Interface LexRuntimeAsyncClient
- All Superinterfaces:
AutoCloseable
,AwsClient
,SdkAutoCloseable
,SdkClient
builder()
method.The asynchronous client performs non-blocking I/O when configured with any
SdkAsyncHttpClient
supported in the SDK. However, full non-blocking is not guaranteed as the async client may
perform blocking calls in some cases such as credentials retrieval and endpoint discovery as part of the async API
call.
Amazon Lex provides both build and runtime endpoints. Each endpoint provides a set of operations (API). Your conversational bot uses the runtime API to understand user utterances (user input text or voice). For example, suppose a user says "I want pizza", your bot sends this input to Amazon Lex using the runtime API. Amazon Lex recognizes that the user request is for the OrderPizza intent (one of the intents defined in the bot). Then Amazon Lex engages in user conversation on behalf of the bot to elicit required information (slot values, such as pizza size and crust type), and then performs fulfillment activity (that you configured when you created the bot). You use the build-time API to create and manage your Amazon Lex bot. For a list of build-time operations, see the build-time API, .
-
Field Summary
Modifier and TypeFieldDescriptionstatic final String
Value for looking up the service's metadata from theServiceMetadataProvider
.static final String
-
Method Summary
Modifier and TypeMethodDescriptionstatic LexRuntimeAsyncClientBuilder
builder()
Create a builder that can be used to configure and create aLexRuntimeAsyncClient
.static LexRuntimeAsyncClient
create()
Create aLexRuntimeAsyncClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
.default CompletableFuture
<DeleteSessionResponse> deleteSession
(Consumer<DeleteSessionRequest.Builder> deleteSessionRequest) Removes session information for a specified bot, alias, and user ID.default CompletableFuture
<DeleteSessionResponse> deleteSession
(DeleteSessionRequest deleteSessionRequest) Removes session information for a specified bot, alias, and user ID.default CompletableFuture
<GetSessionResponse> getSession
(Consumer<GetSessionRequest.Builder> getSessionRequest) Returns session information for a specified bot, alias, and user ID.default CompletableFuture
<GetSessionResponse> getSession
(GetSessionRequest getSessionRequest) Returns session information for a specified bot, alias, and user ID.default CompletableFuture
<PostContentResponse> postContent
(Consumer<PostContentRequest.Builder> postContentRequest, Path sourcePath, Path destinationPath) Sends user input (text or speech) to Amazon Lex.default <ReturnT> CompletableFuture
<ReturnT> postContent
(Consumer<PostContentRequest.Builder> postContentRequest, AsyncRequestBody requestBody, AsyncResponseTransformer<PostContentResponse, ReturnT> asyncResponseTransformer) Sends user input (text or speech) to Amazon Lex.default CompletableFuture
<PostContentResponse> postContent
(PostContentRequest postContentRequest, Path sourcePath, Path destinationPath) Sends user input (text or speech) to Amazon Lex.default <ReturnT> CompletableFuture
<ReturnT> postContent
(PostContentRequest postContentRequest, AsyncRequestBody requestBody, AsyncResponseTransformer<PostContentResponse, ReturnT> asyncResponseTransformer) Sends user input (text or speech) to Amazon Lex.default CompletableFuture
<PostTextResponse> postText
(Consumer<PostTextRequest.Builder> postTextRequest) Sends user input to Amazon Lex.default CompletableFuture
<PostTextResponse> postText
(PostTextRequest postTextRequest) Sends user input to Amazon Lex.default CompletableFuture
<PutSessionResponse> putSession
(Consumer<PutSessionRequest.Builder> putSessionRequest, Path destinationPath) Creates a new session or modifies an existing session with an Amazon Lex bot.default <ReturnT> CompletableFuture
<ReturnT> putSession
(Consumer<PutSessionRequest.Builder> putSessionRequest, AsyncResponseTransformer<PutSessionResponse, ReturnT> asyncResponseTransformer) Creates a new session or modifies an existing session with an Amazon Lex bot.default CompletableFuture
<PutSessionResponse> putSession
(PutSessionRequest putSessionRequest, Path destinationPath) Creates a new session or modifies an existing session with an Amazon Lex bot.default <ReturnT> CompletableFuture
<ReturnT> putSession
(PutSessionRequest putSessionRequest, AsyncResponseTransformer<PutSessionResponse, ReturnT> asyncResponseTransformer) Creates a new session or modifies an existing session with an Amazon Lex bot.The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfigurationMethods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close
Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName
-
Field Details
-
SERVICE_NAME
- See Also:
-
SERVICE_METADATA_ID
Value for looking up the service's metadata from theServiceMetadataProvider
.- See Also:
-
-
Method Details
-
deleteSession
default CompletableFuture<DeleteSessionResponse> deleteSession(DeleteSessionRequest deleteSessionRequest) Removes session information for a specified bot, alias, and user ID.
- Parameters:
deleteSessionRequest
-- Returns:
- A Java Future containing the result of the DeleteSession operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
deleteSession
default CompletableFuture<DeleteSessionResponse> deleteSession(Consumer<DeleteSessionRequest.Builder> deleteSessionRequest) Removes session information for a specified bot, alias, and user ID.
This is a convenience which creates an instance of the
DeleteSessionRequest.Builder
avoiding the need to create one manually viaDeleteSessionRequest.builder()
- Parameters:
deleteSessionRequest
- AConsumer
that will call methods onDeleteSessionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteSession operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSession
Returns session information for a specified bot, alias, and user ID.
- Parameters:
getSessionRequest
-- Returns:
- A Java Future containing the result of the GetSession operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getSession
default CompletableFuture<GetSessionResponse> getSession(Consumer<GetSessionRequest.Builder> getSessionRequest) Returns session information for a specified bot, alias, and user ID.
This is a convenience which creates an instance of the
GetSessionRequest.Builder
avoiding the need to create one manually viaGetSessionRequest.builder()
- Parameters:
getSessionRequest
- AConsumer
that will call methods onGetSessionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the GetSession operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
postContent
default <ReturnT> CompletableFuture<ReturnT> postContent(PostContentRequest postContentRequest, AsyncRequestBody requestBody, AsyncResponseTransformer<PostContentResponse, ReturnT> asyncResponseTransformer) Sends user input (text or speech) to Amazon Lex. Clients use this API to send text and audio requests to Amazon Lex at runtime. Amazon Lex interprets the user input using the machine learning model that it built for the bot.
The
PostContent
operation supports audio input at 8kHz and 16kHz. You can use 8kHz audio to achieve higher speech recognition accuracy in telephone audio applications.In response, Amazon Lex returns the next message to convey to the user. Consider the following example messages:
-
For a user input "I would like a pizza," Amazon Lex might return a response with a message eliciting slot data (for example,
PizzaSize
): "What size pizza would you like?". -
After the user provides all of the pizza order information, Amazon Lex might return a response with a message to get user confirmation: "Order the pizza?".
-
After the user replies "Yes" to the confirmation prompt, Amazon Lex might return a conclusion statement: "Thank you, your cheese pizza has been ordered.".
Not all Amazon Lex messages require a response from the user. For example, conclusion statements do not require a response. Some messages require only a yes or no response. In addition to the
message
, Amazon Lex provides additional context about the message in the response that you can use to enhance client behavior, such as displaying the appropriate client user interface. Consider the following examples:-
If the message is to elicit slot data, Amazon Lex returns the following context information:
-
x-amz-lex-dialog-state
header set toElicitSlot
-
x-amz-lex-intent-name
header set to the intent name in the current context -
x-amz-lex-slot-to-elicit
header set to the slot name for which themessage
is eliciting information -
x-amz-lex-slots
header set to a map of slots configured for the intent with their current values
-
-
If the message is a confirmation prompt, the
x-amz-lex-dialog-state
header is set toConfirmation
and thex-amz-lex-slot-to-elicit
header is omitted. -
If the message is a clarification prompt configured for the intent, indicating that the user intent is not understood, the
x-amz-dialog-state
header is set toElicitIntent
and thex-amz-slot-to-elicit
header is omitted.
In addition, Amazon Lex also returns your application-specific
sessionAttributes
. For more information, see Managing Conversation Context.- Parameters:
postContentRequest
-requestBody
- Functional interface that can be implemented to produce the request content in a non-blocking manner. The size of the content is expected to be known up front. SeeAsyncRequestBody
for specific details on implementing this interface as well as links to precanned implementations for common scenarios like uploading from a file. The service documentation for the request content is as follows 'User input in PCM or Opus audio format or text format as described in the
Content-Type
HTTP header.You can stream audio data to Amazon Lex or you can create a local buffer that captures all of the audio data before sending. In general, you get better performance if you stream audio data rather than buffering the data locally.
'asyncResponseTransformer
- The response transformer for processing the streaming response in a non-blocking manner. SeeAsyncResponseTransformer
for details on how this callback should be implemented and for links to precanned implementations for common scenarios like downloading to a file. The service documentation for the response content is as follows 'The prompt (or statement) to convey to the user. This is based on the bot configuration and context. For example, if Amazon Lex did not understand the user intent, it sends the
'.clarificationPrompt
configured for the bot. If the intent requires confirmation before taking the fulfillment action, it sends theconfirmationPrompt
. Another example: Suppose that the Lambda function successfully fulfilled the intent, and sent a message to convey to the user. Then Amazon Lex sends that message in the response.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- UnsupportedMediaTypeException The Content-Type header (
PostContent
API) has an invalid value. - NotAcceptableException The accept header in the request does not have a valid value.
- RequestTimeoutException The input speech is too long.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- LoopDetectedException This exception is not used.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
-
postContent
default <ReturnT> CompletableFuture<ReturnT> postContent(Consumer<PostContentRequest.Builder> postContentRequest, AsyncRequestBody requestBody, AsyncResponseTransformer<PostContentResponse, ReturnT> asyncResponseTransformer) Sends user input (text or speech) to Amazon Lex. Clients use this API to send text and audio requests to Amazon Lex at runtime. Amazon Lex interprets the user input using the machine learning model that it built for the bot.
The
PostContent
operation supports audio input at 8kHz and 16kHz. You can use 8kHz audio to achieve higher speech recognition accuracy in telephone audio applications.In response, Amazon Lex returns the next message to convey to the user. Consider the following example messages:
-
For a user input "I would like a pizza," Amazon Lex might return a response with a message eliciting slot data (for example,
PizzaSize
): "What size pizza would you like?". -
After the user provides all of the pizza order information, Amazon Lex might return a response with a message to get user confirmation: "Order the pizza?".
-
After the user replies "Yes" to the confirmation prompt, Amazon Lex might return a conclusion statement: "Thank you, your cheese pizza has been ordered.".
Not all Amazon Lex messages require a response from the user. For example, conclusion statements do not require a response. Some messages require only a yes or no response. In addition to the
message
, Amazon Lex provides additional context about the message in the response that you can use to enhance client behavior, such as displaying the appropriate client user interface. Consider the following examples:-
If the message is to elicit slot data, Amazon Lex returns the following context information:
-
x-amz-lex-dialog-state
header set toElicitSlot
-
x-amz-lex-intent-name
header set to the intent name in the current context -
x-amz-lex-slot-to-elicit
header set to the slot name for which themessage
is eliciting information -
x-amz-lex-slots
header set to a map of slots configured for the intent with their current values
-
-
If the message is a confirmation prompt, the
x-amz-lex-dialog-state
header is set toConfirmation
and thex-amz-lex-slot-to-elicit
header is omitted. -
If the message is a clarification prompt configured for the intent, indicating that the user intent is not understood, the
x-amz-dialog-state
header is set toElicitIntent
and thex-amz-slot-to-elicit
header is omitted.
In addition, Amazon Lex also returns your application-specific
sessionAttributes
. For more information, see Managing Conversation Context.
This is a convenience which creates an instance of the
PostContentRequest.Builder
avoiding the need to create one manually viaPostContentRequest.builder()
- Parameters:
postContentRequest
- AConsumer
that will call methods onPostContentRequest.Builder
to create a request.requestBody
- Functional interface that can be implemented to produce the request content in a non-blocking manner. The size of the content is expected to be known up front. SeeAsyncRequestBody
for specific details on implementing this interface as well as links to precanned implementations for common scenarios like uploading from a file. The service documentation for the request content is as follows 'User input in PCM or Opus audio format or text format as described in the
Content-Type
HTTP header.You can stream audio data to Amazon Lex or you can create a local buffer that captures all of the audio data before sending. In general, you get better performance if you stream audio data rather than buffering the data locally.
'asyncResponseTransformer
- The response transformer for processing the streaming response in a non-blocking manner. SeeAsyncResponseTransformer
for details on how this callback should be implemented and for links to precanned implementations for common scenarios like downloading to a file. The service documentation for the response content is as follows 'The prompt (or statement) to convey to the user. This is based on the bot configuration and context. For example, if Amazon Lex did not understand the user intent, it sends the
'.clarificationPrompt
configured for the bot. If the intent requires confirmation before taking the fulfillment action, it sends theconfirmationPrompt
. Another example: Suppose that the Lambda function successfully fulfilled the intent, and sent a message to convey to the user. Then Amazon Lex sends that message in the response.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- UnsupportedMediaTypeException The Content-Type header (
PostContent
API) has an invalid value. - NotAcceptableException The accept header in the request does not have a valid value.
- RequestTimeoutException The input speech is too long.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- LoopDetectedException This exception is not used.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
-
postContent
default CompletableFuture<PostContentResponse> postContent(PostContentRequest postContentRequest, Path sourcePath, Path destinationPath) Sends user input (text or speech) to Amazon Lex. Clients use this API to send text and audio requests to Amazon Lex at runtime. Amazon Lex interprets the user input using the machine learning model that it built for the bot.
The
PostContent
operation supports audio input at 8kHz and 16kHz. You can use 8kHz audio to achieve higher speech recognition accuracy in telephone audio applications.In response, Amazon Lex returns the next message to convey to the user. Consider the following example messages:
-
For a user input "I would like a pizza," Amazon Lex might return a response with a message eliciting slot data (for example,
PizzaSize
): "What size pizza would you like?". -
After the user provides all of the pizza order information, Amazon Lex might return a response with a message to get user confirmation: "Order the pizza?".
-
After the user replies "Yes" to the confirmation prompt, Amazon Lex might return a conclusion statement: "Thank you, your cheese pizza has been ordered.".
Not all Amazon Lex messages require a response from the user. For example, conclusion statements do not require a response. Some messages require only a yes or no response. In addition to the
message
, Amazon Lex provides additional context about the message in the response that you can use to enhance client behavior, such as displaying the appropriate client user interface. Consider the following examples:-
If the message is to elicit slot data, Amazon Lex returns the following context information:
-
x-amz-lex-dialog-state
header set toElicitSlot
-
x-amz-lex-intent-name
header set to the intent name in the current context -
x-amz-lex-slot-to-elicit
header set to the slot name for which themessage
is eliciting information -
x-amz-lex-slots
header set to a map of slots configured for the intent with their current values
-
-
If the message is a confirmation prompt, the
x-amz-lex-dialog-state
header is set toConfirmation
and thex-amz-lex-slot-to-elicit
header is omitted. -
If the message is a clarification prompt configured for the intent, indicating that the user intent is not understood, the
x-amz-dialog-state
header is set toElicitIntent
and thex-amz-slot-to-elicit
header is omitted.
In addition, Amazon Lex also returns your application-specific
sessionAttributes
. For more information, see Managing Conversation Context.- Parameters:
postContentRequest
-sourcePath
-Path
to file containing data to send to the service. File will be read entirely and may be read multiple times in the event of a retry. If the file does not exist or the current user does not have access to read it then an exception will be thrown. The service documentation for the request content is as follows 'User input in PCM or Opus audio format or text format as described in the
Content-Type
HTTP header.You can stream audio data to Amazon Lex or you can create a local buffer that captures all of the audio data before sending. In general, you get better performance if you stream audio data rather than buffering the data locally.
'destinationPath
-Path
to file that response contents will be written to. The file must not exist or this method will throw an exception. If the file is not writable by the current user then an exception will be thrown. The service documentation for the response content is as follows 'The prompt (or statement) to convey to the user. This is based on the bot configuration and context. For example, if Amazon Lex did not understand the user intent, it sends the
'.clarificationPrompt
configured for the bot. If the intent requires confirmation before taking the fulfillment action, it sends theconfirmationPrompt
. Another example: Suppose that the Lambda function successfully fulfilled the intent, and sent a message to convey to the user. Then Amazon Lex sends that message in the response.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- UnsupportedMediaTypeException The Content-Type header (
PostContent
API) has an invalid value. - NotAcceptableException The accept header in the request does not have a valid value.
- RequestTimeoutException The input speech is too long.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- LoopDetectedException This exception is not used.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
-
postContent
default CompletableFuture<PostContentResponse> postContent(Consumer<PostContentRequest.Builder> postContentRequest, Path sourcePath, Path destinationPath) Sends user input (text or speech) to Amazon Lex. Clients use this API to send text and audio requests to Amazon Lex at runtime. Amazon Lex interprets the user input using the machine learning model that it built for the bot.
The
PostContent
operation supports audio input at 8kHz and 16kHz. You can use 8kHz audio to achieve higher speech recognition accuracy in telephone audio applications.In response, Amazon Lex returns the next message to convey to the user. Consider the following example messages:
-
For a user input "I would like a pizza," Amazon Lex might return a response with a message eliciting slot data (for example,
PizzaSize
): "What size pizza would you like?". -
After the user provides all of the pizza order information, Amazon Lex might return a response with a message to get user confirmation: "Order the pizza?".
-
After the user replies "Yes" to the confirmation prompt, Amazon Lex might return a conclusion statement: "Thank you, your cheese pizza has been ordered.".
Not all Amazon Lex messages require a response from the user. For example, conclusion statements do not require a response. Some messages require only a yes or no response. In addition to the
message
, Amazon Lex provides additional context about the message in the response that you can use to enhance client behavior, such as displaying the appropriate client user interface. Consider the following examples:-
If the message is to elicit slot data, Amazon Lex returns the following context information:
-
x-amz-lex-dialog-state
header set toElicitSlot
-
x-amz-lex-intent-name
header set to the intent name in the current context -
x-amz-lex-slot-to-elicit
header set to the slot name for which themessage
is eliciting information -
x-amz-lex-slots
header set to a map of slots configured for the intent with their current values
-
-
If the message is a confirmation prompt, the
x-amz-lex-dialog-state
header is set toConfirmation
and thex-amz-lex-slot-to-elicit
header is omitted. -
If the message is a clarification prompt configured for the intent, indicating that the user intent is not understood, the
x-amz-dialog-state
header is set toElicitIntent
and thex-amz-slot-to-elicit
header is omitted.
In addition, Amazon Lex also returns your application-specific
sessionAttributes
. For more information, see Managing Conversation Context.
This is a convenience which creates an instance of the
PostContentRequest.Builder
avoiding the need to create one manually viaPostContentRequest.builder()
- Parameters:
postContentRequest
- AConsumer
that will call methods onPostContentRequest.Builder
to create a request.sourcePath
-Path
to file containing data to send to the service. File will be read entirely and may be read multiple times in the event of a retry. If the file does not exist or the current user does not have access to read it then an exception will be thrown. The service documentation for the request content is as follows 'User input in PCM or Opus audio format or text format as described in the
Content-Type
HTTP header.You can stream audio data to Amazon Lex or you can create a local buffer that captures all of the audio data before sending. In general, you get better performance if you stream audio data rather than buffering the data locally.
'destinationPath
-Path
to file that response contents will be written to. The file must not exist or this method will throw an exception. If the file is not writable by the current user then an exception will be thrown. The service documentation for the response content is as follows 'The prompt (or statement) to convey to the user. This is based on the bot configuration and context. For example, if Amazon Lex did not understand the user intent, it sends the
'.clarificationPrompt
configured for the bot. If the intent requires confirmation before taking the fulfillment action, it sends theconfirmationPrompt
. Another example: Suppose that the Lambda function successfully fulfilled the intent, and sent a message to convey to the user. Then Amazon Lex sends that message in the response.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- UnsupportedMediaTypeException The Content-Type header (
PostContent
API) has an invalid value. - NotAcceptableException The accept header in the request does not have a valid value.
- RequestTimeoutException The input speech is too long.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- LoopDetectedException This exception is not used.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
-
postText
Sends user input to Amazon Lex. Client applications can use this API to send requests to Amazon Lex at runtime. Amazon Lex then interprets the user input using the machine learning model it built for the bot.
In response, Amazon Lex returns the next
message
to convey to the user an optionalresponseCard
to display. Consider the following example messages:-
For a user input "I would like a pizza", Amazon Lex might return a response with a message eliciting slot data (for example, PizzaSize): "What size pizza would you like?"
-
After the user provides all of the pizza order information, Amazon Lex might return a response with a message to obtain user confirmation "Proceed with the pizza order?".
-
After the user replies to a confirmation prompt with a "yes", Amazon Lex might return a conclusion statement: "Thank you, your cheese pizza has been ordered.".
Not all Amazon Lex messages require a user response. For example, a conclusion statement does not require a response. Some messages require only a "yes" or "no" user response. In addition to the
message
, Amazon Lex provides additional context about the message in the response that you might use to enhance client behavior, for example, to display the appropriate client user interface. These are theslotToElicit
,dialogState
,intentName
, andslots
fields in the response. Consider the following examples:-
If the message is to elicit slot data, Amazon Lex returns the following context information:
-
dialogState
set to ElicitSlot -
intentName
set to the intent name in the current context -
slotToElicit
set to the slot name for which themessage
is eliciting information -
slots
set to a map of slots, configured for the intent, with currently known values
-
-
If the message is a confirmation prompt, the
dialogState
is set to ConfirmIntent andSlotToElicit
is set to null. -
If the message is a clarification prompt (configured for the intent) that indicates that user intent is not understood, the
dialogState
is set to ElicitIntent andslotToElicit
is set to null.
In addition, Amazon Lex also returns your application-specific
sessionAttributes
. For more information, see Managing Conversation Context.- Parameters:
postTextRequest
-- Returns:
- A Java Future containing the result of the PostText operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- LoopDetectedException This exception is not used.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
-
postText
default CompletableFuture<PostTextResponse> postText(Consumer<PostTextRequest.Builder> postTextRequest) Sends user input to Amazon Lex. Client applications can use this API to send requests to Amazon Lex at runtime. Amazon Lex then interprets the user input using the machine learning model it built for the bot.
In response, Amazon Lex returns the next
message
to convey to the user an optionalresponseCard
to display. Consider the following example messages:-
For a user input "I would like a pizza", Amazon Lex might return a response with a message eliciting slot data (for example, PizzaSize): "What size pizza would you like?"
-
After the user provides all of the pizza order information, Amazon Lex might return a response with a message to obtain user confirmation "Proceed with the pizza order?".
-
After the user replies to a confirmation prompt with a "yes", Amazon Lex might return a conclusion statement: "Thank you, your cheese pizza has been ordered.".
Not all Amazon Lex messages require a user response. For example, a conclusion statement does not require a response. Some messages require only a "yes" or "no" user response. In addition to the
message
, Amazon Lex provides additional context about the message in the response that you might use to enhance client behavior, for example, to display the appropriate client user interface. These are theslotToElicit
,dialogState
,intentName
, andslots
fields in the response. Consider the following examples:-
If the message is to elicit slot data, Amazon Lex returns the following context information:
-
dialogState
set to ElicitSlot -
intentName
set to the intent name in the current context -
slotToElicit
set to the slot name for which themessage
is eliciting information -
slots
set to a map of slots, configured for the intent, with currently known values
-
-
If the message is a confirmation prompt, the
dialogState
is set to ConfirmIntent andSlotToElicit
is set to null. -
If the message is a clarification prompt (configured for the intent) that indicates that user intent is not understood, the
dialogState
is set to ElicitIntent andslotToElicit
is set to null.
In addition, Amazon Lex also returns your application-specific
sessionAttributes
. For more information, see Managing Conversation Context.
This is a convenience which creates an instance of the
PostTextRequest.Builder
avoiding the need to create one manually viaPostTextRequest.builder()
- Parameters:
postTextRequest
- AConsumer
that will call methods onPostTextRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the PostText operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- LoopDetectedException This exception is not used.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
-
putSession
default <ReturnT> CompletableFuture<ReturnT> putSession(PutSessionRequest putSessionRequest, AsyncResponseTransformer<PutSessionResponse, ReturnT> asyncResponseTransformer) Creates a new session or modifies an existing session with an Amazon Lex bot. Use this operation to enable your application to set the state of the bot.
For more information, see Managing Sessions.
- Parameters:
putSessionRequest
-asyncResponseTransformer
- The response transformer for processing the streaming response in a non-blocking manner. SeeAsyncResponseTransformer
for details on how this callback should be implemented and for links to precanned implementations for common scenarios like downloading to a file. The service documentation for the response content is as follows 'The audio version of the message to convey to the user.
'.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- NotAcceptableException The accept header in the request does not have a valid value.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
putSession
default <ReturnT> CompletableFuture<ReturnT> putSession(Consumer<PutSessionRequest.Builder> putSessionRequest, AsyncResponseTransformer<PutSessionResponse, ReturnT> asyncResponseTransformer) Creates a new session or modifies an existing session with an Amazon Lex bot. Use this operation to enable your application to set the state of the bot.
For more information, see Managing Sessions.
This is a convenience which creates an instance of the
PutSessionRequest.Builder
avoiding the need to create one manually viaPutSessionRequest.builder()
- Parameters:
putSessionRequest
- AConsumer
that will call methods onPutSessionRequest.Builder
to create a request.asyncResponseTransformer
- The response transformer for processing the streaming response in a non-blocking manner. SeeAsyncResponseTransformer
for details on how this callback should be implemented and for links to precanned implementations for common scenarios like downloading to a file. The service documentation for the response content is as follows 'The audio version of the message to convey to the user.
'.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- NotAcceptableException The accept header in the request does not have a valid value.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
putSession
default CompletableFuture<PutSessionResponse> putSession(PutSessionRequest putSessionRequest, Path destinationPath) Creates a new session or modifies an existing session with an Amazon Lex bot. Use this operation to enable your application to set the state of the bot.
For more information, see Managing Sessions.
- Parameters:
putSessionRequest
-destinationPath
-Path
to file that response contents will be written to. The file must not exist or this method will throw an exception. If the file is not writable by the current user then an exception will be thrown. The service documentation for the response content is as follows 'The audio version of the message to convey to the user.
'.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- NotAcceptableException The accept header in the request does not have a valid value.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
putSession
default CompletableFuture<PutSessionResponse> putSession(Consumer<PutSessionRequest.Builder> putSessionRequest, Path destinationPath) Creates a new session or modifies an existing session with an Amazon Lex bot. Use this operation to enable your application to set the state of the bot.
For more information, see Managing Sessions.
This is a convenience which creates an instance of the
PutSessionRequest.Builder
avoiding the need to create one manually viaPutSessionRequest.builder()
- Parameters:
putSessionRequest
- AConsumer
that will call methods onPutSessionRequest.Builder
to create a request.destinationPath
-Path
to file that response contents will be written to. The file must not exist or this method will throw an exception. If the file is not writable by the current user then an exception will be thrown. The service documentation for the response content is as follows 'The audio version of the message to convey to the user.
'.- Returns:
- A future to the transformed result of the AsyncResponseTransformer.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()
to retrieve the underlying exception.- NotFoundException The resource (such as the Amazon Lex bot or an alias) that is referred to is not found.
- BadRequestException Request validation failed, there is no usable message in the context, or the bot build failed, is still in progress, or contains unbuilt changes.
- LimitExceededException Exceeded a limit.
- InternalFailureException Internal service error. Retry the call.
- ConflictException Two clients are using the same AWS account, Amazon Lex bot, and user ID.
- NotAcceptableException The accept header in the request does not have a valid value.
- DependencyFailedException One of the dependencies, such as AWS Lambda or Amazon Polly, threw an
exception. For example,
-
If Amazon Lex does not have sufficient permissions to call a Lambda function.
-
If a Lambda function takes longer than 30 seconds to execute.
-
If a fulfillment Lambda function returns a
Delegate
dialog action without removing any slot values.
-
- BadGatewayException Either the Amazon Lex bot is still building, or one of the dependent services (Amazon Polly, AWS Lambda) failed with an internal service error.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- LexRuntimeException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
serviceClientConfiguration
Description copied from interface:SdkClient
The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration- Specified by:
serviceClientConfiguration
in interfaceAwsClient
- Specified by:
serviceClientConfiguration
in interfaceSdkClient
- Returns:
- SdkServiceClientConfiguration
-
create
Create aLexRuntimeAsyncClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
. -
builder
Create a builder that can be used to configure and create aLexRuntimeAsyncClient
.
-