Interface DirectConnectClient
- All Superinterfaces:
AutoCloseable
,AwsClient
,SdkAutoCloseable
,SdkClient
builder()
method.
Direct Connect links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router. With this connection in place, you can create virtual interfaces directly to the Amazon Web Services Cloud (for example, to Amazon EC2 and Amazon S3) and to Amazon VPC, bypassing Internet service providers in your network path. A connection provides access to all Amazon Web Services Regions except the China (Beijing) and (China) Ningxia Regions. Amazon Web Services resources in the China Regions can only be accessed through locations associated with those Regions.
-
Field Summary
Modifier and TypeFieldDescriptionstatic final String
Value for looking up the service's metadata from theServiceMetadataProvider
.static final String
-
Method Summary
Modifier and TypeMethodDescriptionacceptDirectConnectGatewayAssociationProposal
(Consumer<AcceptDirectConnectGatewayAssociationProposalRequest.Builder> acceptDirectConnectGatewayAssociationProposalRequest) Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.acceptDirectConnectGatewayAssociationProposal
(AcceptDirectConnectGatewayAssociationProposalRequest acceptDirectConnectGatewayAssociationProposalRequest) Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.default AllocateHostedConnectionResponse
allocateHostedConnection
(Consumer<AllocateHostedConnectionRequest.Builder> allocateHostedConnectionRequest) Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.default AllocateHostedConnectionResponse
allocateHostedConnection
(AllocateHostedConnectionRequest allocateHostedConnectionRequest) Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.allocatePrivateVirtualInterface
(Consumer<AllocatePrivateVirtualInterfaceRequest.Builder> allocatePrivateVirtualInterfaceRequest) Provisions a private virtual interface to be owned by the specified Amazon Web Services account.allocatePrivateVirtualInterface
(AllocatePrivateVirtualInterfaceRequest allocatePrivateVirtualInterfaceRequest) Provisions a private virtual interface to be owned by the specified Amazon Web Services account.allocatePublicVirtualInterface
(Consumer<AllocatePublicVirtualInterfaceRequest.Builder> allocatePublicVirtualInterfaceRequest) Provisions a public virtual interface to be owned by the specified Amazon Web Services account.allocatePublicVirtualInterface
(AllocatePublicVirtualInterfaceRequest allocatePublicVirtualInterfaceRequest) Provisions a public virtual interface to be owned by the specified Amazon Web Services account.allocateTransitVirtualInterface
(Consumer<AllocateTransitVirtualInterfaceRequest.Builder> allocateTransitVirtualInterfaceRequest) Provisions a transit virtual interface to be owned by the specified Amazon Web Services account.allocateTransitVirtualInterface
(AllocateTransitVirtualInterfaceRequest allocateTransitVirtualInterfaceRequest) Provisions a transit virtual interface to be owned by the specified Amazon Web Services account.associateConnectionWithLag
(Consumer<AssociateConnectionWithLagRequest.Builder> associateConnectionWithLagRequest) Associates an existing connection with a link aggregation group (LAG).associateConnectionWithLag
(AssociateConnectionWithLagRequest associateConnectionWithLagRequest) Associates an existing connection with a link aggregation group (LAG).associateHostedConnection
(Consumer<AssociateHostedConnectionRequest.Builder> associateHostedConnectionRequest) Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect.associateHostedConnection
(AssociateHostedConnectionRequest associateHostedConnectionRequest) Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect.default AssociateMacSecKeyResponse
associateMacSecKey
(Consumer<AssociateMacSecKeyRequest.Builder> associateMacSecKeyRequest) Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.default AssociateMacSecKeyResponse
associateMacSecKey
(AssociateMacSecKeyRequest associateMacSecKeyRequest) Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.associateVirtualInterface
(Consumer<AssociateVirtualInterfaceRequest.Builder> associateVirtualInterfaceRequest) Associates a virtual interface with a specified link aggregation group (LAG) or connection.associateVirtualInterface
(AssociateVirtualInterfaceRequest associateVirtualInterfaceRequest) Associates a virtual interface with a specified link aggregation group (LAG) or connection.static DirectConnectClientBuilder
builder()
Create a builder that can be used to configure and create aDirectConnectClient
.default ConfirmConnectionResponse
confirmConnection
(Consumer<ConfirmConnectionRequest.Builder> confirmConnectionRequest) Confirms the creation of the specified hosted connection on an interconnect.default ConfirmConnectionResponse
confirmConnection
(ConfirmConnectionRequest confirmConnectionRequest) Confirms the creation of the specified hosted connection on an interconnect.default ConfirmCustomerAgreementResponse
confirmCustomerAgreement
(Consumer<ConfirmCustomerAgreementRequest.Builder> confirmCustomerAgreementRequest) The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).default ConfirmCustomerAgreementResponse
confirmCustomerAgreement
(ConfirmCustomerAgreementRequest confirmCustomerAgreementRequest) The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).confirmPrivateVirtualInterface
(Consumer<ConfirmPrivateVirtualInterfaceRequest.Builder> confirmPrivateVirtualInterfaceRequest) Accepts ownership of a private virtual interface created by another Amazon Web Services account.confirmPrivateVirtualInterface
(ConfirmPrivateVirtualInterfaceRequest confirmPrivateVirtualInterfaceRequest) Accepts ownership of a private virtual interface created by another Amazon Web Services account.confirmPublicVirtualInterface
(Consumer<ConfirmPublicVirtualInterfaceRequest.Builder> confirmPublicVirtualInterfaceRequest) Accepts ownership of a public virtual interface created by another Amazon Web Services account.confirmPublicVirtualInterface
(ConfirmPublicVirtualInterfaceRequest confirmPublicVirtualInterfaceRequest) Accepts ownership of a public virtual interface created by another Amazon Web Services account.confirmTransitVirtualInterface
(Consumer<ConfirmTransitVirtualInterfaceRequest.Builder> confirmTransitVirtualInterfaceRequest) Accepts ownership of a transit virtual interface created by another Amazon Web Services account.confirmTransitVirtualInterface
(ConfirmTransitVirtualInterfaceRequest confirmTransitVirtualInterfaceRequest) Accepts ownership of a transit virtual interface created by another Amazon Web Services account.static DirectConnectClient
create()
Create aDirectConnectClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
.default CreateBgpPeerResponse
createBGPPeer
(Consumer<CreateBgpPeerRequest.Builder> createBgpPeerRequest) Creates a BGP peer on the specified virtual interface.default CreateBgpPeerResponse
createBGPPeer
(CreateBgpPeerRequest createBgpPeerRequest) Creates a BGP peer on the specified virtual interface.default CreateConnectionResponse
createConnection
(Consumer<CreateConnectionRequest.Builder> createConnectionRequest) Creates a connection between a customer network and a specific Direct Connect location.default CreateConnectionResponse
createConnection
(CreateConnectionRequest createConnectionRequest) Creates a connection between a customer network and a specific Direct Connect location.createDirectConnectGateway
(Consumer<CreateDirectConnectGatewayRequest.Builder> createDirectConnectGatewayRequest) Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways.createDirectConnectGateway
(CreateDirectConnectGatewayRequest createDirectConnectGatewayRequest) Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways.createDirectConnectGatewayAssociation
(Consumer<CreateDirectConnectGatewayAssociationRequest.Builder> createDirectConnectGatewayAssociationRequest) Creates an association between a Direct Connect gateway and a virtual private gateway.createDirectConnectGatewayAssociation
(CreateDirectConnectGatewayAssociationRequest createDirectConnectGatewayAssociationRequest) Creates an association between a Direct Connect gateway and a virtual private gateway.createDirectConnectGatewayAssociationProposal
(Consumer<CreateDirectConnectGatewayAssociationProposalRequest.Builder> createDirectConnectGatewayAssociationProposalRequest) Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.createDirectConnectGatewayAssociationProposal
(CreateDirectConnectGatewayAssociationProposalRequest createDirectConnectGatewayAssociationProposalRequest) Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.default CreateInterconnectResponse
createInterconnect
(Consumer<CreateInterconnectRequest.Builder> createInterconnectRequest) Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.default CreateInterconnectResponse
createInterconnect
(CreateInterconnectRequest createInterconnectRequest) Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.default CreateLagResponse
createLag
(Consumer<CreateLagRequest.Builder> createLagRequest) Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location.default CreateLagResponse
createLag
(CreateLagRequest createLagRequest) Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location.createPrivateVirtualInterface
(Consumer<CreatePrivateVirtualInterfaceRequest.Builder> createPrivateVirtualInterfaceRequest) Creates a private virtual interface.createPrivateVirtualInterface
(CreatePrivateVirtualInterfaceRequest createPrivateVirtualInterfaceRequest) Creates a private virtual interface.createPublicVirtualInterface
(Consumer<CreatePublicVirtualInterfaceRequest.Builder> createPublicVirtualInterfaceRequest) Creates a public virtual interface.createPublicVirtualInterface
(CreatePublicVirtualInterfaceRequest createPublicVirtualInterfaceRequest) Creates a public virtual interface.createTransitVirtualInterface
(Consumer<CreateTransitVirtualInterfaceRequest.Builder> createTransitVirtualInterfaceRequest) Creates a transit virtual interface.createTransitVirtualInterface
(CreateTransitVirtualInterfaceRequest createTransitVirtualInterfaceRequest) Creates a transit virtual interface.default DeleteBgpPeerResponse
deleteBGPPeer
(Consumer<DeleteBgpPeerRequest.Builder> deleteBgpPeerRequest) Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.default DeleteBgpPeerResponse
deleteBGPPeer
(DeleteBgpPeerRequest deleteBgpPeerRequest) Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.default DeleteConnectionResponse
deleteConnection
(Consumer<DeleteConnectionRequest.Builder> deleteConnectionRequest) Deletes the specified connection.default DeleteConnectionResponse
deleteConnection
(DeleteConnectionRequest deleteConnectionRequest) Deletes the specified connection.deleteDirectConnectGateway
(Consumer<DeleteDirectConnectGatewayRequest.Builder> deleteDirectConnectGatewayRequest) Deletes the specified Direct Connect gateway.deleteDirectConnectGateway
(DeleteDirectConnectGatewayRequest deleteDirectConnectGatewayRequest) Deletes the specified Direct Connect gateway.deleteDirectConnectGatewayAssociation
(Consumer<DeleteDirectConnectGatewayAssociationRequest.Builder> deleteDirectConnectGatewayAssociationRequest) Deletes the association between the specified Direct Connect gateway and virtual private gateway.deleteDirectConnectGatewayAssociation
(DeleteDirectConnectGatewayAssociationRequest deleteDirectConnectGatewayAssociationRequest) Deletes the association between the specified Direct Connect gateway and virtual private gateway.deleteDirectConnectGatewayAssociationProposal
(Consumer<DeleteDirectConnectGatewayAssociationProposalRequest.Builder> deleteDirectConnectGatewayAssociationProposalRequest) Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.deleteDirectConnectGatewayAssociationProposal
(DeleteDirectConnectGatewayAssociationProposalRequest deleteDirectConnectGatewayAssociationProposalRequest) Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.default DeleteInterconnectResponse
deleteInterconnect
(Consumer<DeleteInterconnectRequest.Builder> deleteInterconnectRequest) Deletes the specified interconnect.default DeleteInterconnectResponse
deleteInterconnect
(DeleteInterconnectRequest deleteInterconnectRequest) Deletes the specified interconnect.default DeleteLagResponse
deleteLag
(Consumer<DeleteLagRequest.Builder> deleteLagRequest) Deletes the specified link aggregation group (LAG).default DeleteLagResponse
deleteLag
(DeleteLagRequest deleteLagRequest) Deletes the specified link aggregation group (LAG).default DeleteVirtualInterfaceResponse
deleteVirtualInterface
(Consumer<DeleteVirtualInterfaceRequest.Builder> deleteVirtualInterfaceRequest) Deletes a virtual interface.default DeleteVirtualInterfaceResponse
deleteVirtualInterface
(DeleteVirtualInterfaceRequest deleteVirtualInterfaceRequest) Deletes a virtual interface.default DescribeConnectionsResponse
Displays the specified connection or all connections in this Region.default DescribeConnectionsResponse
describeConnections
(Consumer<DescribeConnectionsRequest.Builder> describeConnectionsRequest) Displays the specified connection or all connections in this Region.default DescribeConnectionsResponse
describeConnections
(DescribeConnectionsRequest describeConnectionsRequest) Displays the specified connection or all connections in this Region.default DescribeCustomerMetadataResponse
describeCustomerMetadata
(Consumer<DescribeCustomerMetadataRequest.Builder> describeCustomerMetadataRequest) Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.default DescribeCustomerMetadataResponse
describeCustomerMetadata
(DescribeCustomerMetadataRequest describeCustomerMetadataRequest) Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.describeDirectConnectGatewayAssociationProposals
(Consumer<DescribeDirectConnectGatewayAssociationProposalsRequest.Builder> describeDirectConnectGatewayAssociationProposalsRequest) Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.describeDirectConnectGatewayAssociationProposals
(DescribeDirectConnectGatewayAssociationProposalsRequest describeDirectConnectGatewayAssociationProposalsRequest) Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.describeDirectConnectGatewayAssociations
(Consumer<DescribeDirectConnectGatewayAssociationsRequest.Builder> describeDirectConnectGatewayAssociationsRequest) Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways.describeDirectConnectGatewayAssociations
(DescribeDirectConnectGatewayAssociationsRequest describeDirectConnectGatewayAssociationsRequest) Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways.describeDirectConnectGatewayAttachments
(Consumer<DescribeDirectConnectGatewayAttachmentsRequest.Builder> describeDirectConnectGatewayAttachmentsRequest) Lists the attachments between your Direct Connect gateways and virtual interfaces.describeDirectConnectGatewayAttachments
(DescribeDirectConnectGatewayAttachmentsRequest describeDirectConnectGatewayAttachmentsRequest) Lists the attachments between your Direct Connect gateways and virtual interfaces.Lists all your Direct Connect gateways or only the specified Direct Connect gateway.describeDirectConnectGateways
(Consumer<DescribeDirectConnectGatewaysRequest.Builder> describeDirectConnectGatewaysRequest) Lists all your Direct Connect gateways or only the specified Direct Connect gateway.describeDirectConnectGateways
(DescribeDirectConnectGatewaysRequest describeDirectConnectGatewaysRequest) Lists all your Direct Connect gateways or only the specified Direct Connect gateway.describeHostedConnections
(Consumer<DescribeHostedConnectionsRequest.Builder> describeHostedConnectionsRequest) Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).describeHostedConnections
(DescribeHostedConnectionsRequest describeHostedConnectionsRequest) Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).default DescribeInterconnectsResponse
Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.default DescribeInterconnectsResponse
describeInterconnects
(Consumer<DescribeInterconnectsRequest.Builder> describeInterconnectsRequest) Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.default DescribeInterconnectsResponse
describeInterconnects
(DescribeInterconnectsRequest describeInterconnectsRequest) Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.default DescribeLagsResponse
Describes all your link aggregation groups (LAG) or the specified LAG.default DescribeLagsResponse
describeLags
(Consumer<DescribeLagsRequest.Builder> describeLagsRequest) Describes all your link aggregation groups (LAG) or the specified LAG.default DescribeLagsResponse
describeLags
(DescribeLagsRequest describeLagsRequest) Describes all your link aggregation groups (LAG) or the specified LAG.default DescribeLoaResponse
describeLoa
(Consumer<DescribeLoaRequest.Builder> describeLoaRequest) Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).default DescribeLoaResponse
describeLoa
(DescribeLoaRequest describeLoaRequest) Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).default DescribeLocationsResponse
Lists the Direct Connect locations in the current Amazon Web Services Region.default DescribeLocationsResponse
describeLocations
(Consumer<DescribeLocationsRequest.Builder> describeLocationsRequest) Lists the Direct Connect locations in the current Amazon Web Services Region.default DescribeLocationsResponse
describeLocations
(DescribeLocationsRequest describeLocationsRequest) Lists the Direct Connect locations in the current Amazon Web Services Region.describeRouterConfiguration
(Consumer<DescribeRouterConfigurationRequest.Builder> describeRouterConfigurationRequest) Details about the router.describeRouterConfiguration
(DescribeRouterConfigurationRequest describeRouterConfigurationRequest) Details about the router.default DescribeTagsResponse
describeTags
(Consumer<DescribeTagsRequest.Builder> describeTagsRequest) Describes the tags associated with the specified Direct Connect resources.default DescribeTagsResponse
describeTags
(DescribeTagsRequest describeTagsRequest) Describes the tags associated with the specified Direct Connect resources.default DescribeVirtualGatewaysResponse
Lists the virtual private gateways owned by the Amazon Web Services account.default DescribeVirtualGatewaysResponse
describeVirtualGateways
(Consumer<DescribeVirtualGatewaysRequest.Builder> describeVirtualGatewaysRequest) Lists the virtual private gateways owned by the Amazon Web Services account.default DescribeVirtualGatewaysResponse
describeVirtualGateways
(DescribeVirtualGatewaysRequest describeVirtualGatewaysRequest) Lists the virtual private gateways owned by the Amazon Web Services account.Displays all virtual interfaces for an Amazon Web Services account.describeVirtualInterfaces
(Consumer<DescribeVirtualInterfacesRequest.Builder> describeVirtualInterfacesRequest) Displays all virtual interfaces for an Amazon Web Services account.describeVirtualInterfaces
(DescribeVirtualInterfacesRequest describeVirtualInterfacesRequest) Displays all virtual interfaces for an Amazon Web Services account.disassociateConnectionFromLag
(Consumer<DisassociateConnectionFromLagRequest.Builder> disassociateConnectionFromLagRequest) Disassociates a connection from a link aggregation group (LAG).disassociateConnectionFromLag
(DisassociateConnectionFromLagRequest disassociateConnectionFromLagRequest) Disassociates a connection from a link aggregation group (LAG).default DisassociateMacSecKeyResponse
disassociateMacSecKey
(Consumer<DisassociateMacSecKeyRequest.Builder> disassociateMacSecKeyRequest) Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.default DisassociateMacSecKeyResponse
disassociateMacSecKey
(DisassociateMacSecKeyRequest disassociateMacSecKeyRequest) Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.listVirtualInterfaceTestHistory
(Consumer<ListVirtualInterfaceTestHistoryRequest.Builder> listVirtualInterfaceTestHistoryRequest) Lists the virtual interface failover test history.listVirtualInterfaceTestHistory
(ListVirtualInterfaceTestHistoryRequest listVirtualInterfaceTestHistoryRequest) Lists the virtual interface failover test history.The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfigurationstatic ServiceMetadata
default StartBgpFailoverTestResponse
startBgpFailoverTest
(Consumer<StartBgpFailoverTestRequest.Builder> startBgpFailoverTestRequest) Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state.default StartBgpFailoverTestResponse
startBgpFailoverTest
(StartBgpFailoverTestRequest startBgpFailoverTestRequest) Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state.default StopBgpFailoverTestResponse
stopBgpFailoverTest
(Consumer<StopBgpFailoverTestRequest.Builder> stopBgpFailoverTestRequest) Stops the virtual interface failover test.default StopBgpFailoverTestResponse
stopBgpFailoverTest
(StopBgpFailoverTestRequest stopBgpFailoverTestRequest) Stops the virtual interface failover test.default TagResourceResponse
tagResource
(Consumer<TagResourceRequest.Builder> tagResourceRequest) Adds the specified tags to the specified Direct Connect resource.default TagResourceResponse
tagResource
(TagResourceRequest tagResourceRequest) Adds the specified tags to the specified Direct Connect resource.default UntagResourceResponse
untagResource
(Consumer<UntagResourceRequest.Builder> untagResourceRequest) Removes one or more tags from the specified Direct Connect resource.default UntagResourceResponse
untagResource
(UntagResourceRequest untagResourceRequest) Removes one or more tags from the specified Direct Connect resource.default UpdateConnectionResponse
updateConnection
(Consumer<UpdateConnectionRequest.Builder> updateConnectionRequest) Updates the Direct Connect dedicated connection configuration.default UpdateConnectionResponse
updateConnection
(UpdateConnectionRequest updateConnectionRequest) Updates the Direct Connect dedicated connection configuration.updateDirectConnectGateway
(Consumer<UpdateDirectConnectGatewayRequest.Builder> updateDirectConnectGatewayRequest) Updates the name of a current Direct Connect gateway.updateDirectConnectGateway
(UpdateDirectConnectGatewayRequest updateDirectConnectGatewayRequest) Updates the name of a current Direct Connect gateway.updateDirectConnectGatewayAssociation
(Consumer<UpdateDirectConnectGatewayAssociationRequest.Builder> updateDirectConnectGatewayAssociationRequest) Updates the specified attributes of the Direct Connect gateway association.updateDirectConnectGatewayAssociation
(UpdateDirectConnectGatewayAssociationRequest updateDirectConnectGatewayAssociationRequest) Updates the specified attributes of the Direct Connect gateway association.default UpdateLagResponse
updateLag
(Consumer<UpdateLagRequest.Builder> updateLagRequest) Updates the attributes of the specified link aggregation group (LAG).default UpdateLagResponse
updateLag
(UpdateLagRequest updateLagRequest) Updates the attributes of the specified link aggregation group (LAG).updateVirtualInterfaceAttributes
(Consumer<UpdateVirtualInterfaceAttributesRequest.Builder> updateVirtualInterfaceAttributesRequest) Updates the specified attributes of the specified virtual private interface.updateVirtualInterfaceAttributes
(UpdateVirtualInterfaceAttributesRequest updateVirtualInterfaceAttributesRequest) Updates the specified attributes of the specified virtual private interface.Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close
Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName
-
Field Details
-
SERVICE_NAME
- See Also:
-
SERVICE_METADATA_ID
Value for looking up the service's metadata from theServiceMetadataProvider
.- See Also:
-
-
Method Details
-
acceptDirectConnectGatewayAssociationProposal
default AcceptDirectConnectGatewayAssociationProposalResponse acceptDirectConnectGatewayAssociationProposal(AcceptDirectConnectGatewayAssociationProposalRequest acceptDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.
- Parameters:
acceptDirectConnectGatewayAssociationProposalRequest
-- Returns:
- Result of the AcceptDirectConnectGatewayAssociationProposal operation returned by the service.
- See Also:
-
acceptDirectConnectGatewayAssociationProposal
default AcceptDirectConnectGatewayAssociationProposalResponse acceptDirectConnectGatewayAssociationProposal(Consumer<AcceptDirectConnectGatewayAssociationProposalRequest.Builder> acceptDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.
This is a convenience which creates an instance of the
AcceptDirectConnectGatewayAssociationProposalRequest.Builder
avoiding the need to create one manually viaAcceptDirectConnectGatewayAssociationProposalRequest.builder()
- Parameters:
acceptDirectConnectGatewayAssociationProposalRequest
- AConsumer
that will call methods onAcceptDirectConnectGatewayAssociationProposalRequest.Builder
to create a request.- Returns:
- Result of the AcceptDirectConnectGatewayAssociationProposal operation returned by the service.
- See Also:
-
allocateHostedConnection
default AllocateHostedConnectionResponse allocateHostedConnection(AllocateHostedConnectionRequest allocateHostedConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.
Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. Amazon Web Services polices the hosted connection for the specified capacity and the Direct Connect Partner must also police the hosted connection for the specified capacity.
Intended for use by Direct Connect Partners only.
- Parameters:
allocateHostedConnectionRequest
-- Returns:
- Result of the AllocateHostedConnection operation returned by the service.
- See Also:
-
allocateHostedConnection
default AllocateHostedConnectionResponse allocateHostedConnection(Consumer<AllocateHostedConnectionRequest.Builder> allocateHostedConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.
Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. Amazon Web Services polices the hosted connection for the specified capacity and the Direct Connect Partner must also police the hosted connection for the specified capacity.
Intended for use by Direct Connect Partners only.
This is a convenience which creates an instance of the
AllocateHostedConnectionRequest.Builder
avoiding the need to create one manually viaAllocateHostedConnectionRequest.builder()
- Parameters:
allocateHostedConnectionRequest
- AConsumer
that will call methods onAllocateHostedConnectionRequest.Builder
to create a request.- Returns:
- Result of the AllocateHostedConnection operation returned by the service.
- See Also:
-
allocatePrivateVirtualInterface
default AllocatePrivateVirtualInterfaceResponse allocatePrivateVirtualInterface(AllocatePrivateVirtualInterfaceRequest allocatePrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Provisions a private virtual interface to be owned by the specified Amazon Web Services account.
Virtual interfaces created using this action must be confirmed by the owner using ConfirmPrivateVirtualInterface. Until then, the virtual interface is in the
Confirming
state and is not available to handle traffic.- Parameters:
allocatePrivateVirtualInterfaceRequest
-- Returns:
- Result of the AllocatePrivateVirtualInterface operation returned by the service.
- See Also:
-
allocatePrivateVirtualInterface
default AllocatePrivateVirtualInterfaceResponse allocatePrivateVirtualInterface(Consumer<AllocatePrivateVirtualInterfaceRequest.Builder> allocatePrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Provisions a private virtual interface to be owned by the specified Amazon Web Services account.
Virtual interfaces created using this action must be confirmed by the owner using ConfirmPrivateVirtualInterface. Until then, the virtual interface is in the
Confirming
state and is not available to handle traffic.
This is a convenience which creates an instance of the
AllocatePrivateVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaAllocatePrivateVirtualInterfaceRequest.builder()
- Parameters:
allocatePrivateVirtualInterfaceRequest
- AConsumer
that will call methods onAllocatePrivateVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the AllocatePrivateVirtualInterface operation returned by the service.
- See Also:
-
allocatePublicVirtualInterface
default AllocatePublicVirtualInterfaceResponse allocatePublicVirtualInterface(AllocatePublicVirtualInterfaceRequest allocatePublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Provisions a public virtual interface to be owned by the specified Amazon Web Services account.
The owner of a connection calls this function to provision a public virtual interface to be owned by the specified Amazon Web Services account.
Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the
confirming
state and is not available to handle traffic.When creating an IPv6 public virtual interface, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
- Parameters:
allocatePublicVirtualInterfaceRequest
-- Returns:
- Result of the AllocatePublicVirtualInterface operation returned by the service.
- See Also:
-
allocatePublicVirtualInterface
default AllocatePublicVirtualInterfaceResponse allocatePublicVirtualInterface(Consumer<AllocatePublicVirtualInterfaceRequest.Builder> allocatePublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Provisions a public virtual interface to be owned by the specified Amazon Web Services account.
The owner of a connection calls this function to provision a public virtual interface to be owned by the specified Amazon Web Services account.
Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the
confirming
state and is not available to handle traffic.When creating an IPv6 public virtual interface, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
This is a convenience which creates an instance of the
AllocatePublicVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaAllocatePublicVirtualInterfaceRequest.builder()
- Parameters:
allocatePublicVirtualInterfaceRequest
- AConsumer
that will call methods onAllocatePublicVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the AllocatePublicVirtualInterface operation returned by the service.
- See Also:
-
allocateTransitVirtualInterface
default AllocateTransitVirtualInterfaceResponse allocateTransitVirtualInterface(AllocateTransitVirtualInterfaceRequest allocateTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Provisions a transit virtual interface to be owned by the specified Amazon Web Services account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.
The owner of a connection provisions a transit virtual interface to be owned by the specified Amazon Web Services account.
After you create a transit virtual interface, it must be confirmed by the owner using ConfirmTransitVirtualInterface. Until this step has been completed, the transit virtual interface is in the
requested
state and is not available to handle traffic.- Parameters:
allocateTransitVirtualInterfaceRequest
-- Returns:
- Result of the AllocateTransitVirtualInterface operation returned by the service.
- See Also:
-
allocateTransitVirtualInterface
default AllocateTransitVirtualInterfaceResponse allocateTransitVirtualInterface(Consumer<AllocateTransitVirtualInterfaceRequest.Builder> allocateTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Provisions a transit virtual interface to be owned by the specified Amazon Web Services account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.
The owner of a connection provisions a transit virtual interface to be owned by the specified Amazon Web Services account.
After you create a transit virtual interface, it must be confirmed by the owner using ConfirmTransitVirtualInterface. Until this step has been completed, the transit virtual interface is in the
requested
state and is not available to handle traffic.
This is a convenience which creates an instance of the
AllocateTransitVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaAllocateTransitVirtualInterfaceRequest.builder()
- Parameters:
allocateTransitVirtualInterfaceRequest
- AConsumer
that will call methods onAllocateTransitVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the AllocateTransitVirtualInterface operation returned by the service.
- See Also:
-
associateConnectionWithLag
default AssociateConnectionWithLagResponse associateConnectionWithLag(AssociateConnectionWithLagRequest associateConnectionWithLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to Amazon Web Services is interrupted). The connection must be hosted on the same Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that's currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.
- Parameters:
associateConnectionWithLagRequest
-- Returns:
- Result of the AssociateConnectionWithLag operation returned by the service.
- See Also:
-
associateConnectionWithLag
default AssociateConnectionWithLagResponse associateConnectionWithLag(Consumer<AssociateConnectionWithLagRequest.Builder> associateConnectionWithLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to Amazon Web Services is interrupted). The connection must be hosted on the same Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that's currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.
This is a convenience which creates an instance of the
AssociateConnectionWithLagRequest.Builder
avoiding the need to create one manually viaAssociateConnectionWithLagRequest.builder()
- Parameters:
associateConnectionWithLagRequest
- AConsumer
that will call methods onAssociateConnectionWithLagRequest.Builder
to create a request.- Returns:
- Result of the AssociateConnectionWithLag operation returned by the service.
- See Also:
-
associateHostedConnection
default AssociateHostedConnectionResponse associateHostedConnection(AssociateHostedConnectionRequest associateHostedConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to Amazon Web Services as it is being migrated.
Intended for use by Direct Connect Partners only.
- Parameters:
associateHostedConnectionRequest
-- Returns:
- Result of the AssociateHostedConnection operation returned by the service.
- See Also:
-
associateHostedConnection
default AssociateHostedConnectionResponse associateHostedConnection(Consumer<AssociateHostedConnectionRequest.Builder> associateHostedConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to Amazon Web Services as it is being migrated.
Intended for use by Direct Connect Partners only.
This is a convenience which creates an instance of the
AssociateHostedConnectionRequest.Builder
avoiding the need to create one manually viaAssociateHostedConnectionRequest.builder()
- Parameters:
associateHostedConnectionRequest
- AConsumer
that will call methods onAssociateHostedConnectionRequest.Builder
to create a request.- Returns:
- Result of the AssociateHostedConnection operation returned by the service.
- See Also:
-
associateMacSecKey
default AssociateMacSecKeyResponse associateMacSecKey(AssociateMacSecKeyRequest associateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.
You must supply either the
secretARN,
or the CKN/CAK (ckn
andcak
) pair in the request.For information about MAC Security (MACsec) key considerations, see MACsec pre-shared CKN/CAK key considerations in the Direct Connect User Guide.
- Parameters:
associateMacSecKeyRequest
-- Returns:
- Result of the AssociateMacSecKey operation returned by the service.
- See Also:
-
associateMacSecKey
default AssociateMacSecKeyResponse associateMacSecKey(Consumer<AssociateMacSecKeyRequest.Builder> associateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.
You must supply either the
secretARN,
or the CKN/CAK (ckn
andcak
) pair in the request.For information about MAC Security (MACsec) key considerations, see MACsec pre-shared CKN/CAK key considerations in the Direct Connect User Guide.
This is a convenience which creates an instance of the
AssociateMacSecKeyRequest.Builder
avoiding the need to create one manually viaAssociateMacSecKeyRequest.builder()
- Parameters:
associateMacSecKeyRequest
- AConsumer
that will call methods onAssociateMacSecKeyRequest.Builder
to create a request.- Returns:
- Result of the AssociateMacSecKey operation returned by the service.
- See Also:
-
associateVirtualInterface
default AssociateVirtualInterfaceResponse associateVirtualInterface(AssociateVirtualInterfaceRequest associateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to Amazon Web Services is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.
To reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG for the association.
- Parameters:
associateVirtualInterfaceRequest
-- Returns:
- Result of the AssociateVirtualInterface operation returned by the service.
- See Also:
-
associateVirtualInterface
default AssociateVirtualInterfaceResponse associateVirtualInterface(Consumer<AssociateVirtualInterfaceRequest.Builder> associateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to Amazon Web Services is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.
To reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG for the association.
This is a convenience which creates an instance of the
AssociateVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaAssociateVirtualInterfaceRequest.builder()
- Parameters:
associateVirtualInterfaceRequest
- AConsumer
that will call methods onAssociateVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the AssociateVirtualInterface operation returned by the service.
- See Also:
-
confirmConnection
default ConfirmConnectionResponse confirmConnection(ConfirmConnectionRequest confirmConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Confirms the creation of the specified hosted connection on an interconnect.
Upon creation, the hosted connection is initially in the
Ordering
state, and remains in this state until the owner confirms creation of the hosted connection.- Parameters:
confirmConnectionRequest
-- Returns:
- Result of the ConfirmConnection operation returned by the service.
- See Also:
-
confirmConnection
default ConfirmConnectionResponse confirmConnection(Consumer<ConfirmConnectionRequest.Builder> confirmConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Confirms the creation of the specified hosted connection on an interconnect.
Upon creation, the hosted connection is initially in the
Ordering
state, and remains in this state until the owner confirms creation of the hosted connection.
This is a convenience which creates an instance of the
ConfirmConnectionRequest.Builder
avoiding the need to create one manually viaConfirmConnectionRequest.builder()
- Parameters:
confirmConnectionRequest
- AConsumer
that will call methods onConfirmConnectionRequest.Builder
to create a request.- Returns:
- Result of the ConfirmConnection operation returned by the service.
- See Also:
-
confirmCustomerAgreement
default ConfirmCustomerAgreementResponse confirmCustomerAgreement(ConfirmCustomerAgreementRequest confirmCustomerAgreementRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).
- Parameters:
confirmCustomerAgreementRequest
-- Returns:
- Result of the ConfirmCustomerAgreement operation returned by the service.
- See Also:
-
confirmCustomerAgreement
default ConfirmCustomerAgreementResponse confirmCustomerAgreement(Consumer<ConfirmCustomerAgreementRequest.Builder> confirmCustomerAgreementRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).
This is a convenience which creates an instance of the
ConfirmCustomerAgreementRequest.Builder
avoiding the need to create one manually viaConfirmCustomerAgreementRequest.builder()
- Parameters:
confirmCustomerAgreementRequest
- AConsumer
that will call methods onConfirmCustomerAgreementRequest.Builder
to create a request.- Returns:
- Result of the ConfirmCustomerAgreement operation returned by the service.
- See Also:
-
confirmPrivateVirtualInterface
default ConfirmPrivateVirtualInterfaceResponse confirmPrivateVirtualInterface(ConfirmPrivateVirtualInterfaceRequest confirmPrivateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts ownership of a private virtual interface created by another Amazon Web Services account.
After the virtual interface owner makes this call, the virtual interface is created and attached to the specified virtual private gateway or Direct Connect gateway, and is made available to handle traffic.
- Parameters:
confirmPrivateVirtualInterfaceRequest
-- Returns:
- Result of the ConfirmPrivateVirtualInterface operation returned by the service.
- See Also:
-
confirmPrivateVirtualInterface
default ConfirmPrivateVirtualInterfaceResponse confirmPrivateVirtualInterface(Consumer<ConfirmPrivateVirtualInterfaceRequest.Builder> confirmPrivateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts ownership of a private virtual interface created by another Amazon Web Services account.
After the virtual interface owner makes this call, the virtual interface is created and attached to the specified virtual private gateway or Direct Connect gateway, and is made available to handle traffic.
This is a convenience which creates an instance of the
ConfirmPrivateVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaConfirmPrivateVirtualInterfaceRequest.builder()
- Parameters:
confirmPrivateVirtualInterfaceRequest
- AConsumer
that will call methods onConfirmPrivateVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the ConfirmPrivateVirtualInterface operation returned by the service.
- See Also:
-
confirmPublicVirtualInterface
default ConfirmPublicVirtualInterfaceResponse confirmPublicVirtualInterface(ConfirmPublicVirtualInterfaceRequest confirmPublicVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts ownership of a public virtual interface created by another Amazon Web Services account.
After the virtual interface owner makes this call, the specified virtual interface is created and made available to handle traffic.
- Parameters:
confirmPublicVirtualInterfaceRequest
-- Returns:
- Result of the ConfirmPublicVirtualInterface operation returned by the service.
- See Also:
-
confirmPublicVirtualInterface
default ConfirmPublicVirtualInterfaceResponse confirmPublicVirtualInterface(Consumer<ConfirmPublicVirtualInterfaceRequest.Builder> confirmPublicVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts ownership of a public virtual interface created by another Amazon Web Services account.
After the virtual interface owner makes this call, the specified virtual interface is created and made available to handle traffic.
This is a convenience which creates an instance of the
ConfirmPublicVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaConfirmPublicVirtualInterfaceRequest.builder()
- Parameters:
confirmPublicVirtualInterfaceRequest
- AConsumer
that will call methods onConfirmPublicVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the ConfirmPublicVirtualInterface operation returned by the service.
- See Also:
-
confirmTransitVirtualInterface
default ConfirmTransitVirtualInterfaceResponse confirmTransitVirtualInterface(ConfirmTransitVirtualInterfaceRequest confirmTransitVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts ownership of a transit virtual interface created by another Amazon Web Services account.
After the owner of the transit virtual interface makes this call, the specified transit virtual interface is created and made available to handle traffic.
- Parameters:
confirmTransitVirtualInterfaceRequest
-- Returns:
- Result of the ConfirmTransitVirtualInterface operation returned by the service.
- See Also:
-
confirmTransitVirtualInterface
default ConfirmTransitVirtualInterfaceResponse confirmTransitVirtualInterface(Consumer<ConfirmTransitVirtualInterfaceRequest.Builder> confirmTransitVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Accepts ownership of a transit virtual interface created by another Amazon Web Services account.
After the owner of the transit virtual interface makes this call, the specified transit virtual interface is created and made available to handle traffic.
This is a convenience which creates an instance of the
ConfirmTransitVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaConfirmTransitVirtualInterfaceRequest.builder()
- Parameters:
confirmTransitVirtualInterfaceRequest
- AConsumer
that will call methods onConfirmTransitVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the ConfirmTransitVirtualInterface operation returned by the service.
- See Also:
-
createBGPPeer
default CreateBgpPeerResponse createBGPPeer(CreateBgpPeerRequest createBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a BGP peer on the specified virtual interface.
You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.
If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.
When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see Address Allocation for Private Internets.
For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.
- Parameters:
createBgpPeerRequest
-- Returns:
- Result of the CreateBGPPeer operation returned by the service.
- See Also:
-
createBGPPeer
default CreateBgpPeerResponse createBGPPeer(Consumer<CreateBgpPeerRequest.Builder> createBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a BGP peer on the specified virtual interface.
You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.
If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.
When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see Address Allocation for Private Internets.
For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.
This is a convenience which creates an instance of the
CreateBgpPeerRequest.Builder
avoiding the need to create one manually viaCreateBgpPeerRequest.builder()
- Parameters:
createBgpPeerRequest
- AConsumer
that will call methods onCreateBgpPeerRequest.Builder
to create a request.- Returns:
- Result of the CreateBGPPeer operation returned by the service.
- See Also:
-
createConnection
default CreateConnectionResponse createConnection(CreateConnectionRequest createConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a connection between a customer network and a specific Direct Connect location.
A connection links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router.
To find the locations for your Region, use DescribeLocations.
You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection is created.
- Parameters:
createConnectionRequest
-- Returns:
- Result of the CreateConnection operation returned by the service.
- See Also:
-
createConnection
default CreateConnectionResponse createConnection(Consumer<CreateConnectionRequest.Builder> createConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a connection between a customer network and a specific Direct Connect location.
A connection links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router.
To find the locations for your Region, use DescribeLocations.
You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection is created.
This is a convenience which creates an instance of the
CreateConnectionRequest.Builder
avoiding the need to create one manually viaCreateConnectionRequest.builder()
- Parameters:
createConnectionRequest
- AConsumer
that will call methods onCreateConnectionRequest.Builder
to create a request.- Returns:
- Result of the CreateConnection operation returned by the service.
- See Also:
-
createDirectConnectGateway
default CreateDirectConnectGatewayResponse createDirectConnectGateway(CreateDirectConnectGatewayRequest createDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any Amazon Web Services Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different Amazon Web Services Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.
- Parameters:
createDirectConnectGatewayRequest
-- Returns:
- Result of the CreateDirectConnectGateway operation returned by the service.
- See Also:
-
createDirectConnectGateway
default CreateDirectConnectGatewayResponse createDirectConnectGateway(Consumer<CreateDirectConnectGatewayRequest.Builder> createDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any Amazon Web Services Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different Amazon Web Services Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.
This is a convenience which creates an instance of the
CreateDirectConnectGatewayRequest.Builder
avoiding the need to create one manually viaCreateDirectConnectGatewayRequest.builder()
- Parameters:
createDirectConnectGatewayRequest
- AConsumer
that will call methods onCreateDirectConnectGatewayRequest.Builder
to create a request.- Returns:
- Result of the CreateDirectConnectGateway operation returned by the service.
- See Also:
-
createDirectConnectGatewayAssociation
default CreateDirectConnectGatewayAssociationResponse createDirectConnectGatewayAssociation(CreateDirectConnectGatewayAssociationRequest createDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.
- Parameters:
createDirectConnectGatewayAssociationRequest
-- Returns:
- Result of the CreateDirectConnectGatewayAssociation operation returned by the service.
- See Also:
-
createDirectConnectGatewayAssociation
default CreateDirectConnectGatewayAssociationResponse createDirectConnectGatewayAssociation(Consumer<CreateDirectConnectGatewayAssociationRequest.Builder> createDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.
This is a convenience which creates an instance of the
CreateDirectConnectGatewayAssociationRequest.Builder
avoiding the need to create one manually viaCreateDirectConnectGatewayAssociationRequest.builder()
- Parameters:
createDirectConnectGatewayAssociationRequest
- AConsumer
that will call methods onCreateDirectConnectGatewayAssociationRequest.Builder
to create a request.- Returns:
- Result of the CreateDirectConnectGatewayAssociation operation returned by the service.
- See Also:
-
createDirectConnectGatewayAssociationProposal
default CreateDirectConnectGatewayAssociationProposalResponse createDirectConnectGatewayAssociationProposal(CreateDirectConnectGatewayAssociationProposalRequest createDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.
You can associate a Direct Connect gateway and virtual private gateway or transit gateway that is owned by any Amazon Web Services account.
- Parameters:
createDirectConnectGatewayAssociationProposalRequest
-- Returns:
- Result of the CreateDirectConnectGatewayAssociationProposal operation returned by the service.
- See Also:
-
createDirectConnectGatewayAssociationProposal
default CreateDirectConnectGatewayAssociationProposalResponse createDirectConnectGatewayAssociationProposal(Consumer<CreateDirectConnectGatewayAssociationProposalRequest.Builder> createDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.
You can associate a Direct Connect gateway and virtual private gateway or transit gateway that is owned by any Amazon Web Services account.
This is a convenience which creates an instance of the
CreateDirectConnectGatewayAssociationProposalRequest.Builder
avoiding the need to create one manually viaCreateDirectConnectGatewayAssociationProposalRequest.builder()
- Parameters:
createDirectConnectGatewayAssociationProposalRequest
- AConsumer
that will call methods onCreateDirectConnectGatewayAssociationProposalRequest.Builder
to create a request.- Returns:
- Result of the CreateDirectConnectGatewayAssociationProposal operation returned by the service.
- See Also:
-
createInterconnect
default CreateInterconnectResponse createInterconnect(CreateInterconnectRequest createInterconnectRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.
An interconnect is a connection that is capable of hosting other connections. The Direct Connect Partner can use an interconnect to provide Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner's network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an Direct Connect router.
You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.
For each end customer, the Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to Amazon Web Services resources by creating a virtual interface on their connection, using the VLAN assigned to them by the Direct Connect Partner.
Intended for use by Direct Connect Partners only.
- Parameters:
createInterconnectRequest
-- Returns:
- Result of the CreateInterconnect operation returned by the service.
- See Also:
-
createInterconnect
default CreateInterconnectResponse createInterconnect(Consumer<CreateInterconnectRequest.Builder> createInterconnectRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.
An interconnect is a connection that is capable of hosting other connections. The Direct Connect Partner can use an interconnect to provide Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner's network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an Direct Connect router.
You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.
For each end customer, the Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to Amazon Web Services resources by creating a virtual interface on their connection, using the VLAN assigned to them by the Direct Connect Partner.
Intended for use by Direct Connect Partners only.
This is a convenience which creates an instance of the
CreateInterconnectRequest.Builder
avoiding the need to create one manually viaCreateInterconnectRequest.builder()
- Parameters:
createInterconnectRequest
- AConsumer
that will call methods onCreateInterconnectRequest.Builder
to create a request.- Returns:
- Result of the CreateInterconnect operation returned by the service.
- See Also:
-
createLag
default CreateLagResponse createLag(CreateLagRequest createLagRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.
All connections in a LAG must use the same bandwidth (either 1Gbps or 10Gbps) and must terminate at the same Direct Connect endpoint.
You can have up to 10 dedicated connections per LAG. Regardless of this limit, if you request more connections for the LAG than Direct Connect can allocate on a single endpoint, no LAG is created.
You can specify an existing physical dedicated connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical dedicated connection, and re-establishes them as a member of the LAG. The LAG will be created on the same Direct Connect endpoint to which the dedicated connection terminates. Any virtual interfaces associated with the dedicated connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
If the Amazon Web Services account used to create a LAG is a registered Direct Connect Partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
- Parameters:
createLagRequest
-- Returns:
- Result of the CreateLag operation returned by the service.
- See Also:
-
createLag
default CreateLagResponse createLag(Consumer<CreateLagRequest.Builder> createLagRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.
All connections in a LAG must use the same bandwidth (either 1Gbps or 10Gbps) and must terminate at the same Direct Connect endpoint.
You can have up to 10 dedicated connections per LAG. Regardless of this limit, if you request more connections for the LAG than Direct Connect can allocate on a single endpoint, no LAG is created.
You can specify an existing physical dedicated connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical dedicated connection, and re-establishes them as a member of the LAG. The LAG will be created on the same Direct Connect endpoint to which the dedicated connection terminates. Any virtual interfaces associated with the dedicated connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
If the Amazon Web Services account used to create a LAG is a registered Direct Connect Partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
This is a convenience which creates an instance of the
CreateLagRequest.Builder
avoiding the need to create one manually viaCreateLagRequest.builder()
- Parameters:
createLagRequest
- AConsumer
that will call methods onCreateLagRequest.Builder
to create a request.- Returns:
- Result of the CreateLag operation returned by the service.
- See Also:
-
createPrivateVirtualInterface
default CreatePrivateVirtualInterfaceResponse createPrivateVirtualInterface(CreatePrivateVirtualInterfaceRequest createPrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a private virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different Amazon Web Services Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.
Setting the MTU of a virtual interface to 9001 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
- Parameters:
createPrivateVirtualInterfaceRequest
-- Returns:
- Result of the CreatePrivateVirtualInterface operation returned by the service.
- See Also:
-
createPrivateVirtualInterface
default CreatePrivateVirtualInterfaceResponse createPrivateVirtualInterface(Consumer<CreatePrivateVirtualInterfaceRequest.Builder> createPrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a private virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different Amazon Web Services Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.
Setting the MTU of a virtual interface to 9001 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
This is a convenience which creates an instance of the
CreatePrivateVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaCreatePrivateVirtualInterfaceRequest.builder()
- Parameters:
createPrivateVirtualInterfaceRequest
- AConsumer
that will call methods onCreatePrivateVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the CreatePrivateVirtualInterface operation returned by the service.
- See Also:
-
createPublicVirtualInterface
default CreatePublicVirtualInterfaceResponse createPublicVirtualInterface(CreatePublicVirtualInterfaceRequest createPublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a public virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A public virtual interface supports sending traffic to public services of Amazon Web Services such as Amazon S3.
When creating an IPv6 public virtual interface (
addressFamily
isipv6
), leave thecustomer
andamazon
address fields blank to use auto-assigned IPv6 space. Custom IPv6 addresses are not supported.- Parameters:
createPublicVirtualInterfaceRequest
-- Returns:
- Result of the CreatePublicVirtualInterface operation returned by the service.
- See Also:
-
createPublicVirtualInterface
default CreatePublicVirtualInterfaceResponse createPublicVirtualInterface(Consumer<CreatePublicVirtualInterfaceRequest.Builder> createPublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a public virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A public virtual interface supports sending traffic to public services of Amazon Web Services such as Amazon S3.
When creating an IPv6 public virtual interface (
addressFamily
isipv6
), leave thecustomer
andamazon
address fields blank to use auto-assigned IPv6 space. Custom IPv6 addresses are not supported.
This is a convenience which creates an instance of the
CreatePublicVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaCreatePublicVirtualInterfaceRequest.builder()
- Parameters:
createPublicVirtualInterfaceRequest
- AConsumer
that will call methods onCreatePublicVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the CreatePublicVirtualInterface operation returned by the service.
- See Also:
-
createTransitVirtualInterface
default CreateTransitVirtualInterfaceResponse createTransitVirtualInterface(CreateTransitVirtualInterfaceRequest createTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.
If you associate your transit gateway with one or more Direct Connect gateways, the Autonomous System Number (ASN) used by the transit gateway and the Direct Connect gateway must be different. For example, if you use the default ASN 64512 for both your the transit gateway and Direct Connect gateway, the association request fails.
A jumbo MTU value must be either 1500 or 8500. No other values will be accepted. Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
- Parameters:
createTransitVirtualInterfaceRequest
-- Returns:
- Result of the CreateTransitVirtualInterface operation returned by the service.
- See Also:
-
createTransitVirtualInterface
default CreateTransitVirtualInterfaceResponse createTransitVirtualInterface(Consumer<CreateTransitVirtualInterfaceRequest.Builder> createTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.
If you associate your transit gateway with one or more Direct Connect gateways, the Autonomous System Number (ASN) used by the transit gateway and the Direct Connect gateway must be different. For example, if you use the default ASN 64512 for both your the transit gateway and Direct Connect gateway, the association request fails.
A jumbo MTU value must be either 1500 or 8500. No other values will be accepted. Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
This is a convenience which creates an instance of the
CreateTransitVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaCreateTransitVirtualInterfaceRequest.builder()
- Parameters:
createTransitVirtualInterfaceRequest
- AConsumer
that will call methods onCreateTransitVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the CreateTransitVirtualInterface operation returned by the service.
- See Also:
-
deleteBGPPeer
default DeleteBgpPeerResponse deleteBGPPeer(DeleteBgpPeerRequest deleteBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.
You cannot delete the last BGP peer from a virtual interface.
- Parameters:
deleteBgpPeerRequest
-- Returns:
- Result of the DeleteBGPPeer operation returned by the service.
- See Also:
-
deleteBGPPeer
default DeleteBgpPeerResponse deleteBGPPeer(Consumer<DeleteBgpPeerRequest.Builder> deleteBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.
You cannot delete the last BGP peer from a virtual interface.
This is a convenience which creates an instance of the
DeleteBgpPeerRequest.Builder
avoiding the need to create one manually viaDeleteBgpPeerRequest.builder()
- Parameters:
deleteBgpPeerRequest
- AConsumer
that will call methods onDeleteBgpPeerRequest.Builder
to create a request.- Returns:
- Result of the DeleteBGPPeer operation returned by the service.
- See Also:
-
deleteConnection
default DeleteConnectionResponse deleteConnection(DeleteConnectionRequest deleteConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified connection.
Deleting a connection only stops the Direct Connect port hour and data transfer charges. If you are partnering with any third parties to connect with the Direct Connect location, you must cancel your service with them separately.
- Parameters:
deleteConnectionRequest
-- Returns:
- Result of the DeleteConnection operation returned by the service.
- See Also:
-
deleteConnection
default DeleteConnectionResponse deleteConnection(Consumer<DeleteConnectionRequest.Builder> deleteConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified connection.
Deleting a connection only stops the Direct Connect port hour and data transfer charges. If you are partnering with any third parties to connect with the Direct Connect location, you must cancel your service with them separately.
This is a convenience which creates an instance of the
DeleteConnectionRequest.Builder
avoiding the need to create one manually viaDeleteConnectionRequest.builder()
- Parameters:
deleteConnectionRequest
- AConsumer
that will call methods onDeleteConnectionRequest.Builder
to create a request.- Returns:
- Result of the DeleteConnection operation returned by the service.
- See Also:
-
deleteDirectConnectGateway
default DeleteDirectConnectGatewayResponse deleteDirectConnectGateway(DeleteDirectConnectGatewayRequest deleteDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.
- Parameters:
deleteDirectConnectGatewayRequest
-- Returns:
- Result of the DeleteDirectConnectGateway operation returned by the service.
- See Also:
-
deleteDirectConnectGateway
default DeleteDirectConnectGatewayResponse deleteDirectConnectGateway(Consumer<DeleteDirectConnectGatewayRequest.Builder> deleteDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.
This is a convenience which creates an instance of the
DeleteDirectConnectGatewayRequest.Builder
avoiding the need to create one manually viaDeleteDirectConnectGatewayRequest.builder()
- Parameters:
deleteDirectConnectGatewayRequest
- AConsumer
that will call methods onDeleteDirectConnectGatewayRequest.Builder
to create a request.- Returns:
- Result of the DeleteDirectConnectGateway operation returned by the service.
- See Also:
-
deleteDirectConnectGatewayAssociation
default DeleteDirectConnectGatewayAssociationResponse deleteDirectConnectGatewayAssociation(DeleteDirectConnectGatewayAssociationRequest deleteDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the association between the specified Direct Connect gateway and virtual private gateway.
We recommend that you specify the
associationID
to delete the association. Alternatively, if you own virtual gateway and a Direct Connect gateway association, you can specify thevirtualGatewayId
anddirectConnectGatewayId
to delete an association.- Parameters:
deleteDirectConnectGatewayAssociationRequest
-- Returns:
- Result of the DeleteDirectConnectGatewayAssociation operation returned by the service.
- See Also:
-
deleteDirectConnectGatewayAssociation
default DeleteDirectConnectGatewayAssociationResponse deleteDirectConnectGatewayAssociation(Consumer<DeleteDirectConnectGatewayAssociationRequest.Builder> deleteDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the association between the specified Direct Connect gateway and virtual private gateway.
We recommend that you specify the
associationID
to delete the association. Alternatively, if you own virtual gateway and a Direct Connect gateway association, you can specify thevirtualGatewayId
anddirectConnectGatewayId
to delete an association.
This is a convenience which creates an instance of the
DeleteDirectConnectGatewayAssociationRequest.Builder
avoiding the need to create one manually viaDeleteDirectConnectGatewayAssociationRequest.builder()
- Parameters:
deleteDirectConnectGatewayAssociationRequest
- AConsumer
that will call methods onDeleteDirectConnectGatewayAssociationRequest.Builder
to create a request.- Returns:
- Result of the DeleteDirectConnectGatewayAssociation operation returned by the service.
- See Also:
-
deleteDirectConnectGatewayAssociationProposal
default DeleteDirectConnectGatewayAssociationProposalResponse deleteDirectConnectGatewayAssociationProposal(DeleteDirectConnectGatewayAssociationProposalRequest deleteDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.
- Parameters:
deleteDirectConnectGatewayAssociationProposalRequest
-- Returns:
- Result of the DeleteDirectConnectGatewayAssociationProposal operation returned by the service.
- See Also:
-
deleteDirectConnectGatewayAssociationProposal
default DeleteDirectConnectGatewayAssociationProposalResponse deleteDirectConnectGatewayAssociationProposal(Consumer<DeleteDirectConnectGatewayAssociationProposalRequest.Builder> deleteDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.
This is a convenience which creates an instance of the
DeleteDirectConnectGatewayAssociationProposalRequest.Builder
avoiding the need to create one manually viaDeleteDirectConnectGatewayAssociationProposalRequest.builder()
- Parameters:
deleteDirectConnectGatewayAssociationProposalRequest
- AConsumer
that will call methods onDeleteDirectConnectGatewayAssociationProposalRequest.Builder
to create a request.- Returns:
- Result of the DeleteDirectConnectGatewayAssociationProposal operation returned by the service.
- See Also:
-
deleteInterconnect
default DeleteInterconnectResponse deleteInterconnect(DeleteInterconnectRequest deleteInterconnectRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified interconnect.
Intended for use by Direct Connect Partners only.
- Parameters:
deleteInterconnectRequest
-- Returns:
- Result of the DeleteInterconnect operation returned by the service.
- See Also:
-
deleteInterconnect
default DeleteInterconnectResponse deleteInterconnect(Consumer<DeleteInterconnectRequest.Builder> deleteInterconnectRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified interconnect.
Intended for use by Direct Connect Partners only.
This is a convenience which creates an instance of the
DeleteInterconnectRequest.Builder
avoiding the need to create one manually viaDeleteInterconnectRequest.builder()
- Parameters:
deleteInterconnectRequest
- AConsumer
that will call methods onDeleteInterconnectRequest.Builder
to create a request.- Returns:
- Result of the DeleteInterconnect operation returned by the service.
- See Also:
-
deleteLag
default DeleteLagResponse deleteLag(DeleteLagRequest deleteLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
- Parameters:
deleteLagRequest
-- Returns:
- Result of the DeleteLag operation returned by the service.
- See Also:
-
deleteLag
default DeleteLagResponse deleteLag(Consumer<DeleteLagRequest.Builder> deleteLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
This is a convenience which creates an instance of the
DeleteLagRequest.Builder
avoiding the need to create one manually viaDeleteLagRequest.builder()
- Parameters:
deleteLagRequest
- AConsumer
that will call methods onDeleteLagRequest.Builder
to create a request.- Returns:
- Result of the DeleteLag operation returned by the service.
- See Also:
-
deleteVirtualInterface
default DeleteVirtualInterfaceResponse deleteVirtualInterface(DeleteVirtualInterfaceRequest deleteVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes a virtual interface.
- Parameters:
deleteVirtualInterfaceRequest
-- Returns:
- Result of the DeleteVirtualInterface operation returned by the service.
- See Also:
-
deleteVirtualInterface
default DeleteVirtualInterfaceResponse deleteVirtualInterface(Consumer<DeleteVirtualInterfaceRequest.Builder> deleteVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Deletes a virtual interface.
This is a convenience which creates an instance of the
DeleteVirtualInterfaceRequest.Builder
avoiding the need to create one manually viaDeleteVirtualInterfaceRequest.builder()
- Parameters:
deleteVirtualInterfaceRequest
- AConsumer
that will call methods onDeleteVirtualInterfaceRequest.Builder
to create a request.- Returns:
- Result of the DeleteVirtualInterface operation returned by the service.
- See Also:
-
describeConnections
default DescribeConnectionsResponse describeConnections(DescribeConnectionsRequest describeConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Displays the specified connection or all connections in this Region.
- Parameters:
describeConnectionsRequest
-- Returns:
- Result of the DescribeConnections operation returned by the service.
- See Also:
-
describeConnections
default DescribeConnectionsResponse describeConnections(Consumer<DescribeConnectionsRequest.Builder> describeConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Displays the specified connection or all connections in this Region.
This is a convenience which creates an instance of the
DescribeConnectionsRequest.Builder
avoiding the need to create one manually viaDescribeConnectionsRequest.builder()
- Parameters:
describeConnectionsRequest
- AConsumer
that will call methods onDescribeConnectionsRequest.Builder
to create a request.- Returns:
- Result of the DescribeConnections operation returned by the service.
- See Also:
-
describeConnections
default DescribeConnectionsResponse describeConnections() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionDisplays the specified connection or all connections in this Region.
- Returns:
- Result of the DescribeConnections operation returned by the service.
- See Also:
-
describeCustomerMetadata
default DescribeCustomerMetadataResponse describeCustomerMetadata(DescribeCustomerMetadataRequest describeCustomerMetadataRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.
- Parameters:
describeCustomerMetadataRequest
-- Returns:
- Result of the DescribeCustomerMetadata operation returned by the service.
- See Also:
-
describeCustomerMetadata
default DescribeCustomerMetadataResponse describeCustomerMetadata(Consumer<DescribeCustomerMetadataRequest.Builder> describeCustomerMetadataRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.
This is a convenience which creates an instance of the
DescribeCustomerMetadataRequest.Builder
avoiding the need to create one manually viaDescribeCustomerMetadataRequest.builder()
- Parameters:
describeCustomerMetadataRequest
- AConsumer
that will call methods onDescribeCustomerMetadataRequest.Builder
to create a request.- Returns:
- Result of the DescribeCustomerMetadata operation returned by the service.
- See Also:
-
describeDirectConnectGatewayAssociationProposals
default DescribeDirectConnectGatewayAssociationProposalsResponse describeDirectConnectGatewayAssociationProposals(DescribeDirectConnectGatewayAssociationProposalsRequest describeDirectConnectGatewayAssociationProposalsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.
- Parameters:
describeDirectConnectGatewayAssociationProposalsRequest
-- Returns:
- Result of the DescribeDirectConnectGatewayAssociationProposals operation returned by the service.
- See Also:
-
describeDirectConnectGatewayAssociationProposals
default DescribeDirectConnectGatewayAssociationProposalsResponse describeDirectConnectGatewayAssociationProposals(Consumer<DescribeDirectConnectGatewayAssociationProposalsRequest.Builder> describeDirectConnectGatewayAssociationProposalsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.
This is a convenience which creates an instance of the
DescribeDirectConnectGatewayAssociationProposalsRequest.Builder
avoiding the need to create one manually viaDescribeDirectConnectGatewayAssociationProposalsRequest.builder()
- Parameters:
describeDirectConnectGatewayAssociationProposalsRequest
- AConsumer
that will call methods onDescribeDirectConnectGatewayAssociationProposalsRequest.Builder
to create a request.- Returns:
- Result of the DescribeDirectConnectGatewayAssociationProposals operation returned by the service.
- See Also:
-
describeDirectConnectGatewayAssociations
default DescribeDirectConnectGatewayAssociationsResponse describeDirectConnectGatewayAssociations(DescribeDirectConnectGatewayAssociationsRequest describeDirectConnectGatewayAssociationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways. You must specify one of the following:
-
A Direct Connect gateway
The response contains all virtual private gateways and transit gateways associated with the Direct Connect gateway.
-
A virtual private gateway
The response contains the Direct Connect gateway.
-
A transit gateway
The response contains the Direct Connect gateway.
-
A Direct Connect gateway and a virtual private gateway
The response contains the association between the Direct Connect gateway and virtual private gateway.
-
A Direct Connect gateway and a transit gateway
The response contains the association between the Direct Connect gateway and transit gateway.
- Parameters:
describeDirectConnectGatewayAssociationsRequest
-- Returns:
- Result of the DescribeDirectConnectGatewayAssociations operation returned by the service.
- See Also:
-
-
describeDirectConnectGatewayAssociations
default DescribeDirectConnectGatewayAssociationsResponse describeDirectConnectGatewayAssociations(Consumer<DescribeDirectConnectGatewayAssociationsRequest.Builder> describeDirectConnectGatewayAssociationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways. You must specify one of the following:
-
A Direct Connect gateway
The response contains all virtual private gateways and transit gateways associated with the Direct Connect gateway.
-
A virtual private gateway
The response contains the Direct Connect gateway.
-
A transit gateway
The response contains the Direct Connect gateway.
-
A Direct Connect gateway and a virtual private gateway
The response contains the association between the Direct Connect gateway and virtual private gateway.
-
A Direct Connect gateway and a transit gateway
The response contains the association between the Direct Connect gateway and transit gateway.
This is a convenience which creates an instance of the
DescribeDirectConnectGatewayAssociationsRequest.Builder
avoiding the need to create one manually viaDescribeDirectConnectGatewayAssociationsRequest.builder()
- Parameters:
describeDirectConnectGatewayAssociationsRequest
- AConsumer
that will call methods onDescribeDirectConnectGatewayAssociationsRequest.Builder
to create a request.- Returns:
- Result of the DescribeDirectConnectGatewayAssociations operation returned by the service.
- See Also:
-
-
describeDirectConnectGatewayAttachments
default DescribeDirectConnectGatewayAttachmentsResponse describeDirectConnectGatewayAttachments(DescribeDirectConnectGatewayAttachmentsRequest describeDirectConnectGatewayAttachmentsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.
- Parameters:
describeDirectConnectGatewayAttachmentsRequest
-- Returns:
- Result of the DescribeDirectConnectGatewayAttachments operation returned by the service.
- See Also:
-
describeDirectConnectGatewayAttachments
default DescribeDirectConnectGatewayAttachmentsResponse describeDirectConnectGatewayAttachments(Consumer<DescribeDirectConnectGatewayAttachmentsRequest.Builder> describeDirectConnectGatewayAttachmentsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.
This is a convenience which creates an instance of the
DescribeDirectConnectGatewayAttachmentsRequest.Builder
avoiding the need to create one manually viaDescribeDirectConnectGatewayAttachmentsRequest.builder()
- Parameters:
describeDirectConnectGatewayAttachmentsRequest
- AConsumer
that will call methods onDescribeDirectConnectGatewayAttachmentsRequest.Builder
to create a request.- Returns:
- Result of the DescribeDirectConnectGatewayAttachments operation returned by the service.
- See Also:
-
describeDirectConnectGateways
default DescribeDirectConnectGatewaysResponse describeDirectConnectGateways(DescribeDirectConnectGatewaysRequest describeDirectConnectGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.
- Parameters:
describeDirectConnectGatewaysRequest
-- Returns:
- Result of the DescribeDirectConnectGateways operation returned by the service.
- See Also:
-
describeDirectConnectGateways
default DescribeDirectConnectGatewaysResponse describeDirectConnectGateways(Consumer<DescribeDirectConnectGatewaysRequest.Builder> describeDirectConnectGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.
This is a convenience which creates an instance of the
DescribeDirectConnectGatewaysRequest.Builder
avoiding the need to create one manually viaDescribeDirectConnectGatewaysRequest.builder()
- Parameters:
describeDirectConnectGatewaysRequest
- AConsumer
that will call methods onDescribeDirectConnectGatewaysRequest.Builder
to create a request.- Returns:
- Result of the DescribeDirectConnectGateways operation returned by the service.
- See Also:
-
describeDirectConnectGateways
default DescribeDirectConnectGatewaysResponse describeDirectConnectGateways() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionLists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.
- Returns:
- Result of the DescribeDirectConnectGateways operation returned by the service.
- See Also:
-
describeHostedConnections
default DescribeHostedConnectionsResponse describeHostedConnections(DescribeHostedConnectionsRequest describeHostedConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).
Intended for use by Direct Connect Partners only.
- Parameters:
describeHostedConnectionsRequest
-- Returns:
- Result of the DescribeHostedConnections operation returned by the service.
- See Also:
-
describeHostedConnections
default DescribeHostedConnectionsResponse describeHostedConnections(Consumer<DescribeHostedConnectionsRequest.Builder> describeHostedConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).
Intended for use by Direct Connect Partners only.
This is a convenience which creates an instance of the
DescribeHostedConnectionsRequest.Builder
avoiding the need to create one manually viaDescribeHostedConnectionsRequest.builder()
- Parameters:
describeHostedConnectionsRequest
- AConsumer
that will call methods onDescribeHostedConnectionsRequest.Builder
to create a request.- Returns:
- Result of the DescribeHostedConnections operation returned by the service.
- See Also:
-
describeInterconnects
default DescribeInterconnectsResponse describeInterconnects(DescribeInterconnectsRequest describeInterconnectsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.
- Parameters:
describeInterconnectsRequest
-- Returns:
- Result of the DescribeInterconnects operation returned by the service.
- See Also:
-
describeInterconnects
default DescribeInterconnectsResponse describeInterconnects(Consumer<DescribeInterconnectsRequest.Builder> describeInterconnectsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.
This is a convenience which creates an instance of the
DescribeInterconnectsRequest.Builder
avoiding the need to create one manually viaDescribeInterconnectsRequest.builder()
- Parameters:
describeInterconnectsRequest
- AConsumer
that will call methods onDescribeInterconnectsRequest.Builder
to create a request.- Returns:
- Result of the DescribeInterconnects operation returned by the service.
- See Also:
-
describeInterconnects
default DescribeInterconnectsResponse describeInterconnects() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionLists the interconnects owned by the Amazon Web Services account or only the specified interconnect.
- Returns:
- Result of the DescribeInterconnects operation returned by the service.
- See Also:
-
describeLags
default DescribeLagsResponse describeLags(DescribeLagsRequest describeLagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Describes all your link aggregation groups (LAG) or the specified LAG.
- Parameters:
describeLagsRequest
-- Returns:
- Result of the DescribeLags operation returned by the service.
- See Also:
-
describeLags
default DescribeLagsResponse describeLags(Consumer<DescribeLagsRequest.Builder> describeLagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Describes all your link aggregation groups (LAG) or the specified LAG.
This is a convenience which creates an instance of the
DescribeLagsRequest.Builder
avoiding the need to create one manually viaDescribeLagsRequest.builder()
- Parameters:
describeLagsRequest
- AConsumer
that will call methods onDescribeLagsRequest.Builder
to create a request.- Returns:
- Result of the DescribeLags operation returned by the service.
- See Also:
-
describeLags
default DescribeLagsResponse describeLags() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionDescribes all your link aggregation groups (LAG) or the specified LAG.
- Returns:
- Result of the DescribeLags operation returned by the service.
- See Also:
-
describeLoa
default DescribeLoaResponse describeLoa(DescribeLoaRequest describeLoaRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations in the Direct Connect User Guide.
- Parameters:
describeLoaRequest
-- Returns:
- Result of the DescribeLoa operation returned by the service.
- See Also:
-
describeLoa
default DescribeLoaResponse describeLoa(Consumer<DescribeLoaRequest.Builder> describeLoaRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations in the Direct Connect User Guide.
This is a convenience which creates an instance of the
DescribeLoaRequest.Builder
avoiding the need to create one manually viaDescribeLoaRequest.builder()
- Parameters:
describeLoaRequest
- AConsumer
that will call methods onDescribeLoaRequest.Builder
to create a request.- Returns:
- Result of the DescribeLoa operation returned by the service.
- See Also:
-
describeLocations
default DescribeLocationsResponse describeLocations(DescribeLocationsRequest describeLocationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.
- Parameters:
describeLocationsRequest
-- Returns:
- Result of the DescribeLocations operation returned by the service.
- See Also:
-
describeLocations
default DescribeLocationsResponse describeLocations(Consumer<DescribeLocationsRequest.Builder> describeLocationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.
This is a convenience which creates an instance of the
DescribeLocationsRequest.Builder
avoiding the need to create one manually viaDescribeLocationsRequest.builder()
- Parameters:
describeLocationsRequest
- AConsumer
that will call methods onDescribeLocationsRequest.Builder
to create a request.- Returns:
- Result of the DescribeLocations operation returned by the service.
- See Also:
-
describeLocations
default DescribeLocationsResponse describeLocations() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionLists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.
- Returns:
- Result of the DescribeLocations operation returned by the service.
- See Also:
-
describeRouterConfiguration
default DescribeRouterConfigurationResponse describeRouterConfiguration(DescribeRouterConfigurationRequest describeRouterConfigurationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Details about the router.
- Parameters:
describeRouterConfigurationRequest
- Provides the details about a virtual interface's router.- Returns:
- Result of the DescribeRouterConfiguration operation returned by the service.
- See Also:
-
describeRouterConfiguration
default DescribeRouterConfigurationResponse describeRouterConfiguration(Consumer<DescribeRouterConfigurationRequest.Builder> describeRouterConfigurationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Details about the router.
This is a convenience which creates an instance of the
DescribeRouterConfigurationRequest.Builder
avoiding the need to create one manually viaDescribeRouterConfigurationRequest.builder()
- Parameters:
describeRouterConfigurationRequest
- AConsumer
that will call methods onDescribeRouterConfigurationRequest.Builder
to create a request. Provides the details about a virtual interface's router.- Returns:
- Result of the DescribeRouterConfiguration operation returned by the service.
- See Also:
-
describeTags
default DescribeTagsResponse describeTags(DescribeTagsRequest describeTagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Describes the tags associated with the specified Direct Connect resources.
- Parameters:
describeTagsRequest
-- Returns:
- Result of the DescribeTags operation returned by the service.
- See Also:
-
describeTags
default DescribeTagsResponse describeTags(Consumer<DescribeTagsRequest.Builder> describeTagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Describes the tags associated with the specified Direct Connect resources.
This is a convenience which creates an instance of the
DescribeTagsRequest.Builder
avoiding the need to create one manually viaDescribeTagsRequest.builder()
- Parameters:
describeTagsRequest
- AConsumer
that will call methods onDescribeTagsRequest.Builder
to create a request.- Returns:
- Result of the DescribeTags operation returned by the service.
- See Also:
-
describeVirtualGateways
default DescribeVirtualGatewaysResponse describeVirtualGateways(DescribeVirtualGatewaysRequest describeVirtualGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the virtual private gateways owned by the Amazon Web Services account.
You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.
- Parameters:
describeVirtualGatewaysRequest
-- Returns:
- Result of the DescribeVirtualGateways operation returned by the service.
- See Also:
-
describeVirtualGateways
default DescribeVirtualGatewaysResponse describeVirtualGateways(Consumer<DescribeVirtualGatewaysRequest.Builder> describeVirtualGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the virtual private gateways owned by the Amazon Web Services account.
You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.
This is a convenience which creates an instance of the
DescribeVirtualGatewaysRequest.Builder
avoiding the need to create one manually viaDescribeVirtualGatewaysRequest.builder()
- Parameters:
describeVirtualGatewaysRequest
- AConsumer
that will call methods onDescribeVirtualGatewaysRequest.Builder
to create a request.- Returns:
- Result of the DescribeVirtualGateways operation returned by the service.
- See Also:
-
describeVirtualGateways
default DescribeVirtualGatewaysResponse describeVirtualGateways() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionLists the virtual private gateways owned by the Amazon Web Services account.
You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.
- Returns:
- Result of the DescribeVirtualGateways operation returned by the service.
- See Also:
-
describeVirtualInterfaces
default DescribeVirtualInterfacesResponse describeVirtualInterfaces(DescribeVirtualInterfacesRequest describeVirtualInterfacesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.
- Parameters:
describeVirtualInterfacesRequest
-- Returns:
- Result of the DescribeVirtualInterfaces operation returned by the service.
- See Also:
-
describeVirtualInterfaces
default DescribeVirtualInterfacesResponse describeVirtualInterfaces(Consumer<DescribeVirtualInterfacesRequest.Builder> describeVirtualInterfacesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.
This is a convenience which creates an instance of the
DescribeVirtualInterfacesRequest.Builder
avoiding the need to create one manually viaDescribeVirtualInterfacesRequest.builder()
- Parameters:
describeVirtualInterfacesRequest
- AConsumer
that will call methods onDescribeVirtualInterfacesRequest.Builder
to create a request.- Returns:
- Result of the DescribeVirtualInterfaces operation returned by the service.
- See Also:
-
describeVirtualInterfaces
default DescribeVirtualInterfacesResponse describeVirtualInterfaces() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectExceptionDisplays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.
- Returns:
- Result of the DescribeVirtualInterfaces operation returned by the service.
- See Also:
-
disassociateConnectionFromLag
default DisassociateConnectionFromLagResponse disassociateConnectionFromLag(DisassociateConnectionFromLagRequest disassociateConnectionFromLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an Direct Connect Partner is automatically converted to an interconnect.
If disassociating the connection would cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
- Parameters:
disassociateConnectionFromLagRequest
-- Returns:
- Result of the DisassociateConnectionFromLag operation returned by the service.
- See Also:
-
disassociateConnectionFromLag
default DisassociateConnectionFromLagResponse disassociateConnectionFromLag(Consumer<DisassociateConnectionFromLagRequest.Builder> disassociateConnectionFromLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an Direct Connect Partner is automatically converted to an interconnect.
If disassociating the connection would cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
This is a convenience which creates an instance of the
DisassociateConnectionFromLagRequest.Builder
avoiding the need to create one manually viaDisassociateConnectionFromLagRequest.builder()
- Parameters:
disassociateConnectionFromLagRequest
- AConsumer
that will call methods onDisassociateConnectionFromLagRequest.Builder
to create a request.- Returns:
- Result of the DisassociateConnectionFromLag operation returned by the service.
- See Also:
-
disassociateMacSecKey
default DisassociateMacSecKeyResponse disassociateMacSecKey(DisassociateMacSecKeyRequest disassociateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.
- Parameters:
disassociateMacSecKeyRequest
-- Returns:
- Result of the DisassociateMacSecKey operation returned by the service.
- See Also:
-
disassociateMacSecKey
default DisassociateMacSecKeyResponse disassociateMacSecKey(Consumer<DisassociateMacSecKeyRequest.Builder> disassociateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.
This is a convenience which creates an instance of the
DisassociateMacSecKeyRequest.Builder
avoiding the need to create one manually viaDisassociateMacSecKeyRequest.builder()
- Parameters:
disassociateMacSecKeyRequest
- AConsumer
that will call methods onDisassociateMacSecKeyRequest.Builder
to create a request.- Returns:
- Result of the DisassociateMacSecKey operation returned by the service.
- See Also:
-
listVirtualInterfaceTestHistory
default ListVirtualInterfaceTestHistoryResponse listVirtualInterfaceTestHistory(ListVirtualInterfaceTestHistoryRequest listVirtualInterfaceTestHistoryRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the virtual interface failover test history.
- Parameters:
listVirtualInterfaceTestHistoryRequest
-- Returns:
- Result of the ListVirtualInterfaceTestHistory operation returned by the service.
- See Also:
-
listVirtualInterfaceTestHistory
default ListVirtualInterfaceTestHistoryResponse listVirtualInterfaceTestHistory(Consumer<ListVirtualInterfaceTestHistoryRequest.Builder> listVirtualInterfaceTestHistoryRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Lists the virtual interface failover test history.
This is a convenience which creates an instance of the
ListVirtualInterfaceTestHistoryRequest.Builder
avoiding the need to create one manually viaListVirtualInterfaceTestHistoryRequest.builder()
- Parameters:
listVirtualInterfaceTestHistoryRequest
- AConsumer
that will call methods onListVirtualInterfaceTestHistoryRequest.Builder
to create a request.- Returns:
- Result of the ListVirtualInterfaceTestHistory operation returned by the service.
- See Also:
-
startBgpFailoverTest
default StartBgpFailoverTestResponse startBgpFailoverTest(StartBgpFailoverTestRequest startBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state. You can then send traffic to verify that there are no outages.
You can run the test on public, private, transit, and hosted virtual interfaces.
You can use ListVirtualInterfaceTestHistory to view the virtual interface test history.
If you need to stop the test before the test interval completes, use StopBgpFailoverTest.
- Parameters:
startBgpFailoverTestRequest
-- Returns:
- Result of the StartBgpFailoverTest operation returned by the service.
- See Also:
-
startBgpFailoverTest
default StartBgpFailoverTestResponse startBgpFailoverTest(Consumer<StartBgpFailoverTestRequest.Builder> startBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state. You can then send traffic to verify that there are no outages.
You can run the test on public, private, transit, and hosted virtual interfaces.
You can use ListVirtualInterfaceTestHistory to view the virtual interface test history.
If you need to stop the test before the test interval completes, use StopBgpFailoverTest.
This is a convenience which creates an instance of the
StartBgpFailoverTestRequest.Builder
avoiding the need to create one manually viaStartBgpFailoverTestRequest.builder()
- Parameters:
startBgpFailoverTestRequest
- AConsumer
that will call methods onStartBgpFailoverTestRequest.Builder
to create a request.- Returns:
- Result of the StartBgpFailoverTest operation returned by the service.
- See Also:
-
stopBgpFailoverTest
default StopBgpFailoverTestResponse stopBgpFailoverTest(StopBgpFailoverTestRequest stopBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Stops the virtual interface failover test.
- Parameters:
stopBgpFailoverTestRequest
-- Returns:
- Result of the StopBgpFailoverTest operation returned by the service.
- See Also:
-
stopBgpFailoverTest
default StopBgpFailoverTestResponse stopBgpFailoverTest(Consumer<StopBgpFailoverTestRequest.Builder> stopBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Stops the virtual interface failover test.
This is a convenience which creates an instance of the
StopBgpFailoverTestRequest.Builder
avoiding the need to create one manually viaStopBgpFailoverTestRequest.builder()
- Parameters:
stopBgpFailoverTestRequest
- AConsumer
that will call methods onStopBgpFailoverTestRequest.Builder
to create a request.- Returns:
- Result of the StopBgpFailoverTest operation returned by the service.
- See Also:
-
tagResource
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Adds the specified tags to the specified Direct Connect resource. Each resource can have a maximum of 50 tags.
Each tag consists of a key and an optional value. If a tag with the same key is already associated with the resource, this action updates its value.
- Parameters:
tagResourceRequest
-- Returns:
- Result of the TagResource operation returned by the service.
- See Also:
-
tagResource
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Adds the specified tags to the specified Direct Connect resource. Each resource can have a maximum of 50 tags.
Each tag consists of a key and an optional value. If a tag with the same key is already associated with the resource, this action updates its value.
This is a convenience which creates an instance of the
TagResourceRequest.Builder
avoiding the need to create one manually viaTagResourceRequest.builder()
- Parameters:
tagResourceRequest
- AConsumer
that will call methods onTagResourceRequest.Builder
to create a request.- Returns:
- Result of the TagResource operation returned by the service.
- See Also:
-
untagResource
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Removes one or more tags from the specified Direct Connect resource.
- Parameters:
untagResourceRequest
-- Returns:
- Result of the UntagResource operation returned by the service.
- See Also:
-
untagResource
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Removes one or more tags from the specified Direct Connect resource.
This is a convenience which creates an instance of the
UntagResourceRequest.Builder
avoiding the need to create one manually viaUntagResourceRequest.builder()
- Parameters:
untagResourceRequest
- AConsumer
that will call methods onUntagResourceRequest.Builder
to create a request.- Returns:
- Result of the UntagResource operation returned by the service.
- See Also:
-
updateConnection
default UpdateConnectionResponse updateConnection(UpdateConnectionRequest updateConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the Direct Connect dedicated connection configuration.
You can update the following parameters for a connection:
-
The connection name
-
The connection's MAC Security (MACsec) encryption mode.
- Parameters:
updateConnectionRequest
-- Returns:
- Result of the UpdateConnection operation returned by the service.
- See Also:
-
-
updateConnection
default UpdateConnectionResponse updateConnection(Consumer<UpdateConnectionRequest.Builder> updateConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the Direct Connect dedicated connection configuration.
You can update the following parameters for a connection:
-
The connection name
-
The connection's MAC Security (MACsec) encryption mode.
This is a convenience which creates an instance of the
UpdateConnectionRequest.Builder
avoiding the need to create one manually viaUpdateConnectionRequest.builder()
- Parameters:
updateConnectionRequest
- AConsumer
that will call methods onUpdateConnectionRequest.Builder
to create a request.- Returns:
- Result of the UpdateConnection operation returned by the service.
- See Also:
-
-
updateDirectConnectGateway
default UpdateDirectConnectGatewayResponse updateDirectConnectGateway(UpdateDirectConnectGatewayRequest updateDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the name of a current Direct Connect gateway.
- Parameters:
updateDirectConnectGatewayRequest
-- Returns:
- Result of the UpdateDirectConnectGateway operation returned by the service.
- See Also:
-
updateDirectConnectGateway
default UpdateDirectConnectGatewayResponse updateDirectConnectGateway(Consumer<UpdateDirectConnectGatewayRequest.Builder> updateDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the name of a current Direct Connect gateway.
This is a convenience which creates an instance of the
UpdateDirectConnectGatewayRequest.Builder
avoiding the need to create one manually viaUpdateDirectConnectGatewayRequest.builder()
- Parameters:
updateDirectConnectGatewayRequest
- AConsumer
that will call methods onUpdateDirectConnectGatewayRequest.Builder
to create a request.- Returns:
- Result of the UpdateDirectConnectGateway operation returned by the service.
- See Also:
-
updateDirectConnectGatewayAssociation
default UpdateDirectConnectGatewayAssociationResponse updateDirectConnectGatewayAssociation(UpdateDirectConnectGatewayAssociationRequest updateDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the specified attributes of the Direct Connect gateway association.
Add or remove prefixes from the association.
- Parameters:
updateDirectConnectGatewayAssociationRequest
-- Returns:
- Result of the UpdateDirectConnectGatewayAssociation operation returned by the service.
- See Also:
-
updateDirectConnectGatewayAssociation
default UpdateDirectConnectGatewayAssociationResponse updateDirectConnectGatewayAssociation(Consumer<UpdateDirectConnectGatewayAssociationRequest.Builder> updateDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the specified attributes of the Direct Connect gateway association.
Add or remove prefixes from the association.
This is a convenience which creates an instance of the
UpdateDirectConnectGatewayAssociationRequest.Builder
avoiding the need to create one manually viaUpdateDirectConnectGatewayAssociationRequest.builder()
- Parameters:
updateDirectConnectGatewayAssociationRequest
- AConsumer
that will call methods onUpdateDirectConnectGatewayAssociationRequest.Builder
to create a request.- Returns:
- Result of the UpdateDirectConnectGatewayAssociation operation returned by the service.
- See Also:
-
updateLag
default UpdateLagResponse updateLag(UpdateLagRequest updateLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the attributes of the specified link aggregation group (LAG).
You can update the following LAG attributes:
-
The name of the LAG.
-
The value for the minimum number of connections that must be operational for the LAG itself to be operational.
-
The LAG's MACsec encryption mode.
Amazon Web Services assigns this value to each connection which is part of the LAG.
-
The tags
If you adjust the threshold value for the minimum number of operational connections, ensure that the new value does not cause the LAG to fall below the threshold and become non-operational.
- Parameters:
updateLagRequest
-- Returns:
- Result of the UpdateLag operation returned by the service.
- See Also:
-
-
updateLag
default UpdateLagResponse updateLag(Consumer<UpdateLagRequest.Builder> updateLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the attributes of the specified link aggregation group (LAG).
You can update the following LAG attributes:
-
The name of the LAG.
-
The value for the minimum number of connections that must be operational for the LAG itself to be operational.
-
The LAG's MACsec encryption mode.
Amazon Web Services assigns this value to each connection which is part of the LAG.
-
The tags
If you adjust the threshold value for the minimum number of operational connections, ensure that the new value does not cause the LAG to fall below the threshold and become non-operational.
This is a convenience which creates an instance of the
UpdateLagRequest.Builder
avoiding the need to create one manually viaUpdateLagRequest.builder()
- Parameters:
updateLagRequest
- AConsumer
that will call methods onUpdateLagRequest.Builder
to create a request.- Returns:
- Result of the UpdateLag operation returned by the service.
- See Also:
-
-
updateVirtualInterfaceAttributes
default UpdateVirtualInterfaceAttributesResponse updateVirtualInterfaceAttributes(UpdateVirtualInterfaceAttributesRequest updateVirtualInterfaceAttributesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the specified attributes of the specified virtual private interface.
Setting the MTU of a virtual interface to 9001 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
- Parameters:
updateVirtualInterfaceAttributesRequest
-- Returns:
- Result of the UpdateVirtualInterfaceAttributes operation returned by the service.
- See Also:
-
updateVirtualInterfaceAttributes
default UpdateVirtualInterfaceAttributesResponse updateVirtualInterfaceAttributes(Consumer<UpdateVirtualInterfaceAttributesRequest.Builder> updateVirtualInterfaceAttributesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException Updates the specified attributes of the specified virtual private interface.
Setting the MTU of a virtual interface to 9001 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
This is a convenience which creates an instance of the
UpdateVirtualInterfaceAttributesRequest.Builder
avoiding the need to create one manually viaUpdateVirtualInterfaceAttributesRequest.builder()
- Parameters:
updateVirtualInterfaceAttributesRequest
- AConsumer
that will call methods onUpdateVirtualInterfaceAttributesRequest.Builder
to create a request.- Returns:
- Result of the UpdateVirtualInterfaceAttributes operation returned by the service.
- See Also:
-
create
Create aDirectConnectClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
. -
builder
Create a builder that can be used to configure and create aDirectConnectClient
. -
serviceMetadata
-
serviceClientConfiguration
Description copied from interface:SdkClient
The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration- Specified by:
serviceClientConfiguration
in interfaceAwsClient
- Specified by:
serviceClientConfiguration
in interfaceSdkClient
- Returns:
- SdkServiceClientConfiguration
-