Creating a pull through cache rule in Amazon ECR - Amazon ECR
PrerequisitesUsing the Amazon Web Services Management ConsoleUsing the Amazon CLINext steps
Services or capabilities described in Amazon Web Services documentation might vary by Region. To see the differences applicable to the China Regions, see Getting Started with Amazon Web Services in China (PDF).

Creating a pull through cache rule in Amazon ECR

For each upstream registry containing images that you want to cache in your Amazon ECR private registry, you must create a pull through cache rule.

For upstream registries that require authentication, you must store the credentials in a Secrets Manager secret. You can use an existing secret or create a new secret. You can create the Secrets Manager secret in either the Amazon ECR console or the Secrets Manager console. To create a Secrets Manager secret using the Secrets Manager console instead of the Amazon ECR console, see Storing your upstream repository credentials in an Amazon Secrets Manager secret.

Prerequisites

  • Verify that you have the proper IAM permissions to create pull through cache rules. For information, see IAM permissions required to sync an upstream registry with an Amazon ECR private registry.

  • For upstream registries that require authentication: If you want to use an existing secret, verify that the Secrets Manager secret meets the following requirements:

    • The name of the secret begins with ecr-pullthroughcache/. The Amazon Web Services Management Console only displays Secrets Manager secrets with the ecr-pullthroughcache/ prefix.

    • The account and Region that the secret is in must match the account and Region that the pull through cache rule is in.

To create a pull through cache rule (Amazon Web Services Management Console)

The following steps show how to create a pull through cache rule and a Secrets Manager secret using the Amazon ECR console. To create a secret using the Secrets Manager console, see Storing your upstream repository credentials in an Amazon Secrets Manager secret.

  1. Open the Amazon ECR console at https://console.amazonaws.cn/ecr/.

  2. From the navigation bar, choose the Region to configure your private registry settings in.

  3. In the navigation pane, choose Private registry, Pull through cache.

  4. On the Pull through cache configuration page, choose Add rule.

  5. On the Step 1: Specify a source page, for Registry, choose either Amazon ECR Public, Kubernetes, or Quay from the list of upstream registries and then choose Next.

  6. On the Step 2: Specify a destination page, for Amazon ECR repository prefix, specify the repository namespace prefix to use when caching images pulled from the source public registry and then choose Next. By default, a namespace is populated but a custom namespace can be specified as well.

  7. On the Step 3: Review and create page, review the pull through cache rule configuration and then choose Create.

  8. Repeat the previous step for each pull through cache you want to create. The pull through cache rules are created separately for each Region.

  1. Open the Amazon ECR console at https://console.amazonaws.cn/ecr/.

  2. From the navigation bar, choose the Region to configure your private registry settings in.

  3. In the navigation pane, choose Private registry, Pull through cache.

  4. On the Pull through cache configuration page, choose Add rule.

  5. On the Step 1: Specify a source page, for Registry, choose Docker Hub, Next.

  6. On the Step 2: Configure authentication page, for Upstream credentials, you must store your authentication credentials for Docker Hub in an Amazon Secrets Manager secret. You can specify an existing secret or use the Amazon ECR console to create a new secret.

    1. To use an existing secret, choose Use an existing Amazon secret. For Secret name use the drop down to select your existing secret, and then choose Next.

      Note

      The Amazon Web Services Management Console only displays Secrets Manager secrets with names using the ecr-pullthroughcache/ prefix. The secret must also be in the same account and Region that the pull through cache rule is created in.

    2. To create a new secret, choose Create an Amazon secret, do the following, then choose Next.

      1. For Secret name, specify a descriptive name for the secret. Secret names must contain 1-512 Unicode characters.

      2. For Docker Hub username, specify your Docker Hub username.

      3. For Docker Hub access token, specify your Docker Hub access token. For more information on creating a Docker Hub access token, see Create and manage access tokens in the Docker documentation.

  7. On the Step 3: Specify a destination page, for Amazon ECR repository prefix, specify the repository namespace to use when caching images pulled from the source public registry and then choose Next.

    By default, a namespace is populated but a custom namespace can be specified as well.

  8. On the Step 4: Review and create page, review the pull through cache rule configuration and then choose Create.

  9. Repeat the previous step for each pull through cache you want to create. The pull through cache rules are created separately for each Region.

  1. Open the Amazon ECR console at https://console.amazonaws.cn/ecr/.

  2. From the navigation bar, choose the Region to configure your private registry settings in.

  3. In the navigation pane, choose Private registry, Pull through cache.

  4. On the Pull through cache configuration page, choose Add rule.

  5. On the Step 1: Specify a source page, for Registry, choose GitHub Container Registry, Next.

  6. On the Step 2: Configure authentication page, for Upstream credentials, you must store your authentication credentials for GitHub Container Registry in an Amazon Secrets Manager secret. You can specify an existing secret or use the Amazon ECR console to create a new secret.

    1. To use an existing secret, choose Use an existing Amazon secret. For Secret name use the drop down to select your existing secret, and then choose Next.

      Note

      The Amazon Web Services Management Console only displays Secrets Manager secrets with names using the ecr-pullthroughcache/ prefix. The secret must also be in the same account and Region that the pull through cache rule is created in.

    2. To create a new secret, choose Create an Amazon secret, do the following, then choose Next.

      1. For Secret name, specify a descriptive name for the secret. Secret names must contain 1-512 Unicode characters.

      2. For GitHub Container Registry username, specify your GitHub Container Registry username.

      3. For GitHub Container Registry access token, specify your GitHub Container Registry access token. For more information on creating a GitHub access token, see Managing your personal access tokens in the GitHub documentation.

  7. On the Step 3: Specify a destination page, for Amazon ECR repository prefix, specify the repository namespace to use when caching images pulled from the source public registry and then choose Next.

    By default, a namespace is populated but a custom namespace can be specified as well.

  8. On the Step 4: Review and create page, review the pull through cache rule configuration and then choose Create.

  9. Repeat the previous step for each pull through cache you want to create. The pull through cache rules are created separately for each Region.

  1. Open the Amazon ECR console at https://console.amazonaws.cn/ecr/.

  2. From the navigation bar, choose the Region to configure your private registry settings in.

  3. In the navigation pane, choose Private registry, Pull through cache.

  4. On the Pull through cache configuration page, choose Add rule.

  5. On the Step 1: Specify a source page, do the following.

    1. For Registry, choose Microsoft Azure Container Registry

    2. For Source registry URL, specify the name of your Microsoft Azure container registry and then choose Next.

      Important

      You only need to specify the prefix, as the .azurecr.io suffix is populated on your behalf.

  6. On the Step 2: Configure authentication page, for Upstream credentials, you must store your authentication credentials for Microsoft Azure Container Registry in an Amazon Secrets Manager secret. You can specify an existing secret or use the Amazon ECR console to create a new secret.

    1. To use an existing secret, choose Use an existing Amazon secret. For Secret name use the drop down to select your existing secret, and then choose Next.

      Note

      The Amazon Web Services Management Console only displays Secrets Manager secrets with names using the ecr-pullthroughcache/ prefix. The secret must also be in the same account and Region that the pull through cache rule is created in.

    2. To create a new secret, choose Create an Amazon secret, do the following, then choose Next.

      1. For Secret name, specify a descriptive name for the secret. Secret names must contain 1-512 Unicode characters.

      2. For Microsoft Azure Container Registry username, specify your Microsoft Azure Container Registry username.

      3. For Microsoft Azure Container Registry access token, specify your Microsoft Azure Container Registry access token. For more information on creating an Microsoft Azure Container Registry access token, see Create token - portal in the Microsoft Azure documentation.

  7. On the Step 3: Specify a destination page, for Amazon ECR repository prefix, specify the repository namespace to use when caching images pulled from the source public registry and then choose Next.

    By default, a namespace is populated but a custom namespace can be specified as well.

  8. On the Step 4: Review and create page, review the pull through cache rule configuration and then choose Create.

  9. Repeat the previous step for each pull through cache you want to create. The pull through cache rules are created separately for each Region.

  1. Open the Amazon ECR console at https://console.amazonaws.cn/ecr/.

  2. From the navigation bar, choose the Region to configure your private registry settings in.

  3. In the navigation pane, choose Private registry, Pull through cache.

  4. On the Pull through cache configuration page, choose Add rule.

  5. On the Step 1: Specify a source page, for Registry, choose GitLab Container Registry, Next.

  6. On the Step 2: Configure authentication page, for Upstream credentials, you must store your authentication credentials for GitLab Container Registry in an Amazon Secrets Manager secret. You can specify an existing secret or use the Amazon ECR console to create a new secret.

    1. To use an existing secret, choose Use an existing Amazon secret. For Secret name use the drop down to select your existing secret, and then choose Next. For more information on creating a Secrets Manager secret using the Secrets Manager console, see Storing your upstream repository credentials in an Amazon Secrets Manager secret.

      Note

      The Amazon Web Services Management Console only displays Secrets Manager secrets with names using the ecr-pullthroughcache/ prefix. The secret must also be in the same account and Region that the pull through cache rule is created in.

    2. To create a new secret, choose Create an Amazon secret, do the following, then choose Next.

      1. For Secret name, specify a descriptive name for the secret. Secret names must contain 1-512 Unicode characters.

      2. For GitLab Container Registry username, specify your GitLab Container Registry username.

      3. For GitLab Container Registry access token, specify your GitLab Container Registry access token. For more information on creating a GitLab Container Registry access token, see Personal access tokens, Group access tokens, or Project access tokens, in the GitLab documentation.

  7. On the Step 3: Specify a destination page, for Amazon ECR repository prefix, specify the repository namespace to use when caching images pulled from the source public registry and then choose Next.

    By default, a namespace is populated but a custom namespace can be specified as well.

  8. On the Step 4: Review and create page, review the pull through cache rule configuration and then choose Create.

  9. Repeat the previous step for each pull through cache you want to create. The pull through cache rules are created separately for each Region.

To create a pull through cache rule (Amazon CLI)

Use the create-pull-through-cache-rule Amazon CLI command to create a pull through cache rule for an Amazon ECR private registry. For upstream registries that require authentication, you must store the credentials in an Secrets Manager secret. To create a secret using the Secrets Manager console, see Storing your upstream repository credentials in an Amazon Secrets Manager secret.

The following examples are provided for each supported upstream registry.

The following example creates a pull through cache rule for the Amazon ECR Public registry. It specifies a repository prefix of ecr-public, which results in each repository created using the pull through cache rule to have the naming scheme of ecr-public/upstream-repository-name.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix ecr-public \
     --upstream-registry-url public.ecr.aws \
     --region us-east-2

The following example creates a pull through cache rule for the Kubernetes public registry. It specifies a repository prefix of kubernetes, which results in each repository created using the pull through cache rule to have the naming scheme of kubernetes/upstream-repository-name.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix kubernetes \
     --upstream-registry-url registry.k8s.io \
     --region us-east-2

The following example creates a pull through cache rule for the Quay public registry. It specifies a repository prefix of quay, which results in each repository created using the pull through cache rule to have the naming scheme of quay/upstream-repository-name.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix quay \
     --upstream-registry-url quay.io \
     --region us-east-2

The following example creates a pull through cache rule for the Docker Hub registry. It specifies a repository prefix of docker-hub, which results in each repository created using the pull through cache rule to have the naming scheme of docker-hub/upstream-repository-name. You must specify the full Amazon Resource Name (ARN) of the secret containing your Docker Hub credentials.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix docker-hub \
     --upstream-registry-url registry-1.docker.io \
     --credential-arn arn:aws:secretsmanager:us-east-2:111122223333:secret:ecr-pullthroughcache/example1234 \
     --region us-east-2

The following example creates a pull through cache rule for the GitHub Container Registry. It specifies a repository prefix of docker-hub, which results in each repository created using the pull through cache rule to have the naming scheme of github/upstream-repository-name. You must specify the full Amazon Resource Name (ARN) of the secret containing your GitHub Container Registry credentials.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix github \
     --upstream-registry-url ghcr.io \
     --credential-arn arn:aws:secretsmanager:us-east-2:111122223333:secret:ecr-pullthroughcache/example1234 \
     --region us-east-2

The following example creates a pull through cache rule for the Microsoft Azure Container Registry. It specifies a repository prefix of azure, which results in each repository created using the pull through cache rule to have the naming scheme of azure/upstream-repository-name. You must specify the full Amazon Resource Name (ARN) of the secret containing your Microsoft Azure Container Registry credentials.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix azure \
     --upstream-registry-url myregistry.azurecr.io \
     --credential-arn arn:aws:secretsmanager:us-east-2:111122223333:secret:ecr-pullthroughcache/example1234 \
     --region us-east-2

The following example creates a pull through cache rule for the GitLab Container Registry. It specifies a repository prefix of gitlab, which results in each repository created using the pull through cache rule to have the naming scheme of gitlab/upstream-repository-name. You must specify the full Amazon Resource Name (ARN) of the secret containing your GitLab Container Registry credentials.

aws ecr create-pull-through-cache-rule \
     --ecr-repository-prefix gitlab \
     --upstream-registry-url registry.gitlab.com \
     --credential-arn arn:aws:secretsmanager:us-east-2:111122223333:secret:ecr-pullthroughcache/example1234 \
     --region us-east-2

Next steps

After you create your pull through cache rules, the following are the next steps: