Class Eac3AtmosSettings
- All Implemented Interfaces:
Serializable
,SdkPojo
,ToCopyableBuilder<Eac3AtmosSettings.Builder,
Eac3AtmosSettings>
- See Also:
-
Nested Class Summary
-
Method Summary
Modifier and TypeMethodDescriptionfinal Integer
bitrate()
Specify the average bitrate for this output in bits per second.final Eac3AtmosBitstreamMode
Specify the bitstream mode for the E-AC-3 stream that the encoder emits.final String
Specify the bitstream mode for the E-AC-3 stream that the encoder emits.static Eac3AtmosSettings.Builder
builder()
final Eac3AtmosCodingMode
The coding mode for Dolby Digital Plus JOC (Atmos).final String
The coding mode for Dolby Digital Plus JOC (Atmos).Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.final String
Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.final Eac3AtmosDownmixControl
Specify whether MediaConvert should use any downmix metadata from your input file.final String
Specify whether MediaConvert should use any downmix metadata from your input file.Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode.final String
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode.Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode.final String
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode.Specify whether MediaConvert should use any dynamic range control metadata from your input file.final String
Specify whether MediaConvert should use any dynamic range control metadata from your input file.final boolean
final boolean
equalsBySdkFields
(Object obj) Indicates whether some other object is "equal to" this one by SDK fields.final <T> Optional
<T> getValueForField
(String fieldName, Class<T> clazz) final int
hashCode()
final Double
Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center).final Double
Specify a value for the following Dolby Atmos setting: Left only/Right only.final Double
Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center).final Double
Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround).final Eac3AtmosMeteringMode
Choose how the service meters the loudness of your audio.final String
Choose how the service meters the loudness of your audio.final Integer
This value is always 48000.static Class
<? extends Eac3AtmosSettings.Builder> final Integer
Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness.final Eac3AtmosStereoDownmix
Choose how the service does stereo downmixing.final String
Choose how the service does stereo downmixing.final Eac3AtmosSurroundExMode
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.final String
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.Take this object and create a builder that contains all of the current property values of this object.final String
toString()
Returns a string representation of this object.Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder
copy
-
Method Details
-
bitrate
Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.- Returns:
- Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
-
bitstreamMode
Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).If the service returns an enum value that is not available in the current SDK version,
bitstreamMode
will returnEac3AtmosBitstreamMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frombitstreamModeAsString()
.- Returns:
- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
- See Also:
-
bitstreamModeAsString
Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).If the service returns an enum value that is not available in the current SDK version,
bitstreamMode
will returnEac3AtmosBitstreamMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frombitstreamModeAsString()
.- Returns:
- Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
- See Also:
-
codingMode
The coding mode for Dolby Digital Plus JOC (Atmos).If the service returns an enum value that is not available in the current SDK version,
codingMode
will returnEac3AtmosCodingMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromcodingModeAsString()
.- Returns:
- The coding mode for Dolby Digital Plus JOC (Atmos).
- See Also:
-
codingModeAsString
The coding mode for Dolby Digital Plus JOC (Atmos).If the service returns an enum value that is not available in the current SDK version,
codingMode
will returnEac3AtmosCodingMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromcodingModeAsString()
.- Returns:
- The coding mode for Dolby Digital Plus JOC (Atmos).
- See Also:
-
dialogueIntelligence
Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.If the service returns an enum value that is not available in the current SDK version,
dialogueIntelligence
will returnEac3AtmosDialogueIntelligence.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdialogueIntelligenceAsString()
.- Returns:
- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
- See Also:
-
dialogueIntelligenceAsString
Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.If the service returns an enum value that is not available in the current SDK version,
dialogueIntelligence
will returnEac3AtmosDialogueIntelligence.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdialogueIntelligenceAsString()
.- Returns:
- Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
- See Also:
-
downmixControl
Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.If the service returns an enum value that is not available in the current SDK version,
downmixControl
will returnEac3AtmosDownmixControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdownmixControlAsString()
.- Returns:
- Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
- See Also:
-
downmixControlAsString
Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.If the service returns an enum value that is not available in the current SDK version,
downmixControl
will returnEac3AtmosDownmixControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdownmixControlAsString()
.- Returns:
- Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
- See Also:
-
dynamicRangeCompressionLine
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.If the service returns an enum value that is not available in the current SDK version,
dynamicRangeCompressionLine
will returnEac3AtmosDynamicRangeCompressionLine.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdynamicRangeCompressionLineAsString()
.- Returns:
- Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
- See Also:
-
dynamicRangeCompressionLineAsString
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.If the service returns an enum value that is not available in the current SDK version,
dynamicRangeCompressionLine
will returnEac3AtmosDynamicRangeCompressionLine.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdynamicRangeCompressionLineAsString()
.- Returns:
- Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
- See Also:
-
dynamicRangeCompressionRf
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.If the service returns an enum value that is not available in the current SDK version,
dynamicRangeCompressionRf
will returnEac3AtmosDynamicRangeCompressionRf.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdynamicRangeCompressionRfAsString()
.- Returns:
- Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
- See Also:
-
dynamicRangeCompressionRfAsString
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.If the service returns an enum value that is not available in the current SDK version,
dynamicRangeCompressionRf
will returnEac3AtmosDynamicRangeCompressionRf.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdynamicRangeCompressionRfAsString()
.- Returns:
- Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
- See Also:
-
dynamicRangeControl
Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.If the service returns an enum value that is not available in the current SDK version,
dynamicRangeControl
will returnEac3AtmosDynamicRangeControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdynamicRangeControlAsString()
.- Returns:
- Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
- See Also:
-
dynamicRangeControlAsString
Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.If the service returns an enum value that is not available in the current SDK version,
dynamicRangeControl
will returnEac3AtmosDynamicRangeControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdynamicRangeControlAsString()
.- Returns:
- Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
- See Also:
-
loRoCenterMixLevel
Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only center.- Returns:
- Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only center.
-
loRoSurroundMixLevel
Specify a value for the following Dolby Atmos setting: Left only/Right only. MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only surround.- Returns:
- Specify a value for the following Dolby Atmos setting: Left only/Right only. MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only surround.
-
ltRtCenterMixLevel
Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left total/Right total center.- Returns:
- Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left total/Right total center.
-
ltRtSurroundMixLevel
Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, the service ignores Left total/Right total surround.- Returns:
- Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, the service ignores Left total/Right total surround.
-
meteringMode
Choose how the service meters the loudness of your audio.If the service returns an enum value that is not available in the current SDK version,
meteringMode
will returnEac3AtmosMeteringMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frommeteringModeAsString()
.- Returns:
- Choose how the service meters the loudness of your audio.
- See Also:
-
meteringModeAsString
Choose how the service meters the loudness of your audio.If the service returns an enum value that is not available in the current SDK version,
meteringMode
will returnEac3AtmosMeteringMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frommeteringModeAsString()
.- Returns:
- Choose how the service meters the loudness of your audio.
- See Also:
-
sampleRate
This value is always 48000. It represents the sample rate in Hz.- Returns:
- This value is always 48000. It represents the sample rate in Hz.
-
speechThreshold
Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%- Returns:
- Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
-
stereoDownmix
Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.If the service returns an enum value that is not available in the current SDK version,
stereoDownmix
will returnEac3AtmosStereoDownmix.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromstereoDownmixAsString()
.- Returns:
- Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.
- See Also:
-
stereoDownmixAsString
Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.If the service returns an enum value that is not available in the current SDK version,
stereoDownmix
will returnEac3AtmosStereoDownmix.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromstereoDownmixAsString()
.- Returns:
- Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.
- See Also:
-
surroundExMode
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.If the service returns an enum value that is not available in the current SDK version,
surroundExMode
will returnEac3AtmosSurroundExMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsurroundExModeAsString()
.- Returns:
- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
- See Also:
-
surroundExModeAsString
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.If the service returns an enum value that is not available in the current SDK version,
surroundExMode
will returnEac3AtmosSurroundExMode.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsurroundExModeAsString()
.- Returns:
- Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
- See Also:
-
toBuilder
Description copied from interface:ToCopyableBuilder
Take this object and create a builder that contains all of the current property values of this object.- Specified by:
toBuilder
in interfaceToCopyableBuilder<Eac3AtmosSettings.Builder,
Eac3AtmosSettings> - Returns:
- a builder for type T
-
builder
-
serializableBuilderClass
-
hashCode
public final int hashCode() -
equals
-
equalsBySdkFields
Description copied from interface:SdkPojo
Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in anSdkPojo
class, and is generated based on a service model.If an
SdkPojo
class does not have any inherited fields,equalsBySdkFields
andequals
are essentially the same.- Specified by:
equalsBySdkFields
in interfaceSdkPojo
- Parameters:
obj
- the object to be compared with- Returns:
- true if the other object equals to this object by sdk fields, false otherwise.
-
toString
Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value. -
getValueForField
-
sdkFields
-