Launching your Amazon OpenSearch Service domains within a VPC
You can launch Amazon resources, such as Amazon OpenSearch Service domains, into a virtual private cloud (VPC). A VPC is a virtual network that's dedicated to your Amazon Web Services account. It's logically isolated from other virtual networks in the Amazon Cloud. Placing an OpenSearch Service domain within a VPC enables secure communication between OpenSearch Service and other services within the VPC without the need for an internet gateway, NAT device, or VPN connection. All traffic remains securely within the Amazon Cloud.
Note
If you place your OpenSearch Service domain within a VPC, your computer must be able to connect to the VPC. This connection often takes the form of a VPN, transit gateway, managed network, or proxy server. You can't directly access your domains from outside the VPC.
VPC versus public domains
The following are some of the ways VPC domains differ from public domains. Each difference is described later in more detail.
-
Because of their logical isolation, domains that reside within a VPC have an extra layer of security compared to domains that use public endpoints.
-
While public domains are accessible from any internet-connected device, VPC domains require some form of VPN or proxy.
-
Compared to public domains, VPC domains display less information in the console. Specifically, the Cluster health tab does not include shard information, and the Indices tab isn't present.
-
The domain endpoints take different forms (
https://search-domain-name
vs.https://vpc-domain-name
). -
You can't apply IP-based access policies to domains that reside within a VPC because security groups already enforce IP-based access policies.
Limitations
Operating an OpenSearch Service domain within a VPC has the following limitations:
-
If you launch a new domain within a VPC, you can't later switch it to use a public endpoint. The reverse is also true: If you create a domain with a public endpoint, you can't later place it within a VPC. Instead, you must create a new domain and migrate your data.
-
You can either launch your domain within a VPC or use a public endpoint, but you can't do both. You must choose one or the other when you create your domain.
-
You can't launch your domain within a VPC that uses dedicated tenancy. You must use a VPC with tenancy set to Default.
-
After you place a domain within a VPC, you can't move it to a different VPC, but you can change the subnets and security group settings.
-
To access the default installation of OpenSearch Dashboards for a domain that resides within a VPC, users must have access to the VPC. This process varies by network configuration, but likely involves connecting to a VPN or managed network or using a proxy server or transit gateway. To learn more, see About access policies on VPC domains, the Amazon VPC User Guide, and Controlling access to Dashboards .
Architecture
To support VPCs, OpenSearch Service places an endpoint into one, two, or three subnets of your VPC. If you enable multiple Availability Zones for your domain, each subnet must be in a different Availability Zone in the same region. If you only use one Availability Zone, OpenSearch Service places an endpoint into only one subnet.
The following illustration shows the VPC architecture for one Availability Zone:
The following illustration shows the VPC architecture for two Availability Zones:
OpenSearch Service also places an elastic network interface (ENI) in the VPC for each of your data nodes. OpenSearch Service assigns each ENI a private IP address from the IPv4 address range of your subnet. The service also assigns a public DNS hostname (which is the domain endpoint) for the IP addresses. You must use a public DNS service to resolve the endpoint (which is a DNS hostname) to the appropriate IP addresses for the data nodes:
-
If your VPC uses the Amazon-provided DNS server by setting the
enableDnsSupport
option totrue
(the default value), resolution for the OpenSearch Service endpoint will succeed. -
If your VPC uses a private DNS server and the server can reach the public authoritative DNS servers to resolve DNS hostnames, resolution for the OpenSearch Service endpoint will also succeed.
Because the IP addresses might change, you should resolve the domain endpoint periodically so that you can always access the correct data nodes. We recommend that you set the DNS resolution interval to one minute. If you’re using a client, you should also ensure that the DNS cache in the client is cleared.
Migrating from public access to VPC access
When you create a domain, you specify whether it should have a public endpoint or reside within a VPC. Once created, you cannot switch from one to the other. Instead, you must create a new domain and either manually reindex or migrate your data. Snapshots offer a convenient means of migrating data. For information about taking and restoring snapshots, see Creating index snapshots in Amazon OpenSearch Service.
About access policies on VPC domains
Placing your OpenSearch Service domain within a VPC provides an inherent, strong layer of security. When you create a domain with public access, the endpoint takes the following form:
https://search-
domain-name
-identifier.region
.es.amazonaws.com
As the "public" label suggests, this endpoint is accessible from any
internet-connected device, though you can (and should) control
access to it. If you access the endpoint in a web browser, you might receive
a Not Authorized
message, but the request reaches the domain.
When you create a domain with VPC access, the endpoint looks similar to a public endpoint:
https://vpc-
domain-name
-identifier.region
.es.amazonaws.com
If you try to access the endpoint in a web browser, however, you might find that the
request times out. To perform even basic GET
requests, your computer must
be able to connect to the VPC. This connection often takes the form of a VPN, transit
gateway, managed network, or proxy server. For details on the various forms it can take,
see Examples for VPC in the
Amazon VPC User Guide. For a development-focused
example, see Testing VPC domains.
In addition to this connectivity requirement, VPCs let you manage access to the domain through security groups. For many use cases, this combination of security features is sufficient, and you might feel comfortable applying an open access policy to the domain.
Operating with an open access policy does not mean that anyone on the internet can access the OpenSearch Service domain. Rather, it means that if a request reaches the OpenSearch Service domain and the associated security groups permit it, the domain accepts the request. The only exception is if you're using fine-grained access control or an access policy that specifies IAM roles. In these situations, for the domain to accept a request, the security groups must permit it and it must be signed with valid credentials.
Note
Because security groups already enforce IP-based access policies, you can't apply IP-based access policies to OpenSearch Service domains that reside within a VPC. If you use public access, IP-based policies are still available.
Before you begin: prerequisites for VPC access
Before you can enable a connection between a VPC and your new OpenSearch Service domain, you must do the following:
-
Create a VPC
To create your VPC, you can use the Amazon VPC console, the Amazon CLI, or one of the Amazon SDKs. For more information, see Working with VPCs in the Amazon VPC User Guide. If you already have a VPC, you can skip this step.
-
Reserve IP addresses
OpenSearch Service enables the connection of a VPC to a domain by placing network interfaces in a subnet of the VPC. Each network interface is associated with an IP address. You must reserve a sufficient number of IP addresses in the subnet for the network interfaces. For more information, see Reserving IP addresses in a VPC subnet.
Testing VPC domains
The enhanced security of a VPC can make connecting to your domain and running basic tests a challenge. If you already have an OpenSearch Service VPC domain and would rather not create a VPN server, try the following process:
-
For your domain's access policy, choose Only use fine-grained access control. You can always update this setting after you finish testing.
-
Create an Amazon Linux Amazon EC2 instance in the same VPC, subnet, and security group as your OpenSearch Service domain.
Because this instance is for testing purposes and needs to do very little work, choose an inexpensive instance type like
t2.micro
. Assign the instance a public IP address and either create a new key pair or choose an existing one. If you create a new key, download it to your~/.ssh
directory.To learn more about creating instances, see Getting started with Amazon EC2 Linux instances.
-
Add an internet gateway
to your VPC. -
In the route table
for your VPC, add a new route. For Destination, specify a CIDR block that contains your computer's public IP address. For Target, specify the internet gateway you just created. For example, you might specify
123.123.123.123/32
for just your computer or123.123.123.0/24
for a range of computers. -
For the security group, specify two inbound rules:
Type Protocol Port Range Source SSH (22) TCP (6) 22 your-cidr-block
HTTPS (443) TCP (6) 443 your-security-group-id
The first rule lets you SSH into your EC2 instance. The second allows the EC2 instance to communicate with the OpenSearch Service domain over HTTPS.
-
From the terminal, run the following command:
ssh -i ~/.ssh/
your-key
.pem ec2-user@your-ec2-instance-public-ip
-N -L 9200:vpc-domain-name
.region
.es.amazonaws.com:443This command creates an SSH tunnel that forwards requests to https://localhost:9200
to your OpenSearch Service domain through the EC2 instance. Specifying port 9200 in the command simulates a local OpenSearch install, but use whichever port you'd like. OpenSearch Service only accepts connections over port 80 (HTTP) or 443 (HTTPS). The command provides no feedback and runs indefinitely. To stop it, press
Ctrl + C
. -
Navigate to https://localhost:9200/_dashboards/
in your web browser. You might need to acknowledge a security exception. Alternately, you can send requests to https://localhost:9200
using curl , Postman , or your favorite programming language. Tip
If you encounter curl errors due to a certificate mismatch, try the
--insecure
flag.
Reserving IP addresses in a VPC subnet
OpenSearch Service connects a domain to a VPC by placing network interfaces in a subnet of the VPC (or multiple subnets of the VPC if you enable multiple Availability Zones). Each network interface is associated with an IP address. Before you create your OpenSearch Service domain, you must have a sufficient number of IP addresses available in each subnet to accommodate the network interfaces.
Here's the basic formula: The number of IP addresses that OpenSearch Service reserves in each subnet is three times the number of data nodes, divided by the number of Availability Zones.
Examples
-
If a domain has nine data nodes across three Availability Zones, the IP count per subnet is 9 * 3 / 3 = 9.
-
If a domain has eight data nodes across two Availability Zones, the IP count per subnet is 8 * 3 / 2 = 12.
-
If a domain has six data nodes in one Availability Zone, the IP count per subnet is 6 * 3 / 1 = 18.
When you create the domain, OpenSearch Service reserves the IP addresses, uses some for the domain, and reserves the rest for blue/green deployments. You can see the network interfaces and their associated IP addresses in the Network Interfaces section of the Amazon EC2 console. The Description column shows which OpenSearch Service domain the network interface is associated with.
Tip
We recommend that you create dedicated subnets for the OpenSearch Service reserved IP addresses. By using dedicated subnets, you avoid overlap with other applications and services and ensure that you can reserve additional IP addresses if you need to scale your cluster in the future. To learn more, see Creating a subnet in your VPC.
You may also consider provisioning dedicated coordinator nodes to reduce the number of private IP address reservations required for your VPC domain. OpenSearch attaches an elastic network interface (ENI) to your dedicated coordinator nodes instead of your data nodes. Dedicated coordinator nodes usually represent around 10% of total data nodes. As a result, a smaller number of private IP addresses will be reserved for VPC domains.
Service-linked role for VPC access
A service-linked role is a unique type of IAM role that delegates permissions to a service so that it can create and manage resources on your behalf. OpenSearch Service requires a service-linked role to access your VPC, create the domain endpoint, and place network interfaces in a subnet of your VPC.
OpenSearch Service automatically creates the role when you use the OpenSearch Service console to create a domain
within a VPC. For this automatic creation to succeed, you must have permissions for
the iam:CreateServiceLinkedRole
action. To learn more, see Service-linked role permissions in the IAM User Guide.
After OpenSearch Service creates the role, you can view it
(AWSServiceRoleForAmazonOpenSearchService
) using the IAM
console.
For full information on this role's permissions and how to delete it, see Using service-linked roles for Amazon OpenSearch Service.