All Superinterfaces:: AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface DataZoneClient extends AwsClient

Service client for accessing Amazon DataZone. This can be created using the static builder() method.

Amazon DataZone is a data management service that enables you to catalog, discover, govern, share, and analyze your data. With Amazon DataZone, you can share and access your data across accounts and supported regions. Amazon DataZone simplifies your experience across Amazon Web Services services, including, but not limited to, Amazon Redshift, Amazon Athena, Amazon Web Services Glue, and Amazon Web Services Lake Formation.

Field Summary

Fields

Modifier and Type

Field

Description

static final String

SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

static final String

SERVICE_NAME
Method Summary

Modifier and Type

Method

Description

default AcceptPredictionsResponse

acceptPredictions(Consumer<AcceptPredictionsRequest.Builder> acceptPredictionsRequest)

Accepts automatically generated business-friendly metadata for your Amazon DataZone assets.

default AcceptPredictionsResponse

acceptPredictions(AcceptPredictionsRequest acceptPredictionsRequest)

Accepts automatically generated business-friendly metadata for your Amazon DataZone assets.

default AcceptSubscriptionRequestResponse

acceptSubscriptionRequest(Consumer<AcceptSubscriptionRequestRequest.Builder> acceptSubscriptionRequestRequest)

Accepts a subscription request to a specific asset.

default AcceptSubscriptionRequestResponse

acceptSubscriptionRequest(AcceptSubscriptionRequestRequest acceptSubscriptionRequestRequest)

Accepts a subscription request to a specific asset.

static DataZoneClientBuilder

builder()

Create a builder that can be used to configure and create a DataZoneClient.

default CancelMetadataGenerationRunResponse

cancelMetadataGenerationRun(Consumer<CancelMetadataGenerationRunRequest.Builder> cancelMetadataGenerationRunRequest)

Cancels the metadata generation run.

default CancelMetadataGenerationRunResponse

cancelMetadataGenerationRun(CancelMetadataGenerationRunRequest cancelMetadataGenerationRunRequest)

Cancels the metadata generation run.

default CancelSubscriptionResponse

cancelSubscription(Consumer<CancelSubscriptionRequest.Builder> cancelSubscriptionRequest)

Cancels the subscription to the specified asset.

default CancelSubscriptionResponse

cancelSubscription(CancelSubscriptionRequest cancelSubscriptionRequest)

Cancels the subscription to the specified asset.

static DataZoneClient

create()

Create a DataZoneClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

default CreateAssetResponse

createAsset(Consumer<CreateAssetRequest.Builder> createAssetRequest)

Creates an asset in Amazon DataZone catalog.

default CreateAssetResponse

createAsset(CreateAssetRequest createAssetRequest)

Creates an asset in Amazon DataZone catalog.

default CreateAssetRevisionResponse

createAssetRevision(Consumer<CreateAssetRevisionRequest.Builder> createAssetRevisionRequest)

Creates a revision of the asset.

default CreateAssetRevisionResponse

createAssetRevision(CreateAssetRevisionRequest createAssetRevisionRequest)

Creates a revision of the asset.

default CreateAssetTypeResponse

createAssetType(Consumer<CreateAssetTypeRequest.Builder> createAssetTypeRequest)

Creates a custom asset type.

default CreateAssetTypeResponse

createAssetType(CreateAssetTypeRequest createAssetTypeRequest)

Creates a custom asset type.

default CreateDataSourceResponse

createDataSource(Consumer<CreateDataSourceRequest.Builder> createDataSourceRequest)

Creates an Amazon DataZone data source.

default CreateDataSourceResponse

createDataSource(CreateDataSourceRequest createDataSourceRequest)

Creates an Amazon DataZone data source.

default CreateDomainResponse

createDomain(Consumer<CreateDomainRequest.Builder> createDomainRequest)

Creates an Amazon DataZone domain.

default CreateDomainResponse

createDomain(CreateDomainRequest createDomainRequest)

Creates an Amazon DataZone domain.

default CreateEnvironmentResponse

createEnvironment(Consumer<CreateEnvironmentRequest.Builder> createEnvironmentRequest)

Create an Amazon DataZone environment.

default CreateEnvironmentResponse

createEnvironment(CreateEnvironmentRequest createEnvironmentRequest)

Create an Amazon DataZone environment.

default CreateEnvironmentProfileResponse

createEnvironmentProfile(Consumer<CreateEnvironmentProfileRequest.Builder> createEnvironmentProfileRequest)

Creates an Amazon DataZone environment profile.

default CreateEnvironmentProfileResponse

createEnvironmentProfile(CreateEnvironmentProfileRequest createEnvironmentProfileRequest)

Creates an Amazon DataZone environment profile.

default CreateFormTypeResponse

createFormType(Consumer<CreateFormTypeRequest.Builder> createFormTypeRequest)

Creates a metadata form type.

default CreateFormTypeResponse

createFormType(CreateFormTypeRequest createFormTypeRequest)

Creates a metadata form type.

default CreateGlossaryResponse

createGlossary(Consumer<CreateGlossaryRequest.Builder> createGlossaryRequest)

Creates an Amazon DataZone business glossary.

default CreateGlossaryResponse

createGlossary(CreateGlossaryRequest createGlossaryRequest)

Creates an Amazon DataZone business glossary.

default CreateGlossaryTermResponse

createGlossaryTerm(Consumer<CreateGlossaryTermRequest.Builder> createGlossaryTermRequest)

Creates a business glossary term.

default CreateGlossaryTermResponse

createGlossaryTerm(CreateGlossaryTermRequest createGlossaryTermRequest)

Creates a business glossary term.

default CreateGroupProfileResponse

createGroupProfile(Consumer<CreateGroupProfileRequest.Builder> createGroupProfileRequest)

Creates a group profile in Amazon DataZone.

default CreateGroupProfileResponse

createGroupProfile(CreateGroupProfileRequest createGroupProfileRequest)

Creates a group profile in Amazon DataZone.

default CreateListingChangeSetResponse

createListingChangeSet(Consumer<CreateListingChangeSetRequest.Builder> createListingChangeSetRequest)

Publishes a listing (a record of an asset at a given time) or removes a listing from the catalog.

default CreateListingChangeSetResponse

createListingChangeSet(CreateListingChangeSetRequest createListingChangeSetRequest)

Publishes a listing (a record of an asset at a given time) or removes a listing from the catalog.

default CreateProjectResponse

createProject(Consumer<CreateProjectRequest.Builder> createProjectRequest)

Creates an Amazon DataZone project.

default CreateProjectResponse

createProject(CreateProjectRequest createProjectRequest)

Creates an Amazon DataZone project.

default CreateProjectMembershipResponse

createProjectMembership(Consumer<CreateProjectMembershipRequest.Builder> createProjectMembershipRequest)

Creates a project membership in Amazon DataZone.

default CreateProjectMembershipResponse

createProjectMembership(CreateProjectMembershipRequest createProjectMembershipRequest)

Creates a project membership in Amazon DataZone.

default CreateSubscriptionGrantResponse

createSubscriptionGrant(Consumer<CreateSubscriptionGrantRequest.Builder> createSubscriptionGrantRequest)

Creates a subsscription grant in Amazon DataZone.

default CreateSubscriptionGrantResponse

createSubscriptionGrant(CreateSubscriptionGrantRequest createSubscriptionGrantRequest)

Creates a subsscription grant in Amazon DataZone.

default CreateSubscriptionRequestResponse

createSubscriptionRequest(Consumer<CreateSubscriptionRequestRequest.Builder> createSubscriptionRequestRequest)

Creates a subscription request in Amazon DataZone.

default CreateSubscriptionRequestResponse

createSubscriptionRequest(CreateSubscriptionRequestRequest createSubscriptionRequestRequest)

Creates a subscription request in Amazon DataZone.

default CreateSubscriptionTargetResponse

createSubscriptionTarget(Consumer<CreateSubscriptionTargetRequest.Builder> createSubscriptionTargetRequest)

Creates a subscription target in Amazon DataZone.

default CreateSubscriptionTargetResponse

createSubscriptionTarget(CreateSubscriptionTargetRequest createSubscriptionTargetRequest)

Creates a subscription target in Amazon DataZone.

default CreateUserProfileResponse

createUserProfile(Consumer<CreateUserProfileRequest.Builder> createUserProfileRequest)

Creates a user profile in Amazon DataZone.

default CreateUserProfileResponse

createUserProfile(CreateUserProfileRequest createUserProfileRequest)

Creates a user profile in Amazon DataZone.

default DeleteAssetResponse

deleteAsset(Consumer<DeleteAssetRequest.Builder> deleteAssetRequest)

Delets an asset in Amazon DataZone.

default DeleteAssetResponse

deleteAsset(DeleteAssetRequest deleteAssetRequest)

Delets an asset in Amazon DataZone.

default DeleteAssetTypeResponse

deleteAssetType(Consumer<DeleteAssetTypeRequest.Builder> deleteAssetTypeRequest)

Deletes an asset type in Amazon DataZone.

default DeleteAssetTypeResponse

deleteAssetType(DeleteAssetTypeRequest deleteAssetTypeRequest)

Deletes an asset type in Amazon DataZone.

default DeleteDataSourceResponse

deleteDataSource(Consumer<DeleteDataSourceRequest.Builder> deleteDataSourceRequest)

Deletes a data source in Amazon DataZone.

default DeleteDataSourceResponse

deleteDataSource(DeleteDataSourceRequest deleteDataSourceRequest)

Deletes a data source in Amazon DataZone.

default DeleteDomainResponse

deleteDomain(Consumer<DeleteDomainRequest.Builder> deleteDomainRequest)

Deletes a Amazon DataZone domain.

default DeleteDomainResponse

deleteDomain(DeleteDomainRequest deleteDomainRequest)

Deletes a Amazon DataZone domain.

default DeleteEnvironmentResponse

deleteEnvironment(Consumer<DeleteEnvironmentRequest.Builder> deleteEnvironmentRequest)

Deletes an environment in Amazon DataZone.

default DeleteEnvironmentResponse

deleteEnvironment(DeleteEnvironmentRequest deleteEnvironmentRequest)

Deletes an environment in Amazon DataZone.

default DeleteEnvironmentBlueprintConfigurationResponse

deleteEnvironmentBlueprintConfiguration(Consumer<DeleteEnvironmentBlueprintConfigurationRequest.Builder> deleteEnvironmentBlueprintConfigurationRequest)

Deletes the blueprint configuration in Amazon DataZone.

default DeleteEnvironmentBlueprintConfigurationResponse

deleteEnvironmentBlueprintConfiguration(DeleteEnvironmentBlueprintConfigurationRequest deleteEnvironmentBlueprintConfigurationRequest)

Deletes the blueprint configuration in Amazon DataZone.

default DeleteEnvironmentProfileResponse

deleteEnvironmentProfile(Consumer<DeleteEnvironmentProfileRequest.Builder> deleteEnvironmentProfileRequest)

Deletes an environment profile in Amazon DataZone.

default DeleteEnvironmentProfileResponse

deleteEnvironmentProfile(DeleteEnvironmentProfileRequest deleteEnvironmentProfileRequest)

Deletes an environment profile in Amazon DataZone.

default DeleteFormTypeResponse

deleteFormType(Consumer<DeleteFormTypeRequest.Builder> deleteFormTypeRequest)

Delets and metadata form type in Amazon DataZone.

default DeleteFormTypeResponse

deleteFormType(DeleteFormTypeRequest deleteFormTypeRequest)

Delets and metadata form type in Amazon DataZone.

default DeleteGlossaryResponse

deleteGlossary(Consumer<DeleteGlossaryRequest.Builder> deleteGlossaryRequest)

Deletes a business glossary in Amazon DataZone.

default DeleteGlossaryResponse

deleteGlossary(DeleteGlossaryRequest deleteGlossaryRequest)

Deletes a business glossary in Amazon DataZone.

default DeleteGlossaryTermResponse

deleteGlossaryTerm(Consumer<DeleteGlossaryTermRequest.Builder> deleteGlossaryTermRequest)

Deletes a business glossary term in Amazon DataZone.

default DeleteGlossaryTermResponse

deleteGlossaryTerm(DeleteGlossaryTermRequest deleteGlossaryTermRequest)

Deletes a business glossary term in Amazon DataZone.

default DeleteListingResponse

deleteListing(Consumer<DeleteListingRequest.Builder> deleteListingRequest)

Deletes a listing (a record of an asset at a given time).

default DeleteListingResponse

deleteListing(DeleteListingRequest deleteListingRequest)

Deletes a listing (a record of an asset at a given time).

default DeleteProjectResponse

deleteProject(Consumer<DeleteProjectRequest.Builder> deleteProjectRequest)

Deletes a project in Amazon DataZone.

default DeleteProjectResponse

deleteProject(DeleteProjectRequest deleteProjectRequest)

Deletes a project in Amazon DataZone.

default DeleteProjectMembershipResponse

deleteProjectMembership(Consumer<DeleteProjectMembershipRequest.Builder> deleteProjectMembershipRequest)

Deletes project membership in Amazon DataZone.

default DeleteProjectMembershipResponse

deleteProjectMembership(DeleteProjectMembershipRequest deleteProjectMembershipRequest)

Deletes project membership in Amazon DataZone.

default DeleteSubscriptionGrantResponse

deleteSubscriptionGrant(Consumer<DeleteSubscriptionGrantRequest.Builder> deleteSubscriptionGrantRequest)

Deletes and subscription grant in Amazon DataZone.

default DeleteSubscriptionGrantResponse

deleteSubscriptionGrant(DeleteSubscriptionGrantRequest deleteSubscriptionGrantRequest)

Deletes and subscription grant in Amazon DataZone.

default DeleteSubscriptionRequestResponse

deleteSubscriptionRequest(Consumer<DeleteSubscriptionRequestRequest.Builder> deleteSubscriptionRequestRequest)

Deletes a subscription request in Amazon DataZone.

default DeleteSubscriptionRequestResponse

deleteSubscriptionRequest(DeleteSubscriptionRequestRequest deleteSubscriptionRequestRequest)

Deletes a subscription request in Amazon DataZone.

default DeleteSubscriptionTargetResponse

deleteSubscriptionTarget(Consumer<DeleteSubscriptionTargetRequest.Builder> deleteSubscriptionTargetRequest)

Deletes a subscription target in Amazon DataZone.

default DeleteSubscriptionTargetResponse

deleteSubscriptionTarget(DeleteSubscriptionTargetRequest deleteSubscriptionTargetRequest)

Deletes a subscription target in Amazon DataZone.

default DeleteTimeSeriesDataPointsResponse

deleteTimeSeriesDataPoints(Consumer<DeleteTimeSeriesDataPointsRequest.Builder> deleteTimeSeriesDataPointsRequest)

Deletes the specified time series form for the specified asset.

default DeleteTimeSeriesDataPointsResponse

deleteTimeSeriesDataPoints(DeleteTimeSeriesDataPointsRequest deleteTimeSeriesDataPointsRequest)

Deletes the specified time series form for the specified asset.

default GetAssetResponse

getAsset(Consumer<GetAssetRequest.Builder> getAssetRequest)

Gets an Amazon DataZone asset.

default GetAssetResponse

getAsset(GetAssetRequest getAssetRequest)

Gets an Amazon DataZone asset.

default GetAssetTypeResponse

getAssetType(Consumer<GetAssetTypeRequest.Builder> getAssetTypeRequest)

Gets an Amazon DataZone asset type.

default GetAssetTypeResponse

getAssetType(GetAssetTypeRequest getAssetTypeRequest)

Gets an Amazon DataZone asset type.

default GetDataSourceResponse

getDataSource(Consumer<GetDataSourceRequest.Builder> getDataSourceRequest)

Gets an Amazon DataZone data source.

default GetDataSourceResponse

getDataSource(GetDataSourceRequest getDataSourceRequest)

Gets an Amazon DataZone data source.

default GetDataSourceRunResponse

getDataSourceRun(Consumer<GetDataSourceRunRequest.Builder> getDataSourceRunRequest)

Gets an Amazon DataZone data source run.

default GetDataSourceRunResponse

getDataSourceRun(GetDataSourceRunRequest getDataSourceRunRequest)

Gets an Amazon DataZone data source run.

default GetDomainResponse

getDomain(Consumer<GetDomainRequest.Builder> getDomainRequest)

Gets an Amazon DataZone domain.

default GetDomainResponse

getDomain(GetDomainRequest getDomainRequest)

Gets an Amazon DataZone domain.

default GetEnvironmentResponse

getEnvironment(Consumer<GetEnvironmentRequest.Builder> getEnvironmentRequest)

Gets an Amazon DataZone environment.

default GetEnvironmentResponse

getEnvironment(GetEnvironmentRequest getEnvironmentRequest)

Gets an Amazon DataZone environment.

default GetEnvironmentBlueprintResponse

getEnvironmentBlueprint(Consumer<GetEnvironmentBlueprintRequest.Builder> getEnvironmentBlueprintRequest)

Gets an Amazon DataZone blueprint.

default GetEnvironmentBlueprintResponse

getEnvironmentBlueprint(GetEnvironmentBlueprintRequest getEnvironmentBlueprintRequest)

Gets an Amazon DataZone blueprint.

default GetEnvironmentBlueprintConfigurationResponse

getEnvironmentBlueprintConfiguration(Consumer<GetEnvironmentBlueprintConfigurationRequest.Builder> getEnvironmentBlueprintConfigurationRequest)

Gets the blueprint configuration in Amazon DataZone.

default GetEnvironmentBlueprintConfigurationResponse

getEnvironmentBlueprintConfiguration(GetEnvironmentBlueprintConfigurationRequest getEnvironmentBlueprintConfigurationRequest)

Gets the blueprint configuration in Amazon DataZone.

default GetEnvironmentProfileResponse

getEnvironmentProfile(Consumer<GetEnvironmentProfileRequest.Builder> getEnvironmentProfileRequest)

Gets an evinronment profile in Amazon DataZone.

default GetEnvironmentProfileResponse

getEnvironmentProfile(GetEnvironmentProfileRequest getEnvironmentProfileRequest)

Gets an evinronment profile in Amazon DataZone.

default GetFormTypeResponse

getFormType(Consumer<GetFormTypeRequest.Builder> getFormTypeRequest)

Gets a metadata form type in Amazon DataZone.

default GetFormTypeResponse

getFormType(GetFormTypeRequest getFormTypeRequest)

Gets a metadata form type in Amazon DataZone.

default GetGlossaryResponse

getGlossary(Consumer<GetGlossaryRequest.Builder> getGlossaryRequest)

Gets a business glossary in Amazon DataZone.

default GetGlossaryResponse

getGlossary(GetGlossaryRequest getGlossaryRequest)

Gets a business glossary in Amazon DataZone.

default GetGlossaryTermResponse

getGlossaryTerm(Consumer<GetGlossaryTermRequest.Builder> getGlossaryTermRequest)

Gets a business glossary term in Amazon DataZone.

default GetGlossaryTermResponse

getGlossaryTerm(GetGlossaryTermRequest getGlossaryTermRequest)

Gets a business glossary term in Amazon DataZone.

default GetGroupProfileResponse

getGroupProfile(Consumer<GetGroupProfileRequest.Builder> getGroupProfileRequest)

Gets a group profile in Amazon DataZone.

default GetGroupProfileResponse

getGroupProfile(GetGroupProfileRequest getGroupProfileRequest)

Gets a group profile in Amazon DataZone.

default GetIamPortalLoginUrlResponse

getIamPortalLoginUrl(Consumer<GetIamPortalLoginUrlRequest.Builder> getIamPortalLoginUrlRequest)

Gets the data portal URL for the specified Amazon DataZone domain.

default GetIamPortalLoginUrlResponse

getIamPortalLoginUrl(GetIamPortalLoginUrlRequest getIamPortalLoginUrlRequest)

Gets the data portal URL for the specified Amazon DataZone domain.

default GetListingResponse

getListing(Consumer<GetListingRequest.Builder> getListingRequest)

Gets a listing (a record of an asset at a given time).

default GetListingResponse

getListing(GetListingRequest getListingRequest)

Gets a listing (a record of an asset at a given time).

default GetMetadataGenerationRunResponse

getMetadataGenerationRun(Consumer<GetMetadataGenerationRunRequest.Builder> getMetadataGenerationRunRequest)

Gets a metadata generation run in Amazon DataZone.

default GetMetadataGenerationRunResponse

getMetadataGenerationRun(GetMetadataGenerationRunRequest getMetadataGenerationRunRequest)

Gets a metadata generation run in Amazon DataZone.

default GetProjectResponse

getProject(Consumer<GetProjectRequest.Builder> getProjectRequest)

Gets a project in Amazon DataZone.

default GetProjectResponse

getProject(GetProjectRequest getProjectRequest)

Gets a project in Amazon DataZone.

default GetSubscriptionResponse

getSubscription(Consumer<GetSubscriptionRequest.Builder> getSubscriptionRequest)

Gets a subscription in Amazon DataZone.

default GetSubscriptionResponse

getSubscription(GetSubscriptionRequest getSubscriptionRequest)

Gets a subscription in Amazon DataZone.

default GetSubscriptionGrantResponse

getSubscriptionGrant(Consumer<GetSubscriptionGrantRequest.Builder> getSubscriptionGrantRequest)

Gets the subscription grant in Amazon DataZone.

default GetSubscriptionGrantResponse

getSubscriptionGrant(GetSubscriptionGrantRequest getSubscriptionGrantRequest)

Gets the subscription grant in Amazon DataZone.

default GetSubscriptionRequestDetailsResponse

getSubscriptionRequestDetails(Consumer<GetSubscriptionRequestDetailsRequest.Builder> getSubscriptionRequestDetailsRequest)

Gets the details of the specified subscription request.

default GetSubscriptionRequestDetailsResponse

getSubscriptionRequestDetails(GetSubscriptionRequestDetailsRequest getSubscriptionRequestDetailsRequest)

Gets the details of the specified subscription request.

default GetSubscriptionTargetResponse

getSubscriptionTarget(Consumer<GetSubscriptionTargetRequest.Builder> getSubscriptionTargetRequest)

Gets the subscription target in Amazon DataZone.

default GetSubscriptionTargetResponse

getSubscriptionTarget(GetSubscriptionTargetRequest getSubscriptionTargetRequest)

Gets the subscription target in Amazon DataZone.

default GetTimeSeriesDataPointResponse

getTimeSeriesDataPoint(Consumer<GetTimeSeriesDataPointRequest.Builder> getTimeSeriesDataPointRequest)

Gets the existing data point for the asset.

default GetTimeSeriesDataPointResponse

getTimeSeriesDataPoint(GetTimeSeriesDataPointRequest getTimeSeriesDataPointRequest)

Gets the existing data point for the asset.

default GetUserProfileResponse

getUserProfile(Consumer<GetUserProfileRequest.Builder> getUserProfileRequest)

Gets a user profile in Amazon DataZone.

default GetUserProfileResponse

getUserProfile(GetUserProfileRequest getUserProfileRequest)

Gets a user profile in Amazon DataZone.

default ListAssetRevisionsResponse

listAssetRevisions(Consumer<ListAssetRevisionsRequest.Builder> listAssetRevisionsRequest)

Lists the revisions for the asset.

default ListAssetRevisionsResponse

listAssetRevisions(ListAssetRevisionsRequest listAssetRevisionsRequest)

Lists the revisions for the asset.

default ListAssetRevisionsIterable

listAssetRevisionsPaginator(Consumer<ListAssetRevisionsRequest.Builder> listAssetRevisionsRequest)

This is a variant of listAssetRevisions(software.amazon.awssdk.services.datazone.model.ListAssetRevisionsRequest) operation.

default ListAssetRevisionsIterable

listAssetRevisionsPaginator(ListAssetRevisionsRequest listAssetRevisionsRequest)

This is a variant of listAssetRevisions(software.amazon.awssdk.services.datazone.model.ListAssetRevisionsRequest) operation.

default ListDataSourceRunActivitiesResponse

listDataSourceRunActivities(Consumer<ListDataSourceRunActivitiesRequest.Builder> listDataSourceRunActivitiesRequest)

Lists data source run activities.

default ListDataSourceRunActivitiesResponse

listDataSourceRunActivities(ListDataSourceRunActivitiesRequest listDataSourceRunActivitiesRequest)

Lists data source run activities.

default ListDataSourceRunActivitiesIterable

listDataSourceRunActivitiesPaginator(Consumer<ListDataSourceRunActivitiesRequest.Builder> listDataSourceRunActivitiesRequest)

This is a variant of listDataSourceRunActivities(software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesRequest) operation.

default ListDataSourceRunActivitiesIterable

listDataSourceRunActivitiesPaginator(ListDataSourceRunActivitiesRequest listDataSourceRunActivitiesRequest)

This is a variant of listDataSourceRunActivities(software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesRequest) operation.

default ListDataSourceRunsResponse

listDataSourceRuns(Consumer<ListDataSourceRunsRequest.Builder> listDataSourceRunsRequest)

Lists data source runs in Amazon DataZone.

default ListDataSourceRunsResponse

listDataSourceRuns(ListDataSourceRunsRequest listDataSourceRunsRequest)

Lists data source runs in Amazon DataZone.

default ListDataSourceRunsIterable

listDataSourceRunsPaginator(Consumer<ListDataSourceRunsRequest.Builder> listDataSourceRunsRequest)

This is a variant of listDataSourceRuns(software.amazon.awssdk.services.datazone.model.ListDataSourceRunsRequest) operation.

default ListDataSourceRunsIterable

listDataSourceRunsPaginator(ListDataSourceRunsRequest listDataSourceRunsRequest)

This is a variant of listDataSourceRuns(software.amazon.awssdk.services.datazone.model.ListDataSourceRunsRequest) operation.

default ListDataSourcesResponse

listDataSources(Consumer<ListDataSourcesRequest.Builder> listDataSourcesRequest)

Lists data sources in Amazon DataZone.

default ListDataSourcesResponse

listDataSources(ListDataSourcesRequest listDataSourcesRequest)

Lists data sources in Amazon DataZone.

default ListDataSourcesIterable

listDataSourcesPaginator(Consumer<ListDataSourcesRequest.Builder> listDataSourcesRequest)

This is a variant of listDataSources(software.amazon.awssdk.services.datazone.model.ListDataSourcesRequest) operation.

default ListDataSourcesIterable

listDataSourcesPaginator(ListDataSourcesRequest listDataSourcesRequest)

This is a variant of listDataSources(software.amazon.awssdk.services.datazone.model.ListDataSourcesRequest) operation.

default ListDomainsResponse

listDomains(Consumer<ListDomainsRequest.Builder> listDomainsRequest)

Lists Amazon DataZone domains.

default ListDomainsResponse

listDomains(ListDomainsRequest listDomainsRequest)

Lists Amazon DataZone domains.

default ListDomainsIterable

listDomainsPaginator(Consumer<ListDomainsRequest.Builder> listDomainsRequest)

This is a variant of listDomains(software.amazon.awssdk.services.datazone.model.ListDomainsRequest) operation.

default ListDomainsIterable

listDomainsPaginator(ListDomainsRequest listDomainsRequest)

This is a variant of listDomains(software.amazon.awssdk.services.datazone.model.ListDomainsRequest) operation.

default ListEnvironmentBlueprintConfigurationsResponse

listEnvironmentBlueprintConfigurations(Consumer<ListEnvironmentBlueprintConfigurationsRequest.Builder> listEnvironmentBlueprintConfigurationsRequest)

Lists blueprint configurations for a Amazon DataZone environment.

default ListEnvironmentBlueprintConfigurationsResponse

listEnvironmentBlueprintConfigurations(ListEnvironmentBlueprintConfigurationsRequest listEnvironmentBlueprintConfigurationsRequest)

Lists blueprint configurations for a Amazon DataZone environment.

default ListEnvironmentBlueprintConfigurationsIterable

listEnvironmentBlueprintConfigurationsPaginator(Consumer<ListEnvironmentBlueprintConfigurationsRequest.Builder> listEnvironmentBlueprintConfigurationsRequest)

This is a variant of listEnvironmentBlueprintConfigurations(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsRequest) operation.

default ListEnvironmentBlueprintConfigurationsIterable

listEnvironmentBlueprintConfigurationsPaginator(ListEnvironmentBlueprintConfigurationsRequest listEnvironmentBlueprintConfigurationsRequest)

This is a variant of listEnvironmentBlueprintConfigurations(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsRequest) operation.

default ListEnvironmentBlueprintsResponse

listEnvironmentBlueprints(Consumer<ListEnvironmentBlueprintsRequest.Builder> listEnvironmentBlueprintsRequest)

Lists blueprints in an Amazon DataZone environment.

default ListEnvironmentBlueprintsResponse

listEnvironmentBlueprints(ListEnvironmentBlueprintsRequest listEnvironmentBlueprintsRequest)

Lists blueprints in an Amazon DataZone environment.

default ListEnvironmentBlueprintsIterable

listEnvironmentBlueprintsPaginator(Consumer<ListEnvironmentBlueprintsRequest.Builder> listEnvironmentBlueprintsRequest)

This is a variant of listEnvironmentBlueprints(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsRequest) operation.

default ListEnvironmentBlueprintsIterable

listEnvironmentBlueprintsPaginator(ListEnvironmentBlueprintsRequest listEnvironmentBlueprintsRequest)

This is a variant of listEnvironmentBlueprints(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsRequest) operation.

default ListEnvironmentProfilesResponse

listEnvironmentProfiles(Consumer<ListEnvironmentProfilesRequest.Builder> listEnvironmentProfilesRequest)

Lists Amazon DataZone environment profiles.

default ListEnvironmentProfilesResponse

listEnvironmentProfiles(ListEnvironmentProfilesRequest listEnvironmentProfilesRequest)

Lists Amazon DataZone environment profiles.

default ListEnvironmentProfilesIterable

listEnvironmentProfilesPaginator(Consumer<ListEnvironmentProfilesRequest.Builder> listEnvironmentProfilesRequest)

This is a variant of listEnvironmentProfiles(software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesRequest) operation.

default ListEnvironmentProfilesIterable

listEnvironmentProfilesPaginator(ListEnvironmentProfilesRequest listEnvironmentProfilesRequest)

This is a variant of listEnvironmentProfiles(software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesRequest) operation.

default ListEnvironmentsResponse

listEnvironments(Consumer<ListEnvironmentsRequest.Builder> listEnvironmentsRequest)

Lists Amazon DataZone environments.

default ListEnvironmentsResponse

listEnvironments(ListEnvironmentsRequest listEnvironmentsRequest)

Lists Amazon DataZone environments.

default ListEnvironmentsIterable

listEnvironmentsPaginator(Consumer<ListEnvironmentsRequest.Builder> listEnvironmentsRequest)

This is a variant of listEnvironments(software.amazon.awssdk.services.datazone.model.ListEnvironmentsRequest) operation.

default ListEnvironmentsIterable

listEnvironmentsPaginator(ListEnvironmentsRequest listEnvironmentsRequest)

This is a variant of listEnvironments(software.amazon.awssdk.services.datazone.model.ListEnvironmentsRequest) operation.

default ListMetadataGenerationRunsResponse

listMetadataGenerationRuns(Consumer<ListMetadataGenerationRunsRequest.Builder> listMetadataGenerationRunsRequest)

Lists all metadata generation runs.

default ListMetadataGenerationRunsResponse

listMetadataGenerationRuns(ListMetadataGenerationRunsRequest listMetadataGenerationRunsRequest)

Lists all metadata generation runs.

default ListMetadataGenerationRunsIterable

listMetadataGenerationRunsPaginator(Consumer<ListMetadataGenerationRunsRequest.Builder> listMetadataGenerationRunsRequest)

This is a variant of listMetadataGenerationRuns(software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsRequest) operation.

default ListMetadataGenerationRunsIterable

listMetadataGenerationRunsPaginator(ListMetadataGenerationRunsRequest listMetadataGenerationRunsRequest)

This is a variant of listMetadataGenerationRuns(software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsRequest) operation.

default ListNotificationsResponse

listNotifications(Consumer<ListNotificationsRequest.Builder> listNotificationsRequest)

Lists all Amazon DataZone notifications.

default ListNotificationsResponse

listNotifications(ListNotificationsRequest listNotificationsRequest)

Lists all Amazon DataZone notifications.

default ListNotificationsIterable

listNotificationsPaginator(Consumer<ListNotificationsRequest.Builder> listNotificationsRequest)

This is a variant of listNotifications(software.amazon.awssdk.services.datazone.model.ListNotificationsRequest) operation.

default ListNotificationsIterable

listNotificationsPaginator(ListNotificationsRequest listNotificationsRequest)

This is a variant of listNotifications(software.amazon.awssdk.services.datazone.model.ListNotificationsRequest) operation.

default ListProjectMembershipsResponse

listProjectMemberships(Consumer<ListProjectMembershipsRequest.Builder> listProjectMembershipsRequest)

Lists all members of the specified project.

default ListProjectMembershipsResponse

listProjectMemberships(ListProjectMembershipsRequest listProjectMembershipsRequest)

Lists all members of the specified project.

default ListProjectMembershipsIterable

listProjectMembershipsPaginator(Consumer<ListProjectMembershipsRequest.Builder> listProjectMembershipsRequest)

This is a variant of listProjectMemberships(software.amazon.awssdk.services.datazone.model.ListProjectMembershipsRequest) operation.

default ListProjectMembershipsIterable

listProjectMembershipsPaginator(ListProjectMembershipsRequest listProjectMembershipsRequest)

This is a variant of listProjectMemberships(software.amazon.awssdk.services.datazone.model.ListProjectMembershipsRequest) operation.

default ListProjectsResponse

listProjects(Consumer<ListProjectsRequest.Builder> listProjectsRequest)

Lists Amazon DataZone projects.

default ListProjectsResponse

listProjects(ListProjectsRequest listProjectsRequest)

Lists Amazon DataZone projects.

default ListProjectsIterable

listProjectsPaginator(Consumer<ListProjectsRequest.Builder> listProjectsRequest)

This is a variant of listProjects(software.amazon.awssdk.services.datazone.model.ListProjectsRequest) operation.

default ListProjectsIterable

listProjectsPaginator(ListProjectsRequest listProjectsRequest)

This is a variant of listProjects(software.amazon.awssdk.services.datazone.model.ListProjectsRequest) operation.

default ListSubscriptionGrantsResponse

listSubscriptionGrants(Consumer<ListSubscriptionGrantsRequest.Builder> listSubscriptionGrantsRequest)

Lists subscription grants.

default ListSubscriptionGrantsResponse

listSubscriptionGrants(ListSubscriptionGrantsRequest listSubscriptionGrantsRequest)

Lists subscription grants.

default ListSubscriptionGrantsIterable

listSubscriptionGrantsPaginator(Consumer<ListSubscriptionGrantsRequest.Builder> listSubscriptionGrantsRequest)

This is a variant of listSubscriptionGrants(software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsRequest) operation.

default ListSubscriptionGrantsIterable

listSubscriptionGrantsPaginator(ListSubscriptionGrantsRequest listSubscriptionGrantsRequest)

This is a variant of listSubscriptionGrants(software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsRequest) operation.

default ListSubscriptionRequestsResponse

listSubscriptionRequests(Consumer<ListSubscriptionRequestsRequest.Builder> listSubscriptionRequestsRequest)

Lists Amazon DataZone subscription requests.

default ListSubscriptionRequestsResponse

listSubscriptionRequests(ListSubscriptionRequestsRequest listSubscriptionRequestsRequest)

Lists Amazon DataZone subscription requests.

default ListSubscriptionRequestsIterable

listSubscriptionRequestsPaginator(Consumer<ListSubscriptionRequestsRequest.Builder> listSubscriptionRequestsRequest)

This is a variant of listSubscriptionRequests(software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsRequest) operation.

default ListSubscriptionRequestsIterable

listSubscriptionRequestsPaginator(ListSubscriptionRequestsRequest listSubscriptionRequestsRequest)

This is a variant of listSubscriptionRequests(software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsRequest) operation.

default ListSubscriptionsResponse

listSubscriptions(Consumer<ListSubscriptionsRequest.Builder> listSubscriptionsRequest)

Lists subscriptions in Amazon DataZone.

default ListSubscriptionsResponse

listSubscriptions(ListSubscriptionsRequest listSubscriptionsRequest)

Lists subscriptions in Amazon DataZone.

default ListSubscriptionsIterable

listSubscriptionsPaginator(Consumer<ListSubscriptionsRequest.Builder> listSubscriptionsRequest)

This is a variant of listSubscriptions(software.amazon.awssdk.services.datazone.model.ListSubscriptionsRequest) operation.

default ListSubscriptionsIterable

listSubscriptionsPaginator(ListSubscriptionsRequest listSubscriptionsRequest)

This is a variant of listSubscriptions(software.amazon.awssdk.services.datazone.model.ListSubscriptionsRequest) operation.

default ListSubscriptionTargetsResponse

listSubscriptionTargets(Consumer<ListSubscriptionTargetsRequest.Builder> listSubscriptionTargetsRequest)

Lists subscription targets in Amazon DataZone.

default ListSubscriptionTargetsResponse

listSubscriptionTargets(ListSubscriptionTargetsRequest listSubscriptionTargetsRequest)

Lists subscription targets in Amazon DataZone.

default ListSubscriptionTargetsIterable

listSubscriptionTargetsPaginator(Consumer<ListSubscriptionTargetsRequest.Builder> listSubscriptionTargetsRequest)

This is a variant of listSubscriptionTargets(software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsRequest) operation.

default ListSubscriptionTargetsIterable

listSubscriptionTargetsPaginator(ListSubscriptionTargetsRequest listSubscriptionTargetsRequest)

This is a variant of listSubscriptionTargets(software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsRequest) operation.

default ListTagsForResourceResponse

listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)

Lists tags for the specified resource in Amazon DataZone.

default ListTagsForResourceResponse

listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)

Lists tags for the specified resource in Amazon DataZone.

default ListTimeSeriesDataPointsResponse

listTimeSeriesDataPoints(Consumer<ListTimeSeriesDataPointsRequest.Builder> listTimeSeriesDataPointsRequest)

Lists time series data points.

default ListTimeSeriesDataPointsResponse

listTimeSeriesDataPoints(ListTimeSeriesDataPointsRequest listTimeSeriesDataPointsRequest)

Lists time series data points.

default ListTimeSeriesDataPointsIterable

listTimeSeriesDataPointsPaginator(Consumer<ListTimeSeriesDataPointsRequest.Builder> listTimeSeriesDataPointsRequest)

This is a variant of listTimeSeriesDataPoints(software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsRequest) operation.

default ListTimeSeriesDataPointsIterable

listTimeSeriesDataPointsPaginator(ListTimeSeriesDataPointsRequest listTimeSeriesDataPointsRequest)

This is a variant of listTimeSeriesDataPoints(software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsRequest) operation.

default PostTimeSeriesDataPointsResponse

postTimeSeriesDataPoints(Consumer<PostTimeSeriesDataPointsRequest.Builder> postTimeSeriesDataPointsRequest)

Posts time series data points to Amazon DataZone for the specified asset.

default PostTimeSeriesDataPointsResponse

postTimeSeriesDataPoints(PostTimeSeriesDataPointsRequest postTimeSeriesDataPointsRequest)

Posts time series data points to Amazon DataZone for the specified asset.

default PutEnvironmentBlueprintConfigurationResponse

putEnvironmentBlueprintConfiguration(Consumer<PutEnvironmentBlueprintConfigurationRequest.Builder> putEnvironmentBlueprintConfigurationRequest)

Writes the configuration for the specified environment blueprint in Amazon DataZone.

default PutEnvironmentBlueprintConfigurationResponse

putEnvironmentBlueprintConfiguration(PutEnvironmentBlueprintConfigurationRequest putEnvironmentBlueprintConfigurationRequest)

Writes the configuration for the specified environment blueprint in Amazon DataZone.

default RejectPredictionsResponse

rejectPredictions(Consumer<RejectPredictionsRequest.Builder> rejectPredictionsRequest)

Rejects automatically generated business-friendly metadata for your Amazon DataZone assets.

default RejectPredictionsResponse

rejectPredictions(RejectPredictionsRequest rejectPredictionsRequest)

Rejects automatically generated business-friendly metadata for your Amazon DataZone assets.

default RejectSubscriptionRequestResponse

rejectSubscriptionRequest(Consumer<RejectSubscriptionRequestRequest.Builder> rejectSubscriptionRequestRequest)

Rejects the specified subscription request.

default RejectSubscriptionRequestResponse

rejectSubscriptionRequest(RejectSubscriptionRequestRequest rejectSubscriptionRequestRequest)

Rejects the specified subscription request.

default RevokeSubscriptionResponse

revokeSubscription(Consumer<RevokeSubscriptionRequest.Builder> revokeSubscriptionRequest)

Revokes a specified subscription in Amazon DataZone.

default RevokeSubscriptionResponse

revokeSubscription(RevokeSubscriptionRequest revokeSubscriptionRequest)

Revokes a specified subscription in Amazon DataZone.

default SearchResponse

search(Consumer<SearchRequest.Builder> searchRequest)

Searches for assets in Amazon DataZone.

default SearchResponse

search(SearchRequest searchRequest)

Searches for assets in Amazon DataZone.

default SearchGroupProfilesResponse

searchGroupProfiles(Consumer<SearchGroupProfilesRequest.Builder> searchGroupProfilesRequest)

Searches group profiles in Amazon DataZone.

default SearchGroupProfilesResponse

searchGroupProfiles(SearchGroupProfilesRequest searchGroupProfilesRequest)

Searches group profiles in Amazon DataZone.

default SearchGroupProfilesIterable

searchGroupProfilesPaginator(Consumer<SearchGroupProfilesRequest.Builder> searchGroupProfilesRequest)

This is a variant of searchGroupProfiles(software.amazon.awssdk.services.datazone.model.SearchGroupProfilesRequest) operation.

default SearchGroupProfilesIterable

searchGroupProfilesPaginator(SearchGroupProfilesRequest searchGroupProfilesRequest)

This is a variant of searchGroupProfiles(software.amazon.awssdk.services.datazone.model.SearchGroupProfilesRequest) operation.

default SearchListingsResponse

searchListings(Consumer<SearchListingsRequest.Builder> searchListingsRequest)

Searches listings (records of an asset at a given time) in Amazon DataZone.

default SearchListingsResponse

searchListings(SearchListingsRequest searchListingsRequest)

Searches listings (records of an asset at a given time) in Amazon DataZone.

default SearchListingsIterable

searchListingsPaginator(Consumer<SearchListingsRequest.Builder> searchListingsRequest)

This is a variant of searchListings(software.amazon.awssdk.services.datazone.model.SearchListingsRequest) operation.

default SearchListingsIterable

searchListingsPaginator(SearchListingsRequest searchListingsRequest)

This is a variant of searchListings(software.amazon.awssdk.services.datazone.model.SearchListingsRequest) operation.

default SearchIterable

searchPaginator(Consumer<SearchRequest.Builder> searchRequest)

This is a variant of search(software.amazon.awssdk.services.datazone.model.SearchRequest) operation.

default SearchIterable

searchPaginator(SearchRequest searchRequest)

This is a variant of search(software.amazon.awssdk.services.datazone.model.SearchRequest) operation.

default SearchTypesResponse

searchTypes(Consumer<SearchTypesRequest.Builder> searchTypesRequest)

Searches for types in Amazon DataZone.

default SearchTypesResponse

searchTypes(SearchTypesRequest searchTypesRequest)

Searches for types in Amazon DataZone.

default SearchTypesIterable

searchTypesPaginator(Consumer<SearchTypesRequest.Builder> searchTypesRequest)

This is a variant of searchTypes(software.amazon.awssdk.services.datazone.model.SearchTypesRequest) operation.

default SearchTypesIterable

searchTypesPaginator(SearchTypesRequest searchTypesRequest)

This is a variant of searchTypes(software.amazon.awssdk.services.datazone.model.SearchTypesRequest) operation.

default SearchUserProfilesResponse

searchUserProfiles(Consumer<SearchUserProfilesRequest.Builder> searchUserProfilesRequest)

Searches user profiles in Amazon DataZone.

default SearchUserProfilesResponse

searchUserProfiles(SearchUserProfilesRequest searchUserProfilesRequest)

Searches user profiles in Amazon DataZone.

default SearchUserProfilesIterable

searchUserProfilesPaginator(Consumer<SearchUserProfilesRequest.Builder> searchUserProfilesRequest)

This is a variant of searchUserProfiles(software.amazon.awssdk.services.datazone.model.SearchUserProfilesRequest) operation.

default SearchUserProfilesIterable

searchUserProfilesPaginator(SearchUserProfilesRequest searchUserProfilesRequest)

This is a variant of searchUserProfiles(software.amazon.awssdk.services.datazone.model.SearchUserProfilesRequest) operation.

default DataZoneServiceClientConfiguration

serviceClientConfiguration()

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

static ServiceMetadata

serviceMetadata()

default StartDataSourceRunResponse

startDataSourceRun(Consumer<StartDataSourceRunRequest.Builder> startDataSourceRunRequest)

Start the run of the specified data source in Amazon DataZone.

default StartDataSourceRunResponse

startDataSourceRun(StartDataSourceRunRequest startDataSourceRunRequest)

Start the run of the specified data source in Amazon DataZone.

default StartMetadataGenerationRunResponse

startMetadataGenerationRun(Consumer<StartMetadataGenerationRunRequest.Builder> startMetadataGenerationRunRequest)

Starts the metadata generation run.

default StartMetadataGenerationRunResponse

startMetadataGenerationRun(StartMetadataGenerationRunRequest startMetadataGenerationRunRequest)

Starts the metadata generation run.

default TagResourceResponse

tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

Tags a resource in Amazon DataZone.

default TagResourceResponse

tagResource(TagResourceRequest tagResourceRequest)

Tags a resource in Amazon DataZone.

default UntagResourceResponse

untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

Untags a resource in Amazon DataZone.

default UntagResourceResponse

untagResource(UntagResourceRequest untagResourceRequest)

Untags a resource in Amazon DataZone.

default UpdateDataSourceResponse

updateDataSource(Consumer<UpdateDataSourceRequest.Builder> updateDataSourceRequest)

Updates the specified data source in Amazon DataZone.

default UpdateDataSourceResponse

updateDataSource(UpdateDataSourceRequest updateDataSourceRequest)

Updates the specified data source in Amazon DataZone.

default UpdateDomainResponse

updateDomain(Consumer<UpdateDomainRequest.Builder> updateDomainRequest)

Updates a Amazon DataZone domain.

default UpdateDomainResponse

updateDomain(UpdateDomainRequest updateDomainRequest)

Updates a Amazon DataZone domain.

default UpdateEnvironmentResponse

updateEnvironment(Consumer<UpdateEnvironmentRequest.Builder> updateEnvironmentRequest)

Updates the specified environment in Amazon DataZone.

default UpdateEnvironmentResponse

updateEnvironment(UpdateEnvironmentRequest updateEnvironmentRequest)

Updates the specified environment in Amazon DataZone.

default UpdateEnvironmentProfileResponse

updateEnvironmentProfile(Consumer<UpdateEnvironmentProfileRequest.Builder> updateEnvironmentProfileRequest)

Updates the specified environment profile in Amazon DataZone.

default UpdateEnvironmentProfileResponse

updateEnvironmentProfile(UpdateEnvironmentProfileRequest updateEnvironmentProfileRequest)

Updates the specified environment profile in Amazon DataZone.

default UpdateGlossaryResponse

updateGlossary(Consumer<UpdateGlossaryRequest.Builder> updateGlossaryRequest)

Updates the business glossary in Amazon DataZone.

default UpdateGlossaryResponse

updateGlossary(UpdateGlossaryRequest updateGlossaryRequest)

Updates the business glossary in Amazon DataZone.

default UpdateGlossaryTermResponse

updateGlossaryTerm(Consumer<UpdateGlossaryTermRequest.Builder> updateGlossaryTermRequest)

Updates a business glossary term in Amazon DataZone.

default UpdateGlossaryTermResponse

updateGlossaryTerm(UpdateGlossaryTermRequest updateGlossaryTermRequest)

Updates a business glossary term in Amazon DataZone.

default UpdateGroupProfileResponse

updateGroupProfile(Consumer<UpdateGroupProfileRequest.Builder> updateGroupProfileRequest)

Updates the specified group profile in Amazon DataZone.

default UpdateGroupProfileResponse

updateGroupProfile(UpdateGroupProfileRequest updateGroupProfileRequest)

Updates the specified group profile in Amazon DataZone.

default UpdateProjectResponse

updateProject(Consumer<UpdateProjectRequest.Builder> updateProjectRequest)

Updates the specified project in Amazon DataZone.

default UpdateProjectResponse

updateProject(UpdateProjectRequest updateProjectRequest)

Updates the specified project in Amazon DataZone.

default UpdateSubscriptionGrantStatusResponse

updateSubscriptionGrantStatus(Consumer<UpdateSubscriptionGrantStatusRequest.Builder> updateSubscriptionGrantStatusRequest)

Updates the status of the specified subscription grant status in Amazon DataZone.

default UpdateSubscriptionGrantStatusResponse

updateSubscriptionGrantStatus(UpdateSubscriptionGrantStatusRequest updateSubscriptionGrantStatusRequest)

Updates the status of the specified subscription grant status in Amazon DataZone.

default UpdateSubscriptionRequestResponse

updateSubscriptionRequest(Consumer<UpdateSubscriptionRequestRequest.Builder> updateSubscriptionRequestRequest)

Updates a specified subscription request in Amazon DataZone.

default UpdateSubscriptionRequestResponse

updateSubscriptionRequest(UpdateSubscriptionRequestRequest updateSubscriptionRequestRequest)

Updates a specified subscription request in Amazon DataZone.

default UpdateSubscriptionTargetResponse

updateSubscriptionTarget(Consumer<UpdateSubscriptionTargetRequest.Builder> updateSubscriptionTargetRequest)

Updates the specified subscription target in Amazon DataZone.

default UpdateSubscriptionTargetResponse

updateSubscriptionTarget(UpdateSubscriptionTargetRequest updateSubscriptionTargetRequest)

Updates the specified subscription target in Amazon DataZone.

default UpdateUserProfileResponse

updateUserProfile(Consumer<UpdateUserProfileRequest.Builder> updateUserProfileRequest)

Updates the specified user profile in Amazon DataZone.

default UpdateUserProfileResponse

updateUserProfile(UpdateUserProfileRequest updateUserProfileRequest)

Updates the specified user profile in Amazon DataZone.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Field Details
- SERVICE_NAME
  
  static final String SERVICE_NAME
  See Also:
  
  Constant Field Values
- SERVICE_METADATA_ID
  
  static final String SERVICE_METADATA_ID
  
  Value for looking up the service's metadata from the ServiceMetadataProvider.
  See Also:
  
  Constant Field Values
Method Details
- acceptPredictions
  
  default AcceptPredictionsResponse acceptPredictions(AcceptPredictionsRequest acceptPredictionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Accepts automatically generated business-friendly metadata for your Amazon DataZone assets.
  Parameters:
  
  acceptPredictionsRequest -
  
  Returns:
  
  Result of the AcceptPredictions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- acceptPredictions
  
  default AcceptPredictionsResponse acceptPredictions(Consumer<AcceptPredictionsRequest.Builder> acceptPredictionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Accepts automatically generated business-friendly metadata for your Amazon DataZone assets.
  
  This is a convenience which creates an instance of the AcceptPredictionsRequest.Builder avoiding the need to create one manually via AcceptPredictionsRequest.builder()
  Parameters:
  
  acceptPredictionsRequest - A Consumer that will call methods on AcceptPredictionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the AcceptPredictions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- acceptSubscriptionRequest
  
  default AcceptSubscriptionRequestResponse acceptSubscriptionRequest(AcceptSubscriptionRequestRequest acceptSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Accepts a subscription request to a specific asset.
  Parameters:
  
  acceptSubscriptionRequestRequest -
  
  Returns:
  
  Result of the AcceptSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- acceptSubscriptionRequest
  
  default AcceptSubscriptionRequestResponse acceptSubscriptionRequest(Consumer<AcceptSubscriptionRequestRequest.Builder> acceptSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Accepts a subscription request to a specific asset.
  
  This is a convenience which creates an instance of the AcceptSubscriptionRequestRequest.Builder avoiding the need to create one manually via AcceptSubscriptionRequestRequest.builder()
  Parameters:
  
  acceptSubscriptionRequestRequest - A Consumer that will call methods on AcceptSubscriptionRequestRequest.Builder to create a request.
  
  Returns:
  
  Result of the AcceptSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- cancelMetadataGenerationRun
  
  default CancelMetadataGenerationRunResponse cancelMetadataGenerationRun(CancelMetadataGenerationRunRequest cancelMetadataGenerationRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Cancels the metadata generation run.
  Parameters:
  
  cancelMetadataGenerationRunRequest -
  
  Returns:
  
  Result of the CancelMetadataGenerationRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- cancelMetadataGenerationRun
  
  default CancelMetadataGenerationRunResponse cancelMetadataGenerationRun(Consumer<CancelMetadataGenerationRunRequest.Builder> cancelMetadataGenerationRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Cancels the metadata generation run.
  
  This is a convenience which creates an instance of the CancelMetadataGenerationRunRequest.Builder avoiding the need to create one manually via CancelMetadataGenerationRunRequest.builder()
  Parameters:
  
  cancelMetadataGenerationRunRequest - A Consumer that will call methods on CancelMetadataGenerationRunRequest.Builder to create a request.
  
  Returns:
  
  Result of the CancelMetadataGenerationRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- cancelSubscription
  
  default CancelSubscriptionResponse cancelSubscription(CancelSubscriptionRequest cancelSubscriptionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Cancels the subscription to the specified asset.
  Parameters:
  
  cancelSubscriptionRequest -
  
  Returns:
  
  Result of the CancelSubscription operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- cancelSubscription
  
  default CancelSubscriptionResponse cancelSubscription(Consumer<CancelSubscriptionRequest.Builder> cancelSubscriptionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Cancels the subscription to the specified asset.
  
  This is a convenience which creates an instance of the CancelSubscriptionRequest.Builder avoiding the need to create one manually via CancelSubscriptionRequest.builder()
  Parameters:
  
  cancelSubscriptionRequest - A Consumer that will call methods on CancelSubscriptionRequest.Builder to create a request.
  
  Returns:
  
  Result of the CancelSubscription operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAsset
  
  default CreateAssetResponse createAsset(CreateAssetRequest createAssetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an asset in Amazon DataZone catalog.
  Parameters:
  
  createAssetRequest -
  
  Returns:
  
  Result of the CreateAsset operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAsset
  
  default CreateAssetResponse createAsset(Consumer<CreateAssetRequest.Builder> createAssetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an asset in Amazon DataZone catalog.
  
  This is a convenience which creates an instance of the CreateAssetRequest.Builder avoiding the need to create one manually via CreateAssetRequest.builder()
  Parameters:
  
  createAssetRequest - A Consumer that will call methods on CreateAssetRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateAsset operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAssetRevision
  
  default CreateAssetRevisionResponse createAssetRevision(CreateAssetRevisionRequest createAssetRevisionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a revision of the asset.
  Parameters:
  
  createAssetRevisionRequest -
  
  Returns:
  
  Result of the CreateAssetRevision operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAssetRevision
  
  default CreateAssetRevisionResponse createAssetRevision(Consumer<CreateAssetRevisionRequest.Builder> createAssetRevisionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a revision of the asset.
  
  This is a convenience which creates an instance of the CreateAssetRevisionRequest.Builder avoiding the need to create one manually via CreateAssetRevisionRequest.builder()
  Parameters:
  
  createAssetRevisionRequest - A Consumer that will call methods on CreateAssetRevisionRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateAssetRevision operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAssetType
  
  default CreateAssetTypeResponse createAssetType(CreateAssetTypeRequest createAssetTypeRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a custom asset type.
  Parameters:
  
  createAssetTypeRequest -
  
  Returns:
  
  Result of the CreateAssetType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAssetType
  
  default CreateAssetTypeResponse createAssetType(Consumer<CreateAssetTypeRequest.Builder> createAssetTypeRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a custom asset type.
  
  This is a convenience which creates an instance of the CreateAssetTypeRequest.Builder avoiding the need to create one manually via CreateAssetTypeRequest.builder()
  Parameters:
  
  createAssetTypeRequest - A Consumer that will call methods on CreateAssetTypeRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateAssetType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDataSource
  
  default CreateDataSourceResponse createDataSource(CreateDataSourceRequest createDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone data source.
  Parameters:
  
  createDataSourceRequest -
  
  Returns:
  
  Result of the CreateDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDataSource
  
  default CreateDataSourceResponse createDataSource(Consumer<CreateDataSourceRequest.Builder> createDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone data source.
  
  This is a convenience which creates an instance of the CreateDataSourceRequest.Builder avoiding the need to create one manually via CreateDataSourceRequest.builder()
  Parameters:
  
  createDataSourceRequest - A Consumer that will call methods on CreateDataSourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDomain
  
  default CreateDomainResponse createDomain(CreateDomainRequest createDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone domain.
  Parameters:
  
  createDomainRequest -
  
  Returns:
  
  Result of the CreateDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDomain
  
  default CreateDomainResponse createDomain(Consumer<CreateDomainRequest.Builder> createDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone domain.
  
  This is a convenience which creates an instance of the CreateDomainRequest.Builder avoiding the need to create one manually via CreateDomainRequest.builder()
  Parameters:
  
  createDomainRequest - A Consumer that will call methods on CreateDomainRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createEnvironment
  
  default CreateEnvironmentResponse createEnvironment(CreateEnvironmentRequest createEnvironmentRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Create an Amazon DataZone environment.
  Parameters:
  
  createEnvironmentRequest -
  
  Returns:
  
  Result of the CreateEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createEnvironment
  
  default CreateEnvironmentResponse createEnvironment(Consumer<CreateEnvironmentRequest.Builder> createEnvironmentRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Create an Amazon DataZone environment.
  
  This is a convenience which creates an instance of the CreateEnvironmentRequest.Builder avoiding the need to create one manually via CreateEnvironmentRequest.builder()
  Parameters:
  
  createEnvironmentRequest - A Consumer that will call methods on CreateEnvironmentRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createEnvironmentProfile
  
  default CreateEnvironmentProfileResponse createEnvironmentProfile(CreateEnvironmentProfileRequest createEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone environment profile.
  Parameters:
  
  createEnvironmentProfileRequest -
  
  Returns:
  
  Result of the CreateEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createEnvironmentProfile
  
  default CreateEnvironmentProfileResponse createEnvironmentProfile(Consumer<CreateEnvironmentProfileRequest.Builder> createEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone environment profile.
  
  This is a convenience which creates an instance of the CreateEnvironmentProfileRequest.Builder avoiding the need to create one manually via CreateEnvironmentProfileRequest.builder()
  Parameters:
  
  createEnvironmentProfileRequest - A Consumer that will call methods on CreateEnvironmentProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createFormType
  
  default CreateFormTypeResponse createFormType(CreateFormTypeRequest createFormTypeRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a metadata form type.
  Parameters:
  
  createFormTypeRequest -
  
  Returns:
  
  Result of the CreateFormType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createFormType
  
  default CreateFormTypeResponse createFormType(Consumer<CreateFormTypeRequest.Builder> createFormTypeRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a metadata form type.
  
  This is a convenience which creates an instance of the CreateFormTypeRequest.Builder avoiding the need to create one manually via CreateFormTypeRequest.builder()
  Parameters:
  
  createFormTypeRequest - A Consumer that will call methods on CreateFormTypeRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateFormType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createGlossary
  
  default CreateGlossaryResponse createGlossary(CreateGlossaryRequest createGlossaryRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone business glossary.
  Parameters:
  
  createGlossaryRequest -
  
  Returns:
  
  Result of the CreateGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createGlossary
  
  default CreateGlossaryResponse createGlossary(Consumer<CreateGlossaryRequest.Builder> createGlossaryRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone business glossary.
  
  This is a convenience which creates an instance of the CreateGlossaryRequest.Builder avoiding the need to create one manually via CreateGlossaryRequest.builder()
  Parameters:
  
  createGlossaryRequest - A Consumer that will call methods on CreateGlossaryRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createGlossaryTerm
  
  default CreateGlossaryTermResponse createGlossaryTerm(CreateGlossaryTermRequest createGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a business glossary term.
  Parameters:
  
  createGlossaryTermRequest -
  
  Returns:
  
  Result of the CreateGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createGlossaryTerm
  
  default CreateGlossaryTermResponse createGlossaryTerm(Consumer<CreateGlossaryTermRequest.Builder> createGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a business glossary term.
  
  This is a convenience which creates an instance of the CreateGlossaryTermRequest.Builder avoiding the need to create one manually via CreateGlossaryTermRequest.builder()
  Parameters:
  
  createGlossaryTermRequest - A Consumer that will call methods on CreateGlossaryTermRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createGroupProfile
  
  default CreateGroupProfileResponse createGroupProfile(CreateGroupProfileRequest createGroupProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a group profile in Amazon DataZone.
  Parameters:
  
  createGroupProfileRequest -
  
  Returns:
  
  Result of the CreateGroupProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createGroupProfile
  
  default CreateGroupProfileResponse createGroupProfile(Consumer<CreateGroupProfileRequest.Builder> createGroupProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a group profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the CreateGroupProfileRequest.Builder avoiding the need to create one manually via CreateGroupProfileRequest.builder()
  Parameters:
  
  createGroupProfileRequest - A Consumer that will call methods on CreateGroupProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateGroupProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createListingChangeSet
  
  default CreateListingChangeSetResponse createListingChangeSet(CreateListingChangeSetRequest createListingChangeSetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Publishes a listing (a record of an asset at a given time) or removes a listing from the catalog.
  Parameters:
  
  createListingChangeSetRequest -
  
  Returns:
  
  Result of the CreateListingChangeSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createListingChangeSet
  
  default CreateListingChangeSetResponse createListingChangeSet(Consumer<CreateListingChangeSetRequest.Builder> createListingChangeSetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Publishes a listing (a record of an asset at a given time) or removes a listing from the catalog.
  
  This is a convenience which creates an instance of the CreateListingChangeSetRequest.Builder avoiding the need to create one manually via CreateListingChangeSetRequest.builder()
  Parameters:
  
  createListingChangeSetRequest - A Consumer that will call methods on CreateListingChangeSetRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateListingChangeSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createProject
  
  default CreateProjectResponse createProject(CreateProjectRequest createProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone project.
  Parameters:
  
  createProjectRequest -
  
  Returns:
  
  Result of the CreateProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createProject
  
  default CreateProjectResponse createProject(Consumer<CreateProjectRequest.Builder> createProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates an Amazon DataZone project.
  
  This is a convenience which creates an instance of the CreateProjectRequest.Builder avoiding the need to create one manually via CreateProjectRequest.builder()
  Parameters:
  
  createProjectRequest - A Consumer that will call methods on CreateProjectRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createProjectMembership
  
  default CreateProjectMembershipResponse createProjectMembership(CreateProjectMembershipRequest createProjectMembershipRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a project membership in Amazon DataZone.
  Parameters:
  
  createProjectMembershipRequest -
  
  Returns:
  
  Result of the CreateProjectMembership operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createProjectMembership
  
  default CreateProjectMembershipResponse createProjectMembership(Consumer<CreateProjectMembershipRequest.Builder> createProjectMembershipRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a project membership in Amazon DataZone.
  
  This is a convenience which creates an instance of the CreateProjectMembershipRequest.Builder avoiding the need to create one manually via CreateProjectMembershipRequest.builder()
  Parameters:
  
  createProjectMembershipRequest - A Consumer that will call methods on CreateProjectMembershipRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateProjectMembership operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createSubscriptionGrant
  
  default CreateSubscriptionGrantResponse createSubscriptionGrant(CreateSubscriptionGrantRequest createSubscriptionGrantRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a subsscription grant in Amazon DataZone.
  Parameters:
  
  createSubscriptionGrantRequest -
  
  Returns:
  
  Result of the CreateSubscriptionGrant operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createSubscriptionGrant
  
  default CreateSubscriptionGrantResponse createSubscriptionGrant(Consumer<CreateSubscriptionGrantRequest.Builder> createSubscriptionGrantRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a subsscription grant in Amazon DataZone.
  
  This is a convenience which creates an instance of the CreateSubscriptionGrantRequest.Builder avoiding the need to create one manually via CreateSubscriptionGrantRequest.builder()
  Parameters:
  
  createSubscriptionGrantRequest - A Consumer that will call methods on CreateSubscriptionGrantRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateSubscriptionGrant operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createSubscriptionRequest
  
  default CreateSubscriptionRequestResponse createSubscriptionRequest(CreateSubscriptionRequestRequest createSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a subscription request in Amazon DataZone.
  Parameters:
  
  createSubscriptionRequestRequest -
  
  Returns:
  
  Result of the CreateSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createSubscriptionRequest
  
  default CreateSubscriptionRequestResponse createSubscriptionRequest(Consumer<CreateSubscriptionRequestRequest.Builder> createSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a subscription request in Amazon DataZone.
  
  This is a convenience which creates an instance of the CreateSubscriptionRequestRequest.Builder avoiding the need to create one manually via CreateSubscriptionRequestRequest.builder()
  Parameters:
  
  createSubscriptionRequestRequest - A Consumer that will call methods on CreateSubscriptionRequestRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createSubscriptionTarget
  
  default CreateSubscriptionTargetResponse createSubscriptionTarget(CreateSubscriptionTargetRequest createSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a subscription target in Amazon DataZone.
  Parameters:
  
  createSubscriptionTargetRequest -
  
  Returns:
  
  Result of the CreateSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createSubscriptionTarget
  
  default CreateSubscriptionTargetResponse createSubscriptionTarget(Consumer<CreateSubscriptionTargetRequest.Builder> createSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a subscription target in Amazon DataZone.
  
  This is a convenience which creates an instance of the CreateSubscriptionTargetRequest.Builder avoiding the need to create one manually via CreateSubscriptionTargetRequest.builder()
  Parameters:
  
  createSubscriptionTargetRequest - A Consumer that will call methods on CreateSubscriptionTargetRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createUserProfile
  
  default CreateUserProfileResponse createUserProfile(CreateUserProfileRequest createUserProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a user profile in Amazon DataZone.
  Parameters:
  
  createUserProfileRequest -
  
  Returns:
  
  Result of the CreateUserProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createUserProfile
  
  default CreateUserProfileResponse createUserProfile(Consumer<CreateUserProfileRequest.Builder> createUserProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Creates a user profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the CreateUserProfileRequest.Builder avoiding the need to create one manually via CreateUserProfileRequest.builder()
  Parameters:
  
  createUserProfileRequest - A Consumer that will call methods on CreateUserProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateUserProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAsset
  
  default DeleteAssetResponse deleteAsset(DeleteAssetRequest deleteAssetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Delets an asset in Amazon DataZone.
  Parameters:
  
  deleteAssetRequest -
  
  Returns:
  
  Result of the DeleteAsset operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAsset
  
  default DeleteAssetResponse deleteAsset(Consumer<DeleteAssetRequest.Builder> deleteAssetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Delets an asset in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteAssetRequest.Builder avoiding the need to create one manually via DeleteAssetRequest.builder()
  Parameters:
  
  deleteAssetRequest - A Consumer that will call methods on DeleteAssetRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteAsset operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAssetType
  
  default DeleteAssetTypeResponse deleteAssetType(DeleteAssetTypeRequest deleteAssetTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes an asset type in Amazon DataZone.
  Parameters:
  
  deleteAssetTypeRequest -
  
  Returns:
  
  Result of the DeleteAssetType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAssetType
  
  default DeleteAssetTypeResponse deleteAssetType(Consumer<DeleteAssetTypeRequest.Builder> deleteAssetTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes an asset type in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteAssetTypeRequest.Builder avoiding the need to create one manually via DeleteAssetTypeRequest.builder()
  Parameters:
  
  deleteAssetTypeRequest - A Consumer that will call methods on DeleteAssetTypeRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteAssetType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDataSource
  
  default DeleteDataSourceResponse deleteDataSource(DeleteDataSourceRequest deleteDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a data source in Amazon DataZone.
  Parameters:
  
  deleteDataSourceRequest -
  
  Returns:
  
  Result of the DeleteDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDataSource
  
  default DeleteDataSourceResponse deleteDataSource(Consumer<DeleteDataSourceRequest.Builder> deleteDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a data source in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteDataSourceRequest.Builder avoiding the need to create one manually via DeleteDataSourceRequest.builder()
  Parameters:
  
  deleteDataSourceRequest - A Consumer that will call methods on DeleteDataSourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDomain
  
  default DeleteDomainResponse deleteDomain(DeleteDomainRequest deleteDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a Amazon DataZone domain.
  Parameters:
  
  deleteDomainRequest -
  
  Returns:
  
  Result of the DeleteDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDomain
  
  default DeleteDomainResponse deleteDomain(Consumer<DeleteDomainRequest.Builder> deleteDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a Amazon DataZone domain.
  
  This is a convenience which creates an instance of the DeleteDomainRequest.Builder avoiding the need to create one manually via DeleteDomainRequest.builder()
  Parameters:
  
  deleteDomainRequest - A Consumer that will call methods on DeleteDomainRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteEnvironment
  
  default DeleteEnvironmentResponse deleteEnvironment(DeleteEnvironmentRequest deleteEnvironmentRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes an environment in Amazon DataZone.
  Parameters:
  
  deleteEnvironmentRequest -
  
  Returns:
  
  Result of the DeleteEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteEnvironment
  
  default DeleteEnvironmentResponse deleteEnvironment(Consumer<DeleteEnvironmentRequest.Builder> deleteEnvironmentRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes an environment in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteEnvironmentRequest.Builder avoiding the need to create one manually via DeleteEnvironmentRequest.builder()
  Parameters:
  
  deleteEnvironmentRequest - A Consumer that will call methods on DeleteEnvironmentRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteEnvironmentBlueprintConfiguration
  
  default DeleteEnvironmentBlueprintConfigurationResponse deleteEnvironmentBlueprintConfiguration(DeleteEnvironmentBlueprintConfigurationRequest deleteEnvironmentBlueprintConfigurationRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes the blueprint configuration in Amazon DataZone.
  Parameters:
  
  deleteEnvironmentBlueprintConfigurationRequest -
  
  Returns:
  
  Result of the DeleteEnvironmentBlueprintConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteEnvironmentBlueprintConfiguration
  
  default DeleteEnvironmentBlueprintConfigurationResponse deleteEnvironmentBlueprintConfiguration(Consumer<DeleteEnvironmentBlueprintConfigurationRequest.Builder> deleteEnvironmentBlueprintConfigurationRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes the blueprint configuration in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteEnvironmentBlueprintConfigurationRequest.Builder avoiding the need to create one manually via DeleteEnvironmentBlueprintConfigurationRequest.builder()
  Parameters:
  
  deleteEnvironmentBlueprintConfigurationRequest - A Consumer that will call methods on DeleteEnvironmentBlueprintConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteEnvironmentBlueprintConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteEnvironmentProfile
  
  default DeleteEnvironmentProfileResponse deleteEnvironmentProfile(DeleteEnvironmentProfileRequest deleteEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes an environment profile in Amazon DataZone.
  Parameters:
  
  deleteEnvironmentProfileRequest -
  
  Returns:
  
  Result of the DeleteEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteEnvironmentProfile
  
  default DeleteEnvironmentProfileResponse deleteEnvironmentProfile(Consumer<DeleteEnvironmentProfileRequest.Builder> deleteEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes an environment profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteEnvironmentProfileRequest.Builder avoiding the need to create one manually via DeleteEnvironmentProfileRequest.builder()
  Parameters:
  
  deleteEnvironmentProfileRequest - A Consumer that will call methods on DeleteEnvironmentProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteFormType
  
  default DeleteFormTypeResponse deleteFormType(DeleteFormTypeRequest deleteFormTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Delets and metadata form type in Amazon DataZone.
  Parameters:
  
  deleteFormTypeRequest -
  
  Returns:
  
  Result of the DeleteFormType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteFormType
  
  default DeleteFormTypeResponse deleteFormType(Consumer<DeleteFormTypeRequest.Builder> deleteFormTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Delets and metadata form type in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteFormTypeRequest.Builder avoiding the need to create one manually via DeleteFormTypeRequest.builder()
  Parameters:
  
  deleteFormTypeRequest - A Consumer that will call methods on DeleteFormTypeRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteFormType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteGlossary
  
  default DeleteGlossaryResponse deleteGlossary(DeleteGlossaryRequest deleteGlossaryRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a business glossary in Amazon DataZone.
  Parameters:
  
  deleteGlossaryRequest -
  
  Returns:
  
  Result of the DeleteGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteGlossary
  
  default DeleteGlossaryResponse deleteGlossary(Consumer<DeleteGlossaryRequest.Builder> deleteGlossaryRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a business glossary in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteGlossaryRequest.Builder avoiding the need to create one manually via DeleteGlossaryRequest.builder()
  Parameters:
  
  deleteGlossaryRequest - A Consumer that will call methods on DeleteGlossaryRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteGlossaryTerm
  
  default DeleteGlossaryTermResponse deleteGlossaryTerm(DeleteGlossaryTermRequest deleteGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a business glossary term in Amazon DataZone.
  Parameters:
  
  deleteGlossaryTermRequest -
  
  Returns:
  
  Result of the DeleteGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteGlossaryTerm
  
  default DeleteGlossaryTermResponse deleteGlossaryTerm(Consumer<DeleteGlossaryTermRequest.Builder> deleteGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a business glossary term in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteGlossaryTermRequest.Builder avoiding the need to create one manually via DeleteGlossaryTermRequest.builder()
  Parameters:
  
  deleteGlossaryTermRequest - A Consumer that will call methods on DeleteGlossaryTermRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteListing
  
  default DeleteListingResponse deleteListing(DeleteListingRequest deleteListingRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a listing (a record of an asset at a given time).
  Parameters:
  
  deleteListingRequest -
  
  Returns:
  
  Result of the DeleteListing operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteListing
  
  default DeleteListingResponse deleteListing(Consumer<DeleteListingRequest.Builder> deleteListingRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a listing (a record of an asset at a given time).
  
  This is a convenience which creates an instance of the DeleteListingRequest.Builder avoiding the need to create one manually via DeleteListingRequest.builder()
  Parameters:
  
  deleteListingRequest - A Consumer that will call methods on DeleteListingRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteListing operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteProject
  
  default DeleteProjectResponse deleteProject(DeleteProjectRequest deleteProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a project in Amazon DataZone.
  Parameters:
  
  deleteProjectRequest -
  
  Returns:
  
  Result of the DeleteProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteProject
  
  default DeleteProjectResponse deleteProject(Consumer<DeleteProjectRequest.Builder> deleteProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a project in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteProjectRequest.Builder avoiding the need to create one manually via DeleteProjectRequest.builder()
  Parameters:
  
  deleteProjectRequest - A Consumer that will call methods on DeleteProjectRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteProjectMembership
  
  default DeleteProjectMembershipResponse deleteProjectMembership(DeleteProjectMembershipRequest deleteProjectMembershipRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes project membership in Amazon DataZone.
  Parameters:
  
  deleteProjectMembershipRequest -
  
  Returns:
  
  Result of the DeleteProjectMembership operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteProjectMembership
  
  default DeleteProjectMembershipResponse deleteProjectMembership(Consumer<DeleteProjectMembershipRequest.Builder> deleteProjectMembershipRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes project membership in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteProjectMembershipRequest.Builder avoiding the need to create one manually via DeleteProjectMembershipRequest.builder()
  Parameters:
  
  deleteProjectMembershipRequest - A Consumer that will call methods on DeleteProjectMembershipRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteProjectMembership operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteSubscriptionGrant
  
  default DeleteSubscriptionGrantResponse deleteSubscriptionGrant(DeleteSubscriptionGrantRequest deleteSubscriptionGrantRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes and subscription grant in Amazon DataZone.
  Parameters:
  
  deleteSubscriptionGrantRequest -
  
  Returns:
  
  Result of the DeleteSubscriptionGrant operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteSubscriptionGrant
  
  default DeleteSubscriptionGrantResponse deleteSubscriptionGrant(Consumer<DeleteSubscriptionGrantRequest.Builder> deleteSubscriptionGrantRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes and subscription grant in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteSubscriptionGrantRequest.Builder avoiding the need to create one manually via DeleteSubscriptionGrantRequest.builder()
  Parameters:
  
  deleteSubscriptionGrantRequest - A Consumer that will call methods on DeleteSubscriptionGrantRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteSubscriptionGrant operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteSubscriptionRequest
  
  default DeleteSubscriptionRequestResponse deleteSubscriptionRequest(DeleteSubscriptionRequestRequest deleteSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a subscription request in Amazon DataZone.
  Parameters:
  
  deleteSubscriptionRequestRequest -
  
  Returns:
  
  Result of the DeleteSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteSubscriptionRequest
  
  default DeleteSubscriptionRequestResponse deleteSubscriptionRequest(Consumer<DeleteSubscriptionRequestRequest.Builder> deleteSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a subscription request in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteSubscriptionRequestRequest.Builder avoiding the need to create one manually via DeleteSubscriptionRequestRequest.builder()
  Parameters:
  
  deleteSubscriptionRequestRequest - A Consumer that will call methods on DeleteSubscriptionRequestRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteSubscriptionTarget
  
  default DeleteSubscriptionTargetResponse deleteSubscriptionTarget(DeleteSubscriptionTargetRequest deleteSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a subscription target in Amazon DataZone.
  Parameters:
  
  deleteSubscriptionTargetRequest -
  
  Returns:
  
  Result of the DeleteSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteSubscriptionTarget
  
  default DeleteSubscriptionTargetResponse deleteSubscriptionTarget(Consumer<DeleteSubscriptionTargetRequest.Builder> deleteSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes a subscription target in Amazon DataZone.
  
  This is a convenience which creates an instance of the DeleteSubscriptionTargetRequest.Builder avoiding the need to create one manually via DeleteSubscriptionTargetRequest.builder()
  Parameters:
  
  deleteSubscriptionTargetRequest - A Consumer that will call methods on DeleteSubscriptionTargetRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTimeSeriesDataPoints
  
  default DeleteTimeSeriesDataPointsResponse deleteTimeSeriesDataPoints(DeleteTimeSeriesDataPointsRequest deleteTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes the specified time series form for the specified asset.
  Parameters:
  
  deleteTimeSeriesDataPointsRequest -
  
  Returns:
  
  Result of the DeleteTimeSeriesDataPoints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTimeSeriesDataPoints
  
  default DeleteTimeSeriesDataPointsResponse deleteTimeSeriesDataPoints(Consumer<DeleteTimeSeriesDataPointsRequest.Builder> deleteTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Deletes the specified time series form for the specified asset.
  
  This is a convenience which creates an instance of the DeleteTimeSeriesDataPointsRequest.Builder avoiding the need to create one manually via DeleteTimeSeriesDataPointsRequest.builder()
  Parameters:
  
  deleteTimeSeriesDataPointsRequest - A Consumer that will call methods on DeleteTimeSeriesDataPointsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteTimeSeriesDataPoints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getAsset
  
  default GetAssetResponse getAsset(GetAssetRequest getAssetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone asset.
  Parameters:
  
  getAssetRequest -
  
  Returns:
  
  Result of the GetAsset operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getAsset
  
  default GetAssetResponse getAsset(Consumer<GetAssetRequest.Builder> getAssetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone asset.
  
  This is a convenience which creates an instance of the GetAssetRequest.Builder avoiding the need to create one manually via GetAssetRequest.builder()
  Parameters:
  
  getAssetRequest - A Consumer that will call methods on GetAssetRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetAsset operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getAssetType
  
  default GetAssetTypeResponse getAssetType(GetAssetTypeRequest getAssetTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone asset type.
  Parameters:
  
  getAssetTypeRequest -
  
  Returns:
  
  Result of the GetAssetType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getAssetType
  
  default GetAssetTypeResponse getAssetType(Consumer<GetAssetTypeRequest.Builder> getAssetTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone asset type.
  
  This is a convenience which creates an instance of the GetAssetTypeRequest.Builder avoiding the need to create one manually via GetAssetTypeRequest.builder()
  Parameters:
  
  getAssetTypeRequest - A Consumer that will call methods on GetAssetTypeRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetAssetType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getDataSource
  
  default GetDataSourceResponse getDataSource(GetDataSourceRequest getDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone data source.
  Parameters:
  
  getDataSourceRequest -
  
  Returns:
  
  Result of the GetDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getDataSource
  
  default GetDataSourceResponse getDataSource(Consumer<GetDataSourceRequest.Builder> getDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone data source.
  
  This is a convenience which creates an instance of the GetDataSourceRequest.Builder avoiding the need to create one manually via GetDataSourceRequest.builder()
  Parameters:
  
  getDataSourceRequest - A Consumer that will call methods on GetDataSourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getDataSourceRun
  
  default GetDataSourceRunResponse getDataSourceRun(GetDataSourceRunRequest getDataSourceRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone data source run.
  Parameters:
  
  getDataSourceRunRequest -
  
  Returns:
  
  Result of the GetDataSourceRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getDataSourceRun
  
  default GetDataSourceRunResponse getDataSourceRun(Consumer<GetDataSourceRunRequest.Builder> getDataSourceRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone data source run.
  
  This is a convenience which creates an instance of the GetDataSourceRunRequest.Builder avoiding the need to create one manually via GetDataSourceRunRequest.builder()
  Parameters:
  
  getDataSourceRunRequest - A Consumer that will call methods on GetDataSourceRunRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetDataSourceRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getDomain
  
  default GetDomainResponse getDomain(GetDomainRequest getDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone domain.
  Parameters:
  
  getDomainRequest -
  
  Returns:
  
  Result of the GetDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getDomain
  
  default GetDomainResponse getDomain(Consumer<GetDomainRequest.Builder> getDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone domain.
  
  This is a convenience which creates an instance of the GetDomainRequest.Builder avoiding the need to create one manually via GetDomainRequest.builder()
  Parameters:
  
  getDomainRequest - A Consumer that will call methods on GetDomainRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironment
  
  default GetEnvironmentResponse getEnvironment(GetEnvironmentRequest getEnvironmentRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone environment.
  Parameters:
  
  getEnvironmentRequest -
  
  Returns:
  
  Result of the GetEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironment
  
  default GetEnvironmentResponse getEnvironment(Consumer<GetEnvironmentRequest.Builder> getEnvironmentRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone environment.
  
  This is a convenience which creates an instance of the GetEnvironmentRequest.Builder avoiding the need to create one manually via GetEnvironmentRequest.builder()
  Parameters:
  
  getEnvironmentRequest - A Consumer that will call methods on GetEnvironmentRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironmentBlueprint
  
  default GetEnvironmentBlueprintResponse getEnvironmentBlueprint(GetEnvironmentBlueprintRequest getEnvironmentBlueprintRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone blueprint.
  Parameters:
  
  getEnvironmentBlueprintRequest -
  
  Returns:
  
  Result of the GetEnvironmentBlueprint operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironmentBlueprint
  
  default GetEnvironmentBlueprintResponse getEnvironmentBlueprint(Consumer<GetEnvironmentBlueprintRequest.Builder> getEnvironmentBlueprintRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an Amazon DataZone blueprint.
  
  This is a convenience which creates an instance of the GetEnvironmentBlueprintRequest.Builder avoiding the need to create one manually via GetEnvironmentBlueprintRequest.builder()
  Parameters:
  
  getEnvironmentBlueprintRequest - A Consumer that will call methods on GetEnvironmentBlueprintRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetEnvironmentBlueprint operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironmentBlueprintConfiguration
  
  default GetEnvironmentBlueprintConfigurationResponse getEnvironmentBlueprintConfiguration(GetEnvironmentBlueprintConfigurationRequest getEnvironmentBlueprintConfigurationRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the blueprint configuration in Amazon DataZone.
  Parameters:
  
  getEnvironmentBlueprintConfigurationRequest -
  
  Returns:
  
  Result of the GetEnvironmentBlueprintConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironmentBlueprintConfiguration
  
  default GetEnvironmentBlueprintConfigurationResponse getEnvironmentBlueprintConfiguration(Consumer<GetEnvironmentBlueprintConfigurationRequest.Builder> getEnvironmentBlueprintConfigurationRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the blueprint configuration in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetEnvironmentBlueprintConfigurationRequest.Builder avoiding the need to create one manually via GetEnvironmentBlueprintConfigurationRequest.builder()
  Parameters:
  
  getEnvironmentBlueprintConfigurationRequest - A Consumer that will call methods on GetEnvironmentBlueprintConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetEnvironmentBlueprintConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironmentProfile
  
  default GetEnvironmentProfileResponse getEnvironmentProfile(GetEnvironmentProfileRequest getEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an evinronment profile in Amazon DataZone.
  Parameters:
  
  getEnvironmentProfileRequest -
  
  Returns:
  
  Result of the GetEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getEnvironmentProfile
  
  default GetEnvironmentProfileResponse getEnvironmentProfile(Consumer<GetEnvironmentProfileRequest.Builder> getEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets an evinronment profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetEnvironmentProfileRequest.Builder avoiding the need to create one manually via GetEnvironmentProfileRequest.builder()
  Parameters:
  
  getEnvironmentProfileRequest - A Consumer that will call methods on GetEnvironmentProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getFormType
  
  default GetFormTypeResponse getFormType(GetFormTypeRequest getFormTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a metadata form type in Amazon DataZone.
  Parameters:
  
  getFormTypeRequest -
  
  Returns:
  
  Result of the GetFormType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getFormType
  
  default GetFormTypeResponse getFormType(Consumer<GetFormTypeRequest.Builder> getFormTypeRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a metadata form type in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetFormTypeRequest.Builder avoiding the need to create one manually via GetFormTypeRequest.builder()
  Parameters:
  
  getFormTypeRequest - A Consumer that will call methods on GetFormTypeRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetFormType operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getGlossary
  
  default GetGlossaryResponse getGlossary(GetGlossaryRequest getGlossaryRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a business glossary in Amazon DataZone.
  Parameters:
  
  getGlossaryRequest -
  
  Returns:
  
  Result of the GetGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getGlossary
  
  default GetGlossaryResponse getGlossary(Consumer<GetGlossaryRequest.Builder> getGlossaryRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a business glossary in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetGlossaryRequest.Builder avoiding the need to create one manually via GetGlossaryRequest.builder()
  Parameters:
  
  getGlossaryRequest - A Consumer that will call methods on GetGlossaryRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getGlossaryTerm
  
  default GetGlossaryTermResponse getGlossaryTerm(GetGlossaryTermRequest getGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a business glossary term in Amazon DataZone.
  Parameters:
  
  getGlossaryTermRequest -
  
  Returns:
  
  Result of the GetGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getGlossaryTerm
  
  default GetGlossaryTermResponse getGlossaryTerm(Consumer<GetGlossaryTermRequest.Builder> getGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a business glossary term in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetGlossaryTermRequest.Builder avoiding the need to create one manually via GetGlossaryTermRequest.builder()
  Parameters:
  
  getGlossaryTermRequest - A Consumer that will call methods on GetGlossaryTermRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getGroupProfile
  
  default GetGroupProfileResponse getGroupProfile(GetGroupProfileRequest getGroupProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a group profile in Amazon DataZone.
  Parameters:
  
  getGroupProfileRequest -
  
  Returns:
  
  Result of the GetGroupProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getGroupProfile
  
  default GetGroupProfileResponse getGroupProfile(Consumer<GetGroupProfileRequest.Builder> getGroupProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a group profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetGroupProfileRequest.Builder avoiding the need to create one manually via GetGroupProfileRequest.builder()
  Parameters:
  
  getGroupProfileRequest - A Consumer that will call methods on GetGroupProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetGroupProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getIamPortalLoginUrl
  
  default GetIamPortalLoginUrlResponse getIamPortalLoginUrl(GetIamPortalLoginUrlRequest getIamPortalLoginUrlRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the data portal URL for the specified Amazon DataZone domain.
  Parameters:
  
  getIamPortalLoginUrlRequest -
  
  Returns:
  
  Result of the GetIamPortalLoginUrl operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getIamPortalLoginUrl
  
  default GetIamPortalLoginUrlResponse getIamPortalLoginUrl(Consumer<GetIamPortalLoginUrlRequest.Builder> getIamPortalLoginUrlRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the data portal URL for the specified Amazon DataZone domain.
  
  This is a convenience which creates an instance of the GetIamPortalLoginUrlRequest.Builder avoiding the need to create one manually via GetIamPortalLoginUrlRequest.builder()
  Parameters:
  
  getIamPortalLoginUrlRequest - A Consumer that will call methods on GetIamPortalLoginUrlRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetIamPortalLoginUrl operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getListing
  
  default GetListingResponse getListing(GetListingRequest getListingRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a listing (a record of an asset at a given time).
  Parameters:
  
  getListingRequest -
  
  Returns:
  
  Result of the GetListing operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getListing
  
  default GetListingResponse getListing(Consumer<GetListingRequest.Builder> getListingRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a listing (a record of an asset at a given time).
  
  This is a convenience which creates an instance of the GetListingRequest.Builder avoiding the need to create one manually via GetListingRequest.builder()
  Parameters:
  
  getListingRequest - A Consumer that will call methods on GetListingRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetListing operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getMetadataGenerationRun
  
  default GetMetadataGenerationRunResponse getMetadataGenerationRun(GetMetadataGenerationRunRequest getMetadataGenerationRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a metadata generation run in Amazon DataZone.
  Parameters:
  
  getMetadataGenerationRunRequest -
  
  Returns:
  
  Result of the GetMetadataGenerationRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getMetadataGenerationRun
  
  default GetMetadataGenerationRunResponse getMetadataGenerationRun(Consumer<GetMetadataGenerationRunRequest.Builder> getMetadataGenerationRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a metadata generation run in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetMetadataGenerationRunRequest.Builder avoiding the need to create one manually via GetMetadataGenerationRunRequest.builder()
  Parameters:
  
  getMetadataGenerationRunRequest - A Consumer that will call methods on GetMetadataGenerationRunRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetMetadataGenerationRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getProject
  
  default GetProjectResponse getProject(GetProjectRequest getProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a project in Amazon DataZone.
  Parameters:
  
  getProjectRequest -
  
  Returns:
  
  Result of the GetProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getProject
  
  default GetProjectResponse getProject(Consumer<GetProjectRequest.Builder> getProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a project in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetProjectRequest.Builder avoiding the need to create one manually via GetProjectRequest.builder()
  Parameters:
  
  getProjectRequest - A Consumer that will call methods on GetProjectRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscription
  
  default GetSubscriptionResponse getSubscription(GetSubscriptionRequest getSubscriptionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a subscription in Amazon DataZone.
  Parameters:
  
  getSubscriptionRequest -
  
  Returns:
  
  Result of the GetSubscription operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscription
  
  default GetSubscriptionResponse getSubscription(Consumer<GetSubscriptionRequest.Builder> getSubscriptionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a subscription in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetSubscriptionRequest.Builder avoiding the need to create one manually via GetSubscriptionRequest.builder()
  Parameters:
  
  getSubscriptionRequest - A Consumer that will call methods on GetSubscriptionRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetSubscription operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscriptionGrant
  
  default GetSubscriptionGrantResponse getSubscriptionGrant(GetSubscriptionGrantRequest getSubscriptionGrantRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the subscription grant in Amazon DataZone.
  Parameters:
  
  getSubscriptionGrantRequest -
  
  Returns:
  
  Result of the GetSubscriptionGrant operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscriptionGrant
  
  default GetSubscriptionGrantResponse getSubscriptionGrant(Consumer<GetSubscriptionGrantRequest.Builder> getSubscriptionGrantRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the subscription grant in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetSubscriptionGrantRequest.Builder avoiding the need to create one manually via GetSubscriptionGrantRequest.builder()
  Parameters:
  
  getSubscriptionGrantRequest - A Consumer that will call methods on GetSubscriptionGrantRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetSubscriptionGrant operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscriptionRequestDetails
  
  default GetSubscriptionRequestDetailsResponse getSubscriptionRequestDetails(GetSubscriptionRequestDetailsRequest getSubscriptionRequestDetailsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the details of the specified subscription request.
  Parameters:
  
  getSubscriptionRequestDetailsRequest -
  
  Returns:
  
  Result of the GetSubscriptionRequestDetails operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscriptionRequestDetails
  
  default GetSubscriptionRequestDetailsResponse getSubscriptionRequestDetails(Consumer<GetSubscriptionRequestDetailsRequest.Builder> getSubscriptionRequestDetailsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the details of the specified subscription request.
  
  This is a convenience which creates an instance of the GetSubscriptionRequestDetailsRequest.Builder avoiding the need to create one manually via GetSubscriptionRequestDetailsRequest.builder()
  Parameters:
  
  getSubscriptionRequestDetailsRequest - A Consumer that will call methods on GetSubscriptionRequestDetailsRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetSubscriptionRequestDetails operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscriptionTarget
  
  default GetSubscriptionTargetResponse getSubscriptionTarget(GetSubscriptionTargetRequest getSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the subscription target in Amazon DataZone.
  Parameters:
  
  getSubscriptionTargetRequest -
  
  Returns:
  
  Result of the GetSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getSubscriptionTarget
  
  default GetSubscriptionTargetResponse getSubscriptionTarget(Consumer<GetSubscriptionTargetRequest.Builder> getSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the subscription target in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetSubscriptionTargetRequest.Builder avoiding the need to create one manually via GetSubscriptionTargetRequest.builder()
  Parameters:
  
  getSubscriptionTargetRequest - A Consumer that will call methods on GetSubscriptionTargetRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getTimeSeriesDataPoint
  
  default GetTimeSeriesDataPointResponse getTimeSeriesDataPoint(GetTimeSeriesDataPointRequest getTimeSeriesDataPointRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the existing data point for the asset.
  Parameters:
  
  getTimeSeriesDataPointRequest -
  
  Returns:
  
  Result of the GetTimeSeriesDataPoint operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getTimeSeriesDataPoint
  
  default GetTimeSeriesDataPointResponse getTimeSeriesDataPoint(Consumer<GetTimeSeriesDataPointRequest.Builder> getTimeSeriesDataPointRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets the existing data point for the asset.
  
  This is a convenience which creates an instance of the GetTimeSeriesDataPointRequest.Builder avoiding the need to create one manually via GetTimeSeriesDataPointRequest.builder()
  Parameters:
  
  getTimeSeriesDataPointRequest - A Consumer that will call methods on GetTimeSeriesDataPointRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetTimeSeriesDataPoint operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getUserProfile
  
  default GetUserProfileResponse getUserProfile(GetUserProfileRequest getUserProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a user profile in Amazon DataZone.
  Parameters:
  
  getUserProfileRequest -
  
  Returns:
  
  Result of the GetUserProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getUserProfile
  
  default GetUserProfileResponse getUserProfile(Consumer<GetUserProfileRequest.Builder> getUserProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Gets a user profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the GetUserProfileRequest.Builder avoiding the need to create one manually via GetUserProfileRequest.builder()
  Parameters:
  
  getUserProfileRequest - A Consumer that will call methods on GetUserProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetUserProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAssetRevisions
  
  default ListAssetRevisionsResponse listAssetRevisions(ListAssetRevisionsRequest listAssetRevisionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists the revisions for the asset.
  Parameters:
  
  listAssetRevisionsRequest -
  
  Returns:
  
  Result of the ListAssetRevisions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAssetRevisions
  
  default ListAssetRevisionsResponse listAssetRevisions(Consumer<ListAssetRevisionsRequest.Builder> listAssetRevisionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists the revisions for the asset.
  
  This is a convenience which creates an instance of the ListAssetRevisionsRequest.Builder avoiding the need to create one manually via ListAssetRevisionsRequest.builder()
  Parameters:
  
  listAssetRevisionsRequest - A Consumer that will call methods on ListAssetRevisionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListAssetRevisions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAssetRevisionsPaginator
  
  default ListAssetRevisionsIterable listAssetRevisionsPaginator(ListAssetRevisionsRequest listAssetRevisionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listAssetRevisions(software.amazon.awssdk.services.datazone.model.ListAssetRevisionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListAssetRevisionsIterable responses = client.listAssetRevisionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListAssetRevisionsIterable responses = client .listAssetRevisionsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListAssetRevisionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListAssetRevisionsIterable responses = client.listAssetRevisionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAssetRevisions(software.amazon.awssdk.services.datazone.model.ListAssetRevisionsRequest) operation.
  Parameters:
  
  listAssetRevisionsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listAssetRevisionsPaginator
  
  default ListAssetRevisionsIterable listAssetRevisionsPaginator(Consumer<ListAssetRevisionsRequest.Builder> listAssetRevisionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listAssetRevisions(software.amazon.awssdk.services.datazone.model.ListAssetRevisionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListAssetRevisionsIterable responses = client.listAssetRevisionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListAssetRevisionsIterable responses = client .listAssetRevisionsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListAssetRevisionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListAssetRevisionsIterable responses = client.listAssetRevisionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAssetRevisions(software.amazon.awssdk.services.datazone.model.ListAssetRevisionsRequest) operation.
  
  This is a convenience which creates an instance of the ListAssetRevisionsRequest.Builder avoiding the need to create one manually via ListAssetRevisionsRequest.builder()
  Parameters:
  
  listAssetRevisionsRequest - A Consumer that will call methods on ListAssetRevisionsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRunActivities
  
  default ListDataSourceRunActivitiesResponse listDataSourceRunActivities(ListDataSourceRunActivitiesRequest listDataSourceRunActivitiesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists data source run activities.
  Parameters:
  
  listDataSourceRunActivitiesRequest -
  
  Returns:
  
  Result of the ListDataSourceRunActivities operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRunActivities
  
  default ListDataSourceRunActivitiesResponse listDataSourceRunActivities(Consumer<ListDataSourceRunActivitiesRequest.Builder> listDataSourceRunActivitiesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists data source run activities.
  
  This is a convenience which creates an instance of the ListDataSourceRunActivitiesRequest.Builder avoiding the need to create one manually via ListDataSourceRunActivitiesRequest.builder()
  Parameters:
  
  listDataSourceRunActivitiesRequest - A Consumer that will call methods on ListDataSourceRunActivitiesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListDataSourceRunActivities operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRunActivitiesPaginator
  
  default ListDataSourceRunActivitiesIterable listDataSourceRunActivitiesPaginator(ListDataSourceRunActivitiesRequest listDataSourceRunActivitiesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDataSourceRunActivities(software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunActivitiesIterable responses = client.listDataSourceRunActivitiesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunActivitiesIterable responses = client .listDataSourceRunActivitiesPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunActivitiesIterable responses = client.listDataSourceRunActivitiesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDataSourceRunActivities(software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesRequest) operation.
  Parameters:
  
  listDataSourceRunActivitiesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRunActivitiesPaginator
  
  default ListDataSourceRunActivitiesIterable listDataSourceRunActivitiesPaginator(Consumer<ListDataSourceRunActivitiesRequest.Builder> listDataSourceRunActivitiesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDataSourceRunActivities(software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunActivitiesIterable responses = client.listDataSourceRunActivitiesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunActivitiesIterable responses = client .listDataSourceRunActivitiesPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunActivitiesIterable responses = client.listDataSourceRunActivitiesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDataSourceRunActivities(software.amazon.awssdk.services.datazone.model.ListDataSourceRunActivitiesRequest) operation.
  
  This is a convenience which creates an instance of the ListDataSourceRunActivitiesRequest.Builder avoiding the need to create one manually via ListDataSourceRunActivitiesRequest.builder()
  Parameters:
  
  listDataSourceRunActivitiesRequest - A Consumer that will call methods on ListDataSourceRunActivitiesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRuns
  
  default ListDataSourceRunsResponse listDataSourceRuns(ListDataSourceRunsRequest listDataSourceRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists data source runs in Amazon DataZone.
  Parameters:
  
  listDataSourceRunsRequest -
  
  Returns:
  
  Result of the ListDataSourceRuns operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRuns
  
  default ListDataSourceRunsResponse listDataSourceRuns(Consumer<ListDataSourceRunsRequest.Builder> listDataSourceRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists data source runs in Amazon DataZone.
  
  This is a convenience which creates an instance of the ListDataSourceRunsRequest.Builder avoiding the need to create one manually via ListDataSourceRunsRequest.builder()
  Parameters:
  
  listDataSourceRunsRequest - A Consumer that will call methods on ListDataSourceRunsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListDataSourceRuns operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRunsPaginator
  
  default ListDataSourceRunsIterable listDataSourceRunsPaginator(ListDataSourceRunsRequest listDataSourceRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDataSourceRuns(software.amazon.awssdk.services.datazone.model.ListDataSourceRunsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunsIterable responses = client.listDataSourceRunsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunsIterable responses = client .listDataSourceRunsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDataSourceRunsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunsIterable responses = client.listDataSourceRunsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDataSourceRuns(software.amazon.awssdk.services.datazone.model.ListDataSourceRunsRequest) operation.
  Parameters:
  
  listDataSourceRunsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDataSourceRunsPaginator
  
  default ListDataSourceRunsIterable listDataSourceRunsPaginator(Consumer<ListDataSourceRunsRequest.Builder> listDataSourceRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDataSourceRuns(software.amazon.awssdk.services.datazone.model.ListDataSourceRunsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunsIterable responses = client.listDataSourceRunsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunsIterable responses = client .listDataSourceRunsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDataSourceRunsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDataSourceRunsIterable responses = client.listDataSourceRunsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDataSourceRuns(software.amazon.awssdk.services.datazone.model.ListDataSourceRunsRequest) operation.
  
  This is a convenience which creates an instance of the ListDataSourceRunsRequest.Builder avoiding the need to create one manually via ListDataSourceRunsRequest.builder()
  Parameters:
  
  listDataSourceRunsRequest - A Consumer that will call methods on ListDataSourceRunsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDataSources
  
  default ListDataSourcesResponse listDataSources(ListDataSourcesRequest listDataSourcesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists data sources in Amazon DataZone.
  Parameters:
  
  listDataSourcesRequest -
  
  Returns:
  
  Result of the ListDataSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDataSources
  
  default ListDataSourcesResponse listDataSources(Consumer<ListDataSourcesRequest.Builder> listDataSourcesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists data sources in Amazon DataZone.
  
  This is a convenience which creates an instance of the ListDataSourcesRequest.Builder avoiding the need to create one manually via ListDataSourcesRequest.builder()
  Parameters:
  
  listDataSourcesRequest - A Consumer that will call methods on ListDataSourcesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListDataSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDataSourcesPaginator
  
  default ListDataSourcesIterable listDataSourcesPaginator(ListDataSourcesRequest listDataSourcesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDataSources(software.amazon.awssdk.services.datazone.model.ListDataSourcesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDataSourcesIterable responses = client.listDataSourcesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDataSourcesIterable responses = client .listDataSourcesPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDataSourcesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDataSourcesIterable responses = client.listDataSourcesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDataSources(software.amazon.awssdk.services.datazone.model.ListDataSourcesRequest) operation.
  Parameters:
  
  listDataSourcesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDataSourcesPaginator
  
  default ListDataSourcesIterable listDataSourcesPaginator(Consumer<ListDataSourcesRequest.Builder> listDataSourcesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDataSources(software.amazon.awssdk.services.datazone.model.ListDataSourcesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDataSourcesIterable responses = client.listDataSourcesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDataSourcesIterable responses = client .listDataSourcesPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDataSourcesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDataSourcesIterable responses = client.listDataSourcesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDataSources(software.amazon.awssdk.services.datazone.model.ListDataSourcesRequest) operation.
  
  This is a convenience which creates an instance of the ListDataSourcesRequest.Builder avoiding the need to create one manually via ListDataSourcesRequest.builder()
  Parameters:
  
  listDataSourcesRequest - A Consumer that will call methods on ListDataSourcesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDomains
  
  default ListDomainsResponse listDomains(ListDomainsRequest listDomainsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone domains.
  Parameters:
  
  listDomainsRequest -
  
  Returns:
  
  Result of the ListDomains operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDomains
  
  default ListDomainsResponse listDomains(Consumer<ListDomainsRequest.Builder> listDomainsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone domains.
  
  This is a convenience which creates an instance of the ListDomainsRequest.Builder avoiding the need to create one manually via ListDomainsRequest.builder()
  Parameters:
  
  listDomainsRequest - A Consumer that will call methods on ListDomainsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListDomains operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listDomainsPaginator
  
  default ListDomainsIterable listDomainsPaginator(ListDomainsRequest listDomainsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDomains(software.amazon.awssdk.services.datazone.model.ListDomainsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDomainsIterable responses = client.listDomainsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDomainsIterable responses = client.listDomainsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDomainsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDomainsIterable responses = client.listDomainsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDomains(software.amazon.awssdk.services.datazone.model.ListDomainsRequest) operation.
  Parameters:
  
  listDomainsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listDomainsPaginator
  
  default ListDomainsIterable listDomainsPaginator(Consumer<ListDomainsRequest.Builder> listDomainsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listDomains(software.amazon.awssdk.services.datazone.model.ListDomainsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListDomainsIterable responses = client.listDomainsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListDomainsIterable responses = client.listDomainsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListDomainsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListDomainsIterable responses = client.listDomainsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listDomains(software.amazon.awssdk.services.datazone.model.ListDomainsRequest) operation.
  
  This is a convenience which creates an instance of the ListDomainsRequest.Builder avoiding the need to create one manually via ListDomainsRequest.builder()
  Parameters:
  
  listDomainsRequest - A Consumer that will call methods on ListDomainsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprintConfigurations
  
  default ListEnvironmentBlueprintConfigurationsResponse listEnvironmentBlueprintConfigurations(ListEnvironmentBlueprintConfigurationsRequest listEnvironmentBlueprintConfigurationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists blueprint configurations for a Amazon DataZone environment.
  Parameters:
  
  listEnvironmentBlueprintConfigurationsRequest -
  
  Returns:
  
  Result of the ListEnvironmentBlueprintConfigurations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprintConfigurations
  
  default ListEnvironmentBlueprintConfigurationsResponse listEnvironmentBlueprintConfigurations(Consumer<ListEnvironmentBlueprintConfigurationsRequest.Builder> listEnvironmentBlueprintConfigurationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists blueprint configurations for a Amazon DataZone environment.
  
  This is a convenience which creates an instance of the ListEnvironmentBlueprintConfigurationsRequest.Builder avoiding the need to create one manually via ListEnvironmentBlueprintConfigurationsRequest.builder()
  Parameters:
  
  listEnvironmentBlueprintConfigurationsRequest - A Consumer that will call methods on ListEnvironmentBlueprintConfigurationsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListEnvironmentBlueprintConfigurations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprintConfigurationsPaginator
  
  default ListEnvironmentBlueprintConfigurationsIterable listEnvironmentBlueprintConfigurationsPaginator(ListEnvironmentBlueprintConfigurationsRequest listEnvironmentBlueprintConfigurationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironmentBlueprintConfigurations(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintConfigurationsIterable responses = client.listEnvironmentBlueprintConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintConfigurationsIterable responses = client .listEnvironmentBlueprintConfigurationsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintConfigurationsIterable responses = client.listEnvironmentBlueprintConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironmentBlueprintConfigurations(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsRequest) operation.
  Parameters:
  
  listEnvironmentBlueprintConfigurationsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprintConfigurationsPaginator
  
  default ListEnvironmentBlueprintConfigurationsIterable listEnvironmentBlueprintConfigurationsPaginator(Consumer<ListEnvironmentBlueprintConfigurationsRequest.Builder> listEnvironmentBlueprintConfigurationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironmentBlueprintConfigurations(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintConfigurationsIterable responses = client.listEnvironmentBlueprintConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintConfigurationsIterable responses = client .listEnvironmentBlueprintConfigurationsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintConfigurationsIterable responses = client.listEnvironmentBlueprintConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironmentBlueprintConfigurations(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintConfigurationsRequest) operation.
  
  This is a convenience which creates an instance of the ListEnvironmentBlueprintConfigurationsRequest.Builder avoiding the need to create one manually via ListEnvironmentBlueprintConfigurationsRequest.builder()
  Parameters:
  
  listEnvironmentBlueprintConfigurationsRequest - A Consumer that will call methods on ListEnvironmentBlueprintConfigurationsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprints
  
  default ListEnvironmentBlueprintsResponse listEnvironmentBlueprints(ListEnvironmentBlueprintsRequest listEnvironmentBlueprintsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists blueprints in an Amazon DataZone environment.
  Parameters:
  
  listEnvironmentBlueprintsRequest -
  
  Returns:
  
  Result of the ListEnvironmentBlueprints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprints
  
  default ListEnvironmentBlueprintsResponse listEnvironmentBlueprints(Consumer<ListEnvironmentBlueprintsRequest.Builder> listEnvironmentBlueprintsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists blueprints in an Amazon DataZone environment.
  
  This is a convenience which creates an instance of the ListEnvironmentBlueprintsRequest.Builder avoiding the need to create one manually via ListEnvironmentBlueprintsRequest.builder()
  Parameters:
  
  listEnvironmentBlueprintsRequest - A Consumer that will call methods on ListEnvironmentBlueprintsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListEnvironmentBlueprints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprintsPaginator
  
  default ListEnvironmentBlueprintsIterable listEnvironmentBlueprintsPaginator(ListEnvironmentBlueprintsRequest listEnvironmentBlueprintsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironmentBlueprints(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintsIterable responses = client.listEnvironmentBlueprintsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintsIterable responses = client .listEnvironmentBlueprintsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintsIterable responses = client.listEnvironmentBlueprintsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironmentBlueprints(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsRequest) operation.
  Parameters:
  
  listEnvironmentBlueprintsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentBlueprintsPaginator
  
  default ListEnvironmentBlueprintsIterable listEnvironmentBlueprintsPaginator(Consumer<ListEnvironmentBlueprintsRequest.Builder> listEnvironmentBlueprintsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironmentBlueprints(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintsIterable responses = client.listEnvironmentBlueprintsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintsIterable responses = client .listEnvironmentBlueprintsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentBlueprintsIterable responses = client.listEnvironmentBlueprintsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironmentBlueprints(software.amazon.awssdk.services.datazone.model.ListEnvironmentBlueprintsRequest) operation.
  
  This is a convenience which creates an instance of the ListEnvironmentBlueprintsRequest.Builder avoiding the need to create one manually via ListEnvironmentBlueprintsRequest.builder()
  Parameters:
  
  listEnvironmentBlueprintsRequest - A Consumer that will call methods on ListEnvironmentBlueprintsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentProfiles
  
  default ListEnvironmentProfilesResponse listEnvironmentProfiles(ListEnvironmentProfilesRequest listEnvironmentProfilesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone environment profiles.
  Parameters:
  
  listEnvironmentProfilesRequest -
  
  Returns:
  
  Result of the ListEnvironmentProfiles operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentProfiles
  
  default ListEnvironmentProfilesResponse listEnvironmentProfiles(Consumer<ListEnvironmentProfilesRequest.Builder> listEnvironmentProfilesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone environment profiles.
  
  This is a convenience which creates an instance of the ListEnvironmentProfilesRequest.Builder avoiding the need to create one manually via ListEnvironmentProfilesRequest.builder()
  Parameters:
  
  listEnvironmentProfilesRequest - A Consumer that will call methods on ListEnvironmentProfilesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListEnvironmentProfiles operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentProfilesPaginator
  
  default ListEnvironmentProfilesIterable listEnvironmentProfilesPaginator(ListEnvironmentProfilesRequest listEnvironmentProfilesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironmentProfiles(software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentProfilesIterable responses = client.listEnvironmentProfilesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentProfilesIterable responses = client .listEnvironmentProfilesPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentProfilesIterable responses = client.listEnvironmentProfilesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironmentProfiles(software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesRequest) operation.
  Parameters:
  
  listEnvironmentProfilesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentProfilesPaginator
  
  default ListEnvironmentProfilesIterable listEnvironmentProfilesPaginator(Consumer<ListEnvironmentProfilesRequest.Builder> listEnvironmentProfilesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironmentProfiles(software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentProfilesIterable responses = client.listEnvironmentProfilesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentProfilesIterable responses = client .listEnvironmentProfilesPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentProfilesIterable responses = client.listEnvironmentProfilesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironmentProfiles(software.amazon.awssdk.services.datazone.model.ListEnvironmentProfilesRequest) operation.
  
  This is a convenience which creates an instance of the ListEnvironmentProfilesRequest.Builder avoiding the need to create one manually via ListEnvironmentProfilesRequest.builder()
  Parameters:
  
  listEnvironmentProfilesRequest - A Consumer that will call methods on ListEnvironmentProfilesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironments
  
  default ListEnvironmentsResponse listEnvironments(ListEnvironmentsRequest listEnvironmentsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone environments.
  Parameters:
  
  listEnvironmentsRequest -
  
  Returns:
  
  Result of the ListEnvironments operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironments
  
  default ListEnvironmentsResponse listEnvironments(Consumer<ListEnvironmentsRequest.Builder> listEnvironmentsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone environments.
  
  This is a convenience which creates an instance of the ListEnvironmentsRequest.Builder avoiding the need to create one manually via ListEnvironmentsRequest.builder()
  Parameters:
  
  listEnvironmentsRequest - A Consumer that will call methods on ListEnvironmentsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListEnvironments operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentsPaginator
  
  default ListEnvironmentsIterable listEnvironmentsPaginator(ListEnvironmentsRequest listEnvironmentsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironments(software.amazon.awssdk.services.datazone.model.ListEnvironmentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentsIterable responses = client.listEnvironmentsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentsIterable responses = client .listEnvironmentsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentsIterable responses = client.listEnvironmentsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironments(software.amazon.awssdk.services.datazone.model.ListEnvironmentsRequest) operation.
  Parameters:
  
  listEnvironmentsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listEnvironmentsPaginator
  
  default ListEnvironmentsIterable listEnvironmentsPaginator(Consumer<ListEnvironmentsRequest.Builder> listEnvironmentsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listEnvironments(software.amazon.awssdk.services.datazone.model.ListEnvironmentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentsIterable responses = client.listEnvironmentsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListEnvironmentsIterable responses = client .listEnvironmentsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListEnvironmentsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListEnvironmentsIterable responses = client.listEnvironmentsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listEnvironments(software.amazon.awssdk.services.datazone.model.ListEnvironmentsRequest) operation.
  
  This is a convenience which creates an instance of the ListEnvironmentsRequest.Builder avoiding the need to create one manually via ListEnvironmentsRequest.builder()
  Parameters:
  
  listEnvironmentsRequest - A Consumer that will call methods on ListEnvironmentsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listMetadataGenerationRuns
  
  default ListMetadataGenerationRunsResponse listMetadataGenerationRuns(ListMetadataGenerationRunsRequest listMetadataGenerationRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists all metadata generation runs.
  Parameters:
  
  listMetadataGenerationRunsRequest -
  
  Returns:
  
  Result of the ListMetadataGenerationRuns operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listMetadataGenerationRuns
  
  default ListMetadataGenerationRunsResponse listMetadataGenerationRuns(Consumer<ListMetadataGenerationRunsRequest.Builder> listMetadataGenerationRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists all metadata generation runs.
  
  This is a convenience which creates an instance of the ListMetadataGenerationRunsRequest.Builder avoiding the need to create one manually via ListMetadataGenerationRunsRequest.builder()
  Parameters:
  
  listMetadataGenerationRunsRequest - A Consumer that will call methods on ListMetadataGenerationRunsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListMetadataGenerationRuns operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listMetadataGenerationRunsPaginator
  
  default ListMetadataGenerationRunsIterable listMetadataGenerationRunsPaginator(ListMetadataGenerationRunsRequest listMetadataGenerationRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listMetadataGenerationRuns(software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListMetadataGenerationRunsIterable responses = client.listMetadataGenerationRunsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListMetadataGenerationRunsIterable responses = client .listMetadataGenerationRunsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListMetadataGenerationRunsIterable responses = client.listMetadataGenerationRunsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listMetadataGenerationRuns(software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsRequest) operation.
  Parameters:
  
  listMetadataGenerationRunsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listMetadataGenerationRunsPaginator
  
  default ListMetadataGenerationRunsIterable listMetadataGenerationRunsPaginator(Consumer<ListMetadataGenerationRunsRequest.Builder> listMetadataGenerationRunsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listMetadataGenerationRuns(software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListMetadataGenerationRunsIterable responses = client.listMetadataGenerationRunsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListMetadataGenerationRunsIterable responses = client .listMetadataGenerationRunsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListMetadataGenerationRunsIterable responses = client.listMetadataGenerationRunsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listMetadataGenerationRuns(software.amazon.awssdk.services.datazone.model.ListMetadataGenerationRunsRequest) operation.
  
  This is a convenience which creates an instance of the ListMetadataGenerationRunsRequest.Builder avoiding the need to create one manually via ListMetadataGenerationRunsRequest.builder()
  Parameters:
  
  listMetadataGenerationRunsRequest - A Consumer that will call methods on ListMetadataGenerationRunsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listNotifications
  
  default ListNotificationsResponse listNotifications(ListNotificationsRequest listNotificationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists all Amazon DataZone notifications.
  Parameters:
  
  listNotificationsRequest -
  
  Returns:
  
  Result of the ListNotifications operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listNotifications
  
  default ListNotificationsResponse listNotifications(Consumer<ListNotificationsRequest.Builder> listNotificationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists all Amazon DataZone notifications.
  
  This is a convenience which creates an instance of the ListNotificationsRequest.Builder avoiding the need to create one manually via ListNotificationsRequest.builder()
  Parameters:
  
  listNotificationsRequest - A Consumer that will call methods on ListNotificationsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListNotifications operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listNotificationsPaginator
  
  default ListNotificationsIterable listNotificationsPaginator(ListNotificationsRequest listNotificationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listNotifications(software.amazon.awssdk.services.datazone.model.ListNotificationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListNotificationsIterable responses = client.listNotificationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListNotificationsIterable responses = client .listNotificationsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListNotificationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListNotificationsIterable responses = client.listNotificationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listNotifications(software.amazon.awssdk.services.datazone.model.ListNotificationsRequest) operation.
  Parameters:
  
  listNotificationsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listNotificationsPaginator
  
  default ListNotificationsIterable listNotificationsPaginator(Consumer<ListNotificationsRequest.Builder> listNotificationsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listNotifications(software.amazon.awssdk.services.datazone.model.ListNotificationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListNotificationsIterable responses = client.listNotificationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListNotificationsIterable responses = client .listNotificationsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListNotificationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListNotificationsIterable responses = client.listNotificationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listNotifications(software.amazon.awssdk.services.datazone.model.ListNotificationsRequest) operation.
  
  This is a convenience which creates an instance of the ListNotificationsRequest.Builder avoiding the need to create one manually via ListNotificationsRequest.builder()
  Parameters:
  
  listNotificationsRequest - A Consumer that will call methods on ListNotificationsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listProjectMemberships
  
  default ListProjectMembershipsResponse listProjectMemberships(ListProjectMembershipsRequest listProjectMembershipsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists all members of the specified project.
  Parameters:
  
  listProjectMembershipsRequest -
  
  Returns:
  
  Result of the ListProjectMemberships operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listProjectMemberships
  
  default ListProjectMembershipsResponse listProjectMemberships(Consumer<ListProjectMembershipsRequest.Builder> listProjectMembershipsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists all members of the specified project.
  
  This is a convenience which creates an instance of the ListProjectMembershipsRequest.Builder avoiding the need to create one manually via ListProjectMembershipsRequest.builder()
  Parameters:
  
  listProjectMembershipsRequest - A Consumer that will call methods on ListProjectMembershipsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListProjectMemberships operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listProjectMembershipsPaginator
  
  default ListProjectMembershipsIterable listProjectMembershipsPaginator(ListProjectMembershipsRequest listProjectMembershipsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listProjectMemberships(software.amazon.awssdk.services.datazone.model.ListProjectMembershipsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListProjectMembershipsIterable responses = client.listProjectMembershipsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListProjectMembershipsIterable responses = client .listProjectMembershipsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListProjectMembershipsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListProjectMembershipsIterable responses = client.listProjectMembershipsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listProjectMemberships(software.amazon.awssdk.services.datazone.model.ListProjectMembershipsRequest) operation.
  Parameters:
  
  listProjectMembershipsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listProjectMembershipsPaginator
  
  default ListProjectMembershipsIterable listProjectMembershipsPaginator(Consumer<ListProjectMembershipsRequest.Builder> listProjectMembershipsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listProjectMemberships(software.amazon.awssdk.services.datazone.model.ListProjectMembershipsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListProjectMembershipsIterable responses = client.listProjectMembershipsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListProjectMembershipsIterable responses = client .listProjectMembershipsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListProjectMembershipsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListProjectMembershipsIterable responses = client.listProjectMembershipsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listProjectMemberships(software.amazon.awssdk.services.datazone.model.ListProjectMembershipsRequest) operation.
  
  This is a convenience which creates an instance of the ListProjectMembershipsRequest.Builder avoiding the need to create one manually via ListProjectMembershipsRequest.builder()
  Parameters:
  
  listProjectMembershipsRequest - A Consumer that will call methods on ListProjectMembershipsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listProjects
  
  default ListProjectsResponse listProjects(ListProjectsRequest listProjectsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone projects.
  Parameters:
  
  listProjectsRequest -
  
  Returns:
  
  Result of the ListProjects operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listProjects
  
  default ListProjectsResponse listProjects(Consumer<ListProjectsRequest.Builder> listProjectsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone projects.
  
  This is a convenience which creates an instance of the ListProjectsRequest.Builder avoiding the need to create one manually via ListProjectsRequest.builder()
  Parameters:
  
  listProjectsRequest - A Consumer that will call methods on ListProjectsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListProjects operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listProjectsPaginator
  
  default ListProjectsIterable listProjectsPaginator(ListProjectsRequest listProjectsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listProjects(software.amazon.awssdk.services.datazone.model.ListProjectsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListProjectsIterable responses = client.listProjectsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListProjectsIterable responses = client.listProjectsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListProjectsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListProjectsIterable responses = client.listProjectsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listProjects(software.amazon.awssdk.services.datazone.model.ListProjectsRequest) operation.
  Parameters:
  
  listProjectsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listProjectsPaginator
  
  default ListProjectsIterable listProjectsPaginator(Consumer<ListProjectsRequest.Builder> listProjectsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listProjects(software.amazon.awssdk.services.datazone.model.ListProjectsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListProjectsIterable responses = client.listProjectsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListProjectsIterable responses = client.listProjectsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListProjectsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListProjectsIterable responses = client.listProjectsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listProjects(software.amazon.awssdk.services.datazone.model.ListProjectsRequest) operation.
  
  This is a convenience which creates an instance of the ListProjectsRequest.Builder avoiding the need to create one manually via ListProjectsRequest.builder()
  Parameters:
  
  listProjectsRequest - A Consumer that will call methods on ListProjectsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionGrants
  
  default ListSubscriptionGrantsResponse listSubscriptionGrants(ListSubscriptionGrantsRequest listSubscriptionGrantsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists subscription grants.
  Parameters:
  
  listSubscriptionGrantsRequest -
  
  Returns:
  
  Result of the ListSubscriptionGrants operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionGrants
  
  default ListSubscriptionGrantsResponse listSubscriptionGrants(Consumer<ListSubscriptionGrantsRequest.Builder> listSubscriptionGrantsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists subscription grants.
  
  This is a convenience which creates an instance of the ListSubscriptionGrantsRequest.Builder avoiding the need to create one manually via ListSubscriptionGrantsRequest.builder()
  Parameters:
  
  listSubscriptionGrantsRequest - A Consumer that will call methods on ListSubscriptionGrantsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListSubscriptionGrants operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionGrantsPaginator
  
  default ListSubscriptionGrantsIterable listSubscriptionGrantsPaginator(ListSubscriptionGrantsRequest listSubscriptionGrantsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptionGrants(software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionGrantsIterable responses = client.listSubscriptionGrantsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionGrantsIterable responses = client .listSubscriptionGrantsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionGrantsIterable responses = client.listSubscriptionGrantsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptionGrants(software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsRequest) operation.
  Parameters:
  
  listSubscriptionGrantsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionGrantsPaginator
  
  default ListSubscriptionGrantsIterable listSubscriptionGrantsPaginator(Consumer<ListSubscriptionGrantsRequest.Builder> listSubscriptionGrantsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptionGrants(software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionGrantsIterable responses = client.listSubscriptionGrantsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionGrantsIterable responses = client .listSubscriptionGrantsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionGrantsIterable responses = client.listSubscriptionGrantsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptionGrants(software.amazon.awssdk.services.datazone.model.ListSubscriptionGrantsRequest) operation.
  
  This is a convenience which creates an instance of the ListSubscriptionGrantsRequest.Builder avoiding the need to create one manually via ListSubscriptionGrantsRequest.builder()
  Parameters:
  
  listSubscriptionGrantsRequest - A Consumer that will call methods on ListSubscriptionGrantsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionRequests
  
  default ListSubscriptionRequestsResponse listSubscriptionRequests(ListSubscriptionRequestsRequest listSubscriptionRequestsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone subscription requests.
  Parameters:
  
  listSubscriptionRequestsRequest -
  
  Returns:
  
  Result of the ListSubscriptionRequests operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionRequests
  
  default ListSubscriptionRequestsResponse listSubscriptionRequests(Consumer<ListSubscriptionRequestsRequest.Builder> listSubscriptionRequestsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists Amazon DataZone subscription requests.
  
  This is a convenience which creates an instance of the ListSubscriptionRequestsRequest.Builder avoiding the need to create one manually via ListSubscriptionRequestsRequest.builder()
  Parameters:
  
  listSubscriptionRequestsRequest - A Consumer that will call methods on ListSubscriptionRequestsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListSubscriptionRequests operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionRequestsPaginator
  
  default ListSubscriptionRequestsIterable listSubscriptionRequestsPaginator(ListSubscriptionRequestsRequest listSubscriptionRequestsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptionRequests(software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionRequestsIterable responses = client.listSubscriptionRequestsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionRequestsIterable responses = client .listSubscriptionRequestsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionRequestsIterable responses = client.listSubscriptionRequestsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptionRequests(software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsRequest) operation.
  Parameters:
  
  listSubscriptionRequestsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionRequestsPaginator
  
  default ListSubscriptionRequestsIterable listSubscriptionRequestsPaginator(Consumer<ListSubscriptionRequestsRequest.Builder> listSubscriptionRequestsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptionRequests(software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionRequestsIterable responses = client.listSubscriptionRequestsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionRequestsIterable responses = client .listSubscriptionRequestsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionRequestsIterable responses = client.listSubscriptionRequestsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptionRequests(software.amazon.awssdk.services.datazone.model.ListSubscriptionRequestsRequest) operation.
  
  This is a convenience which creates an instance of the ListSubscriptionRequestsRequest.Builder avoiding the need to create one manually via ListSubscriptionRequestsRequest.builder()
  Parameters:
  
  listSubscriptionRequestsRequest - A Consumer that will call methods on ListSubscriptionRequestsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionTargets
  
  default ListSubscriptionTargetsResponse listSubscriptionTargets(ListSubscriptionTargetsRequest listSubscriptionTargetsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists subscription targets in Amazon DataZone.
  Parameters:
  
  listSubscriptionTargetsRequest -
  
  Returns:
  
  Result of the ListSubscriptionTargets operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionTargets
  
  default ListSubscriptionTargetsResponse listSubscriptionTargets(Consumer<ListSubscriptionTargetsRequest.Builder> listSubscriptionTargetsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists subscription targets in Amazon DataZone.
  
  This is a convenience which creates an instance of the ListSubscriptionTargetsRequest.Builder avoiding the need to create one manually via ListSubscriptionTargetsRequest.builder()
  Parameters:
  
  listSubscriptionTargetsRequest - A Consumer that will call methods on ListSubscriptionTargetsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListSubscriptionTargets operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionTargetsPaginator
  
  default ListSubscriptionTargetsIterable listSubscriptionTargetsPaginator(ListSubscriptionTargetsRequest listSubscriptionTargetsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptionTargets(software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionTargetsIterable responses = client.listSubscriptionTargetsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionTargetsIterable responses = client .listSubscriptionTargetsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionTargetsIterable responses = client.listSubscriptionTargetsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptionTargets(software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsRequest) operation.
  Parameters:
  
  listSubscriptionTargetsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionTargetsPaginator
  
  default ListSubscriptionTargetsIterable listSubscriptionTargetsPaginator(Consumer<ListSubscriptionTargetsRequest.Builder> listSubscriptionTargetsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptionTargets(software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionTargetsIterable responses = client.listSubscriptionTargetsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionTargetsIterable responses = client .listSubscriptionTargetsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionTargetsIterable responses = client.listSubscriptionTargetsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptionTargets(software.amazon.awssdk.services.datazone.model.ListSubscriptionTargetsRequest) operation.
  
  This is a convenience which creates an instance of the ListSubscriptionTargetsRequest.Builder avoiding the need to create one manually via ListSubscriptionTargetsRequest.builder()
  Parameters:
  
  listSubscriptionTargetsRequest - A Consumer that will call methods on ListSubscriptionTargetsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptions
  
  default ListSubscriptionsResponse listSubscriptions(ListSubscriptionsRequest listSubscriptionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists subscriptions in Amazon DataZone.
  Parameters:
  
  listSubscriptionsRequest -
  
  Returns:
  
  Result of the ListSubscriptions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptions
  
  default ListSubscriptionsResponse listSubscriptions(Consumer<ListSubscriptionsRequest.Builder> listSubscriptionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists subscriptions in Amazon DataZone.
  
  This is a convenience which creates an instance of the ListSubscriptionsRequest.Builder avoiding the need to create one manually via ListSubscriptionsRequest.builder()
  Parameters:
  
  listSubscriptionsRequest - A Consumer that will call methods on ListSubscriptionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListSubscriptions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionsPaginator
  
  default ListSubscriptionsIterable listSubscriptionsPaginator(ListSubscriptionsRequest listSubscriptionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptions(software.amazon.awssdk.services.datazone.model.ListSubscriptionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionsIterable responses = client.listSubscriptionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionsIterable responses = client .listSubscriptionsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionsIterable responses = client.listSubscriptionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptions(software.amazon.awssdk.services.datazone.model.ListSubscriptionsRequest) operation.
  Parameters:
  
  listSubscriptionsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listSubscriptionsPaginator
  
  default ListSubscriptionsIterable listSubscriptionsPaginator(Consumer<ListSubscriptionsRequest.Builder> listSubscriptionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listSubscriptions(software.amazon.awssdk.services.datazone.model.ListSubscriptionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionsIterable responses = client.listSubscriptionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListSubscriptionsIterable responses = client .listSubscriptionsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListSubscriptionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListSubscriptionsIterable responses = client.listSubscriptionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listSubscriptions(software.amazon.awssdk.services.datazone.model.ListSubscriptionsRequest) operation.
  
  This is a convenience which creates an instance of the ListSubscriptionsRequest.Builder avoiding the need to create one manually via ListSubscriptionsRequest.builder()
  Parameters:
  
  listSubscriptionsRequest - A Consumer that will call methods on ListSubscriptionsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTagsForResource
  
  default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists tags for the specified resource in Amazon DataZone.
  Parameters:
  
  listTagsForResourceRequest -
  
  Returns:
  
  Result of the ListTagsForResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTagsForResource
  
  default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists tags for the specified resource in Amazon DataZone.
  
  This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
  Parameters:
  
  listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListTagsForResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTimeSeriesDataPoints
  
  default ListTimeSeriesDataPointsResponse listTimeSeriesDataPoints(ListTimeSeriesDataPointsRequest listTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists time series data points.
  Parameters:
  
  listTimeSeriesDataPointsRequest -
  
  Returns:
  
  Result of the ListTimeSeriesDataPoints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTimeSeriesDataPoints
  
  default ListTimeSeriesDataPointsResponse listTimeSeriesDataPoints(Consumer<ListTimeSeriesDataPointsRequest.Builder> listTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Lists time series data points.
  
  This is a convenience which creates an instance of the ListTimeSeriesDataPointsRequest.Builder avoiding the need to create one manually via ListTimeSeriesDataPointsRequest.builder()
  Parameters:
  
  listTimeSeriesDataPointsRequest - A Consumer that will call methods on ListTimeSeriesDataPointsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListTimeSeriesDataPoints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTimeSeriesDataPointsPaginator
  
  default ListTimeSeriesDataPointsIterable listTimeSeriesDataPointsPaginator(ListTimeSeriesDataPointsRequest listTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listTimeSeriesDataPoints(software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListTimeSeriesDataPointsIterable responses = client.listTimeSeriesDataPointsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListTimeSeriesDataPointsIterable responses = client .listTimeSeriesDataPointsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListTimeSeriesDataPointsIterable responses = client.listTimeSeriesDataPointsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTimeSeriesDataPoints(software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsRequest) operation.
  Parameters:
  
  listTimeSeriesDataPointsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTimeSeriesDataPointsPaginator
  
  default ListTimeSeriesDataPointsIterable listTimeSeriesDataPointsPaginator(Consumer<ListTimeSeriesDataPointsRequest.Builder> listTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of listTimeSeriesDataPoints(software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.ListTimeSeriesDataPointsIterable responses = client.listTimeSeriesDataPointsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.ListTimeSeriesDataPointsIterable responses = client .listTimeSeriesDataPointsPaginator(request); for (software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.ListTimeSeriesDataPointsIterable responses = client.listTimeSeriesDataPointsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTimeSeriesDataPoints(software.amazon.awssdk.services.datazone.model.ListTimeSeriesDataPointsRequest) operation.
  
  This is a convenience which creates an instance of the ListTimeSeriesDataPointsRequest.Builder avoiding the need to create one manually via ListTimeSeriesDataPointsRequest.builder()
  Parameters:
  
  listTimeSeriesDataPointsRequest - A Consumer that will call methods on ListTimeSeriesDataPointsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- postTimeSeriesDataPoints
  
  default PostTimeSeriesDataPointsResponse postTimeSeriesDataPoints(PostTimeSeriesDataPointsRequest postTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Posts time series data points to Amazon DataZone for the specified asset.
  Parameters:
  
  postTimeSeriesDataPointsRequest -
  
  Returns:
  
  Result of the PostTimeSeriesDataPoints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- postTimeSeriesDataPoints
  
  default PostTimeSeriesDataPointsResponse postTimeSeriesDataPoints(Consumer<PostTimeSeriesDataPointsRequest.Builder> postTimeSeriesDataPointsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Posts time series data points to Amazon DataZone for the specified asset.
  
  This is a convenience which creates an instance of the PostTimeSeriesDataPointsRequest.Builder avoiding the need to create one manually via PostTimeSeriesDataPointsRequest.builder()
  Parameters:
  
  postTimeSeriesDataPointsRequest - A Consumer that will call methods on PostTimeSeriesDataPointsRequest.Builder to create a request.
  
  Returns:
  
  Result of the PostTimeSeriesDataPoints operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putEnvironmentBlueprintConfiguration
  
  default PutEnvironmentBlueprintConfigurationResponse putEnvironmentBlueprintConfiguration(PutEnvironmentBlueprintConfigurationRequest putEnvironmentBlueprintConfigurationRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Writes the configuration for the specified environment blueprint in Amazon DataZone.
  Parameters:
  
  putEnvironmentBlueprintConfigurationRequest -
  
  Returns:
  
  Result of the PutEnvironmentBlueprintConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putEnvironmentBlueprintConfiguration
  
  default PutEnvironmentBlueprintConfigurationResponse putEnvironmentBlueprintConfiguration(Consumer<PutEnvironmentBlueprintConfigurationRequest.Builder> putEnvironmentBlueprintConfigurationRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Writes the configuration for the specified environment blueprint in Amazon DataZone.
  
  This is a convenience which creates an instance of the PutEnvironmentBlueprintConfigurationRequest.Builder avoiding the need to create one manually via PutEnvironmentBlueprintConfigurationRequest.builder()
  Parameters:
  
  putEnvironmentBlueprintConfigurationRequest - A Consumer that will call methods on PutEnvironmentBlueprintConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutEnvironmentBlueprintConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- rejectPredictions
  
  default RejectPredictionsResponse rejectPredictions(RejectPredictionsRequest rejectPredictionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Rejects automatically generated business-friendly metadata for your Amazon DataZone assets.
  Parameters:
  
  rejectPredictionsRequest -
  
  Returns:
  
  Result of the RejectPredictions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- rejectPredictions
  
  default RejectPredictionsResponse rejectPredictions(Consumer<RejectPredictionsRequest.Builder> rejectPredictionsRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Rejects automatically generated business-friendly metadata for your Amazon DataZone assets.
  
  This is a convenience which creates an instance of the RejectPredictionsRequest.Builder avoiding the need to create one manually via RejectPredictionsRequest.builder()
  Parameters:
  
  rejectPredictionsRequest - A Consumer that will call methods on RejectPredictionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the RejectPredictions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- rejectSubscriptionRequest
  
  default RejectSubscriptionRequestResponse rejectSubscriptionRequest(RejectSubscriptionRequestRequest rejectSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Rejects the specified subscription request.
  Parameters:
  
  rejectSubscriptionRequestRequest -
  
  Returns:
  
  Result of the RejectSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- rejectSubscriptionRequest
  
  default RejectSubscriptionRequestResponse rejectSubscriptionRequest(Consumer<RejectSubscriptionRequestRequest.Builder> rejectSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Rejects the specified subscription request.
  
  This is a convenience which creates an instance of the RejectSubscriptionRequestRequest.Builder avoiding the need to create one manually via RejectSubscriptionRequestRequest.builder()
  Parameters:
  
  rejectSubscriptionRequestRequest - A Consumer that will call methods on RejectSubscriptionRequestRequest.Builder to create a request.
  
  Returns:
  
  Result of the RejectSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- revokeSubscription
  
  default RevokeSubscriptionResponse revokeSubscription(RevokeSubscriptionRequest revokeSubscriptionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Revokes a specified subscription in Amazon DataZone.
  Parameters:
  
  revokeSubscriptionRequest -
  
  Returns:
  
  Result of the RevokeSubscription operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- revokeSubscription
  
  default RevokeSubscriptionResponse revokeSubscription(Consumer<RevokeSubscriptionRequest.Builder> revokeSubscriptionRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Revokes a specified subscription in Amazon DataZone.
  
  This is a convenience which creates an instance of the RevokeSubscriptionRequest.Builder avoiding the need to create one manually via RevokeSubscriptionRequest.builder()
  Parameters:
  
  revokeSubscriptionRequest - A Consumer that will call methods on RevokeSubscriptionRequest.Builder to create a request.
  
  Returns:
  
  Result of the RevokeSubscription operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- search
  
  default SearchResponse search(SearchRequest searchRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches for assets in Amazon DataZone.
  Parameters:
  
  searchRequest -
  
  Returns:
  
  Result of the Search operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- search
  
  default SearchResponse search(Consumer<SearchRequest.Builder> searchRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches for assets in Amazon DataZone.
  
  This is a convenience which creates an instance of the SearchRequest.Builder avoiding the need to create one manually via SearchRequest.builder()
  Parameters:
  
  searchRequest - A Consumer that will call methods on SearchRequest.Builder to create a request.
  
  Returns:
  
  Result of the Search operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchPaginator
  
  default SearchIterable searchPaginator(SearchRequest searchRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of search(software.amazon.awssdk.services.datazone.model.SearchRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchIterable responses = client.searchPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchIterable responses = client.searchPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchIterable responses = client.searchPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the search(software.amazon.awssdk.services.datazone.model.SearchRequest) operation.
  Parameters:
  
  searchRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchPaginator
  
  default SearchIterable searchPaginator(Consumer<SearchRequest.Builder> searchRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of search(software.amazon.awssdk.services.datazone.model.SearchRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchIterable responses = client.searchPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchIterable responses = client.searchPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchIterable responses = client.searchPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the search(software.amazon.awssdk.services.datazone.model.SearchRequest) operation.
  
  This is a convenience which creates an instance of the SearchRequest.Builder avoiding the need to create one manually via SearchRequest.builder()
  Parameters:
  
  searchRequest - A Consumer that will call methods on SearchRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchGroupProfiles
  
  default SearchGroupProfilesResponse searchGroupProfiles(SearchGroupProfilesRequest searchGroupProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches group profiles in Amazon DataZone.
  Parameters:
  
  searchGroupProfilesRequest -
  
  Returns:
  
  Result of the SearchGroupProfiles operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchGroupProfiles
  
  default SearchGroupProfilesResponse searchGroupProfiles(Consumer<SearchGroupProfilesRequest.Builder> searchGroupProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches group profiles in Amazon DataZone.
  
  This is a convenience which creates an instance of the SearchGroupProfilesRequest.Builder avoiding the need to create one manually via SearchGroupProfilesRequest.builder()
  Parameters:
  
  searchGroupProfilesRequest - A Consumer that will call methods on SearchGroupProfilesRequest.Builder to create a request.
  
  Returns:
  
  Result of the SearchGroupProfiles operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchGroupProfilesPaginator
  
  default SearchGroupProfilesIterable searchGroupProfilesPaginator(SearchGroupProfilesRequest searchGroupProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchGroupProfiles(software.amazon.awssdk.services.datazone.model.SearchGroupProfilesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchGroupProfilesIterable responses = client.searchGroupProfilesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchGroupProfilesIterable responses = client .searchGroupProfilesPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchGroupProfilesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchGroupProfilesIterable responses = client.searchGroupProfilesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchGroupProfiles(software.amazon.awssdk.services.datazone.model.SearchGroupProfilesRequest) operation.
  Parameters:
  
  searchGroupProfilesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchGroupProfilesPaginator
  
  default SearchGroupProfilesIterable searchGroupProfilesPaginator(Consumer<SearchGroupProfilesRequest.Builder> searchGroupProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchGroupProfiles(software.amazon.awssdk.services.datazone.model.SearchGroupProfilesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchGroupProfilesIterable responses = client.searchGroupProfilesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchGroupProfilesIterable responses = client .searchGroupProfilesPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchGroupProfilesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchGroupProfilesIterable responses = client.searchGroupProfilesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchGroupProfiles(software.amazon.awssdk.services.datazone.model.SearchGroupProfilesRequest) operation.
  
  This is a convenience which creates an instance of the SearchGroupProfilesRequest.Builder avoiding the need to create one manually via SearchGroupProfilesRequest.builder()
  Parameters:
  
  searchGroupProfilesRequest - A Consumer that will call methods on SearchGroupProfilesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchListings
  
  default SearchListingsResponse searchListings(SearchListingsRequest searchListingsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches listings (records of an asset at a given time) in Amazon DataZone.
  Parameters:
  
  searchListingsRequest -
  
  Returns:
  
  Result of the SearchListings operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchListings
  
  default SearchListingsResponse searchListings(Consumer<SearchListingsRequest.Builder> searchListingsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches listings (records of an asset at a given time) in Amazon DataZone.
  
  This is a convenience which creates an instance of the SearchListingsRequest.Builder avoiding the need to create one manually via SearchListingsRequest.builder()
  Parameters:
  
  searchListingsRequest - A Consumer that will call methods on SearchListingsRequest.Builder to create a request.
  
  Returns:
  
  Result of the SearchListings operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchListingsPaginator
  
  default SearchListingsIterable searchListingsPaginator(SearchListingsRequest searchListingsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchListings(software.amazon.awssdk.services.datazone.model.SearchListingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchListingsIterable responses = client.searchListingsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchListingsIterable responses = client .searchListingsPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchListingsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchListingsIterable responses = client.searchListingsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchListings(software.amazon.awssdk.services.datazone.model.SearchListingsRequest) operation.
  Parameters:
  
  searchListingsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchListingsPaginator
  
  default SearchListingsIterable searchListingsPaginator(Consumer<SearchListingsRequest.Builder> searchListingsRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchListings(software.amazon.awssdk.services.datazone.model.SearchListingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchListingsIterable responses = client.searchListingsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchListingsIterable responses = client .searchListingsPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchListingsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchListingsIterable responses = client.searchListingsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchListings(software.amazon.awssdk.services.datazone.model.SearchListingsRequest) operation.
  
  This is a convenience which creates an instance of the SearchListingsRequest.Builder avoiding the need to create one manually via SearchListingsRequest.builder()
  Parameters:
  
  searchListingsRequest - A Consumer that will call methods on SearchListingsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchTypes
  
  default SearchTypesResponse searchTypes(SearchTypesRequest searchTypesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches for types in Amazon DataZone.
  Parameters:
  
  searchTypesRequest -
  
  Returns:
  
  Result of the SearchTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchTypes
  
  default SearchTypesResponse searchTypes(Consumer<SearchTypesRequest.Builder> searchTypesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches for types in Amazon DataZone.
  
  This is a convenience which creates an instance of the SearchTypesRequest.Builder avoiding the need to create one manually via SearchTypesRequest.builder()
  Parameters:
  
  searchTypesRequest - A Consumer that will call methods on SearchTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the SearchTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchTypesPaginator
  
  default SearchTypesIterable searchTypesPaginator(SearchTypesRequest searchTypesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchTypes(software.amazon.awssdk.services.datazone.model.SearchTypesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchTypesIterable responses = client.searchTypesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchTypesIterable responses = client.searchTypesPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchTypesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchTypesIterable responses = client.searchTypesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchTypes(software.amazon.awssdk.services.datazone.model.SearchTypesRequest) operation.
  Parameters:
  
  searchTypesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchTypesPaginator
  
  default SearchTypesIterable searchTypesPaginator(Consumer<SearchTypesRequest.Builder> searchTypesRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchTypes(software.amazon.awssdk.services.datazone.model.SearchTypesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchTypesIterable responses = client.searchTypesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchTypesIterable responses = client.searchTypesPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchTypesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchTypesIterable responses = client.searchTypesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchTypes(software.amazon.awssdk.services.datazone.model.SearchTypesRequest) operation.
  
  This is a convenience which creates an instance of the SearchTypesRequest.Builder avoiding the need to create one manually via SearchTypesRequest.builder()
  Parameters:
  
  searchTypesRequest - A Consumer that will call methods on SearchTypesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchUserProfiles
  
  default SearchUserProfilesResponse searchUserProfiles(SearchUserProfilesRequest searchUserProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches user profiles in Amazon DataZone.
  Parameters:
  
  searchUserProfilesRequest -
  
  Returns:
  
  Result of the SearchUserProfiles operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchUserProfiles
  
  default SearchUserProfilesResponse searchUserProfiles(Consumer<SearchUserProfilesRequest.Builder> searchUserProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Searches user profiles in Amazon DataZone.
  
  This is a convenience which creates an instance of the SearchUserProfilesRequest.Builder avoiding the need to create one manually via SearchUserProfilesRequest.builder()
  Parameters:
  
  searchUserProfilesRequest - A Consumer that will call methods on SearchUserProfilesRequest.Builder to create a request.
  
  Returns:
  
  Result of the SearchUserProfiles operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- searchUserProfilesPaginator
  
  default SearchUserProfilesIterable searchUserProfilesPaginator(SearchUserProfilesRequest searchUserProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchUserProfiles(software.amazon.awssdk.services.datazone.model.SearchUserProfilesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchUserProfilesIterable responses = client.searchUserProfilesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchUserProfilesIterable responses = client .searchUserProfilesPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchUserProfilesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchUserProfilesIterable responses = client.searchUserProfilesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchUserProfiles(software.amazon.awssdk.services.datazone.model.SearchUserProfilesRequest) operation.
  Parameters:
  
  searchUserProfilesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- searchUserProfilesPaginator
  
  default SearchUserProfilesIterable searchUserProfilesPaginator(Consumer<SearchUserProfilesRequest.Builder> searchUserProfilesRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  This is a variant of searchUserProfiles(software.amazon.awssdk.services.datazone.model.SearchUserProfilesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.datazone.paginators.SearchUserProfilesIterable responses = client.searchUserProfilesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.datazone.paginators.SearchUserProfilesIterable responses = client .searchUserProfilesPaginator(request); for (software.amazon.awssdk.services.datazone.model.SearchUserProfilesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.datazone.paginators.SearchUserProfilesIterable responses = client.searchUserProfilesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the searchUserProfiles(software.amazon.awssdk.services.datazone.model.SearchUserProfilesRequest) operation.
  
  This is a convenience which creates an instance of the SearchUserProfilesRequest.Builder avoiding the need to create one manually via SearchUserProfilesRequest.builder()
  Parameters:
  
  searchUserProfilesRequest - A Consumer that will call methods on SearchUserProfilesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- startDataSourceRun
  
  default StartDataSourceRunResponse startDataSourceRun(StartDataSourceRunRequest startDataSourceRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Start the run of the specified data source in Amazon DataZone.
  Parameters:
  
  startDataSourceRunRequest -
  
  Returns:
  
  Result of the StartDataSourceRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startDataSourceRun
  
  default StartDataSourceRunResponse startDataSourceRun(Consumer<StartDataSourceRunRequest.Builder> startDataSourceRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Start the run of the specified data source in Amazon DataZone.
  
  This is a convenience which creates an instance of the StartDataSourceRunRequest.Builder avoiding the need to create one manually via StartDataSourceRunRequest.builder()
  Parameters:
  
  startDataSourceRunRequest - A Consumer that will call methods on StartDataSourceRunRequest.Builder to create a request.
  
  Returns:
  
  Result of the StartDataSourceRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startMetadataGenerationRun
  
  default StartMetadataGenerationRunResponse startMetadataGenerationRun(StartMetadataGenerationRunRequest startMetadataGenerationRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Starts the metadata generation run.
  Parameters:
  
  startMetadataGenerationRunRequest -
  
  Returns:
  
  Result of the StartMetadataGenerationRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startMetadataGenerationRun
  
  default StartMetadataGenerationRunResponse startMetadataGenerationRun(Consumer<StartMetadataGenerationRunRequest.Builder> startMetadataGenerationRunRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Starts the metadata generation run.
  
  This is a convenience which creates an instance of the StartMetadataGenerationRunRequest.Builder avoiding the need to create one manually via StartMetadataGenerationRunRequest.builder()
  Parameters:
  
  startMetadataGenerationRunRequest - A Consumer that will call methods on StartMetadataGenerationRunRequest.Builder to create a request.
  
  Returns:
  
  Result of the StartMetadataGenerationRun operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- tagResource
  
  default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Tags a resource in Amazon DataZone.
  Parameters:
  
  tagResourceRequest -
  
  Returns:
  
  Result of the TagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- tagResource
  
  default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Tags a resource in Amazon DataZone.
  
  This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
  Parameters:
  
  tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the TagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- untagResource
  
  default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Untags a resource in Amazon DataZone.
  Parameters:
  
  untagResourceRequest -
  
  Returns:
  
  Result of the UntagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- untagResource
  
  default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Untags a resource in Amazon DataZone.
  
  This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
  Parameters:
  
  untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the UntagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDataSource
  
  default UpdateDataSourceResponse updateDataSource(UpdateDataSourceRequest updateDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified data source in Amazon DataZone.
  Parameters:
  
  updateDataSourceRequest -
  
  Returns:
  
  Result of the UpdateDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDataSource
  
  default UpdateDataSourceResponse updateDataSource(Consumer<UpdateDataSourceRequest.Builder> updateDataSourceRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified data source in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateDataSourceRequest.Builder avoiding the need to create one manually via UpdateDataSourceRequest.builder()
  Parameters:
  
  updateDataSourceRequest - A Consumer that will call methods on UpdateDataSourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateDataSource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDomain
  
  default UpdateDomainResponse updateDomain(UpdateDomainRequest updateDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates a Amazon DataZone domain.
  Parameters:
  
  updateDomainRequest -
  
  Returns:
  
  Result of the UpdateDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDomain
  
  default UpdateDomainResponse updateDomain(Consumer<UpdateDomainRequest.Builder> updateDomainRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates a Amazon DataZone domain.
  
  This is a convenience which creates an instance of the UpdateDomainRequest.Builder avoiding the need to create one manually via UpdateDomainRequest.builder()
  Parameters:
  
  updateDomainRequest - A Consumer that will call methods on UpdateDomainRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateDomain operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateEnvironment
  
  default UpdateEnvironmentResponse updateEnvironment(UpdateEnvironmentRequest updateEnvironmentRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified environment in Amazon DataZone.
  Parameters:
  
  updateEnvironmentRequest -
  
  Returns:
  
  Result of the UpdateEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateEnvironment
  
  default UpdateEnvironmentResponse updateEnvironment(Consumer<UpdateEnvironmentRequest.Builder> updateEnvironmentRequest) throws InternalServerException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified environment in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateEnvironmentRequest.Builder avoiding the need to create one manually via UpdateEnvironmentRequest.builder()
  Parameters:
  
  updateEnvironmentRequest - A Consumer that will call methods on UpdateEnvironmentRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateEnvironment operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateEnvironmentProfile
  
  default UpdateEnvironmentProfileResponse updateEnvironmentProfile(UpdateEnvironmentProfileRequest updateEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified environment profile in Amazon DataZone.
  Parameters:
  
  updateEnvironmentProfileRequest -
  
  Returns:
  
  Result of the UpdateEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateEnvironmentProfile
  
  default UpdateEnvironmentProfileResponse updateEnvironmentProfile(Consumer<UpdateEnvironmentProfileRequest.Builder> updateEnvironmentProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified environment profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateEnvironmentProfileRequest.Builder avoiding the need to create one manually via UpdateEnvironmentProfileRequest.builder()
  Parameters:
  
  updateEnvironmentProfileRequest - A Consumer that will call methods on UpdateEnvironmentProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateEnvironmentProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateGlossary
  
  default UpdateGlossaryResponse updateGlossary(UpdateGlossaryRequest updateGlossaryRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the business glossary in Amazon DataZone.
  Parameters:
  
  updateGlossaryRequest -
  
  Returns:
  
  Result of the UpdateGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateGlossary
  
  default UpdateGlossaryResponse updateGlossary(Consumer<UpdateGlossaryRequest.Builder> updateGlossaryRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the business glossary in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateGlossaryRequest.Builder avoiding the need to create one manually via UpdateGlossaryRequest.builder()
  Parameters:
  
  updateGlossaryRequest - A Consumer that will call methods on UpdateGlossaryRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateGlossary operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateGlossaryTerm
  
  default UpdateGlossaryTermResponse updateGlossaryTerm(UpdateGlossaryTermRequest updateGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates a business glossary term in Amazon DataZone.
  Parameters:
  
  updateGlossaryTermRequest -
  
  Returns:
  
  Result of the UpdateGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateGlossaryTerm
  
  default UpdateGlossaryTermResponse updateGlossaryTerm(Consumer<UpdateGlossaryTermRequest.Builder> updateGlossaryTermRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates a business glossary term in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateGlossaryTermRequest.Builder avoiding the need to create one manually via UpdateGlossaryTermRequest.builder()
  Parameters:
  
  updateGlossaryTermRequest - A Consumer that will call methods on UpdateGlossaryTermRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateGlossaryTerm operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateGroupProfile
  
  default UpdateGroupProfileResponse updateGroupProfile(UpdateGroupProfileRequest updateGroupProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified group profile in Amazon DataZone.
  Parameters:
  
  updateGroupProfileRequest -
  
  Returns:
  
  Result of the UpdateGroupProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateGroupProfile
  
  default UpdateGroupProfileResponse updateGroupProfile(Consumer<UpdateGroupProfileRequest.Builder> updateGroupProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified group profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateGroupProfileRequest.Builder avoiding the need to create one manually via UpdateGroupProfileRequest.builder()
  Parameters:
  
  updateGroupProfileRequest - A Consumer that will call methods on UpdateGroupProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateGroupProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateProject
  
  default UpdateProjectResponse updateProject(UpdateProjectRequest updateProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified project in Amazon DataZone.
  Parameters:
  
  updateProjectRequest -
  
  Returns:
  
  Result of the UpdateProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateProject
  
  default UpdateProjectResponse updateProject(Consumer<UpdateProjectRequest.Builder> updateProjectRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ServiceQuotaExceededException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified project in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateProjectRequest.Builder avoiding the need to create one manually via UpdateProjectRequest.builder()
  Parameters:
  
  updateProjectRequest - A Consumer that will call methods on UpdateProjectRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateProject operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateSubscriptionGrantStatus
  
  default UpdateSubscriptionGrantStatusResponse updateSubscriptionGrantStatus(UpdateSubscriptionGrantStatusRequest updateSubscriptionGrantStatusRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the status of the specified subscription grant status in Amazon DataZone.
  Parameters:
  
  updateSubscriptionGrantStatusRequest -
  
  Returns:
  
  Result of the UpdateSubscriptionGrantStatus operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateSubscriptionGrantStatus
  
  default UpdateSubscriptionGrantStatusResponse updateSubscriptionGrantStatus(Consumer<UpdateSubscriptionGrantStatusRequest.Builder> updateSubscriptionGrantStatusRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the status of the specified subscription grant status in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateSubscriptionGrantStatusRequest.Builder avoiding the need to create one manually via UpdateSubscriptionGrantStatusRequest.builder()
  Parameters:
  
  updateSubscriptionGrantStatusRequest - A Consumer that will call methods on UpdateSubscriptionGrantStatusRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateSubscriptionGrantStatus operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateSubscriptionRequest
  
  default UpdateSubscriptionRequestResponse updateSubscriptionRequest(UpdateSubscriptionRequestRequest updateSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates a specified subscription request in Amazon DataZone.
  Parameters:
  
  updateSubscriptionRequestRequest -
  
  Returns:
  
  Result of the UpdateSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateSubscriptionRequest
  
  default UpdateSubscriptionRequestResponse updateSubscriptionRequest(Consumer<UpdateSubscriptionRequestRequest.Builder> updateSubscriptionRequestRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates a specified subscription request in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateSubscriptionRequestRequest.Builder avoiding the need to create one manually via UpdateSubscriptionRequestRequest.builder()
  Parameters:
  
  updateSubscriptionRequestRequest - A Consumer that will call methods on UpdateSubscriptionRequestRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateSubscriptionRequest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateSubscriptionTarget
  
  default UpdateSubscriptionTargetResponse updateSubscriptionTarget(UpdateSubscriptionTargetRequest updateSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified subscription target in Amazon DataZone.
  Parameters:
  
  updateSubscriptionTargetRequest -
  
  Returns:
  
  Result of the UpdateSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateSubscriptionTarget
  
  default UpdateSubscriptionTargetResponse updateSubscriptionTarget(Consumer<UpdateSubscriptionTargetRequest.Builder> updateSubscriptionTargetRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ConflictException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified subscription target in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateSubscriptionTargetRequest.Builder avoiding the need to create one manually via UpdateSubscriptionTargetRequest.builder()
  Parameters:
  
  updateSubscriptionTargetRequest - A Consumer that will call methods on UpdateSubscriptionTargetRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateSubscriptionTarget operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateUserProfile
  
  default UpdateUserProfileResponse updateUserProfile(UpdateUserProfileRequest updateUserProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified user profile in Amazon DataZone.
  Parameters:
  
  updateUserProfileRequest -
  
  Returns:
  
  Result of the UpdateUserProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateUserProfile
  
  default UpdateUserProfileResponse updateUserProfile(Consumer<UpdateUserProfileRequest.Builder> updateUserProfileRequest) throws InternalServerException, ResourceNotFoundException, AccessDeniedException, ThrottlingException, ValidationException, UnauthorizedException, AwsServiceException, SdkClientException, DataZoneException
  
  Updates the specified user profile in Amazon DataZone.
  
  This is a convenience which creates an instance of the UpdateUserProfileRequest.Builder avoiding the need to create one manually via UpdateUserProfileRequest.builder()
  Parameters:
  
  updateUserProfileRequest - A Consumer that will call methods on UpdateUserProfileRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateUserProfile operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- create
  
  static DataZoneClient create()
  
  Create a DataZoneClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
- builder
  
  static DataZoneClientBuilder builder()
  
  Create a builder that can be used to configure and create a DataZoneClient.
- serviceMetadata
  
  static ServiceMetadata serviceMetadata()
- serviceClientConfiguration
  
  default DataZoneServiceClientConfiguration serviceClientConfiguration()
  
  Description copied from interface: SdkClient
  
  The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
  
  Specified by:
  
  serviceClientConfiguration in interface AwsClient
  
  Specified by:
  
  serviceClientConfiguration in interface SdkClient
  
  Returns:
  
  SdkServiceClientConfiguration

Interface DataZoneClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Details

SERVICE_NAME

SERVICE_METADATA_ID

Method Details

acceptPredictions

acceptPredictions

acceptSubscriptionRequest

acceptSubscriptionRequest

cancelMetadataGenerationRun

cancelMetadataGenerationRun

cancelSubscription

cancelSubscription

createAsset

createAsset

createAssetRevision

createAssetRevision

createAssetType

createAssetType

createDataSource

createDataSource

createDomain

createDomain

createEnvironment

createEnvironment

createEnvironmentProfile

createEnvironmentProfile

createFormType

createFormType

createGlossary

createGlossary

createGlossaryTerm

createGlossaryTerm

createGroupProfile

createGroupProfile

createListingChangeSet

createListingChangeSet

createProject

createProject

createProjectMembership

createProjectMembership

createSubscriptionGrant

createSubscriptionGrant

createSubscriptionRequest

createSubscriptionRequest

createSubscriptionTarget

createSubscriptionTarget

createUserProfile

createUserProfile

deleteAsset

deleteAsset

deleteAssetType

deleteAssetType

deleteDataSource

deleteDataSource

deleteDomain

deleteDomain

deleteEnvironment

deleteEnvironment

deleteEnvironmentBlueprintConfiguration

deleteEnvironmentBlueprintConfiguration

deleteEnvironmentProfile

deleteEnvironmentProfile

deleteFormType

deleteFormType

deleteGlossary

deleteGlossary

deleteGlossaryTerm

deleteGlossaryTerm

deleteListing

deleteListing

deleteProject

deleteProject

deleteProjectMembership

deleteProjectMembership

deleteSubscriptionGrant