/AWS1/CL_S3=>UPLOADPART()

About UploadPart

Uploads a part in a multipart upload.

In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.

You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request.

Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.

For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.

After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.

For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .

Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.

Permissions

• General purpose bucket permissions - For information on the permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide.

• Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the CreateSession API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see CreateSession .

Data integrity

General purpose bucket - To ensure that data is not corrupted traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).

Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.

Encryption

• General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C).

  Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload.

  If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.

  • x-amz-server-side-encryption-customer-algorithm

  • x-amz-server-side-encryption-customer-key

  • x-amz-server-side-encryption-customer-key-MD5

• Directory bucket - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.

For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.

Special errors

• Error Code: NoSuchUpload

  • Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.

  • HTTP Status Code: 404 Not Found

  • SOAP Fault Code Prefix: Client

HTTP Host header syntax

Directory buckets - The HTTP Host header syntax is Bucket_name.s3express-az_id.region.amazonaws.com.

The following operations are related to UploadPart:

• CreateMultipartUpload

• CompleteMultipartUpload

• AbortMultipartUpload

• ListParts

• ListMultipartUploads

Method Signature

IMPORTING

Required arguments:

IV_BUCKET TYPE /AWS1/S3_BUCKETNAME /AWS1/S3_BUCKETNAME

The name of the bucket to which the multipart upload was initiated.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

IV_KEY TYPE /AWS1/S3_OBJECTKEY /AWS1/S3_OBJECTKEY

Object key for which the multipart upload was initiated.

IV_PARTNUMBER TYPE /AWS1/S3_PARTNUMBER /AWS1/S3_PARTNUMBER

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

IV_UPLOADID TYPE /AWS1/S3_MULTIPARTUPLOADID /AWS1/S3_MULTIPARTUPLOADID

Upload ID identifying the multipart upload whose part is being uploaded.

Optional arguments:

IV_BODY TYPE /AWS1/S3_STREAMINGBLOB /AWS1/S3_STREAMINGBLOB

Object data.

IV_CONTENTLENGTH TYPE /AWS1/S3_CONTENTLENGTH /AWS1/S3_CONTENTLENGTH

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

IV_CONTENTMD5 TYPE /AWS1/S3_CONTENTMD5 /AWS1/S3_CONTENTMD5

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

This functionality is not supported for directory buckets.

IV_CHECKSUMALGORITHM TYPE /AWS1/S3_CHECKSUMALGORITHM /AWS1/S3_CHECKSUMALGORITHM

Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

IV_CHECKSUMCRC32 TYPE /AWS1/S3_CHECKSUMCRC32 /AWS1/S3_CHECKSUMCRC32

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_CHECKSUMCRC32C TYPE /AWS1/S3_CHECKSUMCRC32C /AWS1/S3_CHECKSUMCRC32C

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_CHECKSUMSHA1 TYPE /AWS1/S3_CHECKSUMSHA1 /AWS1/S3_CHECKSUMSHA1

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_CHECKSUMSHA256 TYPE /AWS1/S3_CHECKSUMSHA256 /AWS1/S3_CHECKSUMSHA256

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

IV_SSECUSTOMERALGORITHM TYPE /AWS1/S3_SSECUSTOMERALGORITHM /AWS1/S3_SSECUSTOMERALGORITHM

Specifies the algorithm to use when encrypting the object (for example, AES256).

This functionality is not supported for directory buckets.

IV_SSECUSTOMERKEY TYPE /AWS1/S3_SSECUSTOMERKEY /AWS1/S3_SSECUSTOMERKEY

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

This functionality is not supported for directory buckets.

IV_SSECUSTOMERKEYMD5 TYPE /AWS1/S3_SSECUSTOMERKEYMD5 /AWS1/S3_SSECUSTOMERKEYMD5

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

This functionality is not supported for directory buckets.

IV_REQUESTPAYER TYPE /AWS1/S3_REQUESTPAYER /AWS1/S3_REQUESTPAYER

RequestPayer

IV_EXPECTEDBUCKETOWNER TYPE /AWS1/S3_ACCOUNTID /AWS1/S3_ACCOUNTID

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

RETURNING

OO_OUTPUT TYPE REF TO /AWS1/CL_S3_UPLOADPARTOUTPUT /AWS1/CL_S3_UPLOADPARTOUTPUT