Package software.amazon.awssdk.services.internetmonitor

Interface InternetMonitorAsyncClient

All Superinterfaces:
AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface InternetMonitorAsyncClient extends AwsClient
Service client for accessing Amazon CloudWatch Internet Monitor asynchronously. This can be created using the static builder() method.The asynchronous client performs non-blocking I/O when configured with any SdkAsyncHttpClient supported in the SDK. However, full non-blocking is not guaranteed as the async client may perform blocking calls in some cases such as credentials retrieval and endpoint discovery as part of the async API call.

Amazon CloudWatch Internet Monitor provides visibility into how internet issues impact the performance and availability between your applications hosted on Amazon Web Services and your end users. It can reduce the time it takes for you to diagnose internet issues from days to minutes. Internet Monitor uses the connectivity data that Amazon Web Services captures from its global networking footprint to calculate a baseline of performance and availability for internet traffic. This is the same data that Amazon Web Services uses to monitor internet uptime and availability. With those measurements as a baseline, Internet Monitor raises awareness for you when there are significant problems for your end users in the different geographic locations where your application runs.

Internet Monitor publishes internet measurements to CloudWatch Logs and CloudWatch Metrics, to easily support using CloudWatch tools with health information for geographies and networks specific to your application. Internet Monitor sends health events to Amazon EventBridge so that you can set up notifications. If an issue is caused by the Amazon Web Services network, you also automatically receive an Amazon Web Services Health Dashboard notification with the steps that Amazon Web Services is taking to mitigate the problem.

To use Internet Monitor, you create a monitor and associate your application's resources with it - VPCs, NLBs, CloudFront distributions, or WorkSpaces directories - so Internet Monitor can determine where your application's internet traffic is. Internet Monitor then provides internet measurements from Amazon Web Services that are specific to the locations and ASNs (typically, internet service providers or ISPs) that communicate with your application.

For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.

  • Field Details

  • Method Details

    • createMonitor

      default CompletableFuture<CreateMonitorResponse> createMonitor(CreateMonitorRequest createMonitorRequest)

      Creates a monitor in Amazon CloudWatch Internet Monitor. A monitor is built based on information from the application resources that you add: VPCs, Network Load Balancers (NLBs), Amazon CloudFront distributions, and Amazon WorkSpaces directories. Internet Monitor then publishes internet measurements from Amazon Web Services that are specific to the city-networks. That is, the locations and ASNs (typically internet service providers or ISPs), where clients access your application. For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.

      When you create a monitor, you choose the percentage of traffic that you want to monitor. You can also set a maximum limit for the number of city-networks where client traffic is monitored, that caps the total traffic that Internet Monitor monitors. A city-network maximum is the limit of city-networks, but you only pay for the number of city-networks that are actually monitored. You can update your monitor at any time to change the percentage of traffic to monitor or the city-networks maximum. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.

      Parameters:
      createMonitorRequest -
      Returns:
      A Java Future containing the result of the CreateMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ConflictException The requested resource is in use.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createMonitor

      default CompletableFuture<CreateMonitorResponse> createMonitor(Consumer<CreateMonitorRequest.Builder> createMonitorRequest)

      Creates a monitor in Amazon CloudWatch Internet Monitor. A monitor is built based on information from the application resources that you add: VPCs, Network Load Balancers (NLBs), Amazon CloudFront distributions, and Amazon WorkSpaces directories. Internet Monitor then publishes internet measurements from Amazon Web Services that are specific to the city-networks. That is, the locations and ASNs (typically internet service providers or ISPs), where clients access your application. For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.

      When you create a monitor, you choose the percentage of traffic that you want to monitor. You can also set a maximum limit for the number of city-networks where client traffic is monitored, that caps the total traffic that Internet Monitor monitors. A city-network maximum is the limit of city-networks, but you only pay for the number of city-networks that are actually monitored. You can update your monitor at any time to change the percentage of traffic to monitor or the city-networks maximum. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.


      This is a convenience which creates an instance of the CreateMonitorRequest.Builder avoiding the need to create one manually via CreateMonitorRequest.builder()

      Parameters:
      createMonitorRequest - A Consumer that will call methods on CreateMonitorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ConflictException The requested resource is in use.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteMonitor

      default CompletableFuture<DeleteMonitorResponse> deleteMonitor(DeleteMonitorRequest deleteMonitorRequest)

      Deletes a monitor in Amazon CloudWatch Internet Monitor.

      Parameters:
      deleteMonitorRequest -
      Returns:
      A Java Future containing the result of the DeleteMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteMonitor

      default CompletableFuture<DeleteMonitorResponse> deleteMonitor(Consumer<DeleteMonitorRequest.Builder> deleteMonitorRequest)

      Deletes a monitor in Amazon CloudWatch Internet Monitor.


      This is a convenience which creates an instance of the DeleteMonitorRequest.Builder avoiding the need to create one manually via DeleteMonitorRequest.builder()

      Parameters:
      deleteMonitorRequest - A Consumer that will call methods on DeleteMonitorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getHealthEvent

      default CompletableFuture<GetHealthEventResponse> getHealthEvent(GetHealthEventRequest getHealthEventRequest)

      Gets information that Amazon CloudWatch Internet Monitor has created and stored about a health event for a specified monitor. This information includes the impacted locations, and all the information related to the event, by location.

      The information returned includes the impact on performance, availability, and round-trip time, information about the network providers (ASNs), the event type, and so on.

      Information rolled up at the global traffic level is also returned, including the impact type and total traffic impact.

      Parameters:
      getHealthEventRequest -
      Returns:
      A Java Future containing the result of the GetHealthEvent operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getHealthEvent

      default CompletableFuture<GetHealthEventResponse> getHealthEvent(Consumer<GetHealthEventRequest.Builder> getHealthEventRequest)

      Gets information that Amazon CloudWatch Internet Monitor has created and stored about a health event for a specified monitor. This information includes the impacted locations, and all the information related to the event, by location.

      The information returned includes the impact on performance, availability, and round-trip time, information about the network providers (ASNs), the event type, and so on.

      Information rolled up at the global traffic level is also returned, including the impact type and total traffic impact.


      This is a convenience which creates an instance of the GetHealthEventRequest.Builder avoiding the need to create one manually via GetHealthEventRequest.builder()

      Parameters:
      getHealthEventRequest - A Consumer that will call methods on GetHealthEventRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetHealthEvent operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInternetEvent

      default CompletableFuture<GetInternetEventResponse> getInternetEvent(GetInternetEventRequest getInternetEventRequest)

      Gets information that Amazon CloudWatch Internet Monitor has generated about an internet event. Internet Monitor displays information about recent global health events, called internet events, on a global outages map that is available to all Amazon Web Services customers.

      The information returned here includes the impacted location, when the event started and (if the event is over) ended, the type of event (PERFORMANCE or AVAILABILITY), and the status ( ACTIVE or RESOLVED).

      Parameters:
      getInternetEventRequest -
      Returns:
      A Java Future containing the result of the GetInternetEvent operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInternetEvent

      default CompletableFuture<GetInternetEventResponse> getInternetEvent(Consumer<GetInternetEventRequest.Builder> getInternetEventRequest)

      Gets information that Amazon CloudWatch Internet Monitor has generated about an internet event. Internet Monitor displays information about recent global health events, called internet events, on a global outages map that is available to all Amazon Web Services customers.

      The information returned here includes the impacted location, when the event started and (if the event is over) ended, the type of event (PERFORMANCE or AVAILABILITY), and the status ( ACTIVE or RESOLVED).


      This is a convenience which creates an instance of the GetInternetEventRequest.Builder avoiding the need to create one manually via GetInternetEventRequest.builder()

      Parameters:
      getInternetEventRequest - A Consumer that will call methods on GetInternetEventRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetInternetEvent operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMonitor

      default CompletableFuture<GetMonitorResponse> getMonitor(GetMonitorRequest getMonitorRequest)

      Gets information about a monitor in Amazon CloudWatch Internet Monitor based on a monitor name. The information returned includes the Amazon Resource Name (ARN), create time, modified time, resources included in the monitor, and status information.

      Parameters:
      getMonitorRequest -
      Returns:
      A Java Future containing the result of the GetMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMonitor

      default CompletableFuture<GetMonitorResponse> getMonitor(Consumer<GetMonitorRequest.Builder> getMonitorRequest)

      Gets information about a monitor in Amazon CloudWatch Internet Monitor based on a monitor name. The information returned includes the Amazon Resource Name (ARN), create time, modified time, resources included in the monitor, and status information.


      This is a convenience which creates an instance of the GetMonitorRequest.Builder avoiding the need to create one manually via GetMonitorRequest.builder()

      Parameters:
      getMonitorRequest - A Consumer that will call methods on GetMonitorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getQueryResults

      default CompletableFuture<GetQueryResultsResponse> getQueryResults(GetQueryResultsRequest getQueryResultsRequest)

      Return the data for a query with the Amazon CloudWatch Internet Monitor query interface. Specify the query that you want to return results for by providing a QueryId and a monitor name.

      For more information about using the query interface, including examples, see Using the Amazon CloudWatch Internet Monitor query interface in the Amazon CloudWatch Internet Monitor User Guide.

      Parameters:
      getQueryResultsRequest -
      Returns:
      A Java Future containing the result of the GetQueryResults operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getQueryResults

      default CompletableFuture<GetQueryResultsResponse> getQueryResults(Consumer<GetQueryResultsRequest.Builder> getQueryResultsRequest)

      Return the data for a query with the Amazon CloudWatch Internet Monitor query interface. Specify the query that you want to return results for by providing a QueryId and a monitor name.

      For more information about using the query interface, including examples, see Using the Amazon CloudWatch Internet Monitor query interface in the Amazon CloudWatch Internet Monitor User Guide.


      This is a convenience which creates an instance of the GetQueryResultsRequest.Builder avoiding the need to create one manually via GetQueryResultsRequest.builder()

      Parameters:
      getQueryResultsRequest - A Consumer that will call methods on GetQueryResultsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetQueryResults operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getQueryResultsPaginator

      default GetQueryResultsPublisher getQueryResultsPaginator(GetQueryResultsRequest getQueryResultsRequest)

      This is a variant of getQueryResults(software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.GetQueryResultsPublisher publisher = client.getQueryResultsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.GetQueryResultsPublisher publisher = client.getQueryResultsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getQueryResults(software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsRequest) operation.

      Parameters:
      getQueryResultsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getQueryResultsPaginator

      default GetQueryResultsPublisher getQueryResultsPaginator(Consumer<GetQueryResultsRequest.Builder> getQueryResultsRequest)

      This is a variant of getQueryResults(software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.GetQueryResultsPublisher publisher = client.getQueryResultsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.GetQueryResultsPublisher publisher = client.getQueryResultsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getQueryResults(software.amazon.awssdk.services.internetmonitor.model.GetQueryResultsRequest) operation.


      This is a convenience which creates an instance of the GetQueryResultsRequest.Builder avoiding the need to create one manually via GetQueryResultsRequest.builder()

      Parameters:
      getQueryResultsRequest - A Consumer that will call methods on GetQueryResultsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getQueryStatus

      default CompletableFuture<GetQueryStatusResponse> getQueryStatus(GetQueryStatusRequest getQueryStatusRequest)

      Returns the current status of a query for the Amazon CloudWatch Internet Monitor query interface, for a specified query ID and monitor. When you run a query, check the status to make sure that the query has SUCCEEDED before you review the results.

      • QUEUED: The query is scheduled to run.

      • RUNNING: The query is in progress but not complete.

      • SUCCEEDED: The query completed sucessfully.

      • FAILED: The query failed due to an error.

      • CANCELED: The query was canceled.

      Parameters:
      getQueryStatusRequest -
      Returns:
      A Java Future containing the result of the GetQueryStatus operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getQueryStatus

      default CompletableFuture<GetQueryStatusResponse> getQueryStatus(Consumer<GetQueryStatusRequest.Builder> getQueryStatusRequest)

      Returns the current status of a query for the Amazon CloudWatch Internet Monitor query interface, for a specified query ID and monitor. When you run a query, check the status to make sure that the query has SUCCEEDED before you review the results.

      • QUEUED: The query is scheduled to run.

      • RUNNING: The query is in progress but not complete.

      • SUCCEEDED: The query completed sucessfully.

      • FAILED: The query failed due to an error.

      • CANCELED: The query was canceled.


      This is a convenience which creates an instance of the GetQueryStatusRequest.Builder avoiding the need to create one manually via GetQueryStatusRequest.builder()

      Parameters:
      getQueryStatusRequest - A Consumer that will call methods on GetQueryStatusRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetQueryStatus operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listHealthEvents

      default CompletableFuture<ListHealthEventsResponse> listHealthEvents(ListHealthEventsRequest listHealthEventsRequest)

      Lists all health events for a monitor in Amazon CloudWatch Internet Monitor. Returns information for health events including the event start and end times, and the status.

      Health events that have start times during the time frame that is requested are not included in the list of health events.

      Parameters:
      listHealthEventsRequest -
      Returns:
      A Java Future containing the result of the ListHealthEvents operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listHealthEvents

      default CompletableFuture<ListHealthEventsResponse> listHealthEvents(Consumer<ListHealthEventsRequest.Builder> listHealthEventsRequest)

      Lists all health events for a monitor in Amazon CloudWatch Internet Monitor. Returns information for health events including the event start and end times, and the status.

      Health events that have start times during the time frame that is requested are not included in the list of health events.


      This is a convenience which creates an instance of the ListHealthEventsRequest.Builder avoiding the need to create one manually via ListHealthEventsRequest.builder()

      Parameters:
      listHealthEventsRequest - A Consumer that will call methods on ListHealthEventsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListHealthEvents operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listHealthEventsPaginator

      default ListHealthEventsPublisher listHealthEventsPaginator(ListHealthEventsRequest listHealthEventsRequest)

      This is a variant of listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest) operation.

      Parameters:
      listHealthEventsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listHealthEventsPaginator

      default ListHealthEventsPublisher listHealthEventsPaginator(Consumer<ListHealthEventsRequest.Builder> listHealthEventsRequest)

      This is a variant of listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest) operation.


      This is a convenience which creates an instance of the ListHealthEventsRequest.Builder avoiding the need to create one manually via ListHealthEventsRequest.builder()

      Parameters:
      listHealthEventsRequest - A Consumer that will call methods on ListHealthEventsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInternetEvents

      default CompletableFuture<ListInternetEventsResponse> listInternetEvents(ListInternetEventsRequest listInternetEventsRequest)

      Lists internet events that cause performance or availability issues for client locations. Amazon CloudWatch Internet Monitor displays information about recent global health events, called internet events, on a global outages map that is available to all Amazon Web Services customers.

      You can constrain the list of internet events returned by providing a start time and end time to define a total time frame for events you want to list. Both start time and end time specify the time when an event started. End time is optional. If you don't include it, the default end time is the current time.

      You can also limit the events returned to a specific status (ACTIVE or RESOLVED) or type (PERFORMANCE or AVAILABILITY).

      Parameters:
      listInternetEventsRequest -
      Returns:
      A Java Future containing the result of the ListInternetEvents operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInternetEvents

      default CompletableFuture<ListInternetEventsResponse> listInternetEvents(Consumer<ListInternetEventsRequest.Builder> listInternetEventsRequest)

      Lists internet events that cause performance or availability issues for client locations. Amazon CloudWatch Internet Monitor displays information about recent global health events, called internet events, on a global outages map that is available to all Amazon Web Services customers.

      You can constrain the list of internet events returned by providing a start time and end time to define a total time frame for events you want to list. Both start time and end time specify the time when an event started. End time is optional. If you don't include it, the default end time is the current time.

      You can also limit the events returned to a specific status (ACTIVE or RESOLVED) or type (PERFORMANCE or AVAILABILITY).


      This is a convenience which creates an instance of the ListInternetEventsRequest.Builder avoiding the need to create one manually via ListInternetEventsRequest.builder()

      Parameters:
      listInternetEventsRequest - A Consumer that will call methods on ListInternetEventsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListInternetEvents operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInternetEventsPaginator

      default ListInternetEventsPublisher listInternetEventsPaginator(ListInternetEventsRequest listInternetEventsRequest)

      This is a variant of listInternetEvents(software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListInternetEventsPublisher publisher = client.listInternetEventsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListInternetEventsPublisher publisher = client.listInternetEventsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listInternetEvents(software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsRequest) operation.

      Parameters:
      listInternetEventsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInternetEventsPaginator

      default ListInternetEventsPublisher listInternetEventsPaginator(Consumer<ListInternetEventsRequest.Builder> listInternetEventsRequest)

      This is a variant of listInternetEvents(software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListInternetEventsPublisher publisher = client.listInternetEventsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListInternetEventsPublisher publisher = client.listInternetEventsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listInternetEvents(software.amazon.awssdk.services.internetmonitor.model.ListInternetEventsRequest) operation.


      This is a convenience which creates an instance of the ListInternetEventsRequest.Builder avoiding the need to create one manually via ListInternetEventsRequest.builder()

      Parameters:
      listInternetEventsRequest - A Consumer that will call methods on ListInternetEventsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMonitors

      default CompletableFuture<ListMonitorsResponse> listMonitors(ListMonitorsRequest listMonitorsRequest)

      Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon Resource Name (ARN) and name of each monitor.

      Parameters:
      listMonitorsRequest -
      Returns:
      A Java Future containing the result of the ListMonitors operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMonitors

      default CompletableFuture<ListMonitorsResponse> listMonitors(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)

      Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon Resource Name (ARN) and name of each monitor.


      This is a convenience which creates an instance of the ListMonitorsRequest.Builder avoiding the need to create one manually via ListMonitorsRequest.builder()

      Parameters:
      listMonitorsRequest - A Consumer that will call methods on ListMonitorsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListMonitors operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMonitorsPaginator

      default ListMonitorsPublisher listMonitorsPaginator(ListMonitorsRequest listMonitorsRequest)

      This is a variant of listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation.

      Parameters:
      listMonitorsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMonitorsPaginator

      default ListMonitorsPublisher listMonitorsPaginator(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)

      This is a variant of listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation.


      This is a convenience which creates an instance of the ListMonitorsRequest.Builder avoiding the need to create one manually via ListMonitorsRequest.builder()

      Parameters:
      listMonitorsRequest - A Consumer that will call methods on ListMonitorsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)

      Lists the tags for a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor.

      Parameters:
      listTagsForResourceRequest -
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TooManyRequestsException There were too many requests.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • NotFoundException The request specifies something that doesn't exist.
      • BadRequestException A bad request was received.
      • InternalServerErrorException There was an internal server error.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)

      Lists the tags for a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor.


      This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

      Parameters:
      listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TooManyRequestsException There were too many requests.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • NotFoundException The request specifies something that doesn't exist.
      • BadRequestException A bad request was received.
      • InternalServerErrorException There was an internal server error.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • startQuery

      default CompletableFuture<StartQueryResponse> startQuery(StartQueryRequest startQueryRequest)

      Start a query to return data for a specific query type for the Amazon CloudWatch Internet Monitor query interface. Specify a time period for the data that you want returned by using StartTime and EndTime. You filter the query results to return by providing parameters that you specify with FilterParameters.

      For more information about using the query interface, including examples, see Using the Amazon CloudWatch Internet Monitor query interface in the Amazon CloudWatch Internet Monitor User Guide.

      Parameters:
      startQueryRequest -
      Returns:
      A Java Future containing the result of the StartQuery operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • startQuery

      default CompletableFuture<StartQueryResponse> startQuery(Consumer<StartQueryRequest.Builder> startQueryRequest)

      Start a query to return data for a specific query type for the Amazon CloudWatch Internet Monitor query interface. Specify a time period for the data that you want returned by using StartTime and EndTime. You filter the query results to return by providing parameters that you specify with FilterParameters.

      For more information about using the query interface, including examples, see Using the Amazon CloudWatch Internet Monitor query interface in the Amazon CloudWatch Internet Monitor User Guide.


      This is a convenience which creates an instance of the StartQueryRequest.Builder avoiding the need to create one manually via StartQueryRequest.builder()

      Parameters:
      startQueryRequest - A Consumer that will call methods on StartQueryRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the StartQuery operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • stopQuery

      default CompletableFuture<StopQueryResponse> stopQuery(StopQueryRequest stopQueryRequest)

      Stop a query that is progress for a specific monitor.

      Parameters:
      stopQueryRequest -
      Returns:
      A Java Future containing the result of the StopQuery operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • stopQuery

      default CompletableFuture<StopQueryResponse> stopQuery(Consumer<StopQueryRequest.Builder> stopQueryRequest)

      Stop a query that is progress for a specific monitor.


      This is a convenience which creates an instance of the StopQueryRequest.Builder avoiding the need to create one manually via StopQueryRequest.builder()

      Parameters:
      stopQueryRequest - A Consumer that will call methods on StopQueryRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the StopQuery operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)

      Adds a tag to a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor. You can add a maximum of 50 tags in Internet Monitor.

      A minimum of one tag is required for this call. It returns an error if you use the TagResource request with 0 tags.

      Parameters:
      tagResourceRequest -
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TooManyRequestsException There were too many requests.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • NotFoundException The request specifies something that doesn't exist.
      • BadRequestException A bad request was received.
      • InternalServerErrorException There was an internal server error.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

      Adds a tag to a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor. You can add a maximum of 50 tags in Internet Monitor.

      A minimum of one tag is required for this call. It returns an error if you use the TagResource request with 0 tags.


      This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

      Parameters:
      tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TooManyRequestsException There were too many requests.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • NotFoundException The request specifies something that doesn't exist.
      • BadRequestException A bad request was received.
      • InternalServerErrorException There was an internal server error.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)

      Removes a tag from a resource.

      Parameters:
      untagResourceRequest -
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TooManyRequestsException There were too many requests.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • NotFoundException The request specifies something that doesn't exist.
      • BadRequestException A bad request was received.
      • InternalServerErrorException There was an internal server error.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

      Removes a tag from a resource.


      This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

      Parameters:
      untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • TooManyRequestsException There were too many requests.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • NotFoundException The request specifies something that doesn't exist.
      • BadRequestException A bad request was received.
      • InternalServerErrorException There was an internal server error.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateMonitor

      default CompletableFuture<UpdateMonitorResponse> updateMonitor(UpdateMonitorRequest updateMonitorRequest)

      Updates a monitor. You can update a monitor to change the percentage of traffic to monitor or the maximum number of city-networks (locations and ASNs), to add or remove resources, or to change the status of the monitor. Note that you can't change the name of a monitor.

      The city-network maximum that you choose is the limit, but you only pay for the number of city-networks that are actually monitored. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.

      Parameters:
      updateMonitorRequest -
      Returns:
      A Java Future containing the result of the UpdateMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • ResourceNotFoundException The request specifies a resource that doesn't exist.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateMonitor

      default CompletableFuture<UpdateMonitorResponse> updateMonitor(Consumer<UpdateMonitorRequest.Builder> updateMonitorRequest)

      Updates a monitor. You can update a monitor to change the percentage of traffic to monitor or the maximum number of city-networks (locations and ASNs), to add or remove resources, or to change the status of the monitor. Note that you can't change the name of a monitor.

      The city-network maximum that you choose is the limit, but you only pay for the number of city-networks that are actually monitored. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.


      This is a convenience which creates an instance of the UpdateMonitorRequest.Builder avoiding the need to create one manually via UpdateMonitorRequest.builder()

      Parameters:
      updateMonitorRequest - A Consumer that will call methods on UpdateMonitorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateMonitor operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalServerException An internal error occurred.
      • ResourceNotFoundException The request specifies a resource that doesn't exist.
      • AccessDeniedException You don't have sufficient permission to perform this action.
      • ThrottlingException The request was denied due to request throttling.
      • LimitExceededException The request exceeded a service quota.
      • ValidationException Invalid request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • InternetMonitorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • serviceClientConfiguration

      default InternetMonitorServiceClientConfiguration serviceClientConfiguration()
      Description copied from interface: SdkClient
      The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
      Specified by:
      serviceClientConfiguration in interface AwsClient
      Specified by:
      serviceClientConfiguration in interface SdkClient
      Returns:
      SdkServiceClientConfiguration

    • create

      static InternetMonitorAsyncClient create()
      Create a InternetMonitorAsyncClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

    • builder

      static InternetMonitorAsyncClientBuilder builder()
      Create a builder that can be used to configure and create a InternetMonitorAsyncClient.