Package software.amazon.awssdk.services.globalaccelerator

Interface GlobalAcceleratorAsyncClient

All Superinterfaces:
AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface GlobalAcceleratorAsyncClient extends AwsClient
Service client for accessing AWS Global Accelerator asynchronously. This can be created using the static builder() method.The asynchronous client performs non-blocking I/O when configured with any SdkAsyncHttpClient supported in the SDK. However, full non-blocking is not guaranteed as the async client may perform blocking calls in some cases such as credentials retrieval and endpoint discovery as part of the async API call. Global Accelerator

This is the Global Accelerator API Reference. This guide is for developers who need detailed information about Global Accelerator API actions, data types, and errors. For more information about Global Accelerator features, see the Global Accelerator Developer Guide.

Global Accelerator is a service in which you create accelerators to improve the performance of your applications for local and global users. Depending on the type of accelerator you choose, you can gain additional benefits.

  • By using a standard accelerator, you can improve availability of your internet applications that are used by a global audience. With a standard accelerator, Global Accelerator directs traffic to optimal endpoints over the Amazon Web Services global network.

  • For other scenarios, you might choose a custom routing accelerator. With a custom routing accelerator, you can use application logic to directly map one or more users to a specific endpoint among many endpoints.

Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.

By default, Global Accelerator provides you with static IP addresses that you associate with your accelerator. The static IP addresses are anycast from the Amazon Web Services edge network. For IPv4, Global Accelerator provides two static IPv4 addresses. For dual-stack, Global Accelerator provides a total of four addresses: two static IPv4 addresses and two static IPv6 addresses. With a standard accelerator for IPv4, instead of using the addresses that Global Accelerator provides, you can configure these entry points to be IPv4 addresses from your own IP address ranges that you bring to Global Accelerator (BYOIP).

For a standard accelerator, they distribute incoming application traffic across multiple endpoint resources in multiple Amazon Web Services Regions , which increases the availability of your applications. Endpoints for standard accelerators can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses that are located in one Amazon Web Services Region or multiple Amazon Web Services Regions. For custom routing accelerators, you map traffic that arrives to the static IP addresses to specific Amazon EC2 servers in endpoints that are virtual private cloud (VPC) subnets.

The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies like tag-based permissions with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Tag-based policies.

For standard accelerators, Global Accelerator uses the Amazon Web Services global network to route traffic to the optimal regional endpoint based on health, client location, and policies that you configure. The service reacts instantly to changes in health or configuration to ensure that internet traffic from clients is always directed to healthy endpoints.

For more information about understanding and using Global Accelerator, see the Global Accelerator Developer Guide.

  • Field Details

  • Method Details

    • addCustomRoutingEndpoints

      default CompletableFuture<AddCustomRoutingEndpointsResponse> addCustomRoutingEndpoints(AddCustomRoutingEndpointsRequest addCustomRoutingEndpointsRequest)

      Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.

      The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.

      Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.

      By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

      Parameters:
      addCustomRoutingEndpointsRequest -
      Returns:
      A Java Future containing the result of the AddCustomRoutingEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointAlreadyExistsException The endpoint that you specified doesn't exist.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • ConflictException You can't use both of those options.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • addCustomRoutingEndpoints

      default CompletableFuture<AddCustomRoutingEndpointsResponse> addCustomRoutingEndpoints(Consumer<AddCustomRoutingEndpointsRequest.Builder> addCustomRoutingEndpointsRequest)

      Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.

      The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.

      Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.

      By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.


      This is a convenience which creates an instance of the AddCustomRoutingEndpointsRequest.Builder avoiding the need to create one manually via AddCustomRoutingEndpointsRequest.builder()

      Parameters:
      addCustomRoutingEndpointsRequest - A Consumer that will call methods on AddCustomRoutingEndpointsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AddCustomRoutingEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointAlreadyExistsException The endpoint that you specified doesn't exist.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • ConflictException You can't use both of those options.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • addEndpoints

      default CompletableFuture<AddEndpointsResponse> addEndpoints(AddEndpointsRequest addEndpointsRequest)

      Add endpoints to an endpoint group. The AddEndpoints API operation is the recommended option for adding endpoints. The alternative options are to add endpoints when you create an endpoint group (with the CreateEndpointGroup API) or when you update an endpoint group (with the UpdateEndpointGroup API).

      There are two advantages to using AddEndpoints to add endpoints in Global Accelerator:

      • It's faster, because Global Accelerator only has to resolve the new endpoints that you're adding, rather than resolving new and existing endpoints.

      • It's more convenient, because you don't need to specify the current endpoints that are already in the endpoint group, in addition to the new endpoints that you want to add.

      For information about endpoint types and requirements for endpoints that you can add to Global Accelerator, see Endpoints for standard accelerators in the Global Accelerator Developer Guide.

      Parameters:
      addEndpointsRequest -
      Returns:
      A Java Future containing the result of the AddEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • addEndpoints

      default CompletableFuture<AddEndpointsResponse> addEndpoints(Consumer<AddEndpointsRequest.Builder> addEndpointsRequest)

      Add endpoints to an endpoint group. The AddEndpoints API operation is the recommended option for adding endpoints. The alternative options are to add endpoints when you create an endpoint group (with the CreateEndpointGroup API) or when you update an endpoint group (with the UpdateEndpointGroup API).

      There are two advantages to using AddEndpoints to add endpoints in Global Accelerator:

      • It's faster, because Global Accelerator only has to resolve the new endpoints that you're adding, rather than resolving new and existing endpoints.

      • It's more convenient, because you don't need to specify the current endpoints that are already in the endpoint group, in addition to the new endpoints that you want to add.

      For information about endpoint types and requirements for endpoints that you can add to Global Accelerator, see Endpoints for standard accelerators in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the AddEndpointsRequest.Builder avoiding the need to create one manually via AddEndpointsRequest.builder()

      Parameters:
      addEndpointsRequest - A Consumer that will call methods on AddEndpointsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AddEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • advertiseByoipCidr

      default CompletableFuture<AdvertiseByoipCidrResponse> advertiseByoipCidr(AdvertiseByoipCidrRequest advertiseByoipCidrRequest)

      Advertises an IPv4 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services because of propagation delays.

      To stop advertising the BYOIP address range, use WithdrawByoipCidr.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

      Parameters:
      advertiseByoipCidrRequest -
      Returns:
      A Java Future containing the result of the AdvertiseByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ByoipCidrNotFoundException The CIDR that you specified was not found or is incorrect.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • advertiseByoipCidr

      default CompletableFuture<AdvertiseByoipCidrResponse> advertiseByoipCidr(Consumer<AdvertiseByoipCidrRequest.Builder> advertiseByoipCidrRequest)

      Advertises an IPv4 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services because of propagation delays.

      To stop advertising the BYOIP address range, use WithdrawByoipCidr.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the AdvertiseByoipCidrRequest.Builder avoiding the need to create one manually via AdvertiseByoipCidrRequest.builder()

      Parameters:
      advertiseByoipCidrRequest - A Consumer that will call methods on AdvertiseByoipCidrRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AdvertiseByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ByoipCidrNotFoundException The CIDR that you specified was not found or is incorrect.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • allowCustomRoutingTraffic

      default CompletableFuture<AllowCustomRoutingTrafficResponse> allowCustomRoutingTraffic(AllowCustomRoutingTrafficRequest allowCustomRoutingTrafficRequest)

      Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

      After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

      Parameters:
      allowCustomRoutingTrafficRequest -
      Returns:
      A Java Future containing the result of the AllowCustomRoutingTraffic operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • allowCustomRoutingTraffic

      default CompletableFuture<AllowCustomRoutingTrafficResponse> allowCustomRoutingTraffic(Consumer<AllowCustomRoutingTrafficRequest.Builder> allowCustomRoutingTrafficRequest)

      Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

      After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.


      This is a convenience which creates an instance of the AllowCustomRoutingTrafficRequest.Builder avoiding the need to create one manually via AllowCustomRoutingTrafficRequest.builder()

      Parameters:
      allowCustomRoutingTrafficRequest - A Consumer that will call methods on AllowCustomRoutingTrafficRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AllowCustomRoutingTraffic operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createAccelerator

      default CompletableFuture<CreateAcceleratorResponse> createAccelerator(CreateAcceleratorRequest createAcceleratorRequest)

      Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

      Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.

      Parameters:
      createAcceleratorRequest -
      Returns:
      A Java Future containing the result of the CreateAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createAccelerator

      default CompletableFuture<CreateAcceleratorResponse> createAccelerator(Consumer<CreateAcceleratorRequest.Builder> createAcceleratorRequest)

      Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

      Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.


      This is a convenience which creates an instance of the CreateAcceleratorRequest.Builder avoiding the need to create one manually via CreateAcceleratorRequest.builder()

      Parameters:
      createAcceleratorRequest - A Consumer that will call methods on CreateAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCrossAccountAttachment

      default CompletableFuture<CreateCrossAccountAttachmentResponse> createCrossAccountAttachment(CreateCrossAccountAttachmentRequest createCrossAccountAttachmentRequest)

      Create a cross-account attachment in Global Accelerator. You create a cross-account attachment to specify the principals who have permission to work with resources in accelerators in their own account. You specify, in the same attachment, the resources that are shared.

      A principal can be an Amazon Web Services account number or the Amazon Resource Name (ARN) for an accelerator. For account numbers that are listed as principals, to work with a resource listed in the attachment, you must sign in to an account specified as a principal. Then, you can work with resources that are listed, with any of your accelerators. If an accelerator ARN is listed in the cross-account attachment as a principal, anyone with permission to make updates to the accelerator can work with resources that are listed in the attachment.

      Specify each principal and resource separately. To specify two CIDR address pools, list them individually under Resources, and so on. For a command line operation, for example, you might use a statement like the following:

      "Resources": [{"Cidr": "169.254.60.0/24"},{"Cidr": "169.254.59.0/24"}]

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      createCrossAccountAttachmentRequest -
      Returns:
      A Java Future containing the result of the CreateCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCrossAccountAttachment

      default CompletableFuture<CreateCrossAccountAttachmentResponse> createCrossAccountAttachment(Consumer<CreateCrossAccountAttachmentRequest.Builder> createCrossAccountAttachmentRequest)

      Create a cross-account attachment in Global Accelerator. You create a cross-account attachment to specify the principals who have permission to work with resources in accelerators in their own account. You specify, in the same attachment, the resources that are shared.

      A principal can be an Amazon Web Services account number or the Amazon Resource Name (ARN) for an accelerator. For account numbers that are listed as principals, to work with a resource listed in the attachment, you must sign in to an account specified as a principal. Then, you can work with resources that are listed, with any of your accelerators. If an accelerator ARN is listed in the cross-account attachment as a principal, anyone with permission to make updates to the accelerator can work with resources that are listed in the attachment.

      Specify each principal and resource separately. To specify two CIDR address pools, list them individually under Resources, and so on. For a command line operation, for example, you might use a statement like the following:

      "Resources": [{"Cidr": "169.254.60.0/24"},{"Cidr": "169.254.59.0/24"}]

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the CreateCrossAccountAttachmentRequest.Builder avoiding the need to create one manually via CreateCrossAccountAttachmentRequest.builder()

      Parameters:
      createCrossAccountAttachmentRequest - A Consumer that will call methods on CreateCrossAccountAttachmentRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCustomRoutingAccelerator

      default CompletableFuture<CreateCustomRoutingAcceleratorResponse> createCustomRoutingAccelerator(CreateCustomRoutingAcceleratorRequest createCustomRoutingAcceleratorRequest)

      Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.

      Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

      Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.

      Parameters:
      createCustomRoutingAcceleratorRequest -
      Returns:
      A Java Future containing the result of the CreateCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCustomRoutingAccelerator

      default CompletableFuture<CreateCustomRoutingAcceleratorResponse> createCustomRoutingAccelerator(Consumer<CreateCustomRoutingAcceleratorRequest.Builder> createCustomRoutingAcceleratorRequest)

      Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.

      Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

      Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.


      This is a convenience which creates an instance of the CreateCustomRoutingAcceleratorRequest.Builder avoiding the need to create one manually via CreateCustomRoutingAcceleratorRequest.builder()

      Parameters:
      createCustomRoutingAcceleratorRequest - A Consumer that will call methods on CreateCustomRoutingAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCustomRoutingEndpointGroup

      default CompletableFuture<CreateCustomRoutingEndpointGroupResponse> createCustomRoutingEndpointGroup(CreateCustomRoutingEndpointGroupRequest createCustomRoutingEndpointGroupRequest)

      Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one Amazon Web Services Region.

      Parameters:
      createCustomRoutingEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the CreateCustomRoutingEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • EndpointGroupAlreadyExistsException The endpoint group that you specified already exists.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCustomRoutingEndpointGroup

      default CompletableFuture<CreateCustomRoutingEndpointGroupResponse> createCustomRoutingEndpointGroup(Consumer<CreateCustomRoutingEndpointGroupRequest.Builder> createCustomRoutingEndpointGroupRequest)

      Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one Amazon Web Services Region.


      This is a convenience which creates an instance of the CreateCustomRoutingEndpointGroupRequest.Builder avoiding the need to create one manually via CreateCustomRoutingEndpointGroupRequest.builder()

      Parameters:
      createCustomRoutingEndpointGroupRequest - A Consumer that will call methods on CreateCustomRoutingEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateCustomRoutingEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • EndpointGroupAlreadyExistsException The endpoint group that you specified already exists.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCustomRoutingListener

      default CompletableFuture<CreateCustomRoutingListenerResponse> createCustomRoutingListener(CreateCustomRoutingListenerRequest createCustomRoutingListenerRequest)

      Create a listener to process inbound connections from clients to a custom routing accelerator. Connections arrive to assigned static IP addresses on the port range that you specify.

      Parameters:
      createCustomRoutingListenerRequest -
      Returns:
      A Java Future containing the result of the CreateCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createCustomRoutingListener

      default CompletableFuture<CreateCustomRoutingListenerResponse> createCustomRoutingListener(Consumer<CreateCustomRoutingListenerRequest.Builder> createCustomRoutingListenerRequest)

      Create a listener to process inbound connections from clients to a custom routing accelerator. Connections arrive to assigned static IP addresses on the port range that you specify.


      This is a convenience which creates an instance of the CreateCustomRoutingListenerRequest.Builder avoiding the need to create one manually via CreateCustomRoutingListenerRequest.builder()

      Parameters:
      createCustomRoutingListenerRequest - A Consumer that will call methods on CreateCustomRoutingListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createEndpointGroup

      default CompletableFuture<CreateEndpointGroupResponse> createEndpointGroup(CreateEndpointGroupRequest createEndpointGroupRequest)

      Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one Amazon Web Services Region. A resource must be valid and active when you add it as an endpoint.

      For more information about endpoint types and requirements for endpoints that you can add to Global Accelerator, see Endpoints for standard accelerators in the Global Accelerator Developer Guide.

      Parameters:
      createEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the CreateEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • EndpointGroupAlreadyExistsException The endpoint group that you specified already exists.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createEndpointGroup

      default CompletableFuture<CreateEndpointGroupResponse> createEndpointGroup(Consumer<CreateEndpointGroupRequest.Builder> createEndpointGroupRequest)

      Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one Amazon Web Services Region. A resource must be valid and active when you add it as an endpoint.

      For more information about endpoint types and requirements for endpoints that you can add to Global Accelerator, see Endpoints for standard accelerators in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the CreateEndpointGroupRequest.Builder avoiding the need to create one manually via CreateEndpointGroupRequest.builder()

      Parameters:
      createEndpointGroupRequest - A Consumer that will call methods on CreateEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • EndpointGroupAlreadyExistsException The endpoint group that you specified already exists.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createListener

      default CompletableFuture<CreateListenerResponse> createListener(CreateListenerRequest createListenerRequest)

      Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify.

      Parameters:
      createListenerRequest -
      Returns:
      A Java Future containing the result of the CreateListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createListener

      default CompletableFuture<CreateListenerResponse> createListener(Consumer<CreateListenerRequest.Builder> createListenerRequest)

      Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify.


      This is a convenience which creates an instance of the CreateListenerRequest.Builder avoiding the need to create one manually via CreateListenerRequest.builder()

      Parameters:
      createListenerRequest - A Consumer that will call methods on CreateListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteAccelerator

      default CompletableFuture<DeleteAcceleratorResponse> deleteAccelerator(DeleteAcceleratorRequest deleteAcceleratorRequest)

      Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

      When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.

      The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide.

      Parameters:
      deleteAcceleratorRequest -
      Returns:
      A Java Future containing the result of the DeleteAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • AcceleratorNotDisabledException The accelerator that you specified could not be disabled.
      • AssociatedListenerFoundException The accelerator that you specified has a listener associated with it. You must remove all dependent resources from an accelerator before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteAccelerator

      default CompletableFuture<DeleteAcceleratorResponse> deleteAccelerator(Consumer<DeleteAcceleratorRequest.Builder> deleteAcceleratorRequest)

      Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

      When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.

      The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the DeleteAcceleratorRequest.Builder avoiding the need to create one manually via DeleteAcceleratorRequest.builder()

      Parameters:
      deleteAcceleratorRequest - A Consumer that will call methods on DeleteAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • AcceleratorNotDisabledException The accelerator that you specified could not be disabled.
      • AssociatedListenerFoundException The accelerator that you specified has a listener associated with it. You must remove all dependent resources from an accelerator before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCrossAccountAttachment

      default CompletableFuture<DeleteCrossAccountAttachmentResponse> deleteCrossAccountAttachment(DeleteCrossAccountAttachmentRequest deleteCrossAccountAttachmentRequest)

      Delete a cross-account attachment. When you delete an attachment, Global Accelerator revokes the permission to use the resources in the attachment from all principals in the list of principals. Global Accelerator revokes the permission for specific resources.

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      deleteCrossAccountAttachmentRequest -
      Returns:
      A Java Future containing the result of the DeleteCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AttachmentNotFoundException No cross-account attachment was found.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCrossAccountAttachment

      default CompletableFuture<DeleteCrossAccountAttachmentResponse> deleteCrossAccountAttachment(Consumer<DeleteCrossAccountAttachmentRequest.Builder> deleteCrossAccountAttachmentRequest)

      Delete a cross-account attachment. When you delete an attachment, Global Accelerator revokes the permission to use the resources in the attachment from all principals in the list of principals. Global Accelerator revokes the permission for specific resources.

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the DeleteCrossAccountAttachmentRequest.Builder avoiding the need to create one manually via DeleteCrossAccountAttachmentRequest.builder()

      Parameters:
      deleteCrossAccountAttachmentRequest - A Consumer that will call methods on DeleteCrossAccountAttachmentRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AttachmentNotFoundException No cross-account attachment was found.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCustomRoutingAccelerator

      default CompletableFuture<DeleteCustomRoutingAcceleratorResponse> deleteCustomRoutingAccelerator(DeleteCustomRoutingAcceleratorRequest deleteCustomRoutingAcceleratorRequest)

      Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

      When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.

      The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide.

      Parameters:
      deleteCustomRoutingAcceleratorRequest -
      Returns:
      A Java Future containing the result of the DeleteCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • AcceleratorNotDisabledException The accelerator that you specified could not be disabled.
      • AssociatedListenerFoundException The accelerator that you specified has a listener associated with it. You must remove all dependent resources from an accelerator before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCustomRoutingAccelerator

      default CompletableFuture<DeleteCustomRoutingAcceleratorResponse> deleteCustomRoutingAccelerator(Consumer<DeleteCustomRoutingAcceleratorRequest.Builder> deleteCustomRoutingAcceleratorRequest)

      Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

      When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.

      The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the DeleteCustomRoutingAcceleratorRequest.Builder avoiding the need to create one manually via DeleteCustomRoutingAcceleratorRequest.builder()

      Parameters:
      deleteCustomRoutingAcceleratorRequest - A Consumer that will call methods on DeleteCustomRoutingAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • AcceleratorNotDisabledException The accelerator that you specified could not be disabled.
      • AssociatedListenerFoundException The accelerator that you specified has a listener associated with it. You must remove all dependent resources from an accelerator before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCustomRoutingEndpointGroup

      default CompletableFuture<DeleteCustomRoutingEndpointGroupResponse> deleteCustomRoutingEndpointGroup(DeleteCustomRoutingEndpointGroupRequest deleteCustomRoutingEndpointGroupRequest)

      Delete an endpoint group from a listener for a custom routing accelerator.

      Parameters:
      deleteCustomRoutingEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the DeleteCustomRoutingEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCustomRoutingEndpointGroup

      default CompletableFuture<DeleteCustomRoutingEndpointGroupResponse> deleteCustomRoutingEndpointGroup(Consumer<DeleteCustomRoutingEndpointGroupRequest.Builder> deleteCustomRoutingEndpointGroupRequest)

      Delete an endpoint group from a listener for a custom routing accelerator.


      This is a convenience which creates an instance of the DeleteCustomRoutingEndpointGroupRequest.Builder avoiding the need to create one manually via DeleteCustomRoutingEndpointGroupRequest.builder()

      Parameters:
      deleteCustomRoutingEndpointGroupRequest - A Consumer that will call methods on DeleteCustomRoutingEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteCustomRoutingEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCustomRoutingListener

      default CompletableFuture<DeleteCustomRoutingListenerResponse> deleteCustomRoutingListener(DeleteCustomRoutingListenerRequest deleteCustomRoutingListenerRequest)

      Delete a listener for a custom routing accelerator.

      Parameters:
      deleteCustomRoutingListenerRequest -
      Returns:
      A Java Future containing the result of the DeleteCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • AssociatedEndpointGroupFoundException The listener that you specified has an endpoint group associated with it. You must remove all dependent resources from a listener before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteCustomRoutingListener

      default CompletableFuture<DeleteCustomRoutingListenerResponse> deleteCustomRoutingListener(Consumer<DeleteCustomRoutingListenerRequest.Builder> deleteCustomRoutingListenerRequest)

      Delete a listener for a custom routing accelerator.


      This is a convenience which creates an instance of the DeleteCustomRoutingListenerRequest.Builder avoiding the need to create one manually via DeleteCustomRoutingListenerRequest.builder()

      Parameters:
      deleteCustomRoutingListenerRequest - A Consumer that will call methods on DeleteCustomRoutingListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • AssociatedEndpointGroupFoundException The listener that you specified has an endpoint group associated with it. You must remove all dependent resources from a listener before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteEndpointGroup

      default CompletableFuture<DeleteEndpointGroupResponse> deleteEndpointGroup(DeleteEndpointGroupRequest deleteEndpointGroupRequest)

      Delete an endpoint group from a listener.

      Parameters:
      deleteEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the DeleteEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteEndpointGroup

      default CompletableFuture<DeleteEndpointGroupResponse> deleteEndpointGroup(Consumer<DeleteEndpointGroupRequest.Builder> deleteEndpointGroupRequest)

      Delete an endpoint group from a listener.


      This is a convenience which creates an instance of the DeleteEndpointGroupRequest.Builder avoiding the need to create one manually via DeleteEndpointGroupRequest.builder()

      Parameters:
      deleteEndpointGroupRequest - A Consumer that will call methods on DeleteEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteListener

      default CompletableFuture<DeleteListenerResponse> deleteListener(DeleteListenerRequest deleteListenerRequest)

      Delete a listener from an accelerator.

      Parameters:
      deleteListenerRequest -
      Returns:
      A Java Future containing the result of the DeleteListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • AssociatedEndpointGroupFoundException The listener that you specified has an endpoint group associated with it. You must remove all dependent resources from a listener before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteListener

      default CompletableFuture<DeleteListenerResponse> deleteListener(Consumer<DeleteListenerRequest.Builder> deleteListenerRequest)

      Delete a listener from an accelerator.


      This is a convenience which creates an instance of the DeleteListenerRequest.Builder avoiding the need to create one manually via DeleteListenerRequest.builder()

      Parameters:
      deleteListenerRequest - A Consumer that will call methods on DeleteListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • AssociatedEndpointGroupFoundException The listener that you specified has an endpoint group associated with it. You must remove all dependent resources from a listener before you can delete it.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • denyCustomRoutingTraffic

      default CompletableFuture<DenyCustomRoutingTrafficResponse> denyCustomRoutingTraffic(DenyCustomRoutingTrafficRequest denyCustomRoutingTrafficRequest)

      Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that cannot receive traffic for a custom routing accelerator. You can deny traffic to all destinations in the VPC endpoint, or deny traffic to a specified list of destination IP addresses and ports. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

      After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

      Parameters:
      denyCustomRoutingTrafficRequest -
      Returns:
      A Java Future containing the result of the DenyCustomRoutingTraffic operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • denyCustomRoutingTraffic

      default CompletableFuture<DenyCustomRoutingTrafficResponse> denyCustomRoutingTraffic(Consumer<DenyCustomRoutingTrafficRequest.Builder> denyCustomRoutingTrafficRequest)

      Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that cannot receive traffic for a custom routing accelerator. You can deny traffic to all destinations in the VPC endpoint, or deny traffic to a specified list of destination IP addresses and ports. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

      After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.


      This is a convenience which creates an instance of the DenyCustomRoutingTrafficRequest.Builder avoiding the need to create one manually via DenyCustomRoutingTrafficRequest.builder()

      Parameters:
      denyCustomRoutingTrafficRequest - A Consumer that will call methods on DenyCustomRoutingTrafficRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DenyCustomRoutingTraffic operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deprovisionByoipCidr

      default CompletableFuture<DeprovisionByoipCidrResponse> deprovisionByoipCidr(DeprovisionByoipCidrRequest deprovisionByoipCidrRequest)

      Releases the specified address range that you provisioned to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.

      Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

      Parameters:
      deprovisionByoipCidrRequest -
      Returns:
      A Java Future containing the result of the DeprovisionByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ByoipCidrNotFoundException The CIDR that you specified was not found or is incorrect.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deprovisionByoipCidr

      default CompletableFuture<DeprovisionByoipCidrResponse> deprovisionByoipCidr(Consumer<DeprovisionByoipCidrRequest.Builder> deprovisionByoipCidrRequest)

      Releases the specified address range that you provisioned to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.

      Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the DeprovisionByoipCidrRequest.Builder avoiding the need to create one manually via DeprovisionByoipCidrRequest.builder()

      Parameters:
      deprovisionByoipCidrRequest - A Consumer that will call methods on DeprovisionByoipCidrRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeprovisionByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ByoipCidrNotFoundException The CIDR that you specified was not found or is incorrect.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeAccelerator

      default CompletableFuture<DescribeAcceleratorResponse> describeAccelerator(DescribeAcceleratorRequest describeAcceleratorRequest)

      Describe an accelerator.

      Parameters:
      describeAcceleratorRequest -
      Returns:
      A Java Future containing the result of the DescribeAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeAccelerator

      default CompletableFuture<DescribeAcceleratorResponse> describeAccelerator(Consumer<DescribeAcceleratorRequest.Builder> describeAcceleratorRequest)

      Describe an accelerator.


      This is a convenience which creates an instance of the DescribeAcceleratorRequest.Builder avoiding the need to create one manually via DescribeAcceleratorRequest.builder()

      Parameters:
      describeAcceleratorRequest - A Consumer that will call methods on DescribeAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeAcceleratorAttributes

      default CompletableFuture<DescribeAcceleratorAttributesResponse> describeAcceleratorAttributes(DescribeAcceleratorAttributesRequest describeAcceleratorAttributesRequest)

      Describe the attributes of an accelerator.

      Parameters:
      describeAcceleratorAttributesRequest -
      Returns:
      A Java Future containing the result of the DescribeAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeAcceleratorAttributes

      default CompletableFuture<DescribeAcceleratorAttributesResponse> describeAcceleratorAttributes(Consumer<DescribeAcceleratorAttributesRequest.Builder> describeAcceleratorAttributesRequest)

      Describe the attributes of an accelerator.


      This is a convenience which creates an instance of the DescribeAcceleratorAttributesRequest.Builder avoiding the need to create one manually via DescribeAcceleratorAttributesRequest.builder()

      Parameters:
      describeAcceleratorAttributesRequest - A Consumer that will call methods on DescribeAcceleratorAttributesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCrossAccountAttachment

      default CompletableFuture<DescribeCrossAccountAttachmentResponse> describeCrossAccountAttachment(DescribeCrossAccountAttachmentRequest describeCrossAccountAttachmentRequest)

      Gets configuration information about a cross-account attachment.

      Parameters:
      describeCrossAccountAttachmentRequest -
      Returns:
      A Java Future containing the result of the DescribeCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AttachmentNotFoundException No cross-account attachment was found.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCrossAccountAttachment

      default CompletableFuture<DescribeCrossAccountAttachmentResponse> describeCrossAccountAttachment(Consumer<DescribeCrossAccountAttachmentRequest.Builder> describeCrossAccountAttachmentRequest)

      Gets configuration information about a cross-account attachment.


      This is a convenience which creates an instance of the DescribeCrossAccountAttachmentRequest.Builder avoiding the need to create one manually via DescribeCrossAccountAttachmentRequest.builder()

      Parameters:
      describeCrossAccountAttachmentRequest - A Consumer that will call methods on DescribeCrossAccountAttachmentRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AttachmentNotFoundException No cross-account attachment was found.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingAccelerator

      default CompletableFuture<DescribeCustomRoutingAcceleratorResponse> describeCustomRoutingAccelerator(DescribeCustomRoutingAcceleratorRequest describeCustomRoutingAcceleratorRequest)

      Describe a custom routing accelerator.

      Parameters:
      describeCustomRoutingAcceleratorRequest -
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingAccelerator

      default CompletableFuture<DescribeCustomRoutingAcceleratorResponse> describeCustomRoutingAccelerator(Consumer<DescribeCustomRoutingAcceleratorRequest.Builder> describeCustomRoutingAcceleratorRequest)

      Describe a custom routing accelerator.


      This is a convenience which creates an instance of the DescribeCustomRoutingAcceleratorRequest.Builder avoiding the need to create one manually via DescribeCustomRoutingAcceleratorRequest.builder()

      Parameters:
      describeCustomRoutingAcceleratorRequest - A Consumer that will call methods on DescribeCustomRoutingAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingAcceleratorAttributes

      default CompletableFuture<DescribeCustomRoutingAcceleratorAttributesResponse> describeCustomRoutingAcceleratorAttributes(DescribeCustomRoutingAcceleratorAttributesRequest describeCustomRoutingAcceleratorAttributesRequest)

      Describe the attributes of a custom routing accelerator.

      Parameters:
      describeCustomRoutingAcceleratorAttributesRequest -
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingAcceleratorAttributes

      default CompletableFuture<DescribeCustomRoutingAcceleratorAttributesResponse> describeCustomRoutingAcceleratorAttributes(Consumer<DescribeCustomRoutingAcceleratorAttributesRequest.Builder> describeCustomRoutingAcceleratorAttributesRequest)

      Describe the attributes of a custom routing accelerator.


      This is a convenience which creates an instance of the DescribeCustomRoutingAcceleratorAttributesRequest.Builder avoiding the need to create one manually via DescribeCustomRoutingAcceleratorAttributesRequest.builder()

      Parameters:
      describeCustomRoutingAcceleratorAttributesRequest - A Consumer that will call methods on DescribeCustomRoutingAcceleratorAttributesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingEndpointGroup

      default CompletableFuture<DescribeCustomRoutingEndpointGroupResponse> describeCustomRoutingEndpointGroup(DescribeCustomRoutingEndpointGroupRequest describeCustomRoutingEndpointGroupRequest)

      Describe an endpoint group for a custom routing accelerator.

      Parameters:
      describeCustomRoutingEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingEndpointGroup

      default CompletableFuture<DescribeCustomRoutingEndpointGroupResponse> describeCustomRoutingEndpointGroup(Consumer<DescribeCustomRoutingEndpointGroupRequest.Builder> describeCustomRoutingEndpointGroupRequest)

      Describe an endpoint group for a custom routing accelerator.


      This is a convenience which creates an instance of the DescribeCustomRoutingEndpointGroupRequest.Builder avoiding the need to create one manually via DescribeCustomRoutingEndpointGroupRequest.builder()

      Parameters:
      describeCustomRoutingEndpointGroupRequest - A Consumer that will call methods on DescribeCustomRoutingEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingListener

      default CompletableFuture<DescribeCustomRoutingListenerResponse> describeCustomRoutingListener(DescribeCustomRoutingListenerRequest describeCustomRoutingListenerRequest)

      The description of a listener for a custom routing accelerator.

      Parameters:
      describeCustomRoutingListenerRequest -
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeCustomRoutingListener

      default CompletableFuture<DescribeCustomRoutingListenerResponse> describeCustomRoutingListener(Consumer<DescribeCustomRoutingListenerRequest.Builder> describeCustomRoutingListenerRequest)

      The description of a listener for a custom routing accelerator.


      This is a convenience which creates an instance of the DescribeCustomRoutingListenerRequest.Builder avoiding the need to create one manually via DescribeCustomRoutingListenerRequest.builder()

      Parameters:
      describeCustomRoutingListenerRequest - A Consumer that will call methods on DescribeCustomRoutingListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeEndpointGroup

      default CompletableFuture<DescribeEndpointGroupResponse> describeEndpointGroup(DescribeEndpointGroupRequest describeEndpointGroupRequest)

      Describe an endpoint group.

      Parameters:
      describeEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the DescribeEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeEndpointGroup

      default CompletableFuture<DescribeEndpointGroupResponse> describeEndpointGroup(Consumer<DescribeEndpointGroupRequest.Builder> describeEndpointGroupRequest)

      Describe an endpoint group.


      This is a convenience which creates an instance of the DescribeEndpointGroupRequest.Builder avoiding the need to create one manually via DescribeEndpointGroupRequest.builder()

      Parameters:
      describeEndpointGroupRequest - A Consumer that will call methods on DescribeEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeListener

      default CompletableFuture<DescribeListenerResponse> describeListener(DescribeListenerRequest describeListenerRequest)

      Describe a listener.

      Parameters:
      describeListenerRequest -
      Returns:
      A Java Future containing the result of the DescribeListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeListener

      default CompletableFuture<DescribeListenerResponse> describeListener(Consumer<DescribeListenerRequest.Builder> describeListenerRequest)

      Describe a listener.


      This is a convenience which creates an instance of the DescribeListenerRequest.Builder avoiding the need to create one manually via DescribeListenerRequest.builder()

      Parameters:
      describeListenerRequest - A Consumer that will call methods on DescribeListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAccelerators

      default CompletableFuture<ListAcceleratorsResponse> listAccelerators(ListAcceleratorsRequest listAcceleratorsRequest)

      List the accelerators for an Amazon Web Services account.

      Parameters:
      listAcceleratorsRequest -
      Returns:
      A Java Future containing the result of the ListAccelerators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAccelerators

      default CompletableFuture<ListAcceleratorsResponse> listAccelerators(Consumer<ListAcceleratorsRequest.Builder> listAcceleratorsRequest)

      List the accelerators for an Amazon Web Services account.


      This is a convenience which creates an instance of the ListAcceleratorsRequest.Builder avoiding the need to create one manually via ListAcceleratorsRequest.builder()

      Parameters:
      listAcceleratorsRequest - A Consumer that will call methods on ListAcceleratorsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListAccelerators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAccelerators

      default CompletableFuture<ListAcceleratorsResponse> listAccelerators()

      List the accelerators for an Amazon Web Services account.

      Returns:
      A Java Future containing the result of the ListAccelerators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAcceleratorsPaginator

      default ListAcceleratorsPublisher listAcceleratorsPaginator()

      This is a variant of listAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListAcceleratorsPublisher publisher = client.listAcceleratorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListAcceleratorsPublisher publisher = client.listAcceleratorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsRequest) operation.

      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAcceleratorsPaginator

      default ListAcceleratorsPublisher listAcceleratorsPaginator(ListAcceleratorsRequest listAcceleratorsRequest)

      This is a variant of listAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListAcceleratorsPublisher publisher = client.listAcceleratorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListAcceleratorsPublisher publisher = client.listAcceleratorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsRequest) operation.

      Parameters:
      listAcceleratorsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAcceleratorsPaginator

      default ListAcceleratorsPublisher listAcceleratorsPaginator(Consumer<ListAcceleratorsRequest.Builder> listAcceleratorsRequest)

      This is a variant of listAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListAcceleratorsPublisher publisher = client.listAcceleratorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListAcceleratorsPublisher publisher = client.listAcceleratorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListAcceleratorsRequest) operation.


      This is a convenience which creates an instance of the ListAcceleratorsRequest.Builder avoiding the need to create one manually via ListAcceleratorsRequest.builder()

      Parameters:
      listAcceleratorsRequest - A Consumer that will call methods on ListAcceleratorsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listByoipCidrs

      default CompletableFuture<ListByoipCidrsResponse> listByoipCidrs(ListByoipCidrsRequest listByoipCidrsRequest)

      Lists the IP address ranges that were specified in calls to ProvisionByoipCidr, including the current state and a history of state changes.

      Parameters:
      listByoipCidrsRequest -
      Returns:
      A Java Future containing the result of the ListByoipCidrs operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • InvalidNextTokenException There isn't another item to return.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listByoipCidrs

      default CompletableFuture<ListByoipCidrsResponse> listByoipCidrs(Consumer<ListByoipCidrsRequest.Builder> listByoipCidrsRequest)

      Lists the IP address ranges that were specified in calls to ProvisionByoipCidr, including the current state and a history of state changes.


      This is a convenience which creates an instance of the ListByoipCidrsRequest.Builder avoiding the need to create one manually via ListByoipCidrsRequest.builder()

      Parameters:
      listByoipCidrsRequest - A Consumer that will call methods on ListByoipCidrsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListByoipCidrs operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • InvalidNextTokenException There isn't another item to return.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listByoipCidrsPaginator

      default ListByoipCidrsPublisher listByoipCidrsPaginator(ListByoipCidrsRequest listByoipCidrsRequest)

      This is a variant of listByoipCidrs(software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListByoipCidrsPublisher publisher = client.listByoipCidrsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListByoipCidrsPublisher publisher = client.listByoipCidrsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listByoipCidrs(software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsRequest) operation.

      Parameters:
      listByoipCidrsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • InvalidNextTokenException There isn't another item to return.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listByoipCidrsPaginator

      default ListByoipCidrsPublisher listByoipCidrsPaginator(Consumer<ListByoipCidrsRequest.Builder> listByoipCidrsRequest)

      This is a variant of listByoipCidrs(software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListByoipCidrsPublisher publisher = client.listByoipCidrsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListByoipCidrsPublisher publisher = client.listByoipCidrsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listByoipCidrs(software.amazon.awssdk.services.globalaccelerator.model.ListByoipCidrsRequest) operation.


      This is a convenience which creates an instance of the ListByoipCidrsRequest.Builder avoiding the need to create one manually via ListByoipCidrsRequest.builder()

      Parameters:
      listByoipCidrsRequest - A Consumer that will call methods on ListByoipCidrsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • InvalidNextTokenException There isn't another item to return.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountAttachments

      default CompletableFuture<ListCrossAccountAttachmentsResponse> listCrossAccountAttachments(ListCrossAccountAttachmentsRequest listCrossAccountAttachmentsRequest)

      List the cross-account attachments that have been created in Global Accelerator.

      Parameters:
      listCrossAccountAttachmentsRequest -
      Returns:
      A Java Future containing the result of the ListCrossAccountAttachments operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AccessDeniedException You don't have access permission.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountAttachments

      default CompletableFuture<ListCrossAccountAttachmentsResponse> listCrossAccountAttachments(Consumer<ListCrossAccountAttachmentsRequest.Builder> listCrossAccountAttachmentsRequest)

      List the cross-account attachments that have been created in Global Accelerator.


      This is a convenience which creates an instance of the ListCrossAccountAttachmentsRequest.Builder avoiding the need to create one manually via ListCrossAccountAttachmentsRequest.builder()

      Parameters:
      listCrossAccountAttachmentsRequest - A Consumer that will call methods on ListCrossAccountAttachmentsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCrossAccountAttachments operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AccessDeniedException You don't have access permission.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountAttachmentsPaginator

      default ListCrossAccountAttachmentsPublisher listCrossAccountAttachmentsPaginator(ListCrossAccountAttachmentsRequest listCrossAccountAttachmentsRequest)

      This is a variant of listCrossAccountAttachments(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountAttachmentsPublisher publisher = client.listCrossAccountAttachmentsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountAttachmentsPublisher publisher = client.listCrossAccountAttachmentsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCrossAccountAttachments(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsRequest) operation.

      Parameters:
      listCrossAccountAttachmentsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AccessDeniedException You don't have access permission.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountAttachmentsPaginator

      default ListCrossAccountAttachmentsPublisher listCrossAccountAttachmentsPaginator(Consumer<ListCrossAccountAttachmentsRequest.Builder> listCrossAccountAttachmentsRequest)

      This is a variant of listCrossAccountAttachments(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountAttachmentsPublisher publisher = client.listCrossAccountAttachmentsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountAttachmentsPublisher publisher = client.listCrossAccountAttachmentsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCrossAccountAttachments(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountAttachmentsRequest) operation.


      This is a convenience which creates an instance of the ListCrossAccountAttachmentsRequest.Builder avoiding the need to create one manually via ListCrossAccountAttachmentsRequest.builder()

      Parameters:
      listCrossAccountAttachmentsRequest - A Consumer that will call methods on ListCrossAccountAttachmentsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AccessDeniedException You don't have access permission.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountResourceAccounts

      default CompletableFuture<ListCrossAccountResourceAccountsResponse> listCrossAccountResourceAccounts(ListCrossAccountResourceAccountsRequest listCrossAccountResourceAccountsRequest)

      List the accounts that have cross-account resources.

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      listCrossAccountResourceAccountsRequest -
      Returns:
      A Java Future containing the result of the ListCrossAccountResourceAccounts operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountResourceAccounts

      default CompletableFuture<ListCrossAccountResourceAccountsResponse> listCrossAccountResourceAccounts(Consumer<ListCrossAccountResourceAccountsRequest.Builder> listCrossAccountResourceAccountsRequest)

      List the accounts that have cross-account resources.

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the ListCrossAccountResourceAccountsRequest.Builder avoiding the need to create one manually via ListCrossAccountResourceAccountsRequest.builder()

      Parameters:
      listCrossAccountResourceAccountsRequest - A Consumer that will call methods on ListCrossAccountResourceAccountsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCrossAccountResourceAccounts operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountResources

      default CompletableFuture<ListCrossAccountResourcesResponse> listCrossAccountResources(ListCrossAccountResourcesRequest listCrossAccountResourcesRequest)

      List the cross-account resources available to work with.

      Parameters:
      listCrossAccountResourcesRequest -
      Returns:
      A Java Future containing the result of the ListCrossAccountResources operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • AccessDeniedException You don't have access permission.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountResources

      default CompletableFuture<ListCrossAccountResourcesResponse> listCrossAccountResources(Consumer<ListCrossAccountResourcesRequest.Builder> listCrossAccountResourcesRequest)

      List the cross-account resources available to work with.


      This is a convenience which creates an instance of the ListCrossAccountResourcesRequest.Builder avoiding the need to create one manually via ListCrossAccountResourcesRequest.builder()

      Parameters:
      listCrossAccountResourcesRequest - A Consumer that will call methods on ListCrossAccountResourcesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCrossAccountResources operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • AccessDeniedException You don't have access permission.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountResourcesPaginator

      default ListCrossAccountResourcesPublisher listCrossAccountResourcesPaginator(ListCrossAccountResourcesRequest listCrossAccountResourcesRequest)

      This is a variant of listCrossAccountResources(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountResourcesPublisher publisher = client.listCrossAccountResourcesPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountResourcesPublisher publisher = client.listCrossAccountResourcesPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCrossAccountResources(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesRequest) operation.

      Parameters:
      listCrossAccountResourcesRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • AccessDeniedException You don't have access permission.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCrossAccountResourcesPaginator

      default ListCrossAccountResourcesPublisher listCrossAccountResourcesPaginator(Consumer<ListCrossAccountResourcesRequest.Builder> listCrossAccountResourcesRequest)

      This is a variant of listCrossAccountResources(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountResourcesPublisher publisher = client.listCrossAccountResourcesPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCrossAccountResourcesPublisher publisher = client.listCrossAccountResourcesPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCrossAccountResources(software.amazon.awssdk.services.globalaccelerator.model.ListCrossAccountResourcesRequest) operation.


      This is a convenience which creates an instance of the ListCrossAccountResourcesRequest.Builder avoiding the need to create one manually via ListCrossAccountResourcesRequest.builder()

      Parameters:
      listCrossAccountResourcesRequest - A Consumer that will call methods on ListCrossAccountResourcesRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • AccessDeniedException You don't have access permission.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingAccelerators

      default CompletableFuture<ListCustomRoutingAcceleratorsResponse> listCustomRoutingAccelerators(ListCustomRoutingAcceleratorsRequest listCustomRoutingAcceleratorsRequest)

      List the custom routing accelerators for an Amazon Web Services account.

      Parameters:
      listCustomRoutingAcceleratorsRequest -
      Returns:
      A Java Future containing the result of the ListCustomRoutingAccelerators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingAccelerators

      default CompletableFuture<ListCustomRoutingAcceleratorsResponse> listCustomRoutingAccelerators(Consumer<ListCustomRoutingAcceleratorsRequest.Builder> listCustomRoutingAcceleratorsRequest)

      List the custom routing accelerators for an Amazon Web Services account.


      This is a convenience which creates an instance of the ListCustomRoutingAcceleratorsRequest.Builder avoiding the need to create one manually via ListCustomRoutingAcceleratorsRequest.builder()

      Parameters:
      listCustomRoutingAcceleratorsRequest - A Consumer that will call methods on ListCustomRoutingAcceleratorsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCustomRoutingAccelerators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingAcceleratorsPaginator

      default ListCustomRoutingAcceleratorsPublisher listCustomRoutingAcceleratorsPaginator(ListCustomRoutingAcceleratorsRequest listCustomRoutingAcceleratorsRequest)

      This is a variant of listCustomRoutingAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingAcceleratorsPublisher publisher = client.listCustomRoutingAcceleratorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingAcceleratorsPublisher publisher = client.listCustomRoutingAcceleratorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsRequest) operation.

      Parameters:
      listCustomRoutingAcceleratorsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingAcceleratorsPaginator

      default ListCustomRoutingAcceleratorsPublisher listCustomRoutingAcceleratorsPaginator(Consumer<ListCustomRoutingAcceleratorsRequest.Builder> listCustomRoutingAcceleratorsRequest)

      This is a variant of listCustomRoutingAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingAcceleratorsPublisher publisher = client.listCustomRoutingAcceleratorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingAcceleratorsPublisher publisher = client.listCustomRoutingAcceleratorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingAccelerators(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingAcceleratorsRequest) operation.


      This is a convenience which creates an instance of the ListCustomRoutingAcceleratorsRequest.Builder avoiding the need to create one manually via ListCustomRoutingAcceleratorsRequest.builder()

      Parameters:
      listCustomRoutingAcceleratorsRequest - A Consumer that will call methods on ListCustomRoutingAcceleratorsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingEndpointGroups

      default CompletableFuture<ListCustomRoutingEndpointGroupsResponse> listCustomRoutingEndpointGroups(ListCustomRoutingEndpointGroupsRequest listCustomRoutingEndpointGroupsRequest)

      List the endpoint groups that are associated with a listener for a custom routing accelerator.

      Parameters:
      listCustomRoutingEndpointGroupsRequest -
      Returns:
      A Java Future containing the result of the ListCustomRoutingEndpointGroups operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingEndpointGroups

      default CompletableFuture<ListCustomRoutingEndpointGroupsResponse> listCustomRoutingEndpointGroups(Consumer<ListCustomRoutingEndpointGroupsRequest.Builder> listCustomRoutingEndpointGroupsRequest)

      List the endpoint groups that are associated with a listener for a custom routing accelerator.


      This is a convenience which creates an instance of the ListCustomRoutingEndpointGroupsRequest.Builder avoiding the need to create one manually via ListCustomRoutingEndpointGroupsRequest.builder()

      Parameters:
      listCustomRoutingEndpointGroupsRequest - A Consumer that will call methods on ListCustomRoutingEndpointGroupsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCustomRoutingEndpointGroups operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingEndpointGroupsPaginator

      default ListCustomRoutingEndpointGroupsPublisher listCustomRoutingEndpointGroupsPaginator(ListCustomRoutingEndpointGroupsRequest listCustomRoutingEndpointGroupsRequest)

      This is a variant of listCustomRoutingEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingEndpointGroupsPublisher publisher = client.listCustomRoutingEndpointGroupsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingEndpointGroupsPublisher publisher = client.listCustomRoutingEndpointGroupsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsRequest) operation.

      Parameters:
      listCustomRoutingEndpointGroupsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingEndpointGroupsPaginator

      default ListCustomRoutingEndpointGroupsPublisher listCustomRoutingEndpointGroupsPaginator(Consumer<ListCustomRoutingEndpointGroupsRequest.Builder> listCustomRoutingEndpointGroupsRequest)

      This is a variant of listCustomRoutingEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingEndpointGroupsPublisher publisher = client.listCustomRoutingEndpointGroupsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingEndpointGroupsPublisher publisher = client.listCustomRoutingEndpointGroupsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingEndpointGroupsRequest) operation.


      This is a convenience which creates an instance of the ListCustomRoutingEndpointGroupsRequest.Builder avoiding the need to create one manually via ListCustomRoutingEndpointGroupsRequest.builder()

      Parameters:
      listCustomRoutingEndpointGroupsRequest - A Consumer that will call methods on ListCustomRoutingEndpointGroupsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingListeners

      default CompletableFuture<ListCustomRoutingListenersResponse> listCustomRoutingListeners(ListCustomRoutingListenersRequest listCustomRoutingListenersRequest)

      List the listeners for a custom routing accelerator.

      Parameters:
      listCustomRoutingListenersRequest -
      Returns:
      A Java Future containing the result of the ListCustomRoutingListeners operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingListeners

      default CompletableFuture<ListCustomRoutingListenersResponse> listCustomRoutingListeners(Consumer<ListCustomRoutingListenersRequest.Builder> listCustomRoutingListenersRequest)

      List the listeners for a custom routing accelerator.


      This is a convenience which creates an instance of the ListCustomRoutingListenersRequest.Builder avoiding the need to create one manually via ListCustomRoutingListenersRequest.builder()

      Parameters:
      listCustomRoutingListenersRequest - A Consumer that will call methods on ListCustomRoutingListenersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCustomRoutingListeners operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingListenersPaginator

      default ListCustomRoutingListenersPublisher listCustomRoutingListenersPaginator(ListCustomRoutingListenersRequest listCustomRoutingListenersRequest)

      This is a variant of listCustomRoutingListeners(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingListenersPublisher publisher = client.listCustomRoutingListenersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingListenersPublisher publisher = client.listCustomRoutingListenersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingListeners(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersRequest) operation.

      Parameters:
      listCustomRoutingListenersRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingListenersPaginator

      default ListCustomRoutingListenersPublisher listCustomRoutingListenersPaginator(Consumer<ListCustomRoutingListenersRequest.Builder> listCustomRoutingListenersRequest)

      This is a variant of listCustomRoutingListeners(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingListenersPublisher publisher = client.listCustomRoutingListenersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingListenersPublisher publisher = client.listCustomRoutingListenersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingListeners(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingListenersRequest) operation.


      This is a convenience which creates an instance of the ListCustomRoutingListenersRequest.Builder avoiding the need to create one manually via ListCustomRoutingListenersRequest.builder()

      Parameters:
      listCustomRoutingListenersRequest - A Consumer that will call methods on ListCustomRoutingListenersRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappings

      default CompletableFuture<ListCustomRoutingPortMappingsResponse> listCustomRoutingPortMappings(ListCustomRoutingPortMappingsRequest listCustomRoutingPortMappingsRequest)

      Provides a complete mapping from the public accelerator IP address and port to destination EC2 instance IP addresses and ports in the virtual public cloud (VPC) subnet endpoint for a custom routing accelerator. For each subnet endpoint that you add, Global Accelerator creates a new static port mapping for the accelerator. The port mappings don't change after Global Accelerator generates them, so you can retrieve and cache the full mapping on your servers.

      If you remove a subnet from your accelerator, Global Accelerator removes (reclaims) the port mappings. If you add a subnet to your accelerator, Global Accelerator creates new port mappings (the existing ones don't change). If you add or remove EC2 instances in your subnet, the port mappings don't change, because the mappings are created when you add the subnet to Global Accelerator.

      The mappings also include a flag for each destination denoting which destination IP addresses and ports are allowed or denied traffic.

      Parameters:
      listCustomRoutingPortMappingsRequest -
      Returns:
      A Java Future containing the result of the ListCustomRoutingPortMappings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappings

      default CompletableFuture<ListCustomRoutingPortMappingsResponse> listCustomRoutingPortMappings(Consumer<ListCustomRoutingPortMappingsRequest.Builder> listCustomRoutingPortMappingsRequest)

      Provides a complete mapping from the public accelerator IP address and port to destination EC2 instance IP addresses and ports in the virtual public cloud (VPC) subnet endpoint for a custom routing accelerator. For each subnet endpoint that you add, Global Accelerator creates a new static port mapping for the accelerator. The port mappings don't change after Global Accelerator generates them, so you can retrieve and cache the full mapping on your servers.

      If you remove a subnet from your accelerator, Global Accelerator removes (reclaims) the port mappings. If you add a subnet to your accelerator, Global Accelerator creates new port mappings (the existing ones don't change). If you add or remove EC2 instances in your subnet, the port mappings don't change, because the mappings are created when you add the subnet to Global Accelerator.

      The mappings also include a flag for each destination denoting which destination IP addresses and ports are allowed or denied traffic.


      This is a convenience which creates an instance of the ListCustomRoutingPortMappingsRequest.Builder avoiding the need to create one manually via ListCustomRoutingPortMappingsRequest.builder()

      Parameters:
      listCustomRoutingPortMappingsRequest - A Consumer that will call methods on ListCustomRoutingPortMappingsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCustomRoutingPortMappings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappingsByDestination

      default CompletableFuture<ListCustomRoutingPortMappingsByDestinationResponse> listCustomRoutingPortMappingsByDestination(ListCustomRoutingPortMappingsByDestinationRequest listCustomRoutingPortMappingsByDestinationRequest)

      List the port mappings for a specific EC2 instance (destination) in a VPC subnet endpoint. The response is the mappings for one destination IP address. This is useful when your subnet endpoint has mappings that span multiple custom routing accelerators in your account, or for scenarios where you only want to list the port mappings for a specific destination instance.

      Parameters:
      listCustomRoutingPortMappingsByDestinationRequest -
      Returns:
      A Java Future containing the result of the ListCustomRoutingPortMappingsByDestination operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointNotFoundException The endpoint that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappingsByDestination

      default CompletableFuture<ListCustomRoutingPortMappingsByDestinationResponse> listCustomRoutingPortMappingsByDestination(Consumer<ListCustomRoutingPortMappingsByDestinationRequest.Builder> listCustomRoutingPortMappingsByDestinationRequest)

      List the port mappings for a specific EC2 instance (destination) in a VPC subnet endpoint. The response is the mappings for one destination IP address. This is useful when your subnet endpoint has mappings that span multiple custom routing accelerators in your account, or for scenarios where you only want to list the port mappings for a specific destination instance.


      This is a convenience which creates an instance of the ListCustomRoutingPortMappingsByDestinationRequest.Builder avoiding the need to create one manually via ListCustomRoutingPortMappingsByDestinationRequest.builder()

      Parameters:
      listCustomRoutingPortMappingsByDestinationRequest - A Consumer that will call methods on ListCustomRoutingPortMappingsByDestinationRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListCustomRoutingPortMappingsByDestination operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointNotFoundException The endpoint that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappingsByDestinationPaginator

      default ListCustomRoutingPortMappingsByDestinationPublisher listCustomRoutingPortMappingsByDestinationPaginator(ListCustomRoutingPortMappingsByDestinationRequest listCustomRoutingPortMappingsByDestinationRequest)

      This is a variant of listCustomRoutingPortMappingsByDestination(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsByDestinationPublisher publisher = client.listCustomRoutingPortMappingsByDestinationPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsByDestinationPublisher publisher = client.listCustomRoutingPortMappingsByDestinationPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingPortMappingsByDestination(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationRequest) operation.

      Parameters:
      listCustomRoutingPortMappingsByDestinationRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointNotFoundException The endpoint that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappingsByDestinationPaginator

      default ListCustomRoutingPortMappingsByDestinationPublisher listCustomRoutingPortMappingsByDestinationPaginator(Consumer<ListCustomRoutingPortMappingsByDestinationRequest.Builder> listCustomRoutingPortMappingsByDestinationRequest)

      This is a variant of listCustomRoutingPortMappingsByDestination(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsByDestinationPublisher publisher = client.listCustomRoutingPortMappingsByDestinationPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsByDestinationPublisher publisher = client.listCustomRoutingPortMappingsByDestinationPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingPortMappingsByDestination(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsByDestinationRequest) operation.


      This is a convenience which creates an instance of the ListCustomRoutingPortMappingsByDestinationRequest.Builder avoiding the need to create one manually via ListCustomRoutingPortMappingsByDestinationRequest.builder()

      Parameters:
      listCustomRoutingPortMappingsByDestinationRequest - A Consumer that will call methods on ListCustomRoutingPortMappingsByDestinationRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointNotFoundException The endpoint that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappingsPaginator

      default ListCustomRoutingPortMappingsPublisher listCustomRoutingPortMappingsPaginator(ListCustomRoutingPortMappingsRequest listCustomRoutingPortMappingsRequest)

      This is a variant of listCustomRoutingPortMappings(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsPublisher publisher = client.listCustomRoutingPortMappingsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsPublisher publisher = client.listCustomRoutingPortMappingsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingPortMappings(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsRequest) operation.

      Parameters:
      listCustomRoutingPortMappingsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listCustomRoutingPortMappingsPaginator

      default ListCustomRoutingPortMappingsPublisher listCustomRoutingPortMappingsPaginator(Consumer<ListCustomRoutingPortMappingsRequest.Builder> listCustomRoutingPortMappingsRequest)

      This is a variant of listCustomRoutingPortMappings(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsPublisher publisher = client.listCustomRoutingPortMappingsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListCustomRoutingPortMappingsPublisher publisher = client.listCustomRoutingPortMappingsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listCustomRoutingPortMappings(software.amazon.awssdk.services.globalaccelerator.model.ListCustomRoutingPortMappingsRequest) operation.


      This is a convenience which creates an instance of the ListCustomRoutingPortMappingsRequest.Builder avoiding the need to create one manually via ListCustomRoutingPortMappingsRequest.builder()

      Parameters:
      listCustomRoutingPortMappingsRequest - A Consumer that will call methods on ListCustomRoutingPortMappingsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidNextTokenException There isn't another item to return.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEndpointGroups

      default CompletableFuture<ListEndpointGroupsResponse> listEndpointGroups(ListEndpointGroupsRequest listEndpointGroupsRequest)

      List the endpoint groups that are associated with a listener.

      Parameters:
      listEndpointGroupsRequest -
      Returns:
      A Java Future containing the result of the ListEndpointGroups operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEndpointGroups

      default CompletableFuture<ListEndpointGroupsResponse> listEndpointGroups(Consumer<ListEndpointGroupsRequest.Builder> listEndpointGroupsRequest)

      List the endpoint groups that are associated with a listener.


      This is a convenience which creates an instance of the ListEndpointGroupsRequest.Builder avoiding the need to create one manually via ListEndpointGroupsRequest.builder()

      Parameters:
      listEndpointGroupsRequest - A Consumer that will call methods on ListEndpointGroupsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListEndpointGroups operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEndpointGroupsPaginator

      default ListEndpointGroupsPublisher listEndpointGroupsPaginator(ListEndpointGroupsRequest listEndpointGroupsRequest)

      This is a variant of listEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListEndpointGroupsPublisher publisher = client.listEndpointGroupsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListEndpointGroupsPublisher publisher = client.listEndpointGroupsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsRequest) operation.

      Parameters:
      listEndpointGroupsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEndpointGroupsPaginator

      default ListEndpointGroupsPublisher listEndpointGroupsPaginator(Consumer<ListEndpointGroupsRequest.Builder> listEndpointGroupsRequest)

      This is a variant of listEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListEndpointGroupsPublisher publisher = client.listEndpointGroupsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListEndpointGroupsPublisher publisher = client.listEndpointGroupsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listEndpointGroups(software.amazon.awssdk.services.globalaccelerator.model.ListEndpointGroupsRequest) operation.


      This is a convenience which creates an instance of the ListEndpointGroupsRequest.Builder avoiding the need to create one manually via ListEndpointGroupsRequest.builder()

      Parameters:
      listEndpointGroupsRequest - A Consumer that will call methods on ListEndpointGroupsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InvalidArgumentException An argument that you specified is invalid.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listListeners

      default CompletableFuture<ListListenersResponse> listListeners(ListListenersRequest listListenersRequest)

      List the listeners for an accelerator.

      Parameters:
      listListenersRequest -
      Returns:
      A Java Future containing the result of the ListListeners operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listListeners

      default CompletableFuture<ListListenersResponse> listListeners(Consumer<ListListenersRequest.Builder> listListenersRequest)

      List the listeners for an accelerator.


      This is a convenience which creates an instance of the ListListenersRequest.Builder avoiding the need to create one manually via ListListenersRequest.builder()

      Parameters:
      listListenersRequest - A Consumer that will call methods on ListListenersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListListeners operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listListenersPaginator

      default ListListenersPublisher listListenersPaginator(ListListenersRequest listListenersRequest)

      This is a variant of listListeners(software.amazon.awssdk.services.globalaccelerator.model.ListListenersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListListenersPublisher publisher = client.listListenersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListListenersPublisher publisher = client.listListenersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListListenersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListListenersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listListeners(software.amazon.awssdk.services.globalaccelerator.model.ListListenersRequest) operation.

      Parameters:
      listListenersRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listListenersPaginator

      default ListListenersPublisher listListenersPaginator(Consumer<ListListenersRequest.Builder> listListenersRequest)

      This is a variant of listListeners(software.amazon.awssdk.services.globalaccelerator.model.ListListenersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListListenersPublisher publisher = client.listListenersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.globalaccelerator.paginators.ListListenersPublisher publisher = client.listListenersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.globalaccelerator.model.ListListenersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.globalaccelerator.model.ListListenersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listListeners(software.amazon.awssdk.services.globalaccelerator.model.ListListenersRequest) operation.


      This is a convenience which creates an instance of the ListListenersRequest.Builder avoiding the need to create one manually via ListListenersRequest.builder()

      Parameters:
      listListenersRequest - A Consumer that will call methods on ListListenersRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InvalidNextTokenException There isn't another item to return.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)

      List all tags for an accelerator.

      For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      listTagsForResourceRequest -
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)

      List all tags for an accelerator.

      For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

      Parameters:
      listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • provisionByoipCidr

      default CompletableFuture<ProvisionByoipCidrResponse> provisionByoipCidr(ProvisionByoipCidrRequest provisionByoipCidrRequest)

      Provisions an IP address range to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

      Parameters:
      provisionByoipCidrRequest -
      Returns:
      A Java Future containing the result of the ProvisionByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • provisionByoipCidr

      default CompletableFuture<ProvisionByoipCidrResponse> provisionByoipCidr(Consumer<ProvisionByoipCidrRequest.Builder> provisionByoipCidrRequest)

      Provisions an IP address range to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the ProvisionByoipCidrRequest.Builder avoiding the need to create one manually via ProvisionByoipCidrRequest.builder()

      Parameters:
      provisionByoipCidrRequest - A Consumer that will call methods on ProvisionByoipCidrRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ProvisionByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • removeCustomRoutingEndpoints

      default CompletableFuture<RemoveCustomRoutingEndpointsResponse> removeCustomRoutingEndpoints(RemoveCustomRoutingEndpointsRequest removeCustomRoutingEndpointsRequest)

      Remove endpoints from a custom routing accelerator.

      Parameters:
      removeCustomRoutingEndpointsRequest -
      Returns:
      A Java Future containing the result of the RemoveCustomRoutingEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • EndpointNotFoundException The endpoint that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ConflictException You can't use both of those options.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • removeCustomRoutingEndpoints

      default CompletableFuture<RemoveCustomRoutingEndpointsResponse> removeCustomRoutingEndpoints(Consumer<RemoveCustomRoutingEndpointsRequest.Builder> removeCustomRoutingEndpointsRequest)

      Remove endpoints from a custom routing accelerator.


      This is a convenience which creates an instance of the RemoveCustomRoutingEndpointsRequest.Builder avoiding the need to create one manually via RemoveCustomRoutingEndpointsRequest.builder()

      Parameters:
      removeCustomRoutingEndpointsRequest - A Consumer that will call methods on RemoveCustomRoutingEndpointsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the RemoveCustomRoutingEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • EndpointNotFoundException The endpoint that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ConflictException You can't use both of those options.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • removeEndpoints

      default CompletableFuture<RemoveEndpointsResponse> removeEndpoints(RemoveEndpointsRequest removeEndpointsRequest)

      Remove endpoints from an endpoint group.

      The RemoveEndpoints API operation is the recommended option for removing endpoints. The alternative is to remove endpoints by updating an endpoint group by using the UpdateEndpointGroup API operation. There are two advantages to using AddEndpoints to remove endpoints instead:

      • It's more convenient, because you only need to specify the endpoints that you want to remove. With the UpdateEndpointGroup API operation, you must specify all of the endpoints in the endpoint group except the ones that you want to remove from the group.

      • It's faster, because Global Accelerator doesn't need to resolve any endpoints. With the UpdateEndpointGroup API operation, Global Accelerator must resolve all of the endpoints that remain in the group.

      Parameters:
      removeEndpointsRequest -
      Returns:
      A Java Future containing the result of the RemoveEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • removeEndpoints

      default CompletableFuture<RemoveEndpointsResponse> removeEndpoints(Consumer<RemoveEndpointsRequest.Builder> removeEndpointsRequest)

      Remove endpoints from an endpoint group.

      The RemoveEndpoints API operation is the recommended option for removing endpoints. The alternative is to remove endpoints by updating an endpoint group by using the UpdateEndpointGroup API operation. There are two advantages to using AddEndpoints to remove endpoints instead:

      • It's more convenient, because you only need to specify the endpoints that you want to remove. With the UpdateEndpointGroup API operation, you must specify all of the endpoints in the endpoint group except the ones that you want to remove from the group.

      • It's faster, because Global Accelerator doesn't need to resolve any endpoints. With the UpdateEndpointGroup API operation, Global Accelerator must resolve all of the endpoints that remain in the group.


      This is a convenience which creates an instance of the RemoveEndpointsRequest.Builder avoiding the need to create one manually via RemoveEndpointsRequest.builder()

      Parameters:
      removeEndpointsRequest - A Consumer that will call methods on RemoveEndpointsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the RemoveEndpoints operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)

      Add tags to an accelerator resource.

      For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      tagResourceRequest -
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

      Add tags to an accelerator resource.

      For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

      Parameters:
      tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)

      Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.

      For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      untagResourceRequest -
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

      Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.

      For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

      Parameters:
      untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateAccelerator

      default CompletableFuture<UpdateAcceleratorResponse> updateAccelerator(UpdateAcceleratorRequest updateAcceleratorRequest)

      Update an accelerator to make changes, such as the following:

      • Change the name of the accelerator.

      • Disable the accelerator so that it no longer accepts or routes traffic, or so that you can delete it.

      • Enable the accelerator, if it is disabled.

      • Change the IP address type to dual-stack if it is IPv4, or change the IP address type to IPv4 if it's dual-stack.

      Be aware that static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete the accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them.

      Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.

      Parameters:
      updateAcceleratorRequest -
      Returns:
      A Java Future containing the result of the UpdateAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateAccelerator

      default CompletableFuture<UpdateAcceleratorResponse> updateAccelerator(Consumer<UpdateAcceleratorRequest.Builder> updateAcceleratorRequest)

      Update an accelerator to make changes, such as the following:

      • Change the name of the accelerator.

      • Disable the accelerator so that it no longer accepts or routes traffic, or so that you can delete it.

      • Enable the accelerator, if it is disabled.

      • Change the IP address type to dual-stack if it is IPv4, or change the IP address type to IPv4 if it's dual-stack.

      Be aware that static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete the accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them.

      Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.


      This is a convenience which creates an instance of the UpdateAcceleratorRequest.Builder avoiding the need to create one manually via UpdateAcceleratorRequest.builder()

      Parameters:
      updateAcceleratorRequest - A Consumer that will call methods on UpdateAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateAcceleratorAttributes

      default CompletableFuture<UpdateAcceleratorAttributesResponse> updateAcceleratorAttributes(UpdateAcceleratorAttributesRequest updateAcceleratorAttributesRequest)

      Update the attributes for an accelerator.

      Parameters:
      updateAcceleratorAttributesRequest -
      Returns:
      A Java Future containing the result of the UpdateAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateAcceleratorAttributes

      default CompletableFuture<UpdateAcceleratorAttributesResponse> updateAcceleratorAttributes(Consumer<UpdateAcceleratorAttributesRequest.Builder> updateAcceleratorAttributesRequest)

      Update the attributes for an accelerator.


      This is a convenience which creates an instance of the UpdateAcceleratorAttributesRequest.Builder avoiding the need to create one manually via UpdateAcceleratorAttributesRequest.builder()

      Parameters:
      updateAcceleratorAttributesRequest - A Consumer that will call methods on UpdateAcceleratorAttributesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCrossAccountAttachment

      default CompletableFuture<UpdateCrossAccountAttachmentResponse> updateCrossAccountAttachment(UpdateCrossAccountAttachmentRequest updateCrossAccountAttachmentRequest)

      Update a cross-account attachment to add or remove principals or resources. When you update an attachment to remove a principal (account ID or accelerator) or a resource, Global Accelerator revokes the permission for specific resources.

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.

      Parameters:
      updateCrossAccountAttachmentRequest -
      Returns:
      A Java Future containing the result of the UpdateCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AttachmentNotFoundException No cross-account attachment was found.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCrossAccountAttachment

      default CompletableFuture<UpdateCrossAccountAttachmentResponse> updateCrossAccountAttachment(Consumer<UpdateCrossAccountAttachmentRequest.Builder> updateCrossAccountAttachmentRequest)

      Update a cross-account attachment to add or remove principals or resources. When you update an attachment to remove a principal (account ID or accelerator) or a resource, Global Accelerator revokes the permission for specific resources.

      For more information, see Working with cross-account attachments and resources in Global Accelerator in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the UpdateCrossAccountAttachmentRequest.Builder avoiding the need to create one manually via UpdateCrossAccountAttachmentRequest.builder()

      Parameters:
      updateCrossAccountAttachmentRequest - A Consumer that will call methods on UpdateCrossAccountAttachmentRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateCrossAccountAttachment operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AttachmentNotFoundException No cross-account attachment was found.
      • AccessDeniedException You don't have access permission.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • TransactionInProgressException There's already a transaction in progress. Another transaction can't be processed.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCustomRoutingAccelerator

      default CompletableFuture<UpdateCustomRoutingAcceleratorResponse> updateCustomRoutingAccelerator(UpdateCustomRoutingAcceleratorRequest updateCustomRoutingAcceleratorRequest)

      Update a custom routing accelerator.

      Parameters:
      updateCustomRoutingAcceleratorRequest -
      Returns:
      A Java Future containing the result of the UpdateCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCustomRoutingAccelerator

      default CompletableFuture<UpdateCustomRoutingAcceleratorResponse> updateCustomRoutingAccelerator(Consumer<UpdateCustomRoutingAcceleratorRequest.Builder> updateCustomRoutingAcceleratorRequest)

      Update a custom routing accelerator.


      This is a convenience which creates an instance of the UpdateCustomRoutingAcceleratorRequest.Builder avoiding the need to create one manually via UpdateCustomRoutingAcceleratorRequest.builder()

      Parameters:
      updateCustomRoutingAcceleratorRequest - A Consumer that will call methods on UpdateCustomRoutingAcceleratorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateCustomRoutingAccelerator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCustomRoutingAcceleratorAttributes

      default CompletableFuture<UpdateCustomRoutingAcceleratorAttributesResponse> updateCustomRoutingAcceleratorAttributes(UpdateCustomRoutingAcceleratorAttributesRequest updateCustomRoutingAcceleratorAttributesRequest)

      Update the attributes for a custom routing accelerator.

      Parameters:
      updateCustomRoutingAcceleratorAttributesRequest -
      Returns:
      A Java Future containing the result of the UpdateCustomRoutingAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCustomRoutingAcceleratorAttributes

      default CompletableFuture<UpdateCustomRoutingAcceleratorAttributesResponse> updateCustomRoutingAcceleratorAttributes(Consumer<UpdateCustomRoutingAcceleratorAttributesRequest.Builder> updateCustomRoutingAcceleratorAttributesRequest)

      Update the attributes for a custom routing accelerator.


      This is a convenience which creates an instance of the UpdateCustomRoutingAcceleratorAttributesRequest.Builder avoiding the need to create one manually via UpdateCustomRoutingAcceleratorAttributesRequest.builder()

      Parameters:
      updateCustomRoutingAcceleratorAttributesRequest - A Consumer that will call methods on UpdateCustomRoutingAcceleratorAttributesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateCustomRoutingAcceleratorAttributes operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • AcceleratorNotFoundException The accelerator that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCustomRoutingListener

      default CompletableFuture<UpdateCustomRoutingListenerResponse> updateCustomRoutingListener(UpdateCustomRoutingListenerRequest updateCustomRoutingListenerRequest)

      Update a listener for a custom routing accelerator.

      Parameters:
      updateCustomRoutingListenerRequest -
      Returns:
      A Java Future containing the result of the UpdateCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateCustomRoutingListener

      default CompletableFuture<UpdateCustomRoutingListenerResponse> updateCustomRoutingListener(Consumer<UpdateCustomRoutingListenerRequest.Builder> updateCustomRoutingListenerRequest)

      Update a listener for a custom routing accelerator.


      This is a convenience which creates an instance of the UpdateCustomRoutingListenerRequest.Builder avoiding the need to create one manually via UpdateCustomRoutingListenerRequest.builder()

      Parameters:
      updateCustomRoutingListenerRequest - A Consumer that will call methods on UpdateCustomRoutingListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateCustomRoutingListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateEndpointGroup

      default CompletableFuture<UpdateEndpointGroupResponse> updateEndpointGroup(UpdateEndpointGroupRequest updateEndpointGroupRequest)

      Update an endpoint group. A resource must be valid and active when you add it as an endpoint.

      Parameters:
      updateEndpointGroupRequest -
      Returns:
      A Java Future containing the result of the UpdateEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateEndpointGroup

      default CompletableFuture<UpdateEndpointGroupResponse> updateEndpointGroup(Consumer<UpdateEndpointGroupRequest.Builder> updateEndpointGroupRequest)

      Update an endpoint group. A resource must be valid and active when you add it as an endpoint.


      This is a convenience which creates an instance of the UpdateEndpointGroupRequest.Builder avoiding the need to create one manually via UpdateEndpointGroupRequest.builder()

      Parameters:
      updateEndpointGroupRequest - A Consumer that will call methods on UpdateEndpointGroupRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateEndpointGroup operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • EndpointGroupNotFoundException The endpoint group that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • AccessDeniedException You don't have access permission.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateListener

      default CompletableFuture<UpdateListenerResponse> updateListener(UpdateListenerRequest updateListenerRequest)

      Update a listener.

      Parameters:
      updateListenerRequest -
      Returns:
      A Java Future containing the result of the UpdateListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateListener

      default CompletableFuture<UpdateListenerResponse> updateListener(Consumer<UpdateListenerRequest.Builder> updateListenerRequest)

      Update a listener.


      This is a convenience which creates an instance of the UpdateListenerRequest.Builder avoiding the need to create one manually via UpdateListenerRequest.builder()

      Parameters:
      updateListenerRequest - A Consumer that will call methods on UpdateListenerRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateListener operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InvalidArgumentException An argument that you specified is invalid.
      • InvalidPortRangeException The port numbers that you specified are not valid numbers or are not unique for this accelerator.
      • ListenerNotFoundException The listener that you specified doesn't exist.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • LimitExceededException Processing your request would cause you to exceed an Global Accelerator limit.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • withdrawByoipCidr

      default CompletableFuture<WithdrawByoipCidrResponse> withdrawByoipCidr(WithdrawByoipCidrRequest withdrawByoipCidrRequest)

      Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

      It can take a few minutes before traffic to the specified addresses stops routing to Amazon Web Services because of propagation delays.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

      Parameters:
      withdrawByoipCidrRequest -
      Returns:
      A Java Future containing the result of the WithdrawByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ByoipCidrNotFoundException The CIDR that you specified was not found or is incorrect.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • withdrawByoipCidr

      default CompletableFuture<WithdrawByoipCidrResponse> withdrawByoipCidr(Consumer<WithdrawByoipCidrRequest.Builder> withdrawByoipCidrRequest)

      Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

      It can take a few minutes before traffic to the specified addresses stops routing to Amazon Web Services because of propagation delays.

      For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.


      This is a convenience which creates an instance of the WithdrawByoipCidrRequest.Builder avoiding the need to create one manually via WithdrawByoipCidrRequest.builder()

      Parameters:
      withdrawByoipCidrRequest - A Consumer that will call methods on WithdrawByoipCidrRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the WithdrawByoipCidr operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServiceErrorException There was an internal error for Global Accelerator.
      • InvalidArgumentException An argument that you specified is invalid.
      • AccessDeniedException You don't have access permission.
      • ByoipCidrNotFoundException The CIDR that you specified was not found or is incorrect.
      • IncorrectCidrStateException The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be incorrect for this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • GlobalAcceleratorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • serviceClientConfiguration

      default GlobalAcceleratorServiceClientConfiguration serviceClientConfiguration()
      Description copied from interface: SdkClient
      The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
      Specified by:
      serviceClientConfiguration in interface AwsClient
      Specified by:
      serviceClientConfiguration in interface SdkClient
      Returns:
      SdkServiceClientConfiguration

    • create

      static GlobalAcceleratorAsyncClient create()
      Create a GlobalAcceleratorAsyncClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

    • builder

      static GlobalAcceleratorAsyncClientBuilder builder()
      Create a builder that can be used to configure and create a GlobalAcceleratorAsyncClient.