CfnAlias

class aws_cdk.aws_kms.CfnAlias(scope, id, *, alias_name, target_key_id)

Bases: CfnResource

A CloudFormation AWS::KMS::Alias.

The AWS::KMS::Alias resource specifies a display name for a KMS key . You can use an alias to identify a KMS key in the AWS KMS console, in the DescribeKey operation, and in cryptographic operations , such as Decrypt and GenerateDataKey . .. epigraph:

Adding, deleting, or updating an alias can allow or deny permission to the KMS key. For details, see `ABAC for AWS KMS <https://docs.aws.amazon.com/kms/latest/developerguide/abac.html>`_ in the *AWS Key Management Service Developer Guide* .

Using an alias to refer to a KMS key can help you simplify key management. For example, an alias in your code can be associated with different KMS keys in different AWS Regions . For more information, see Using aliases in the AWS Key Management Service Developer Guide .

When specifying an alias, observe the following rules.

Each alias is associated with one KMS key, but multiple aliases can be associated with the same KMS key.
The alias and its associated KMS key must be in the same AWS account and Region.
The alias name must be unique in the AWS account and Region. However, you can create aliases with the same name in different AWS Regions . For example, you can have an alias/projectKey in multiple Regions, each of which is associated with a KMS key in its Region.
Each alias name must begin with alias/ followed by a name, such as alias/exampleKey . The alias name can contain only alphanumeric characters, forward slashes (/), underscores (_), and dashes (-). Alias names cannot begin with alias/aws/ . That alias name prefix is reserved for AWS managed keys .

Regions

AWS KMS CloudFormation resources are available in all AWS Regions in which AWS KMS and AWS CloudFormation are supported.

CloudformationResource:: AWS::KMS::Alias
Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-kms-alias.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_kms as kms

cfn_alias = kms.CfnAlias(self, "MyCfnAlias",
    alias_name="aliasName",
    target_key_id="targetKeyId"
)

Create a new AWS::KMS::Alias.

Parameters:

scope (Construct) –
- scope in which this resource is defined.
id (str) –
- scoped id of the resource.
alias_name (str) –
Specifies the alias name. This value must begin with alias/ followed by a name, such as alias/ExampleAlias . .. epigraph:: If you change the value of the AliasName property, the existing alias is deleted and a new alias is created for the specified KMS key. This change can disrupt applications that use the alias. It can also allow or deny access to a KMS key affected by attribute-based access control (ABAC). The alias must be string of 1-256 characters. It can contain only alphanumeric characters, forward slashes (/), underscores (_), and dashes (-). The alias name cannot begin with alias/aws/ . The alias/aws/ prefix is reserved for AWS managed keys . Pattern : ^alias/[a-zA-Z0-9/_-]+$ Minimum : 1 Maximum : 256
target_key_id (str) –
Associates the alias with the specified customer managed key . The KMS key must be in the same AWS account and Region. A valid key ID is required. If you supply a null or empty string value, this operation returns an error. For help finding the key ID and ARN, see Finding the key ID and ARN in the AWS Key Management Service Developer Guide . Specify the key ID or the key ARN of the KMS key. For example: - Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab - Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey .

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

Return type:

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:: attribute_name (str) – The name of the attribute.
Return type:: Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) –

tree inspector to collect and process attributes.

Return type:

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::KMS::Alias'

alias_name

Specifies the alias name. This value must begin with alias/ followed by a name, such as alias/ExampleAlias .

If you change the value of the AliasName property, the existing alias is deleted and a new alias is created for the specified KMS key. This change can disrupt applications that use the alias. It can also allow or deny access to a KMS key affected by attribute-based access control (ABAC).

The alias must be string of 1-256 characters. It can contain only alphanumeric characters, forward slashes (/), underscores (_), and dashes (-). The alias name cannot begin with alias/aws/ . The alias/aws/ prefix is reserved for AWS managed keys .

Pattern : ^alias/[a-zA-Z0-9/_-]+$

Minimum : 1

Maximum : 256

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-kms-alias.html#cfn-kms-alias-aliasname

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

node: The construct tree node associated with this construct.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

target_key_id

//docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk>`_ . The KMS key must be in the same AWS account and Region.

A valid key ID is required. If you supply a null or empty string value, this operation returns an error.

For help finding the key ID and ARN, see Finding the key ID and ARN in the AWS Key Management Service Developer Guide .

Specify the key ID or the key ARN of the KMS key.

For example:

Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey .

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-kms-alias.html#cfn-kms-alias-targetkeyid
Type:: Associates the alias with the specified `customer managed key <https

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_construct(x)

Return whether the given object is a Construct.

Parameters:

x (Any) –

Return type:

bool