Interface IotDeviceAdvisorAsyncClient
- All Superinterfaces:
AutoCloseable
,AwsClient
,SdkAutoCloseable
,SdkClient
builder()
method.The asynchronous client performs non-blocking I/O when configured with any
SdkAsyncHttpClient
supported in the SDK. However, full non-blocking is not guaranteed as the async client may
perform blocking calls in some cases such as credentials retrieval and endpoint discovery as part of the async API
call.
Amazon Web Services IoT Core Device Advisor is a cloud-based, fully managed test capability for validating IoT devices during device software development. Device Advisor provides pre-built tests that you can use to validate IoT devices for reliable and secure connectivity with Amazon Web Services IoT Core before deploying devices to production. By using Device Advisor, you can confirm that your devices can connect to Amazon Web Services IoT Core, follow security best practices and, if applicable, receive software updates from IoT Device Management. You can also download signed qualification reports to submit to the Amazon Web Services Partner Network to get your device qualified for the Amazon Web Services Partner Device Catalog without the need to send your device in and wait for it to be tested.
-
Field Summary
Modifier and TypeFieldDescriptionstatic final String
Value for looking up the service's metadata from theServiceMetadataProvider
.static final String
-
Method Summary
Modifier and TypeMethodDescriptionbuilder()
Create a builder that can be used to configure and create aIotDeviceAdvisorAsyncClient
.static IotDeviceAdvisorAsyncClient
create()
Create aIotDeviceAdvisorAsyncClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
.createSuiteDefinition
(Consumer<CreateSuiteDefinitionRequest.Builder> createSuiteDefinitionRequest) Creates a Device Advisor test suite.createSuiteDefinition
(CreateSuiteDefinitionRequest createSuiteDefinitionRequest) Creates a Device Advisor test suite.deleteSuiteDefinition
(Consumer<DeleteSuiteDefinitionRequest.Builder> deleteSuiteDefinitionRequest) Deletes a Device Advisor test suite.deleteSuiteDefinition
(DeleteSuiteDefinitionRequest deleteSuiteDefinitionRequest) Deletes a Device Advisor test suite.default CompletableFuture
<GetEndpointResponse> getEndpoint
(Consumer<GetEndpointRequest.Builder> getEndpointRequest) Gets information about an Device Advisor endpoint.default CompletableFuture
<GetEndpointResponse> getEndpoint
(GetEndpointRequest getEndpointRequest) Gets information about an Device Advisor endpoint.getSuiteDefinition
(Consumer<GetSuiteDefinitionRequest.Builder> getSuiteDefinitionRequest) Gets information about a Device Advisor test suite.getSuiteDefinition
(GetSuiteDefinitionRequest getSuiteDefinitionRequest) Gets information about a Device Advisor test suite.default CompletableFuture
<GetSuiteRunResponse> getSuiteRun
(Consumer<GetSuiteRunRequest.Builder> getSuiteRunRequest) Gets information about a Device Advisor test suite run.default CompletableFuture
<GetSuiteRunResponse> getSuiteRun
(GetSuiteRunRequest getSuiteRunRequest) Gets information about a Device Advisor test suite run.getSuiteRunReport
(Consumer<GetSuiteRunReportRequest.Builder> getSuiteRunReportRequest) Gets a report download link for a successful Device Advisor qualifying test suite run.getSuiteRunReport
(GetSuiteRunReportRequest getSuiteRunReportRequest) Gets a report download link for a successful Device Advisor qualifying test suite run.listSuiteDefinitions
(Consumer<ListSuiteDefinitionsRequest.Builder> listSuiteDefinitionsRequest) Lists the Device Advisor test suites you have created.listSuiteDefinitions
(ListSuiteDefinitionsRequest listSuiteDefinitionsRequest) Lists the Device Advisor test suites you have created.default ListSuiteDefinitionsPublisher
listSuiteDefinitionsPaginator
(Consumer<ListSuiteDefinitionsRequest.Builder> listSuiteDefinitionsRequest) This is a variant oflistSuiteDefinitions(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsRequest)
operation.default ListSuiteDefinitionsPublisher
listSuiteDefinitionsPaginator
(ListSuiteDefinitionsRequest listSuiteDefinitionsRequest) This is a variant oflistSuiteDefinitions(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsRequest)
operation.default CompletableFuture
<ListSuiteRunsResponse> listSuiteRuns
(Consumer<ListSuiteRunsRequest.Builder> listSuiteRunsRequest) Lists runs of the specified Device Advisor test suite.default CompletableFuture
<ListSuiteRunsResponse> listSuiteRuns
(ListSuiteRunsRequest listSuiteRunsRequest) Lists runs of the specified Device Advisor test suite.default ListSuiteRunsPublisher
listSuiteRunsPaginator
(Consumer<ListSuiteRunsRequest.Builder> listSuiteRunsRequest) This is a variant oflistSuiteRuns(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsRequest)
operation.default ListSuiteRunsPublisher
listSuiteRunsPaginator
(ListSuiteRunsRequest listSuiteRunsRequest) This is a variant oflistSuiteRuns(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsRequest)
operation.listTagsForResource
(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) Lists the tags attached to an IoT Device Advisor resource.listTagsForResource
(ListTagsForResourceRequest listTagsForResourceRequest) Lists the tags attached to an IoT Device Advisor resource.The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfigurationdefault CompletableFuture
<StartSuiteRunResponse> startSuiteRun
(Consumer<StartSuiteRunRequest.Builder> startSuiteRunRequest) Starts a Device Advisor test suite run.default CompletableFuture
<StartSuiteRunResponse> startSuiteRun
(StartSuiteRunRequest startSuiteRunRequest) Starts a Device Advisor test suite run.default CompletableFuture
<StopSuiteRunResponse> stopSuiteRun
(Consumer<StopSuiteRunRequest.Builder> stopSuiteRunRequest) Stops a Device Advisor test suite run that is currently running.default CompletableFuture
<StopSuiteRunResponse> stopSuiteRun
(StopSuiteRunRequest stopSuiteRunRequest) Stops a Device Advisor test suite run that is currently running.default CompletableFuture
<TagResourceResponse> tagResource
(Consumer<TagResourceRequest.Builder> tagResourceRequest) Adds to and modifies existing tags of an IoT Device Advisor resource.default CompletableFuture
<TagResourceResponse> tagResource
(TagResourceRequest tagResourceRequest) Adds to and modifies existing tags of an IoT Device Advisor resource.default CompletableFuture
<UntagResourceResponse> untagResource
(Consumer<UntagResourceRequest.Builder> untagResourceRequest) Removes tags from an IoT Device Advisor resource.default CompletableFuture
<UntagResourceResponse> untagResource
(UntagResourceRequest untagResourceRequest) Removes tags from an IoT Device Advisor resource.updateSuiteDefinition
(Consumer<UpdateSuiteDefinitionRequest.Builder> updateSuiteDefinitionRequest) Updates a Device Advisor test suite.updateSuiteDefinition
(UpdateSuiteDefinitionRequest updateSuiteDefinitionRequest) Updates a Device Advisor test suite.Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close
Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName
-
Field Details
-
SERVICE_NAME
- See Also:
-
SERVICE_METADATA_ID
Value for looking up the service's metadata from theServiceMetadataProvider
.- See Also:
-
-
Method Details
-
createSuiteDefinition
default CompletableFuture<CreateSuiteDefinitionResponse> createSuiteDefinition(CreateSuiteDefinitionRequest createSuiteDefinitionRequest) Creates a Device Advisor test suite.
Requires permission to access the CreateSuiteDefinition action.
- Parameters:
createSuiteDefinitionRequest
-- Returns:
- A Java Future containing the result of the CreateSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
createSuiteDefinition
default CompletableFuture<CreateSuiteDefinitionResponse> createSuiteDefinition(Consumer<CreateSuiteDefinitionRequest.Builder> createSuiteDefinitionRequest) Creates a Device Advisor test suite.
Requires permission to access the CreateSuiteDefinition action.
This is a convenience which creates an instance of the
CreateSuiteDefinitionRequest.Builder
avoiding the need to create one manually viaCreateSuiteDefinitionRequest.builder()
- Parameters:
createSuiteDefinitionRequest
- AConsumer
that will call methods onCreateSuiteDefinitionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the CreateSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
deleteSuiteDefinition
default CompletableFuture<DeleteSuiteDefinitionResponse> deleteSuiteDefinition(DeleteSuiteDefinitionRequest deleteSuiteDefinitionRequest) Deletes a Device Advisor test suite.
Requires permission to access the DeleteSuiteDefinition action.
- Parameters:
deleteSuiteDefinitionRequest
-- Returns:
- A Java Future containing the result of the DeleteSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
deleteSuiteDefinition
default CompletableFuture<DeleteSuiteDefinitionResponse> deleteSuiteDefinition(Consumer<DeleteSuiteDefinitionRequest.Builder> deleteSuiteDefinitionRequest) Deletes a Device Advisor test suite.
Requires permission to access the DeleteSuiteDefinition action.
This is a convenience which creates an instance of the
DeleteSuiteDefinitionRequest.Builder
avoiding the need to create one manually viaDeleteSuiteDefinitionRequest.builder()
- Parameters:
deleteSuiteDefinitionRequest
- AConsumer
that will call methods onDeleteSuiteDefinitionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getEndpoint
Gets information about an Device Advisor endpoint.
- Parameters:
getEndpointRequest
-- Returns:
- A Java Future containing the result of the GetEndpoint operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getEndpoint
default CompletableFuture<GetEndpointResponse> getEndpoint(Consumer<GetEndpointRequest.Builder> getEndpointRequest) Gets information about an Device Advisor endpoint.
This is a convenience which creates an instance of the
GetEndpointRequest.Builder
avoiding the need to create one manually viaGetEndpointRequest.builder()
- Parameters:
getEndpointRequest
- AConsumer
that will call methods onGetEndpointRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the GetEndpoint operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSuiteDefinition
default CompletableFuture<GetSuiteDefinitionResponse> getSuiteDefinition(GetSuiteDefinitionRequest getSuiteDefinitionRequest) Gets information about a Device Advisor test suite.
Requires permission to access the GetSuiteDefinition action.
- Parameters:
getSuiteDefinitionRequest
-- Returns:
- A Java Future containing the result of the GetSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSuiteDefinition
default CompletableFuture<GetSuiteDefinitionResponse> getSuiteDefinition(Consumer<GetSuiteDefinitionRequest.Builder> getSuiteDefinitionRequest) Gets information about a Device Advisor test suite.
Requires permission to access the GetSuiteDefinition action.
This is a convenience which creates an instance of the
GetSuiteDefinitionRequest.Builder
avoiding the need to create one manually viaGetSuiteDefinitionRequest.builder()
- Parameters:
getSuiteDefinitionRequest
- AConsumer
that will call methods onGetSuiteDefinitionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the GetSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSuiteRun
Gets information about a Device Advisor test suite run.
Requires permission to access the GetSuiteRun action.
- Parameters:
getSuiteRunRequest
-- Returns:
- A Java Future containing the result of the GetSuiteRun operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSuiteRun
default CompletableFuture<GetSuiteRunResponse> getSuiteRun(Consumer<GetSuiteRunRequest.Builder> getSuiteRunRequest) Gets information about a Device Advisor test suite run.
Requires permission to access the GetSuiteRun action.
This is a convenience which creates an instance of the
GetSuiteRunRequest.Builder
avoiding the need to create one manually viaGetSuiteRunRequest.builder()
- Parameters:
getSuiteRunRequest
- AConsumer
that will call methods onGetSuiteRunRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the GetSuiteRun operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSuiteRunReport
default CompletableFuture<GetSuiteRunReportResponse> getSuiteRunReport(GetSuiteRunReportRequest getSuiteRunReportRequest) Gets a report download link for a successful Device Advisor qualifying test suite run.
Requires permission to access the GetSuiteRunReport action.
- Parameters:
getSuiteRunReportRequest
-- Returns:
- A Java Future containing the result of the GetSuiteRunReport operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSuiteRunReport
default CompletableFuture<GetSuiteRunReportResponse> getSuiteRunReport(Consumer<GetSuiteRunReportRequest.Builder> getSuiteRunReportRequest) Gets a report download link for a successful Device Advisor qualifying test suite run.
Requires permission to access the GetSuiteRunReport action.
This is a convenience which creates an instance of the
GetSuiteRunReportRequest.Builder
avoiding the need to create one manually viaGetSuiteRunReportRequest.builder()
- Parameters:
getSuiteRunReportRequest
- AConsumer
that will call methods onGetSuiteRunReportRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the GetSuiteRunReport operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteDefinitions
default CompletableFuture<ListSuiteDefinitionsResponse> listSuiteDefinitions(ListSuiteDefinitionsRequest listSuiteDefinitionsRequest) Lists the Device Advisor test suites you have created.
Requires permission to access the ListSuiteDefinitions action.
- Parameters:
listSuiteDefinitionsRequest
-- Returns:
- A Java Future containing the result of the ListSuiteDefinitions operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteDefinitions
default CompletableFuture<ListSuiteDefinitionsResponse> listSuiteDefinitions(Consumer<ListSuiteDefinitionsRequest.Builder> listSuiteDefinitionsRequest) Lists the Device Advisor test suites you have created.
Requires permission to access the ListSuiteDefinitions action.
This is a convenience which creates an instance of the
ListSuiteDefinitionsRequest.Builder
avoiding the need to create one manually viaListSuiteDefinitionsRequest.builder()
- Parameters:
listSuiteDefinitionsRequest
- AConsumer
that will call methods onListSuiteDefinitionsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListSuiteDefinitions operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteDefinitionsPaginator
default ListSuiteDefinitionsPublisher listSuiteDefinitionsPaginator(ListSuiteDefinitionsRequest listSuiteDefinitionsRequest) This is a variant of
listSuiteDefinitions(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteDefinitionsPublisher publisher = client.listSuiteDefinitionsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteDefinitionsPublisher publisher = client.listSuiteDefinitionsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsResponse response) { //... }; });
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listSuiteDefinitions(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsRequest)
operation.- Parameters:
listSuiteDefinitionsRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteDefinitionsPaginator
default ListSuiteDefinitionsPublisher listSuiteDefinitionsPaginator(Consumer<ListSuiteDefinitionsRequest.Builder> listSuiteDefinitionsRequest) This is a variant of
listSuiteDefinitions(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteDefinitionsPublisher publisher = client.listSuiteDefinitionsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteDefinitionsPublisher publisher = client.listSuiteDefinitionsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsResponse response) { //... }; });
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listSuiteDefinitions(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteDefinitionsRequest)
operation.
This is a convenience which creates an instance of the
ListSuiteDefinitionsRequest.Builder
avoiding the need to create one manually viaListSuiteDefinitionsRequest.builder()
- Parameters:
listSuiteDefinitionsRequest
- AConsumer
that will call methods onListSuiteDefinitionsRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteRuns
default CompletableFuture<ListSuiteRunsResponse> listSuiteRuns(ListSuiteRunsRequest listSuiteRunsRequest) Lists runs of the specified Device Advisor test suite. You can list all runs of the test suite, or the runs of a specific version of the test suite.
Requires permission to access the ListSuiteRuns action.
- Parameters:
listSuiteRunsRequest
-- Returns:
- A Java Future containing the result of the ListSuiteRuns operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteRuns
default CompletableFuture<ListSuiteRunsResponse> listSuiteRuns(Consumer<ListSuiteRunsRequest.Builder> listSuiteRunsRequest) Lists runs of the specified Device Advisor test suite. You can list all runs of the test suite, or the runs of a specific version of the test suite.
Requires permission to access the ListSuiteRuns action.
This is a convenience which creates an instance of the
ListSuiteRunsRequest.Builder
avoiding the need to create one manually viaListSuiteRunsRequest.builder()
- Parameters:
listSuiteRunsRequest
- AConsumer
that will call methods onListSuiteRunsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListSuiteRuns operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteRunsPaginator
This is a variant of
listSuiteRuns(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteRunsPublisher publisher = client.listSuiteRunsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteRunsPublisher publisher = client.listSuiteRunsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsResponse response) { //... }; });
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listSuiteRuns(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsRequest)
operation.- Parameters:
listSuiteRunsRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listSuiteRunsPaginator
default ListSuiteRunsPublisher listSuiteRunsPaginator(Consumer<ListSuiteRunsRequest.Builder> listSuiteRunsRequest) This is a variant of
listSuiteRuns(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteRunsPublisher publisher = client.listSuiteRunsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.iotdeviceadvisor.paginators.ListSuiteRunsPublisher publisher = client.listSuiteRunsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsResponse response) { //... }; });
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listSuiteRuns(software.amazon.awssdk.services.iotdeviceadvisor.model.ListSuiteRunsRequest)
operation.
This is a convenience which creates an instance of the
ListSuiteRunsRequest.Builder
avoiding the need to create one manually viaListSuiteRunsRequest.builder()
- Parameters:
listSuiteRunsRequest
- AConsumer
that will call methods onListSuiteRunsRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listTagsForResource
default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) Lists the tags attached to an IoT Device Advisor resource.
Requires permission to access the ListTagsForResource action.
- Parameters:
listTagsForResourceRequest
-- Returns:
- A Java Future containing the result of the ListTagsForResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- InternalServerException Sends an Internal Failure exception.
- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listTagsForResource
default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) Lists the tags attached to an IoT Device Advisor resource.
Requires permission to access the ListTagsForResource action.
This is a convenience which creates an instance of the
ListTagsForResourceRequest.Builder
avoiding the need to create one manually viaListTagsForResourceRequest.builder()
- Parameters:
listTagsForResourceRequest
- AConsumer
that will call methods onListTagsForResourceRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListTagsForResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- InternalServerException Sends an Internal Failure exception.
- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
startSuiteRun
default CompletableFuture<StartSuiteRunResponse> startSuiteRun(StartSuiteRunRequest startSuiteRunRequest) Starts a Device Advisor test suite run.
Requires permission to access the StartSuiteRun action.
- Parameters:
startSuiteRunRequest
-- Returns:
- A Java Future containing the result of the StartSuiteRun operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ConflictException Sends a Conflict Exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
startSuiteRun
default CompletableFuture<StartSuiteRunResponse> startSuiteRun(Consumer<StartSuiteRunRequest.Builder> startSuiteRunRequest) Starts a Device Advisor test suite run.
Requires permission to access the StartSuiteRun action.
This is a convenience which creates an instance of the
StartSuiteRunRequest.Builder
avoiding the need to create one manually viaStartSuiteRunRequest.builder()
- Parameters:
startSuiteRunRequest
- AConsumer
that will call methods onStartSuiteRunRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the StartSuiteRun operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- ConflictException Sends a Conflict Exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
stopSuiteRun
default CompletableFuture<StopSuiteRunResponse> stopSuiteRun(StopSuiteRunRequest stopSuiteRunRequest) Stops a Device Advisor test suite run that is currently running.
Requires permission to access the StopSuiteRun action.
- Parameters:
stopSuiteRunRequest
-- Returns:
- A Java Future containing the result of the StopSuiteRun operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
stopSuiteRun
default CompletableFuture<StopSuiteRunResponse> stopSuiteRun(Consumer<StopSuiteRunRequest.Builder> stopSuiteRunRequest) Stops a Device Advisor test suite run that is currently running.
Requires permission to access the StopSuiteRun action.
This is a convenience which creates an instance of the
StopSuiteRunRequest.Builder
avoiding the need to create one manually viaStopSuiteRunRequest.builder()
- Parameters:
stopSuiteRunRequest
- AConsumer
that will call methods onStopSuiteRunRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the StopSuiteRun operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
tagResource
Adds to and modifies existing tags of an IoT Device Advisor resource.
Requires permission to access the TagResource action.
- Parameters:
tagResourceRequest
-- Returns:
- A Java Future containing the result of the TagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- InternalServerException Sends an Internal Failure exception.
- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
tagResource
default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) Adds to and modifies existing tags of an IoT Device Advisor resource.
Requires permission to access the TagResource action.
This is a convenience which creates an instance of the
TagResourceRequest.Builder
avoiding the need to create one manually viaTagResourceRequest.builder()
- Parameters:
tagResourceRequest
- AConsumer
that will call methods onTagResourceRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the TagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- InternalServerException Sends an Internal Failure exception.
- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
untagResource
default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest) Removes tags from an IoT Device Advisor resource.
Requires permission to access the UntagResource action.
- Parameters:
untagResourceRequest
-- Returns:
- A Java Future containing the result of the UntagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- InternalServerException Sends an Internal Failure exception.
- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
untagResource
default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) Removes tags from an IoT Device Advisor resource.
Requires permission to access the UntagResource action.
This is a convenience which creates an instance of the
UntagResourceRequest.Builder
avoiding the need to create one manually viaUntagResourceRequest.builder()
- Parameters:
untagResourceRequest
- AConsumer
that will call methods onUntagResourceRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UntagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- InternalServerException Sends an Internal Failure exception.
- ValidationException Sends a validation exception.
- ResourceNotFoundException Sends a Resource Not Found exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
updateSuiteDefinition
default CompletableFuture<UpdateSuiteDefinitionResponse> updateSuiteDefinition(UpdateSuiteDefinitionRequest updateSuiteDefinitionRequest) Updates a Device Advisor test suite.
Requires permission to access the UpdateSuiteDefinition action.
- Parameters:
updateSuiteDefinitionRequest
-- Returns:
- A Java Future containing the result of the UpdateSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
updateSuiteDefinition
default CompletableFuture<UpdateSuiteDefinitionResponse> updateSuiteDefinition(Consumer<UpdateSuiteDefinitionRequest.Builder> updateSuiteDefinitionRequest) Updates a Device Advisor test suite.
Requires permission to access the UpdateSuiteDefinition action.
This is a convenience which creates an instance of the
UpdateSuiteDefinitionRequest.Builder
avoiding the need to create one manually viaUpdateSuiteDefinitionRequest.builder()
- Parameters:
updateSuiteDefinitionRequest
- AConsumer
that will call methods onUpdateSuiteDefinitionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateSuiteDefinition operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- ValidationException Sends a validation exception.
- InternalServerException Sends an Internal Failure exception.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- IotDeviceAdvisorException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
serviceClientConfiguration
Description copied from interface:SdkClient
The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration- Specified by:
serviceClientConfiguration
in interfaceAwsClient
- Specified by:
serviceClientConfiguration
in interfaceSdkClient
- Returns:
- SdkServiceClientConfiguration
-
create
Create aIotDeviceAdvisorAsyncClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
. -
builder
Create a builder that can be used to configure and create aIotDeviceAdvisorAsyncClient
.
-