Class UpdateResolverEndpointRequest
- All Implemented Interfaces:
SdkPojo
,ToCopyableBuilder<UpdateResolverEndpointRequest.Builder,
UpdateResolverEndpointRequest>
-
Nested Class Summary
-
Method Summary
Modifier and TypeMethodDescriptionbuilder()
final boolean
final boolean
equalsBySdkFields
(Object obj) Indicates whether some other object is "equal to" this one by SDK fields.final <T> Optional
<T> getValueForField
(String fieldName, Class<T> clazz) Used to retrieve the value of a field from any class that extendsSdkRequest
.final int
hashCode()
final boolean
For responses, this returns true if the service returned a value for the Protocols property.final boolean
For responses, this returns true if the service returned a value for the UpdateIpAddresses property.final String
name()
The name of the Resolver endpoint that you want to update.The protocols you want to use for the endpoint.The protocols you want to use for the endpoint.final String
The ID of the Resolver endpoint that you want to update.final ResolverEndpointType
Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.final String
Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.static Class
<? extends UpdateResolverEndpointRequest.Builder> Take this object and create a builder that contains all of the current property values of this object.final String
toString()
Returns a string representation of this object.final List
<UpdateIpAddress> Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack.Methods inherited from class software.amazon.awssdk.awscore.AwsRequest
overrideConfiguration
Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder
copy
-
Method Details
-
resolverEndpointId
The ID of the Resolver endpoint that you want to update.
- Returns:
- The ID of the Resolver endpoint that you want to update.
-
name
The name of the Resolver endpoint that you want to update.
- Returns:
- The name of the Resolver endpoint that you want to update.
-
resolverEndpointType
Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
Updating to
IPV6
type isn't currently supported.If the service returns an enum value that is not available in the current SDK version,
resolverEndpointType
will returnResolverEndpointType.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromresolverEndpointTypeAsString()
.- Returns:
- Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
Updating to
IPV6
type isn't currently supported. - See Also:
-
resolverEndpointTypeAsString
Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
Updating to
IPV6
type isn't currently supported.If the service returns an enum value that is not available in the current SDK version,
resolverEndpointType
will returnResolverEndpointType.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromresolverEndpointTypeAsString()
.- Returns:
- Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
Updating to
IPV6
type isn't currently supported. - See Also:
-
hasUpdateIpAddresses
public final boolean hasUpdateIpAddresses()For responses, this returns true if the service returned a value for the UpdateIpAddresses property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
updateIpAddresses
Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasUpdateIpAddresses()
method.- Returns:
- Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.
-
protocols
The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasProtocols()
method.- Returns:
- The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
-
-
-
hasProtocols
public final boolean hasProtocols()For responses, this returns true if the service returned a value for the Protocols property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
protocolsAsStrings
The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasProtocols()
method.- Returns:
- The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
-
-
-
toBuilder
Description copied from interface:ToCopyableBuilder
Take this object and create a builder that contains all of the current property values of this object.- Specified by:
toBuilder
in interfaceToCopyableBuilder<UpdateResolverEndpointRequest.Builder,
UpdateResolverEndpointRequest> - Specified by:
toBuilder
in classRoute53ResolverRequest
- Returns:
- a builder for type T
-
builder
-
serializableBuilderClass
-
hashCode
public final int hashCode()- Overrides:
hashCode
in classAwsRequest
-
equals
- Overrides:
equals
in classAwsRequest
-
equalsBySdkFields
Description copied from interface:SdkPojo
Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in anSdkPojo
class, and is generated based on a service model.If an
SdkPojo
class does not have any inherited fields,equalsBySdkFields
andequals
are essentially the same.- Specified by:
equalsBySdkFields
in interfaceSdkPojo
- Parameters:
obj
- the object to be compared with- Returns:
- true if the other object equals to this object by sdk fields, false otherwise.
-
toString
Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value. -
getValueForField
Description copied from class:SdkRequest
Used to retrieve the value of a field from any class that extendsSdkRequest
. The field name specified should match the member name from the corresponding service-2.json model specified in the codegen-resources folder for a given service. The class specifies what class to cast the returned value to. If the returned value is also a modeled class, theSdkRequest.getValueForField(String, Class)
method will again be available.- Overrides:
getValueForField
in classSdkRequest
- Parameters:
fieldName
- The name of the member to be retrieved.clazz
- The class to cast the returned object to.- Returns:
- Optional containing the casted return value
-
sdkFields
-