Skip to content

/AWS1/CL_S3=>COMPLETEMULTIPARTUPLOAD()

About CompleteMultipartUpload

Completes a multipart upload by assembling previously uploaded parts.

You first initiate the multipart upload and then upload all parts using the UploadPart operation or the UploadPartCopy operation. After successfully uploading all relevant parts of an upload, you call this CompleteMultipartUpload operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the CompleteMultipartUpload request, you must provide the parts list and ensure that the parts list is complete. The CompleteMultipartUpload API operation concatenates the parts that you provide in the list. For each part in the list, you must provide the PartNumber value and the ETag value that are returned after that part was uploaded.

The processing of a CompleteMultipartUpload request could take several minutes to finalize. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. The error response might be embedded in the 200 OK response. If you call this API operation directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).

Note that if CompleteMultipartUpload fails, applications should be prepared to retry any failed requests (including 500 error responses). For more information, see Amazon S3 Error Best Practices.

You can't use Content-Type: application/x-www-form-urlencoded for the CompleteMultipartUpload requests. Also, if you don't provide a Content-Type header, CompleteMultipartUpload can still return a 200 OK response.

For more information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide.

Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.

Permissions

  • General purpose bucket permissions - For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide.

  • Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the CreateSession API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see CreateSession .

Special errors

  • Error Code: EntityTooSmall

    • Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.

    • HTTP Status Code: 400 Bad Request

  • Error Code: InvalidPart

    • Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified ETag might not have matched the uploaded part's ETag.

    • HTTP Status Code: 400 Bad Request

  • Error Code: InvalidPartOrder

    • Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.

    • HTTP Status Code: 400 Bad Request

  • Error Code: NoSuchUpload

    • Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.

    • HTTP Status Code: 404 Not Found

HTTP Host header syntax

Directory buckets - The HTTP Host header syntax is Bucket_name.s3express-az_id.region.amazonaws.com.

The following operations are related to CompleteMultipartUpload:

Method Signature

IMPORTING

Required arguments:

IV_BUCKET TYPE /AWS1/S3_BUCKETNAME /AWS1/S3_BUCKETNAME

Name of the bucket to which the multipart upload was initiated.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

IV_KEY TYPE /AWS1/S3_OBJECTKEY /AWS1/S3_OBJECTKEY

Object key for which the multipart upload was initiated.

IV_UPLOADID TYPE /AWS1/S3_MULTIPARTUPLOADID /AWS1/S3_MULTIPARTUPLOADID

ID for the initiated multipart upload.

Optional arguments:

IO_MULTIPARTUPLOAD TYPE REF TO /AWS1/CL_S3_COMPLETEDMPUPLOAD /AWS1/CL_S3_COMPLETEDMPUPLOAD

The container for the multipart upload request information.

IV_CHECKSUMCRC32 TYPE /AWS1/S3_CHECKSUMCRC32 /AWS1/S3_CHECKSUMCRC32

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_CHECKSUMCRC32C TYPE /AWS1/S3_CHECKSUMCRC32C /AWS1/S3_CHECKSUMCRC32C

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_CHECKSUMSHA1 TYPE /AWS1/S3_CHECKSUMSHA1 /AWS1/S3_CHECKSUMSHA1

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_CHECKSUMSHA256 TYPE /AWS1/S3_CHECKSUMSHA256 /AWS1/S3_CHECKSUMSHA256

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_REQUESTPAYER TYPE /AWS1/S3_REQUESTPAYER /AWS1/S3_REQUESTPAYER

RequestPayer

IV_EXPECTEDBUCKETOWNER TYPE /AWS1/S3_ACCOUNTID /AWS1/S3_ACCOUNTID

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

IV_SSECUSTOMERALGORITHM TYPE /AWS1/S3_SSECUSTOMERALGORITHM /AWS1/S3_SSECUSTOMERALGORITHM

The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

IV_SSECUSTOMERKEY TYPE /AWS1/S3_SSECUSTOMERKEY /AWS1/S3_SSECUSTOMERKEY

The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

IV_SSECUSTOMERKEYMD5 TYPE /AWS1/S3_SSECUSTOMERKEYMD5 /AWS1/S3_SSECUSTOMERKEYMD5

The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

RETURNING

OO_OUTPUT TYPE REF TO /AWS1/CL_S3_COMPLMPUPLOADOUT /AWS1/CL_S3_COMPLMPUPLOADOUT