GetEventSourceMapping
Returns details about an event source mapping. You can get the identifier of a mapping from the output of ListEventSourceMappings.
Request Syntax
GET /2015-03-31/event-source-mappings/UUID
HTTP/1.1
URI Request Parameters
The request uses the following URI parameters.
- UUID
-
The identifier of the event source mapping.
Required: Yes
Request Body
The request does not have a request body.
Response Syntax
HTTP/1.1 200
Content-type: application/json
{
"AmazonManagedKafkaEventSourceConfig": {
"ConsumerGroupId": "string"
},
"BatchSize": number,
"BisectBatchOnFunctionError": boolean,
"DestinationConfig": {
"OnFailure": {
"Destination": "string"
},
"OnSuccess": {
"Destination": "string"
}
},
"DocumentDBEventSourceConfig": {
"CollectionName": "string",
"DatabaseName": "string",
"FullDocument": "string"
},
"EventSourceArn": "string",
"EventSourceMappingArn": "string",
"FilterCriteria": {
"Filters": [
{
"Pattern": "string"
}
]
},
"FilterCriteriaError": {
"ErrorCode": "string",
"Message": "string"
},
"FunctionArn": "string",
"FunctionResponseTypes": [ "string" ],
"KMSKeyArn": "string",
"LastModified": number,
"LastProcessingResult": "string",
"MaximumBatchingWindowInSeconds": number,
"MaximumRecordAgeInSeconds": number,
"MaximumRetryAttempts": number,
"MetricsConfig": {
"Metrics": [ "string" ]
},
"ParallelizationFactor": number,
"ProvisionedPollerConfig": {
"MaximumPollers": number,
"MinimumPollers": number
},
"Queues": [ "string" ],
"ScalingConfig": {
"MaximumConcurrency": number
},
"SelfManagedEventSource": {
"Endpoints": {
"string" : [ "string" ]
}
},
"SelfManagedKafkaEventSourceConfig": {
"ConsumerGroupId": "string"
},
"SourceAccessConfigurations": [
{
"Type": "string",
"URI": "string"
}
],
"StartingPosition": "string",
"StartingPositionTimestamp": number,
"State": "string",
"StateTransitionReason": "string",
"Topics": [ "string" ],
"TumblingWindowInSeconds": number,
"UUID": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
- AmazonManagedKafkaEventSourceConfig
-
Specific configuration settings for an Amazon Managed Streaming for Apache Kafka (Amazon MSK) event source.
Type: AmazonManagedKafkaEventSourceConfig object
- BatchSize
-
The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).
Default value: Varies by service. For Amazon SQS, the default is 10. For all other services, the default is 100.
Related setting: When you set
BatchSize
to a value greater than 10, you must setMaximumBatchingWindowInSeconds
to at least 1.Type: Integer
Valid Range: Minimum value of 1. Maximum value of 10000.
- BisectBatchOnFunctionError
-
(Kinesis and DynamoDB Streams only) If the function returns an error, split the batch in two and retry. The default value is false.
Type: Boolean
- DestinationConfig
-
(Kinesis, DynamoDB Streams, Amazon MSK, and self-managed Apache Kafka event sources only) A configuration object that specifies the destination of an event after Lambda processes it.
Type: DestinationConfig object
- DocumentDBEventSourceConfig
-
Specific configuration settings for a DocumentDB event source.
Type: DocumentDBEventSourceConfig object
- EventSourceArn
-
The Amazon Resource Name (ARN) of the event source.
Type: String
Pattern:
arn:(aws[a-zA-Z0-9-]*):([a-zA-Z0-9\-])+:([a-z]{2}(-gov)?-[a-z]+-\d{1})?:(\d{12})?:(.*)
- EventSourceMappingArn
-
The Amazon Resource Name (ARN) of the event source mapping.
Type: String
Length Constraints: Minimum length of 85. Maximum length of 120.
Pattern:
arn:(aws[a-zA-Z-]*)?:lambda:[a-z]{2}((-gov)|(-iso([a-z]?)))?-[a-z]+-\d{1}:\d{12}:event-source-mapping:[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}
- FilterCriteria
-
An object that defines the filter criteria that determine whether Lambda should process an event. For more information, see Lambda event filtering.
If filter criteria is encrypted, this field shows up as
null
in the response of ListEventSourceMapping API calls. You can view this field in plaintext in the response of GetEventSourceMapping and DeleteEventSourceMapping calls if you havekms:Decrypt
permissions for the correct Amazon KMS key.Type: FilterCriteria object
- FilterCriteriaError
-
An object that contains details about an error related to filter criteria encryption.
Type: FilterCriteriaError object
- FunctionArn
-
The ARN of the Lambda function.
Type: String
Pattern:
arn:(aws[a-zA-Z-]*)?:lambda:[a-z]{2}(-gov)?-[a-z]+-\d{1}:\d{12}:function:[a-zA-Z0-9-_]+(:(\$LATEST|[a-zA-Z0-9-_]+))?
- FunctionResponseTypes
-
(Kinesis, DynamoDB Streams, and Amazon SQS) A list of current response type enums applied to the event source mapping.
Type: Array of strings
Array Members: Minimum number of 0 items. Maximum number of 1 item.
Valid Values:
ReportBatchItemFailures
- KMSKeyArn
-
The ARN of the Amazon Key Management Service (Amazon KMS) customer managed key that Lambda uses to encrypt your function's filter criteria.
Type: String
Pattern:
(arn:(aws[a-zA-Z-]*)?:[a-z0-9-.]+:.*)|()
- LastModified
-
The date that the event source mapping was last updated or that its state changed, in Unix time seconds.
Type: Timestamp
- LastProcessingResult
-
The result of the last Lambda invocation of your function.
Type: String
- MaximumBatchingWindowInSeconds
-
The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function. You can configure
MaximumBatchingWindowInSeconds
to any value from 0 seconds to 300 seconds in increments of seconds.For streams and Amazon SQS event sources, the default batching window is 0 seconds. For Amazon MSK, Self-managed Apache Kafka, Amazon MQ, and DocumentDB event sources, the default batching window is 500 ms. Note that because you can only change
MaximumBatchingWindowInSeconds
in increments of seconds, you cannot revert back to the 500 ms default batching window after you have changed it. To restore the default batching window, you must create a new event source mapping.Related setting: For streams and Amazon SQS event sources, when you set
BatchSize
to a value greater than 10, you must setMaximumBatchingWindowInSeconds
to at least 1.Type: Integer
Valid Range: Minimum value of 0. Maximum value of 300.
- MaximumRecordAgeInSeconds
-
(Kinesis and DynamoDB Streams only) Discard records older than the specified age. The default value is -1, which sets the maximum age to infinite. When the value is set to infinite, Lambda never discards old records.
Note
The minimum valid value for maximum record age is 60s. Although values less than 60 and greater than -1 fall within the parameter's absolute range, they are not allowed
Type: Integer
Valid Range: Minimum value of -1. Maximum value of 604800.
- MaximumRetryAttempts
-
(Kinesis and DynamoDB Streams only) Discard records after the specified number of retries. The default value is -1, which sets the maximum number of retries to infinite. When MaximumRetryAttempts is infinite, Lambda retries failed records until the record expires in the event source.
Type: Integer
Valid Range: Minimum value of -1. Maximum value of 10000.
- MetricsConfig
-
The metrics configuration for your event source. For more information, see Event source mapping metrics.
Type: EventSourceMappingMetricsConfig object
- ParallelizationFactor
-
(Kinesis and DynamoDB Streams only) The number of batches to process concurrently from each shard. The default value is 1.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 10.
- ProvisionedPollerConfig
-
(Amazon MSK and self-managed Apache Kafka only) The provisioned mode configuration for the event source. For more information, see provisioned mode.
Type: ProvisionedPollerConfig object
- Queues
-
(Amazon MQ) The name of the Amazon MQ broker destination queue to consume.
Type: Array of strings
Array Members: Fixed number of 1 item.
Length Constraints: Minimum length of 1. Maximum length of 1000.
Pattern:
[\s\S]*
- ScalingConfig
-
(Amazon SQS only) The scaling configuration for the event source. For more information, see Configuring maximum concurrency for Amazon SQS event sources.
Type: ScalingConfig object
- SelfManagedEventSource
-
The self-managed Apache Kafka cluster for your event source.
Type: SelfManagedEventSource object
- SelfManagedKafkaEventSourceConfig
-
Specific configuration settings for a self-managed Apache Kafka event source.
Type: SelfManagedKafkaEventSourceConfig object
- SourceAccessConfigurations
-
An array of the authentication protocol, VPC components, or virtual host to secure and define your event source.
Type: Array of SourceAccessConfiguration objects
Array Members: Minimum number of 0 items. Maximum number of 22 items.
- StartingPosition
-
The position in a stream from which to start reading. Required for Amazon Kinesis and Amazon DynamoDB Stream event sources.
AT_TIMESTAMP
is supported only for Amazon Kinesis streams, Amazon DocumentDB, Amazon MSK, and self-managed Apache Kafka.Type: String
Valid Values:
TRIM_HORIZON | LATEST | AT_TIMESTAMP
- StartingPositionTimestamp
-
With
StartingPosition
set toAT_TIMESTAMP
, the time from which to start reading, in Unix time seconds.StartingPositionTimestamp
cannot be in the future.Type: Timestamp
- State
-
The state of the event source mapping. It can be one of the following:
Creating
,Enabling
,Enabled
,Disabling
,Disabled
,Updating
, orDeleting
.Type: String
- StateTransitionReason
-
Indicates whether a user or Lambda made the last change to the event source mapping.
Type: String
- Topics
-
The name of the Kafka topic.
Type: Array of strings
Array Members: Fixed number of 1 item.
Length Constraints: Minimum length of 1. Maximum length of 249.
Pattern:
^[^.]([a-zA-Z0-9\-_.]+)
- TumblingWindowInSeconds
-
(Kinesis and DynamoDB Streams only) The duration in seconds of a processing window for DynamoDB and Kinesis Streams event sources. A value of 0 seconds indicates no tumbling window.
Type: Integer
Valid Range: Minimum value of 0. Maximum value of 900.
- UUID
-
The identifier of the event source mapping.
Type: String
Errors
For information about the errors that are common to all actions, see Common Errors.
- InvalidParameterValueException
-
One of the parameters in the request is not valid.
HTTP Status Code: 400
- ResourceNotFoundException
-
The resource specified in the request does not exist.
HTTP Status Code: 404
- ServiceException
-
The Amazon Lambda service encountered an internal error.
HTTP Status Code: 500
- TooManyRequestsException
-
The request throughput limit was exceeded. For more information, see Lambda quotas.
HTTP Status Code: 429
See Also
For more information about using this API in one of the language-specific Amazon SDKs, see the following: