installer information to construct the install command with the --update parameter.

    $ sudo ./aws/install --bin-dir /usr/local/bin --install-dir /usr/local/aws-cli --update

    To locate the existing symlink and installation directory, use the following steps:

    1. Use the which command to find your symlink. This gives you the path to use with the --bin-dir parameter.

      $ which aws /usr/local/bin/aws
    2. Use the ls command to find the directory that your symlink points to. This gives you the path to use with the --install-dir parameter.

      $ ls -l /usr/local/bin/aws lrwxrwxrwx 1 ec2-user ec2-user 49 Oct 22 09:49 /usr/local/bin/aws -> /usr/local/aws-cli/v2/current/bin/aws
  5. Confirm the installation with the following command.

    $ aws --version aws-cli/2.19.1 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/2.4.5

    If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the Amazon CLI.

(Optional) Verifying the integrity of your downloaded zip file

If you chose to manually download the Amazon CLI version 2 installer package .zip in the above steps, you use can use the following steps to verify the signatures by using the GnuPG tool.

The Amazon CLI version 2 installer package .zip files are cryptographically signed using PGP signatures. If there is any damage or alteration of the files, this verification fails and you should not proceed with installation.

  1. Download and install the gpg command using your package manager. For more information about GnuPG, see the GnuPG website.

  2. To create the public key file, create a text file and paste in the following text.

    -----BEGIN PGP PUBLIC KEY BLOCK----- mQINBF2Cr7UBEADJZHcgusOJl7ENSyumXh85z0TRV0xJorM2B/JL0kHOyigQluUG ZMLhENaG0bYatdrKP+3H91lvK050pXwnO/R7fB/FSTouki4ciIx5OuLlnJZIxSzx PqGl0mkxImLNbGWoi6Lto0LYxqHN2iQtzlwTVmq9733zd3XfcXrZ3+LblHAgEt5G TfNxEKJ8soPLyWmwDH6HWCnjZ/aIQRBTIQ05uVeEoYxSh6wOai7ss/KveoSNBbYz gbdzoqI2Y8cgH2nbfgp3DSasaLZEdCSsIsK1u05CinE7k2qZ7KgKAUIcT/cR/grk C6VwsnDU0OUCideXcQ8WeHutqvgZH1JgKDbznoIzeQHJD238GEu+eKhRHcz8/jeG 94zkcgJOz3KbZGYMiTh277Fvj9zzvZsbMBCedV1BTg3TqgvdX4bdkhf5cH+7NtWO lrFj6UwAsGukBTAOxC0l/dnSmZhJ7Z1KmEWilro/gOrjtOxqRQutlIqG22TaqoPG fYVN+en3Zwbt97kcgZDwqbuykNt64oZWc4XKCa3mprEGC3IbJTBFqglXmZ7l9ywG EEUJYOlb2XrSuPWml39beWdKM8kzr1OjnlOm6+lpTRCBfo0wa9F8YZRhHPAkwKkX XDeOGpWRj4ohOx0d2GWkyV5xyN14p2tQOCdOODmz80yUTgRpPVQUtOEhXQARAQAB tCFBV1MgQ0xJIFRlYW0gPGF3cy1jbGlAYW1hem9uLmNvbT6JAlQEEwEIAD4CGwMF CwkIBwIGFQoJCAsCBBYCAwECHgECF4AWIQT7Xbd/1cEYuAURraimMQrMRnJHXAUC ZqFYbwUJCv/cOgAKCRCmMQrMRnJHXKYuEAC+wtZ611qQtOl0t5spM9SWZuszbcyA 0xBAJq2pncnp6wdCOkuAPu4/R3UCIoD2C49MkLj9Y0Yvue8CCF6OIJ8L+fKBv2DI yWZGmHL0p9wa/X8NCKQrKxK1gq5PuCzi3f3SqwfbZuZGeK/ubnmtttWXpUtuU/Iz VR0u/0sAy3j4uTGKh2cX7XnZbSqgJhUk9H324mIJiSwzvw1Ker6xtH/LwdBeJCck bVBdh3LZis4zuD4IZeBO1vRvjot3Oq4xadUv5RSPATg7T1kivrtLCnwvqc6L4LnF 0OkNysk94L3LQSHyQW2kQS1cVwr+yGUSiSp+VvMbAobAapmMJWP6e/dKyAUGIX6+ 2waLdbBs2U7MXznx/2ayCLPH7qCY9cenbdj5JhG9ibVvFWqqhSo22B/URQE/CMrG +3xXwtHEBoMyWEATr1tWwn2yyQGbkUGANneSDFiTFeoQvKNyyCFTFO1F2XKCcuDs 19nj34PE2TJilTG2QRlMr4D0NgwLLAMg2Los1CK6nXWnImYHKuaKS9LVaCoC8vu7 IRBik1NX6SjrQnftk0M9dY+s0ZbAN1gbdjZ8H3qlbl/4TxMdr87m8LP4FZIIo261 Eycv34pVkCePZiP+dgamEiQJ7IL4ZArio9mv6HbDGV6mLY45+l6/0EzCwkI5IyIf BfWC9s/USgxchg== =ptgS -----END PGP PUBLIC KEY BLOCK-----

    For reference, the following are the details of the public key.

    Key ID: A6310ACC4672 Type: RSA Size: 4096/4096 Created: 2019-09-18 Expires: 2025-07-24 User ID: AWS CLI Team <aws-cli@amazon.com> Key fingerprint: FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C
  3. Import the Amazon CLI public key with the following command, substituting public-key-file-name with the file name of the public key you created.

    $ gpg --import public-key-file-name gpg: /home/username/.gnupg/trustdb.gpg: trustdb created gpg: key A6310ACC4672475C: public key "AWS CLI Team <aws-cli@amazon.com>" imported gpg: Total number processed: 1 gpg: imported: 1
  4. Download the Amazon CLI signature file for the package you downloaded. It has the same path and name as the .zip file it corresponds to, but has the extension .sig. In the following examples, we save it to the current directory as a file named awscliv2.sig.

    Linux x86 (64-bit)

    For the latest version of the Amazon CLI, use the following command block:

    $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-x86_64.zip.sig

    For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip.sig resulting in the following command:

    $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip.sig

    For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

    Linux ARM

    For the latest version of the Amazon CLI, use the following command block:

    $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-aarch64.zip.sig

    For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip.sig resulting in the following command:

    $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip.sig

    For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  5. Verify the signature, passing both the downloaded .sig and .zip file names as parameters to the gpg command.

    $ gpg --verify awscliv2.sig awscliv2.zip

    The output should look similar to the following.

    gpg: Signature made Mon Nov 4 19:00:01 2019 PST gpg: using RSA key FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C gpg: Good signature from "AWS CLI Team <aws-cli@amazon.com>" [unknown] gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C
    Important

    The warning in the output is expected and doesn't indicate a problem. It occurs because there isn't a chain of trust between your personal PGP key (if you have one) and the Amazon CLI PGP key. For more information, see Web of trust.

Installation requirements

  • You know which release of the Amazon CLI version 2 you'd like to install. For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  • We support the Amazon CLI version 2 on Apple-supported versions of 64-bit macOS.

  • Because Amazon doesn't maintain third-party repositories, we can’t guarantee that they contain the latest version of the Amazon CLI.

Installation instructions

You can install the Amazon CLI version 2 on macOS in the following ways.

GUI installer

The following steps show how to install or update to the latest version of the Amazon CLI version 2 by using the standard macOS user interface and your browser. If you are updating to the latest version, use the same installation method that you used for your current version.

  1. In your browser, download your specific version of the Amazon CLI by appending a hyphen and the version number to the filename.

    https://awscli.amazonaws.com/AWSCLIV2-version.number.pkg

    For this example, the filename for version 2.0.30 would be AWSCLIV2-2.0.30.pkg resulting in the following link: https://awscli.amazonaws.com/AWSCLIV2-2.0.30.pkg.

  2. Run your downloaded file and follow the on-screen instructions. You can choose to install the Amazon CLI version 2 in the following ways:

    • For all users on the computer (requires sudo)

      • You can install to any folder, or choose the recommended default folder of /usr/local/aws-cli.

      • The installer automatically creates a symlink at /usr/local/bin/aws that links to the main program in the installation folder you chose.

    • For only the current user (doesn't require sudo)

      • You can install to any folder to which you have write permission.

      • Due to standard user permissions, after the installer finishes, you must manually create a symlink file in your $PATH that points to the aws and aws_completer programs by using the following commands at the command prompt. If your $PATH includes a folder you can write to, you can run the following command without sudo if you specify that folder as the target's path. If you don't have a writable folder in your $PATH, you must use sudo in the commands to get permissions to write to the specified target folder. The default location for a symlink is /usr/local/bin/.

        $ sudo ln -s /folder/installed/aws-cli/aws /usr/local/bin/aws $ sudo ln -s /folder/installed/aws-cli/aws_completer /usr/local/bin/aws_completer
    Note

    You can view debug logs for the installation by pressing Cmd+L anywhere in the installer. This opens a log pane that enables you to filter and save the log. The log file is also automatically saved to /var/log/install.log.

  3. To verify that the shell can find and run the aws command in your $PATH, use the following commands.

    $ which aws /usr/local/bin/aws $ aws --version aws-cli/2.19.1 Python/3.11.6 Darwin/23.3.0 botocore/2.4.5

    If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the Amazon CLI.

Command line installer - All users

If you have sudo permissions, you can install the Amazon CLI version 2 for all users on the computer. We provide the steps in one easy to copy and paste group. See the descriptions of each line in the following steps.

For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be AWSCLIV2-2.0.30.pkg resulting in the following command:

$ curl "https://awscli.amazonaws.com/AWSCLIV2-2.0.30.pkg" -o "AWSCLIV2.pkg" $ sudo installer -pkg AWSCLIV2.pkg -target /
  1. Download the file using the curl command. The -o option specifies the file name that the downloaded package is written to. In this example, the file is written to AWSCLIV2.pkg in the current folder.

    For a specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be AWSCLIV2-2.0.30.pkg resulting in the following command:

    $ curl "https://awscli.amazonaws.com/AWSCLIV2-2.0.30.pkg" -o "AWSCLIV2.pkg"

    For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  2. Run the standard macOS installer program, specifying the downloaded .pkg file as the source. Use the -pkg parameter to specify the name of the package to install, and the -target / parameter for which drive to install the package to. The files are installed to /usr/local/aws-cli, and a symlink is automatically created in /usr/local/bin. You must include sudo on the command to grant write permissions to those folders.

    $ sudo installer -pkg ./AWSCLIV2.pkg -target /

    After installation is complete, debug logs are written to /var/log/install.log.

  3. To verify that the shell can find and run the aws command in your $PATH, use the following commands.

    $ which aws /usr/local/bin/aws $ aws --version aws-cli/2.19.1 Python/3.11.6 Darwin/23.3.0 botocore/2.4.5

    If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the Amazon CLI.

Command line - Current user
  1. To specify which folder the Amazon CLI is installed to, you must create an XML file. This file is an XML-formatted file that looks like the following example. Leave all values as shown, except you must replace the path /Users/myusername in line 9 with the path to the folder you want the Amazon CLI version 2 installed to. The folder must already exist, or the command fails. This XML example specifies that the installer installs the Amazon CLI in the folder /Users/myusername, where it creates a folder named aws-cli.

    <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <array> <dict> <key>choiceAttribute</key> <string>customLocation</string> <key>attributeSetting</key> <string>/Users/myusername</string> <key>choiceIdentifier</key> <string>default</string> </dict> </array> </plist>
  2. Download the pkg installer using the curl command. The -o option specifies the file name that the downloaded package is written to. In this example, the file is written to AWSCLIV2.pkg in the current folder.

    For the specific version of the Amazon CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be AWSCLIV2-2.0.30.pkg resulting in the following command:

    $ curl "https://awscli.amazonaws.com/AWSCLIV2-2.0.30.pkg" -o "AWSCLIV2.pkg"

    For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  3. Run the standard macOS installer program with the following options:

    • Specify the name of the package to install by using the -pkg parameter.

    • Specify installing to a current user only by setting the -target parameter to CurrentUserHomeDirectory.

    • Specify the path (relative to the current folder) and name of the XML file that you created in the -applyChoiceChangesXML parameter.

    The following example installs the Amazon CLI in the folder /Users/myusername/aws-cli.

    $ installer -pkg AWSCLIV2.pkg \ -target CurrentUserHomeDirectory \ -applyChoiceChangesXML choices.xml
  4. Because standard user permissions typically don't allow writing to folders in your $PATH, the installer in this mode doesn't try to add the symlinks to the aws and aws_completer programs. For the Amazon CLI to run correctly, you must manually create the symlinks after the installer finishes. If your $PATH includes a folder you can write to and you specify the folder as the target's path, you can run the following command without sudo. If you don't have a writable folder in your $PATH, you must use sudo for permissions to write to the specified target folder. The default location for a symlink is /usr/local/bin/.

    $ sudo ln -s /folder/installed/aws-cli/aws /usr/local/bin/aws $ sudo ln -s /folder/installed/aws-cli/aws_completer /usr/local/bin/aws_completer

    After installation is complete, debug logs are written to /var/log/install.log.

  5. To verify that the shell can find and run the aws command in your $PATH, use the following commands.

    $ which aws /usr/local/bin/aws $ aws --version aws-cli/2.19.1 Python/3.11.6 Darwin/23.3.0 botocore/2.4.5

    If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the Amazon CLI.

Installation requirements

  • You know which release of the Amazon CLI version 2 you'd like to install. For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  • We support the Amazon CLI on Microsoft-supported versions of 64-bit Windows.

  • Admin rights to install software

Installation instructions

To update your current installation of Amazon CLI version 2 on Windows, download a new installer each time you update to overwrite previous versions. Amazon CLI is updated regularly. To see when the latest version was released, see the Amazon CLI version 2 Changelog on GitHub.

  1. Download and run the Amazon CLI MSI installer for Windows (64-bit) in one of the following ways:

    • Downloading and running the MSI installer: To create your download link for a specific version of the Amazon CLI, append a hyphen and the version number to the filename.

      https://awscli.amazonaws.com/AWSCLIV2-version.number.msi

      For this example the filename for version 2.0.30 would be AWSCLIV2-2.0.30.msi resulting in the following link: https://awscli.amazonaws.com/AWSCLIV2-2.0.30.msi.

    • Using the msiexec command: Alternatively, you can use the MSI installer by adding the link to the msiexec command. For a specific version of the Amazon CLI, append a hyphen and the version number to the filename.

      C:\> msiexec.exe /i https://awscli.amazonaws.com/AWSCLIV2-version.number.msi

      For this example the filename for version 2.0.30 would be AWSCLIV2-2.0.30.msi resulting in the following link https://awscli.amazonaws.com/AWSCLIV2-2.0.30.msi.

      C:\> msiexec.exe /i https://awscli.amazonaws.com/AWSCLIV2-2.0.30.msi

      For various parameters that can be used with msiexec, see msiexec on the Microsoft Docs website.

    For a list of versions, see the Amazon CLI version 2 Changelog on GitHub.

  2. To confirm the installation, open the Start menu, search for cmd to open a command prompt window, and at the command prompt use the aws --version command.

    C:\> aws --version aws-cli/2.19.1 Python/3.11.6 Windows/10 exe/AMD64 prompt/off

    If Windows is unable to find the program, you might need to close and reopen the command prompt window to refresh the path, or follow the troubleshooting in Troubleshooting errors for the Amazon CLI.

Troubleshooting Amazon CLI install and uninstall errors

If you come across issues after installing or uninstalling the Amazon CLI, see Troubleshooting errors for the Amazon CLI for troubleshooting steps. For the most relevant troubleshooting steps, see Command not found errors, The "aws --version" command returns a different version than you installed, and The "aws --version" command returns a version after uninstalling the Amazon CLI.

Next steps

After completing the steps in Prerequisites to use the Amazon CLI version 2 and installing the Amazon CLI, you should perform a Setting up the Amazon CLI.